deleted file mode 100644
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/irondevice,sma1303.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Iron Device SMA1303 Audio Amplifier
-
-maintainers:
- - Kiseok Jo <kiseok.jo@irondevice.com>
-
-description:
- SMA1303 digital class-D audio amplifier with an integrated boost converter.
-
-allOf:
- - $ref: name-prefix.yaml#
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- - |
- i2c_bus {
- amplifier@1e {
- compatible = "irondevice,sma1303";
- reg = <0x1e>;
- };
- };
@@ -645,8 +645,6 @@ patternProperties:
description: Inverse Path
"^iom,.*":
description: Iomega Corporation
- "^irondevice,.*":
- description: Iron Device Corporation
"^isee,.*":
description: ISEE 2007 S.L.
"^isil,.*":
@@ -206,7 +206,6 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_SI476X
imply SND_SOC_SIMPLE_AMPLIFIER
imply SND_SOC_SIMPLE_MUX
- imply SND_SOC_SMA1303
imply SND_SOC_SPDIF
imply SND_SOC_SRC4XXX_I2C
imply SND_SOC_SSM2305
@@ -1493,12 +1492,6 @@ config SND_SOC_SIMPLE_MUX
tristate "Simple Audio Mux"
depends on GPIOLIB
-config SND_SOC_SMA1303
- tristate "Iron Device SMA1303 Audio Amplifier"
- depends on I2C
- help
- Enable support for Iron Device SMA1303 Boosted Class-D amplifier
-
config SND_SOC_SPDIF
tristate "S/PDIF CODEC"
@@ -233,7 +233,6 @@ snd-soc-sigmadsp-objs := sigmadsp.o
snd-soc-sigmadsp-i2c-objs := sigmadsp-i2c.o
snd-soc-sigmadsp-regmap-objs := sigmadsp-regmap.o
snd-soc-si476x-objs := si476x.o
-snd-soc-sma1303-objs := sma1303.o
snd-soc-spdif-tx-objs := spdif_transmitter.o
snd-soc-spdif-rx-objs := spdif_receiver.o
snd-soc-src4xxx-objs := src4xxx.o
@@ -589,7 +588,6 @@ obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o
obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o
obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o
obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o
-obj-$(CONFIG_SND_SOC_SMA1303) += snd-soc-sma1303.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o
obj-$(CONFIG_SND_SOC_SRC4XXX) += snd-soc-src4xxx.o
obj-$(CONFIG_SND_SOC_SRC4XXX_I2C) += snd-soc-src4xxx-i2c.o
deleted file mode 100644
@@ -1,1804 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-//
-// sma1303.c -- sma1303 ALSA SoC Audio driver
-//
-// Copyright 2023 Iron Device Corporation
-//
-// Auther: Gyuhwa Park <gyuhwa.park@irondevice.com>
-// Kiseok Jo <kiseok.jo@irondevice.com>
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/i2c.h>
-#include <linux/regmap.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <sound/initval.h>
-#include <sound/tlv.h>
-#include <linux/of_device.h>
-#include <linux/slab.h>
-#include <asm/div64.h>
-
-#include "sma1303.h"
-
-#define CHECK_PERIOD_TIME 1 /* sec per HZ */
-#define MAX_CONTROL_NAME 48
-
-#define PLL_MATCH(_input_clk_name, _output_clk_name, _input_clk,\
- _post_n, _n, _vco, _p_cp)\
-{\
- .input_clk_name = _input_clk_name,\
- .output_clk_name = _output_clk_name,\
- .input_clk = _input_clk,\
- .post_n = _post_n,\
- .n = _n,\
- .vco = _vco,\
- .p_cp = _p_cp,\
-}
-
-enum sma1303_type {
- SMA1303,
-};
-
-struct sma1303_pll_match {
- char *input_clk_name;
- char *output_clk_name;
- unsigned int input_clk;
- unsigned int post_n;
- unsigned int n;
- unsigned int vco;
- unsigned int p_cp;
-};
-
-struct sma1303_priv {
- enum sma1303_type devtype;
- struct attribute_group *attr_grp;
- struct delayed_work check_fault_work;
- struct device *dev;
- struct kobject *kobj;
- struct regmap *regmap;
- struct sma1303_pll_match *pll_matches;
- bool amp_power_status;
- bool force_mute_status;
