[v4] iio: temperature: Add driver support for Maxim MAX30208

Message ID 20221020172218.804068-1-rajat.khandelwal@linux.intel.com
State New
Headers
Series [v4] iio: temperature: Add driver support for Maxim MAX30208 |

Commit Message

Rajat Khandelwal Oct. 20, 2022, 5:22 p.m. UTC
  Maxim MAX30208 is a digital temperature sensor with 0.1°C accuracy.

Add support for max30208 driver in iio subsystem.
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30208.pdf

Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
---

v4: Version comments go below line separator of signed-off-by

v3: Release the mutex lock after error gets returned

v2:
1. Removed TODO
2. Removed unnecessary blank spaces
3. Corrected MC->MILLICELCIUS
4. Comments added wherever required
5. dev_err on i2c fails
6. Rearranged some flows
7. Removed PROCESSED
8. int error return on gpio setup
9. device_register at the end of probe
10. Return on unsuccessful reset
11. acpi_match_table and of_match_table added
12. Minor quirks

module_i2c_driver() can't be added since module_init and module_exit
are added explicitly.

 MAINTAINERS                        |   6 +
 drivers/iio/temperature/Kconfig    |  10 +
 drivers/iio/temperature/Makefile   |   1 +
 drivers/iio/temperature/max30208.c | 322 +++++++++++++++++++++++++++++
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/iio/temperature/max30208.c
  

Comments

kernel test robot Oct. 21, 2022, 9:42 p.m. UTC | #1
Hi Rajat,

I love your patch! Perhaps something to improve:

[auto build test WARNING on jic23-iio/togreg]
[also build test WARNING on linus/master v6.1-rc1 next-20221021]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Rajat-Khandelwal/iio-temperature-Add-driver-support-for-Maxim-MAX30208/20221020-110702
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
patch link:    https://lore.kernel.org/r/20221020172218.804068-1-rajat.khandelwal%40linux.intel.com
patch subject: [PATCH v4] iio: temperature: Add driver support for Maxim MAX30208
config: hexagon-allyesconfig
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 791a7ae1ba3efd6bca96338e10ffde557ba83920)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/f896debd5c89461101c7976cee05a454b71c284f
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Rajat-Khandelwal/iio-temperature-Add-driver-support-for-Maxim-MAX30208/20221020-110702
        git checkout f896debd5c89461101c7976cee05a454b71c284f
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash drivers/iio/temperature/ drivers/media/cec/usb/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/iio/temperature/max30208.c:286:36: warning: unused variable 'max30208_acpi_match' [-Wunused-const-variable]
   static const struct acpi_device_id max30208_acpi_match[] = {
                                      ^
   1 warning generated.


vim +/max30208_acpi_match +286 drivers/iio/temperature/max30208.c

   285	
 > 286	static const struct acpi_device_id max30208_acpi_match[] = {
   287		{ "MAX30208" },
   288		{ },
   289	};
   290	MODULE_DEVICE_TABLE(acpi, max30208_acpi_match);
   291
  
Jonathan Cameron Oct. 23, 2022, 12:19 p.m. UTC | #2
On Thu, 20 Oct 2022 22:52:18 +0530
Rajat Khandelwal <rajat.khandelwal@linux.intel.com> wrote:

> Maxim MAX30208 is a digital temperature sensor with 0.1°C accuracy.
> 
> Add support for max30208 driver in iio subsystem.
> Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30208.pdf
> 
> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>

Hi Rajat, review on basis that v5 will be cc'd to 
HARDWARE MONITORING
M:	Jean Delvare <jdelvare@suse.com>
M:	Guenter Roeck <linux@roeck-us.net>
L:	linux-hwmon@vger.kernel.org

with the open question on whether they consider it acceptable for this driver
to be in IIO. Main argument in favour is it's an expensive clinical grade sensor
so fairly unlikely to be used in classic hardware monitoring circumstances.

Anyhow a few comments inline.

