[V6,3/7] dt-bindings: pinctrl: qcom: Add support for IPQ9574

Message ID 20230202150619.22425-4-quic_devipriy@quicinc.com
State New
Headers
Series Add minimal boot support for IPQ9574 |

Commit Message

Devi Priya Feb. 2, 2023, 3:06 p.m. UTC
  Add new binding document for pinctrl on IPQ9574

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
 .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml   | 137 ++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
  

Comments

Kathiravan Thirumoorthy Feb. 3, 2023, 5:50 a.m. UTC | #1
On 2/2/2023 8:36 PM, Devi Priya wrote:
> Add new binding document for pinctrl on IPQ9574
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
>   .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml   | 137 ++++++++++++++++++
>   1 file changed, 137 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> new file mode 100644
> index 000000000000..053b15ccb7a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@kernel.org>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> +
> +description:
> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
> +
> +properties:
> +  compatible:
> +    const: qcom,ipq9574-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +  "#interrupt-cells": true
> +  gpio-controller: true
> +  "#gpio-cells": true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +  gpio-reserved-ranges:
> +    minItems: 1
> +    maxItems: 33
> +
> +  gpio-line-names:
> +    maxItems: 65
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
> +        additionalProperties: false
> +
> +$defs:
> +  qcom-ipq9574-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
> +            - enum: [ qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_cmd,
> +                      qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3, sdc1_clk,
> +                      sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 8
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
> +                audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
> +                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
> +                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
> +                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
> +                cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
> +                gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc,
> +                mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk,
> +                pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,
> +                prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21,
> +                pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13,
> +                pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32,


Given that, In driver everything is grouped under a single name 'pwm', 
are these pwm function names as still valid?


> +                pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
> +                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
> +                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
> +                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
> +                qdss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
> +                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
> +                wci20, wci21, wsa_swrm ]
> +
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      bias-disable: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    tlmm: pinctrl@1000000 {
> +        compatible = "qcom,ipq9574-tlmm";
> +        reg = <0x01000000 0x300000>;
> +        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +        gpio-ranges = <&tlmm 0 0 65>;
> +
> +        uart2-state {
> +            pins = "gpio34", "gpio35";
> +            function = "blsp2_uart";
> +            drive-strength = <8>;
> +            bias-pull-down;
> +        };
> +    };
  
Devi Priya Feb. 6, 2023, 10:46 a.m. UTC | #2
Thanks for taking time to review the patch

On 2/3/2023 11:20 AM, Kathiravan T wrote:
> 
> On 2/2/2023 8:36 PM, Devi Priya wrote:
>> Add new binding document for pinctrl on IPQ9574
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>> ---
>>   .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml   | 137 ++++++++++++++++++
>>   1 file changed, 137 insertions(+)
>>   create mode 100644 
>> Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml 
>> b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
>> new file mode 100644
>> index 000000000000..053b15ccb7a5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
>> @@ -0,0 +1,137 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
>> +
>> +maintainers:
>> +  - Bjorn Andersson <andersson@kernel.org>
>> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> +
>> +description:
>> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
>> +
>> +properties:
>> +  compatible:
>> +    const: qcom,ipq9574-tlmm
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  interrupt-controller: true
>> +  "#interrupt-cells": true
>> +  gpio-controller: true
>> +  "#gpio-cells": true
>> +  gpio-ranges: true
>> +  wakeup-parent: true
>> +
>> +  gpio-reserved-ranges:
>> +    minItems: 1
>> +    maxItems: 33
>> +
>> +  gpio-line-names:
>> +    maxItems: 65
>> +
>> +patternProperties:
>> +  "-state$":
>> +    oneOf:
>> +      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
>> +      - patternProperties:
>> +          "-pins$":
>> +            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
>> +        additionalProperties: false
>> +
>> +$defs:
>> +  qcom-ipq9574-tlmm-state:
>> +    type: object
>> +    description:
>> +      Pinctrl node's client devices use subnodes for desired pin 
>> configuration.
>> +      Client device subnodes use below standard properties.
>> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> +    properties:
>> +      pins:
>> +        description:
>> +          List of gpio pins affected by the properties specified in this
>> +          subnode.
>> +        items:
>> +          oneOf:
>> +            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
>> +            - enum: [ qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, 
>> qdsd_cmd,
>> +                      qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3, 
>> sdc1_clk,
>> +                      sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, 
>> sdc2_data ]
>> +        minItems: 1
>> +        maxItems: 8
>> +
>> +      function:
>> +        description:
>> +          Specify the alternative function to be configured for the 
>> specified
>> +          pins.
>> +
>> +        enum: [ atest_char, atest_char0, atest_char1, atest_char2, 
>> atest_char3,
>> +                audio_pdm0, audio_pdm1, audio_pri, audio_sec, 
>> blsp0_spi, blsp0_uart,
>> +                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
>> +                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
>> +                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
>> +                cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
>> +                gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc,
>> +                mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, 
>> pcie2_clk,
>> +                pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, 
>> prng_rosc1,
>> +                prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, 
>> pta20, pta21,
>> +                pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, 
>> pwm12, pwm13,
>> +                pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, 
>> pwm31, pwm32,
> 
> 
> Given that, In driver everything is grouped under a single name 'pwm', 
> are these pwm function names as still valid?
Yes correct.
Have updated the bindings accordingly in V7
> 
> 
>> +                pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, 
>> qdss_cti_trig_in_b0,
>> +                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, 
>> qdss_cti_trig_out_a1,
>> +                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, 
>> qdss_traceclk_a,
>> +                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, 
>> qdss_tracedata_a,
>> +                qdss_tracedata_b, qdss_tracedata_b, qspi_clk, 
>> qspi_cs, qspi_data,
>> +                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, 
>> tsens_max,
>> +                wci20, wci21, wsa_swrm ]
>> +
>> +      bias-pull-down: true
>> +      bias-pull-up: true
>> +      bias-disable: true
>> +      drive-strength: true
>> +      input-enable: true
>> +      output-high: true
>> +      output-low: true
>> +
>> +    required:
>> +      - pins
>> +
>> +    additionalProperties: false
>> +
>> +allOf:
>> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    tlmm: pinctrl@1000000 {
>> +        compatible = "qcom,ipq9574-tlmm";
>> +        reg = <0x01000000 0x300000>;
>> +        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> +        gpio-controller;
>> +        #gpio-cells = <2>;
>> +        interrupt-controller;
>> +        #interrupt-cells = <2>;
>> +        gpio-ranges = <&tlmm 0 0 65>;
>> +
>> +        uart2-state {
>> +            pins = "gpio34", "gpio35";
>> +            function = "blsp2_uart";
>> +            drive-strength = <8>;
>> +            bias-pull-down;
>> +        };
>> +    };
Best Regards,
Devi Priya
  

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
new file mode 100644
index 000000000000..053b15ccb7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -0,0 +1,137 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq9574-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 33
+
+  gpio-line-names:
+    maxItems: 65
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq9574-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
+            - enum: [ qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_cmd,
+                      qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3, sdc1_clk,
+                      sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
+                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
+                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
+                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
+                cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
+                gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc,
+                mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk,
+                pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21,
+                pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13,
+                pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32,
+                pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
+                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
+                wci20, wci21, wsa_swrm ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq9574-tlmm";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 65>;
+
+        uart2-state {
+            pins = "gpio34", "gpio35";
+            function = "blsp2_uart";
+            drive-strength = <8>;
+            bias-pull-down;
+        };
+    };