- int num_of_pll_matches;
- int retry_cnt;
- unsigned int amp_mode;
- unsigned int cur_vol;
- unsigned int format;
- unsigned int frame_size;
- unsigned int init_vol;
- unsigned int last_bclk;
- unsigned int last_ocp_val;
- unsigned int last_over_temp;
- unsigned int rev_num;
- unsigned int sys_clk_id;
- unsigned int tdm_slot_rx;
- unsigned int tdm_slot_tx;
- unsigned int tsdw_cnt;
- long check_fault_period;
- long check_fault_status;
-};
-
-static struct sma1303_pll_match sma1303_pll_matches[] = {
-PLL_MATCH("1.411MHz", "24.595MHz", 1411200, 0x07, 0xF4, 0x8B, 0x03),
-PLL_MATCH("1.536MHz", "24.576MHz", 1536000, 0x07, 0xE0, 0x8B, 0x03),
-PLL_MATCH("3.072MHz", "24.576MHz", 3072000, 0x07, 0x70, 0x8B, 0x03),
-PLL_MATCH("6.144MHz", "24.576MHz", 6144000, 0x07, 0x70, 0x8B, 0x07),
-PLL_MATCH("12.288MHz", "24.576MHz", 12288000, 0x07, 0x70, 0x8B, 0x0B),
-PLL_MATCH("19.2MHz", "24.343MHz", 19200000, 0x07, 0x47, 0x8B, 0x0A),
-PLL_MATCH("24.576MHz", "24.576MHz", 24576000, 0x07, 0x70, 0x8B, 0x0F),
-};
-
-static int sma1303_startup(struct snd_soc_component *);
-static int sma1303_shutdown(struct snd_soc_component *);
-
-static const struct reg_default sma1303_reg_def[] = {
- { 0x00, 0x80 },
- { 0x01, 0x00 },
- { 0x02, 0x00 },
- { 0x03, 0x11 },
- { 0x04, 0x17 },
- { 0x09, 0x00 },
- { 0x0A, 0x31 },
- { 0x0B, 0x98 },
- { 0x0C, 0x84 },
- { 0x0D, 0x07 },
- { 0x0E, 0x3F },
- { 0x10, 0x00 },
- { 0x11, 0x00 },
- { 0x12, 0x00 },
- { 0x14, 0x5C },
- { 0x15, 0x01 },
- { 0x16, 0x0F },
- { 0x17, 0x0F },
- { 0x18, 0x0F },
- { 0x19, 0x00 },
- { 0x1A, 0x00 },
- { 0x1B, 0x00 },
- { 0x23, 0x19 },
- { 0x24, 0x00 },
- { 0x25, 0x00 },
- { 0x26, 0x04 },
- { 0x33, 0x00 },
- { 0x36, 0x92 },
- { 0x37, 0x27 },
- { 0x3B, 0x5A },
- { 0x3C, 0x20 },
- { 0x3D, 0x00 },
- { 0x3E, 0x03 },
- { 0x3F, 0x0C },
- { 0x8B, 0x07 },
- { 0x8C, 0x70 },
- { 0x8D, 0x8B },
- { 0x8E, 0x6F },
- { 0x8F, 0x03 },
- { 0x90, 0x26 },
- { 0x91, 0x42 },
- { 0x92, 0xE0 },
- { 0x94, 0x35 },
- { 0x95, 0x0C },
- { 0x96, 0x42 },
- { 0x97, 0x95 },
- { 0xA0, 0x00 },
- { 0xA1, 0x3B },
- { 0xA2, 0xC8 },
- { 0xA3, 0x28 },
- { 0xA4, 0x40 },
- { 0xA5, 0x01 },
- { 0xA6, 0x41 },
- { 0xA7, 0x00 },
-};
-
-static bool sma1303_readable_register(struct device *dev, unsigned int reg)
-{
- bool result;
-
- if (reg > SMA1303_FF_DEVICE_INDEX)
- return false;
-
- switch (reg) {
- case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4:
- case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL:
- case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3:
- case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7:
- case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4:
- case SMA1303_33_SDM_CTRL ... SMA1303_34_OTP_DATA1:
- case SMA1303_36_PROTECTION ... SMA1303_38_OTP_TRM0:
- case SMA1303_3B_TEST1 ... SMA1303_3F_ATEST2:
- case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL:
- case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4:
- case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON:
- case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2:
- result = true;
- break;
- case SMA1303_FF_DEVICE_INDEX:
- result = true;
- break;
- default:
- result = false;
- break;
- }
- return result;
-}
-
-static bool sma1303_writeable_register(struct device *dev, unsigned int reg)
-{
- bool result;
-
- if (reg > SMA1303_FF_DEVICE_INDEX)
- return false;
-
- switch (reg) {
- case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4:
- case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL:
- case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3:
- case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7:
- case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4:
- case SMA1303_33_SDM_CTRL:
- case SMA1303_36_PROTECTION ... SMA1303_37_SLOPE_CTRL:
- case SMA1303_3B_TEST1 ... SMA1303_3F_ATEST2:
- case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL:
- case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4:
- case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON:
- result = true;
- break;
- default:
- result = false;
- break;
- }
- return result;
-}
-
-static bool sma1303_volatile_register(struct device *dev, unsigned int reg)
-{
- bool result;
-
- switch (reg) {
- case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2:
- result = true;
- break;
- case SMA1303_FF_DEVICE_INDEX:
- result = true;
- break;
- default:
- result = false;
- break;
- }
- return result;
-}
-
-static const DECLARE_TLV_DB_SCALE(sma1303_spk_tlv, -6000, 50, 0);
-
-static int sma1303_regmap_write(struct sma1303_priv *sma1303,
- unsigned int reg, unsigned int val)
-{
- int ret = 0;
- int cnt = sma1303->retry_cnt;
-
- while (cnt--) {
- ret = regmap_write(sma1303->regmap, reg, val);
- if (ret < 0) {
- dev_err(sma1303->dev,
- "Failed to write [0x%02X]\n", reg);
- } else
- break;
- }
- return ret;
-}
-
-static int sma1303_regmap_update_bits(struct sma1303_priv *sma1303,
- unsigned int reg, unsigned int mask, unsigned int val, bool *change)
-{
- int ret = 0;
- int cnt = sma1303->retry_cnt;
-
- while (cnt--) {
- ret = regmap_update_bits_check(sma1303->regmap, reg,
- mask, val, change);
- if (ret < 0) {
- dev_err(sma1303->dev,
- "Failed to update [0x%02X]\n", reg);
- } else
- break;
- }
- return ret;
-}
-
-static int sma1303_regmap_read(struct sma1303_priv *sma1303,
- unsigned int reg, unsigned int *val)
-{
- int ret = 0;
- int cnt = sma1303->retry_cnt;
-
- while (cnt--) {
- ret = regmap_read(sma1303->regmap, reg, val);
- if (ret < 0) {
- dev_err(sma1303->dev,
- "Failed to read [0x%02X]\n", reg);
- } else
- break;
- }
- return ret;
-}
-
-static const char * const sma1303_aif_in_source_text[] = {
- "Mono", "Left", "Right"};
-static const char * const sma1303_aif_out_source_text[] = {
- "Disable", "After_FmtC", "After_Mixer", "After_DSP", "After_Post",
- "Clk_PLL", "Clk_OSC"};
-
-static const struct soc_enum sma1303_aif_in_source_enum =
- SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_aif_in_source_text),
- sma1303_aif_in_source_text);
-static const struct soc_enum sma1303_aif_out_source_enum =
- SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_aif_out_source_text),
- sma1303_aif_out_source_text);
-
-static int sma1303_force_mute_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_component *component =
- snd_soc_kcontrol_component(kcontrol);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
-
- ucontrol->value.integer.value[0] = (int)sma1303->force_mute_status;
- dev_dbg(sma1303->dev, "%s : Force Mute %s\n", __func__,
- sma1303->force_mute_status ? "ON" : "OFF");
-
- return 0;
-}
-
-static int sma1303_force_mute_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_component *component =
- snd_soc_kcontrol_component(kcontrol);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- bool change = false, val = (bool)ucontrol->value.integer.value[0];
-
- if (sma1303->force_mute_status == val)
- change = false;
- else {
- change = true;
- sma1303->force_mute_status = val;
- }
- dev_dbg(sma1303->dev, "%s : Force Mute %s\n", __func__,
- sma1303->force_mute_status ? "ON" : "OFF");
-