Thanks,

Jonathan


> ---
> 
> v4: Version comments go below line separator of signed-off-by
> 
> v3: Release the mutex lock after error gets returned
> 
> v2:
> 1. Removed TODO
> 2. Removed unnecessary blank spaces
> 3. Corrected MC->MILLICELCIUS
> 4. Comments added wherever required
> 5. dev_err on i2c fails
> 6. Rearranged some flows
> 7. Removed PROCESSED
> 8. int error return on gpio setup
> 9. device_register at the end of probe
> 10. Return on unsuccessful reset
> 11. acpi_match_table and of_match_table added
> 12. Minor quirks
> 
> module_i2c_driver() can't be added since module_init and module_exit
> are added explicitly.
> 
>  MAINTAINERS                        |   6 +
>  drivers/iio/temperature/Kconfig    |  10 +
>  drivers/iio/temperature/Makefile   |   1 +
>  drivers/iio/temperature/max30208.c | 322 +++++++++++++++++++++++++++++
>  4 files changed, 339 insertions(+)
>  create mode 100644 drivers/iio/temperature/max30208.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f1390b8270b2..7f1fd2e31b94 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12373,6 +12373,12 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
>  F:	drivers/regulator/max20086-regulator.c
>  
> +MAXIM MAX30208 TEMPERATURE SENSOR DRIVER
> +M:	Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
> +L:	linux-iio@vger.kernel.org
> +S:	Maintained
> +F:	drivers/iio/temperature/max30208.c
> +
>  MAXIM MAX77650 PMIC MFD DRIVER
>  M:	Bartosz Golaszewski <brgl@bgdev.pl>
>  L:	linux-kernel@vger.kernel.org
> diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
> index e8ed849e3b76..ed384f33e0c7 100644
> --- a/drivers/iio/temperature/Kconfig
> +++ b/drivers/iio/temperature/Kconfig
> @@ -128,6 +128,16 @@ config TSYS02D
>  	  This driver can also be built as a module. If so, the module will
>  	  be called tsys02d.
>  
> +config MAX30208
> +	tristate "Maxim MAX30208 digital temperature sensor"
> +	depends on I2C
> +	help
> +	  If you say yes here you get support for Maxim MAX30208
> +	  digital temperature sensor connected via I2C.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called max30208.
> +
>  config MAX31856
>  	tristate "MAX31856 thermocouple sensor"
>  	depends on SPI
> diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
> index dd08e562ffe0..dfec8c6d3019 100644
> --- a/drivers/iio/temperature/Makefile
> +++ b/drivers/iio/temperature/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_IQS620AT_TEMP) += iqs620at-temp.o
>  obj-$(CONFIG_LTC2983) += ltc2983.o
>  obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
>  obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
> +obj-$(CONFIG_MAX30208) += max30208.o
>  obj-$(CONFIG_MAX31856) += max31856.o
>  obj-$(CONFIG_MAX31865) += max31865.o
>  obj-$(CONFIG_MLX90614) += mlx90614.o
> diff --git a/drivers/iio/temperature/max30208.c b/drivers/iio/temperature/max30208.c
> new file mode 100644
> index 000000000000..35a778ea9395
> --- /dev/null
> +++ b/drivers/iio/temperature/max30208.c
> @@ -0,0 +1,322 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Copyright (c) Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
> + *
> + * Maxim MAX30208 digital temperature sensor with 0.1°C accuracy
> + * (7-bit I2C slave address (0x50 - 0x53))
> + *
> + * Note: This driver sets GPIO1 to behave as input for temperature
> + * conversion and GPIO0 to act as interrupt for temperature conversion.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +
> +#define MAX30208_DRV_NAME		"max30208"
> +
> +#define MAX30208_STATUS			0x00
> +#define MAX30208_STATUS_TEMP_RDY	BIT(0)
> +#define MAX30208_INT_ENABLE		0x01
> +#define MAX30208_INT_ENABLE_TEMP_RDY	BIT(0)
> +
> +#define MAX30208_FIFO_OVF_CNTR		0x06
> +#define MAX30208_FIFO_DATA_CNTR		0x07
> +#define MAX30208_FIFO_DATA		0x08
> +
> +#define MAX30208_SYSTEM_CTRL		0x0c
> +#define MAX30208_SYSTEM_CTRL_RESET	0x01
> +
> +#define MAX30208_TEMP_SENSOR_SETUP	0x14
> +#define MAX30208_TEMP_SENSOR_SETUP_CONV	BIT(0)
> +
> +#define MAX30208_GPIO_SETUP		0x20
> +#define MAX30208_GPIO1_SETUP		GENMASK(7, 6)
> +#define MAX30208_GPIO0_SETUP		GENMASK(1, 0)
> +#define MAX30208_GPIO_CTRL		0x21
> +#define MAX30208_GPIO1_CTRL		BIT(3)
> +#define MAX30208_GPIO0_CTRL		BIT(0)
> +
> +#define MAX30208_RES_MILLICELCIUS	5
> +
> +struct max30208_data {
> +	struct i2c_client *client;
> +	struct iio_dev *indio_dev;
> +	struct mutex lock; /* Lock to prevent concurrent reads */
> +};
> +
> +static const struct iio_chan_spec max30208_channels[] = {
> +	{
> +		.type = IIO_TEMP,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> +	},
> +};
> +
> +/**
> + * max30208_request() - Request a reading
> + * @data: Struct comprising member elements of the device
> + *
> + * Requests a reading from the device and waits until the conversion is ready.
> + */
> +static int max30208_request(struct max30208_data *data)
> +{
> +	int retries = 10; /*
> +			   * Sensor can take up to 500 ms to respond so execute a
> +			   * total of 10 retries to give the device sufficient time.
> +			   */