- return change;
-}
-
-static int sma1303_postscaler_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_component *component =
- snd_soc_kcontrol_component(kcontrol);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int val, ret;
-
- ret = sma1303_regmap_read(sma1303, SMA1303_90_POSTSCALER, &val);
- if (ret < 0)
- return -EINVAL;
-
- ucontrol->value.integer.value[0] = (val & 0x7E) >> 1;
-
- return 0;
-}
-
-static int sma1303_postscaler_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_component *component =
- snd_soc_kcontrol_component(kcontrol);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret, val = (int)ucontrol->value.integer.value[0];
- bool change;
-
- ret = sma1303_regmap_update_bits(sma1303,
- SMA1303_90_POSTSCALER, 0x7E, (val << 1), &change);
- if (ret < 0)
- return -EINVAL;
-
- return change;
-}
-
-static int sma1303_startup(struct snd_soc_component *component)
-{
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- bool change = false, temp = false;
-
- sma1303_regmap_update_bits(sma1303, SMA1303_8E_PLL_CTRL,
- SMA1303_PLL_PD2_MASK, SMA1303_PLL_OPERATION2, &temp);
- if (temp == true)
- change = true;
-
- sma1303_regmap_update_bits(sma1303, SMA1303_00_SYSTEM_CTRL,
- SMA1303_POWER_MASK, SMA1303_POWER_ON, &temp);
- if (temp == true)
- change = true;
-
- if (sma1303->amp_mode == SMA1303_MONO) {
- sma1303_regmap_update_bits(sma1303,
- SMA1303_10_SYSTEM_CTRL1,
- SMA1303_SPK_MODE_MASK,
- SMA1303_SPK_MONO,
- &temp);
- if (temp == true)
- change = true;
-
- } else {
- sma1303_regmap_update_bits(sma1303,
- SMA1303_10_SYSTEM_CTRL1,
- SMA1303_SPK_MODE_MASK,
- SMA1303_SPK_STEREO,
- &temp);
- if (temp == true)
- change = true;
- }
-
- if (sma1303->check_fault_status) {
- if (sma1303->check_fault_period > 0)
- queue_delayed_work(system_freezable_wq,
- &sma1303->check_fault_work,
- sma1303->check_fault_period * HZ);
- else
- queue_delayed_work(system_freezable_wq,
- &sma1303->check_fault_work,
- CHECK_PERIOD_TIME * HZ);
- }
-
- sma1303->amp_power_status = true;
-
- return change;
-}
-
-static int sma1303_shutdown(struct snd_soc_component *component)
-{
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- bool change = false, temp = false;
-
- cancel_delayed_work_sync(&sma1303->check_fault_work);
-
- sma1303_regmap_update_bits(sma1303, SMA1303_10_SYSTEM_CTRL1,
- SMA1303_SPK_MODE_MASK, SMA1303_SPK_OFF, &temp);
- if (temp == true)
- change = true;
-
- sma1303_regmap_update_bits(sma1303, SMA1303_00_SYSTEM_CTRL,
- SMA1303_POWER_MASK, SMA1303_POWER_OFF, &temp);
- if (temp == true)
- change = true;
- sma1303_regmap_update_bits(sma1303, SMA1303_8E_PLL_CTRL,
- SMA1303_PLL_PD2_MASK, SMA1303_PLL_PD2, &temp);
- if (temp == true)
- change = true;
-
- sma1303->amp_power_status = false;
-
- return change;
-}
-
-static int sma1303_aif_in_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_component *component =
- snd_soc_dapm_to_component(w->dapm);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- unsigned int mux = dapm_kcontrol_get_value(w->kcontrols[0]);
- int ret = 0;
- bool change = false, temp = false;
-
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- switch (mux) {
- case 0:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_11_SYSTEM_CTRL2,
- SMA1303_MONOMIX_MASK,
- SMA1303_MONOMIX_ON,
- &change);
- sma1303->amp_mode = SMA1303_MONO;
- break;
- case 1:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_11_SYSTEM_CTRL2,
- SMA1303_MONOMIX_MASK,
- SMA1303_MONOMIX_OFF,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_11_SYSTEM_CTRL2,