Move the comment to the line above int retries.  Will be more readable there and still
clear what it refers to.

> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(data->client, MAX30208_TEMP_SENSOR_SETUP);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error reading reg temperature setup\n");
> +		return ret;
> +	}
> +
> +	ret |= MAX30208_TEMP_SENSOR_SETUP_CONV;
As below, I'd suggest a local u8 variable for building up register values.
> +
> +	ret = i2c_smbus_write_byte_data(data->client, MAX30208_TEMP_SENSOR_SETUP, ret);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error writing reg temperature setup\n");
> +		return ret;
> +	}
> +
> +	while (retries--) {
> +		ret = i2c_smbus_read_byte_data(data->client, MAX30208_STATUS);
> +		if (ret < 0) {
> +			dev_err(&data->client->dev, "Error reading reg status\n");
> +			goto sleep;
> +		}
> +
> +		if (ret & MAX30208_STATUS_TEMP_RDY)
> +			return 0;
> +
> +		msleep(50);
> +	}
> +	dev_warn(&data->client->dev, "Temperature conversion failed\n");
> +
> +	return 0;
> +
> +sleep:
> +	usleep_range(50000, 60000);
> +	return 0;
> +}
> +
> +static int max30208_update_temp(struct max30208_data *data)
> +{
> +	s8 data_count;

It's signed?  That's unusual for a counter...  looking quickly at datasheet
looks like it's actually a 5 bit unsigned counter so this won't matter.
Probably better to use a u8 though to avoid any confusion.


> +	int ret;
> +
> +	mutex_lock(&data->lock);
> +
> +	ret = max30208_request(data);
> +	if (ret < 0)
> +		goto unlock;
> +
> +	ret = i2c_smbus_read_byte_data(data->client, MAX30208_FIFO_OVF_CNTR);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error reading reg FIFO overflow counter\n");
> +		goto unlock;
> +	} else if (!ret) {
> +		ret = i2c_smbus_read_byte_data(data->client,
> +					       MAX30208_FIFO_DATA_CNTR);
> +		if (ret < 0) {
> +			dev_err(&data->client->dev, "Error reading reg FIFO data counter\n");
> +			goto unlock;
> +		}
> +	}
> +
> +	data_count = ret;
> +
> +	/*
> +	 * Ideally, counter should decrease by 1 each time a word is read from FIFO.
> +	 * However, practically, the device behaves erroneously and counter sometimes
> +	 * decreases by more than 1.