- SMA1303_LR_DATA_SW_MASK,
- SMA1303_LR_DATA_SW_NORMAL,
- &temp);
- if (temp == true)
- change = true;
- sma1303->amp_mode = SMA1303_STEREO;
- break;
- case 2:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_11_SYSTEM_CTRL2,
- SMA1303_MONOMIX_MASK,
- SMA1303_MONOMIX_OFF,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_11_SYSTEM_CTRL2,
- SMA1303_LR_DATA_SW_MASK,
- SMA1303_LR_DATA_SW_NORMAL,
- &temp);
- if (temp == true)
- change = true;
- sma1303->amp_mode = SMA1303_STEREO;
- break;
- default:
- dev_err(sma1303->dev, "%s : Invalid value (%d)\n",
- __func__, mux);
- return -EINVAL;
- }
-
- dev_dbg(sma1303->dev, "%s : Source : %s\n", __func__,
- sma1303_aif_in_source_text[mux]);
- break;
- }
- if (ret < 0)
- return -EINVAL;
- return change;
-}
-
-static int sma1303_aif_out_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_component *component =
- snd_soc_dapm_to_component(w->dapm);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- unsigned int mux = dapm_kcontrol_get_value(w->kcontrols[0]);
- int ret = 0;
- bool change = false, temp = false;
-
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- switch (mux) {
- case 0:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_NORMAL_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_OUT_SEL_MASK,
- SMA1303_OUT_SEL_DISABLE,
- &temp);
- if (temp == true)
- change = true;
- break;
- case 1:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_NORMAL_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_OUT_SEL_MASK,
- SMA1303_FORMAT_CONVERTER,
- &temp);
- if (temp == true)
- change = true;
- break;
- case 2:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_NORMAL_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_OUT_SEL_MASK,
- SMA1303_MIXER_OUTPUT,
- &temp);
- if (temp == true)
- change = true;
- break;
- case 3:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_NORMAL_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_OUT_SEL_MASK,
- SMA1303_SPEAKER_PATH,
- &temp);
- if (temp == true)
- change = true;
- break;
- case 4:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_NORMAL_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_OUT_SEL_MASK,
- SMA1303_POSTSCALER_OUTPUT,
- &temp);
- if (temp == true)
- change = true;
- break;
- case 5:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_CLK_OUT_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_MON_OSC_PLL_MASK,
- SMA1303_PLL_SDO,
- &temp);
- if (temp == true)
- change = true;
- break;
- case 6:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_TEST_CLKO_EN_MASK,
- SMA1303_CLK_OUT_SDO,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_MON_OSC_PLL_MASK,
- SMA1303_OSC_SDO,
- &temp);
- if (temp == true)
- change = true;
- break;
- default:
- dev_err(sma1303->dev, "%s : Invalid value (%d)\n",
- __func__, mux);
- return -EINVAL;
- }
-
- dev_dbg(sma1303->dev, "%s : Source : %s\n", __func__,
- sma1303_aif_out_source_text[mux]);
- break;
- }
- if (ret < 0)
- return -EINVAL;
- return change;
-}
-
-static int sma1303_sdo_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_component *component =
- snd_soc_dapm_to_component(w->dapm);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret = 0;
- bool change = false, temp = false;
-
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- dev_dbg(sma1303->dev,
- "%s : SND_SOC_DAPM_PRE_PMU\n", __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_CONFIG_MASK,
- SMA1303_OUTPUT_PORT_ENABLE,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_SDO_OUTPUT_MASK,
- SMA1303_NORMAL_OUT,