This is a very odd hardware bug.  Any public errata reference or similar we can add
here for anyone wanting more information?

>          Hence, do not loop the counter until it becomes 0
> +	 * rather, use the exact counter value after each FIFO word is read.
> +	 * Return the last reading from FIFO as the most recently triggered one.
> +	 */
> +	while (data_count) {
> +		ret = i2c_smbus_read_word_swapped(data->client,
> +						  MAX30208_FIFO_DATA);
> +		if (ret < 0) {
> +			dev_err(&data->client->dev, "Error reading reg FIFO data\n");
> +			goto unlock;
> +		}
> +
> +		data_count = i2c_smbus_read_byte_data(data->client,
> +						      MAX30208_FIFO_DATA_CNTR);
> +		if (data_count < 0) {
> +			dev_err(&data->client->dev, "Error reading reg FIFO data counter\n");
> +			ret = data_count;
> +			goto unlock;
> +		}
> +	}
> +
> +unlock:
> +	mutex_unlock(&data->lock);
> +	return ret;
> +}
> +
> +static int max30208_read(struct iio_dev *indio_dev,
> +			 struct iio_chan_spec const *chan,
> +			 int *val, int *val2, long mask)
> +{
> +	struct max30208_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = max30208_update_temp(data);
> +		if (ret < 0)
> +			return ret;
> +
> +		*val = sign_extend32(ret, 15);
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = MAX30208_RES_MILLICELCIUS;

Given this define is only used in one place + isn't a magic value (it is the actual
resolution!) I'd prefer to see the number directly here.

> +		return IIO_VAL_INT;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int max30208_gpio_setup(struct max30208_data *data)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(data->client,
> +				       MAX30208_GPIO_SETUP);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error reading reg GPIO setup\n");
> +		return ret;
> +	}
> +
> +	/*
> +	 * Setting GPIO1 to trigger temperature conversion
> +	 * when driven low.
> +	 * Setting GPIO0 to trigger interrupt when temperature
> +	 * conversion gets completed.
> +	 */
> +	ret |= MAX30208_GPIO1_SETUP | MAX30208_GPIO0_SETUP;
It is cleaner to use a local u8 variable to build up the register value rather than
using the integer that is returned directly. 

	u8 regval;

	regval = 
	regval = ret | ....

	... write_byte_data(..., regval);

etc as it keeps the types involved clean and makes it clear to a compiler that
we are deliberately truncating the return value etc.


> +	ret = i2c_smbus_write_byte_data(data->client,
> +					MAX30208_GPIO_SETUP, ret);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error writing reg GPIO setup\n");
> +		return ret;
> +	}
> +
> +	ret = i2c_smbus_read_byte_data(data->client,
> +				       MAX30208_INT_ENABLE);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error reading reg interrupt enable\n");
> +		return ret;
> +	}
> +
> +	/* Enabling GPIO0 interrupt */
> +	ret |= MAX30208_INT_ENABLE_TEMP_RDY;
> +	ret = i2c_smbus_write_byte_data(data->client,
> +					MAX30208_INT_ENABLE, ret);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Error writing reg interrupt enable\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct iio_info max30208_info = {
> +	.read_raw = max30208_read,
> +};
> +
> +static int max30208_probe(struct i2c_client *i2c)
> +{
> +	struct device *dev = &i2c->dev;
> +	struct max30208_data *data;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	data->client = i2c;
> +	mutex_init(&data->lock);
> +
> +	indio_dev->name = MAX30208_DRV_NAME;
> +	indio_dev->channels = max30208_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(max30208_channels);
> +	indio_dev->info = &max30208_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	/* Reset the device initially */
> +	ret = i2c_smbus_write_byte_data(data->client, MAX30208_SYSTEM_CTRL,
> +					MAX30208_SYSTEM_CTRL_RESET);
> +	if (ret) {
> +		dev_err(dev, "Failure in performing reset\n");
> +		return ret;
> +	}
> +
> +	usleep_range(50000, 60000);
> +
> +	ret = max30208_gpio_setup(data);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_iio_device_register(dev, indio_dev);
> +	if (ret) {
> +		dev_err(dev, "Failed to register IIO device\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id max30208_id_table[] = {
> +	{ "max30208" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(i2c, max30208_id_table);
> +
> +static const struct acpi_device_id max30208_acpi_match[] = {
> +	{ "MAX30208" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(acpi, max30208_acpi_match);
> +
> +static const struct of_device_id max30208_of_match[] = {
> +	{ .compatible = "maxim,max30208" },
> +	{ },