- &temp);
- if (temp == true)
- change = true;
- break;
- case SND_SOC_DAPM_POST_PMD:
- dev_dbg(sma1303->dev,
- "%s : SND_SOC_DAPM_POST_PMD\n", __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_09_OUTPUT_CTRL,
- SMA1303_PORT_CONFIG_MASK,
- SMA1303_INPUT_PORT_ONLY,
- &temp);
- if (temp == true)
- change = true;
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A3_TOP_MAN2,
- SMA1303_SDO_OUTPUT_MASK,
- SMA1303_HIGH_Z_OUT,
- &temp);
- if (temp == true)
- change = true;
- break;
- }
- if (ret < 0)
- return -EINVAL;
- return change;
-}
-
-static int sma1303_post_scaler_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_component *component =
- snd_soc_dapm_to_component(w->dapm);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret = 0;
- bool change = false;
-
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- dev_dbg(sma1303->dev,
- "%s : SND_SOC_DAPM_PRE_PMU\n", __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_90_POSTSCALER,
- SMA1303_BYP_POST_MASK,
- SMA1303_EN_POST_SCALER,
- &change);
- break;
- case SND_SOC_DAPM_POST_PMD:
- dev_dbg(sma1303->dev,
- "%s : SND_SOC_DAPM_POST_PMD\n", __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_90_POSTSCALER,
- SMA1303_BYP_POST_MASK,
- SMA1303_BYP_POST_SCALER,
- &change);
- break;
- }
- if (ret < 0)
- return -EINVAL;
- return change;
-}
-
-static int sma1303_power_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_component *component =
- snd_soc_dapm_to_component(w->dapm);
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret = 0;
-
- switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- dev_dbg(sma1303->dev,
- "%s : SND_SOC_DAPM_POST_PMU\n", __func__);
- ret = sma1303_startup(component);
- break;
- case SND_SOC_DAPM_PRE_PMD:
- dev_dbg(sma1303->dev,
- "%s : SND_SOC_DAPM_PRE_PMD\n", __func__);
- ret = sma1303_shutdown(component);
- break;
- }
- return ret;
-}
-
-static const struct snd_kcontrol_new sma1303_aif_in_source_control =
- SOC_DAPM_ENUM("AIF IN Source", sma1303_aif_in_source_enum);
-static const struct snd_kcontrol_new sma1303_aif_out_source_control =
- SOC_DAPM_ENUM("AIF OUT Source", sma1303_aif_out_source_enum);
-static const struct snd_kcontrol_new sma1303_sdo_control =
- SOC_DAPM_SINGLE_VIRT("Switch", 1);
-static const struct snd_kcontrol_new sma1303_post_scaler_control =
- SOC_DAPM_SINGLE_VIRT("Switch", 1);
-static const struct snd_kcontrol_new sma1303_enable_control =
- SOC_DAPM_SINGLE_VIRT("Switch", 1);
-
-static const struct snd_kcontrol_new sma1303_snd_controls[] = {
- SOC_SINGLE_TLV("Speaker Volume", SMA1303_0A_SPK_VOL,
- 0, 167, 1, sma1303_spk_tlv),
- SOC_SINGLE_BOOL_EXT("Force Mute Switch", 0,
- sma1303_force_mute_get, sma1303_force_mute_put),
- SOC_SINGLE_EXT("Postscaler Gain", SMA1303_90_POSTSCALER, 1, 0x30, 0,
- sma1303_postscaler_get, sma1303_postscaler_put),
-};
-
-static const struct snd_soc_dapm_widget sma1303_dapm_widgets[] = {
- /* platform domain */
- SND_SOC_DAPM_OUTPUT("SPK"),
- SND_SOC_DAPM_INPUT("SDO"),
-
- /* path domain */
- SND_SOC_DAPM_MUX_E("AIF IN Source", SND_SOC_NOPM, 0, 0,
- &sma1303_aif_in_source_control,
- sma1303_aif_in_event,
- SND_SOC_DAPM_PRE_PMU),
- SND_SOC_DAPM_MUX_E("AIF OUT Source", SND_SOC_NOPM, 0, 0,
- &sma1303_aif_out_source_control,
- sma1303_aif_out_event,
- SND_SOC_DAPM_PRE_PMU),
- SND_SOC_DAPM_SWITCH_E("SDO Enable", SND_SOC_NOPM, 0, 0,
- &sma1303_sdo_control,
- sma1303_sdo_event,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_MIXER("Entry", SND_SOC_NOPM, 0, 0, NULL, 0),
- SND_SOC_DAPM_SWITCH_E("Post Scaler", SND_SOC_NOPM, 0, 1,
- &sma1303_post_scaler_control,
- sma1303_post_scaler_event,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_OUT_DRV_E("AMP Power", SND_SOC_NOPM, 0, 0, NULL, 0,
- sma1303_power_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_SWITCH("AMP Enable", SND_SOC_NOPM, 0, 1,
- &sma1303_enable_control),
-
- /* stream domain */
- SND_SOC_DAPM_AIF_IN("AIF IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
- SND_SOC_DAPM_AIF_OUT("AIF OUT", "Capture", 0, SND_SOC_NOPM, 0, 0),
-};
-
-static const struct snd_soc_dapm_route sma1303_audio_map[] = {
- /* Playback */
- {"AIF IN Source", "Mono", "AIF IN"},
- {"AIF IN Source", "Left", "AIF IN"},
- {"AIF IN Source", "Right", "AIF IN"},
-
- {"SDO Enable", "Switch", "AIF IN"},
- {"AIF OUT Source", "Disable", "SDO Enable"},
- {"AIF OUT Source", "After_FmtC", "SDO Enable"},
- {"AIF OUT Source", "After_Mixer", "SDO Enable"},
- {"AIF OUT Source", "After_DSP", "SDO Enable"},
- {"AIF OUT Source", "After_Post", "SDO Enable"},
- {"AIF OUT Source", "Clk_PLL", "SDO Enable"},
- {"AIF OUT Source", "Clk_OSC", "SDO Enable"},
-
- {"Entry", NULL, "AIF OUT Source"},
- {"Entry", NULL, "AIF IN Source"},
-
- {"Post Scaler", "Switch", "Entry"},
- {"AMP Power", NULL, "Entry"},
- {"AMP Power", NULL, "Entry"},
-
- {"AMP Enable", "Switch", "AMP Power"},
- {"SPK", NULL, "AMP Enable"},
-
- /* Capture */
- {"AIF OUT", NULL, "AMP Enable"},
-};
-
-static int sma1303_setup_pll(struct snd_soc_component *component,
- unsigned int bclk)
-{
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
-
- int i = 0, ret = 0;
-
- dev_dbg(component->dev, "%s : BCLK = %dHz\n",
- __func__, bclk);
-
- if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK) {
- dev_dbg(component->dev, "%s : MCLK is not supported\n",
- __func__);
- } else if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) {
- for (i = 0; i < sma1303->num_of_pll_matches; i++) {
- if (sma1303->pll_matches[i].input_clk == bclk)
- break;
- }
- if (i == sma1303->num_of_pll_matches) {
- dev_dbg(component->dev, "%s : No matching value between pll table and SCK\n",
- __func__);
- return -EINVAL;
- }
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A2_TOP_MAN1,
- SMA1303_PLL_PD_MASK|SMA1303_PLL_REF_CLK_MASK,
- SMA1303_PLL_OPERATION|SMA1303_PLL_SCK,
- NULL);
- }
-
- ret += sma1303_regmap_write(sma1303,
- SMA1303_8B_PLL_POST_N,
- sma1303->pll_matches[i].post_n);
-
- ret += sma1303_regmap_write(sma1303,
- SMA1303_8C_PLL_N,
- sma1303->pll_matches[i].n);
-
- ret += sma1303_regmap_write(sma1303,
- SMA1303_8D_PLL_A_SETTING,
- sma1303->pll_matches[i].vco);
-
- ret += sma1303_regmap_write(sma1303,
- SMA1303_8F_PLL_P_CP,
- sma1303->pll_matches[i].p_cp);
- if (ret < 0)
- return -EINVAL;
-
- return 0;
-}
-
-static int sma1303_dai_hw_params_amp(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-{
- struct snd_soc_component *component = dai->component;
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- unsigned int bclk = 0;
- int ret = 0;
-
- if (sma1303->format == SND_SOC_DAIFMT_DSP_A)
- bclk = params_rate(params) * sma1303->frame_size;
- else
- bclk = params_rate(params) * params_physical_width(params)
- * params_channels(params);
-
- dev_dbg(component->dev,
- "%s : rate = %d : bit size = %d : channel = %d\n",
- __func__, params_rate(params), params_width(params),
- params_channels(params));
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-
- if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK
- || sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) {
-
- if (sma1303->last_bclk != bclk) {