No need for comma on 'NULL' terminators.  We won't ever add another entry
after then so it is good to make it harder to do that acccidentally.
	{ }
};

> +};
> +MODULE_DEVICE_TABLE(of, max30208_of_match);
> +
> +static struct i2c_driver max30208_driver = {
> +	.driver = {
> +		.name = MAX30208_DRV_NAME,
> +		.of_match_table = max30208_of_match,
> +		.acpi_match_table = ACPI_PTR(max30208_acpi_match),

As per the build warning, don't bother with ACPI_PTR().
It saves a tiny bit on the size of the driver, but at the cost of needing
to use ifdef or __maybe_unused.  Now if someone made that work in a similar
fashion to pm_ptr() that doesn't suffer this problem then I'd be happier seeing
it in drivers. 

> +	},
> +	.probe_new = max30208_probe,
> +	.id_table = max30208_id_table,
> +};
> +
> +static int __init max30208_init(void)
> +{
> +	return i2c_add_driver(&max30208_driver);
> +}
> +module_init(max30208_init);
> +
> +static void __exit max30208_exit(void)
> +{
> +	i2c_del_driver(&max30208_driver);
> +}
> +module_exit(max30208_exit);
> +
> +MODULE_AUTHOR("Rajat Khandelwal <rajat.khandelwal@linux.intel.com>");
> +MODULE_DESCRIPTION("Maxim MAX30208 digital temperature sensor");
> +MODULE_LICENSE("GPL");
  

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index f1390b8270b2..7f1fd2e31b94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12373,6 +12373,12 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
 F:	drivers/regulator/max20086-regulator.c
 
+MAXIM MAX30208 TEMPERATURE SENSOR DRIVER
+M:	Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/temperature/max30208.c
+
 MAXIM MAX77650 PMIC MFD DRIVER
 M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-kernel@vger.kernel.org
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index e8ed849e3b76..ed384f33e0c7 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -128,6 +128,16 @@  config TSYS02D
 	  This driver can also be built as a module. If so, the module will
 	  be called tsys02d.
 
+config MAX30208
+	tristate "Maxim MAX30208 digital temperature sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for Maxim MAX30208
+	  digital temperature sensor connected via I2C.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max30208.
+
 config MAX31856
 	tristate "MAX31856 thermocouple sensor"
 	depends on SPI
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index dd08e562ffe0..dfec8c6d3019 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -7,6 +7,7 @@  obj-$(CONFIG_IQS620AT_TEMP) += iqs620at-temp.o
 obj-$(CONFIG_LTC2983) += ltc2983.o
 obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
 obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
+obj-$(CONFIG_MAX30208) += max30208.o
 obj-$(CONFIG_MAX31856) += max31856.o
 obj-$(CONFIG_MAX31865) += max31865.o
 obj-$(CONFIG_MLX90614) += mlx90614.o
diff --git a/drivers/iio/temperature/max30208.c b/drivers/iio/temperature/max30208.c
new file mode 100644
index 000000000000..35a778ea9395
--- /dev/null
+++ b/drivers/iio/temperature/max30208.c
@@ -0,0 +1,322 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright (c) Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
+ *
+ * Maxim MAX30208 digital temperature sensor with 0.1°C accuracy
+ * (7-bit I2C slave address (0x50 - 0x53))
+ *
+ * Note: This driver sets GPIO1 to behave as input for temperature
+ * conversion and GPIO0 to act as interrupt for temperature conversion.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define MAX30208_DRV_NAME		"max30208"
+
+#define MAX30208_STATUS			0x00
+#define MAX30208_STATUS_TEMP_RDY	BIT(0)
+#define MAX30208_INT_ENABLE		0x01
+#define MAX30208_INT_ENABLE_TEMP_RDY	BIT(0)
+
+#define MAX30208_FIFO_OVF_CNTR		0x06
+#define MAX30208_FIFO_DATA_CNTR		0x07
+#define MAX30208_FIFO_DATA		0x08
+
+#define MAX30208_SYSTEM_CTRL		0x0c
+#define MAX30208_SYSTEM_CTRL_RESET	0x01
+
+#define MAX30208_TEMP_SENSOR_SETUP	0x14
+#define MAX30208_TEMP_SENSOR_SETUP_CONV	BIT(0)
+
+#define MAX30208_GPIO_SETUP		0x20
+#define MAX30208_GPIO1_SETUP		GENMASK(7, 6)
+#define MAX30208_GPIO0_SETUP		GENMASK(1, 0)
+#define MAX30208_GPIO_CTRL		0x21
+#define MAX30208_GPIO1_CTRL		BIT(3)
+#define MAX30208_GPIO0_CTRL		BIT(0)
+
+#define MAX30208_RES_MILLICELCIUS	5
+
+struct max30208_data {
+	struct i2c_client *client;
+	struct iio_dev *indio_dev;
+	struct mutex lock; /* Lock to prevent concurrent reads */
+};
+
+static const struct iio_chan_spec max30208_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+/**
+ * max30208_request() - Request a reading
+ * @data: Struct comprising member elements of the device
+ *
+ * Requests a reading from the device and waits until the conversion is ready.
+ */
+static int max30208_request(struct max30208_data *data)
+{
+	int retries = 10; /*
+			   * Sensor can take up to 500 ms to respond so execute a
+			   * total of 10 retries to give the device sufficient time.
+			   */
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, MAX30208_TEMP_SENSOR_SETUP);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg temperature setup\n");
+		return ret;
+	}
+
+	ret |= MAX30208_TEMP_SENSOR_SETUP_CONV;
+
+	ret = i2c_smbus_write_byte_data(data->client, MAX30208_TEMP_SENSOR_SETUP, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg temperature setup\n");
+		return ret;
+	}
+
+	while (retries--) {
+		ret = i2c_smbus_read_byte_data(data->client, MAX30208_STATUS);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error reading reg status\n");
+			goto sleep;
+		}
+
+		if (ret & MAX30208_STATUS_TEMP_RDY)
+			return 0;
+
+		msleep(50);
+	}
+	dev_warn(&data->client->dev, "Temperature conversion failed\n");
+
+	return 0;
+
+sleep:
+	usleep_range(50000, 60000);
+	return 0;
+}
+
+static int max30208_update_temp(struct max30208_data *data)
+{
+	s8 data_count;
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = max30208_request(data);
+	if (ret < 0)
+		goto unlock;
+
+	ret = i2c_smbus_read_byte_data(data->client, MAX30208_FIFO_OVF_CNTR);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg FIFO overflow counter\n");
+		goto unlock;
+	} else if (!ret) {
+		ret = i2c_smbus_read_byte_data(data->client,
+					       MAX30208_FIFO_DATA_CNTR);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error reading reg FIFO data counter\n");
+			goto unlock;
+		}
+	}
+
+	data_count = ret;
+
+	/*
+	 * Ideally, counter should decrease by 1 each time a word is read from FIFO.
+	 * However, practically, the device behaves erroneously and counter sometimes
+	 * decreases by more than 1. Hence, do not loop the counter until it becomes 0
+	 * rather, use the exact counter value after each FIFO word is read.
+	 * Return the last reading from FIFO as the most recently triggered one.
+	 */
+	while (data_count) {
+		ret = i2c_smbus_read_word_swapped(data->client,
+						  MAX30208_FIFO_DATA);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error reading reg FIFO data\n");
+			goto unlock;
+		}
+
+		data_count = i2c_smbus_read_byte_data(data->client,
+						      MAX30208_FIFO_DATA_CNTR);
+		if (data_count < 0) {
+			dev_err(&data->client->dev, "Error reading reg FIFO data counter\n");
+			ret = data_count;
+			goto unlock;
+		}
+	}
+
+unlock:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int max30208_read(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan,
+			 int *val, int *val2, long mask)
+{
+	struct max30208_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = max30208_update_temp(data);
+		if (ret < 0)
+			return ret;
+
+		*val = sign_extend32(ret, 15);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = MAX30208_RES_MILLICELCIUS;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int max30208_gpio_setup(struct max30208_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client,
+				       MAX30208_GPIO_SETUP);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg GPIO setup\n");
+		return ret;
+	}
+
+	/*
+	 * Setting GPIO1 to trigger temperature conversion
+	 * when driven low.
+	 * Setting GPIO0 to trigger interrupt when temperature
+	 * conversion gets completed.
+	 */
+	ret |= MAX30208_GPIO1_SETUP | MAX30208_GPIO0_SETUP;
+	ret = i2c_smbus_write_byte_data(data->client,
+					MAX30208_GPIO_SETUP, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg GPIO setup\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client,
+				       MAX30208_INT_ENABLE);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg interrupt enable\n");
+		return ret;
+	}
+
+	/* Enabling GPIO0 interrupt */
+	ret |= MAX30208_INT_ENABLE_TEMP_RDY;
+	ret = i2c_smbus_write_byte_data(data->client,
+					MAX30208_INT_ENABLE, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg interrupt enable\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct iio_info max30208_info = {
+	.read_raw = max30208_read,
+};
+
+static int max30208_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct max30208_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = i2c;
+	mutex_init(&data->lock);
+
+	indio_dev->name = MAX30208_DRV_NAME;
+	indio_dev->channels = max30208_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max30208_channels);
+	indio_dev->info = &max30208_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* Reset the device initially */
+	ret = i2c_smbus_write_byte_data(data->client, MAX30208_SYSTEM_CTRL,
+					MAX30208_SYSTEM_CTRL_RESET);
+	if (ret) {
+		dev_err(dev, "Failure in performing reset\n");
+		return ret;
+	}
+
+	usleep_range(50000, 60000);
+
+	ret = max30208_gpio_setup(data);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret) {
+		dev_err(dev, "Failed to register IIO device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id max30208_id_table[] = {
+	{ "max30208" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max30208_id_table);
+
+static const struct acpi_device_id max30208_acpi_match[] = {
+	{ "MAX30208" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, max30208_acpi_match);
+
+static const struct of_device_id max30208_of_match[] = {
+	{ .compatible = "maxim,max30208" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max30208_of_match);
+
+static struct i2c_driver max30208_driver = {
+	.driver = {
+		.name = MAX30208_DRV_NAME,
+		.of_match_table = max30208_of_match,
+		.acpi_match_table = ACPI_PTR(max30208_acpi_match),
+	},
+	.probe_new = max30208_probe,
+	.id_table = max30208_id_table,
+};
+
+static int __init max30208_init(void)
+{
+	return i2c_add_driver(&max30208_driver);
+}
+module_init(max30208_init);
+
+static void __exit max30208_exit(void)
+{
+	i2c_del_driver(&max30208_driver);
+}
+module_exit(max30208_exit);
+
+MODULE_AUTHOR("Rajat Khandelwal <rajat.khandelwal@linux.intel.com>");
+MODULE_DESCRIPTION("Maxim MAX30208 digital temperature sensor");
+MODULE_LICENSE("GPL");