- sma1303_setup_pll(component, bclk);
- sma1303->last_bclk = bclk;
- }
- }
-
- switch (params_rate(params)) {
- case 8000:
- case 12000:
- case 16000:
- case 24000:
- case 32000:
- case 44100:
- case 48000:
- case 96000:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A2_TOP_MAN1,
- SMA1303_DAC_DN_CONV_MASK,
- SMA1303_DAC_DN_CONV_DISABLE,
- NULL);
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_LEFTPOL_MASK,
- SMA1303_LOW_FIRST_CH,
- NULL);
- break;
-
- case 192000:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A2_TOP_MAN1,
- SMA1303_DAC_DN_CONV_MASK,
- SMA1303_DAC_DN_CONV_ENABLE,
- NULL);
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_LEFTPOL_MASK,
- SMA1303_HIGH_FIRST_CH,
- NULL);
- break;
-
- default:
- dev_err(component->dev, "%s not support rate : %d\n",
- __func__, params_rate(params));
-
- return -EINVAL;
- }
-
- } else {
-
- switch (params_format(params)) {
-
- case SNDRV_PCM_FORMAT_S16_LE:
- dev_dbg(component->dev,
- "%s set format SNDRV_PCM_FORMAT_S16_LE\n",
- __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_SCK_RATE_MASK,
- SMA1303_SCK_32FS,
- NULL);
- break;
-
- case SNDRV_PCM_FORMAT_S24_LE:
- dev_dbg(component->dev,
- "%s set format SNDRV_PCM_FORMAT_S24_LE\n",
- __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_SCK_RATE_MASK,
- SMA1303_SCK_64FS,
- NULL);
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- dev_dbg(component->dev,
- "%s set format SNDRV_PCM_FORMAT_S32_LE\n",
- __func__);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_SCK_RATE_MASK,
- SMA1303_SCK_64FS,
- NULL);
- break;
- default:
- dev_err(component->dev,
- "%s not support data bit : %d\n", __func__,
- params_format(params));
- return -EINVAL;
- }
- }
-
- switch (sma1303->format) {
- case SND_SOC_DAIFMT_I2S:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_I2S_MODE_MASK,
- SMA1303_STANDARD_I2S,
- NULL);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_O_FORMAT_MASK,
- SMA1303_O_FMT_I2S,
- NULL);
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_I2S_MODE_MASK,
- SMA1303_LJ,
- NULL);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_O_FORMAT_MASK,
- SMA1303_O_FMT_LJ,
- NULL);
- break;
- case SND_SOC_DAIFMT_RIGHT_J:
- switch (params_width(params)) {
- case 16:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_I2S_MODE_MASK,
- SMA1303_RJ_16BIT,
- NULL);
- break;
- case 24:
- case 32:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_I2S_MODE_MASK,
- SMA1303_RJ_24BIT,
- NULL);
- break;
- }
- break;
- case SND_SOC_DAIFMT_DSP_A:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_I2S_MODE_MASK,
- SMA1303_STANDARD_I2S,
- NULL);
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_O_FORMAT_MASK,
- SMA1303_O_FMT_TDM,
- NULL);
- break;
- }
-
- switch (params_width(params)) {
- case 16:
- case 24:
- case 32:
- break;
- default:
- dev_err(component->dev,
- "%s not support data bit : %d\n", __func__,
- params_format(params));
- return -EINVAL;
- }
- if (ret < 0)
- return -EINVAL;
-
- return 0;
-}
-
-static int sma1303_dai_set_sysclk_amp(struct snd_soc_dai *dai,
- int clk_id, unsigned int freq, int dir)
-{
- struct snd_soc_component *component = dai->component;
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
-
- switch (clk_id) {
- case SMA1303_EXTERNAL_CLOCK_19_2:
- break;
- case SMA1303_EXTERNAL_CLOCK_24_576:
- break;
- case SMA1303_PLL_CLKIN_MCLK:
- break;
- case SMA1303_PLL_CLKIN_BCLK:
- break;
- default:
- dev_err(component->dev, "Invalid clk id: %d\n", clk_id);
- return -EINVAL;
- }
- sma1303->sys_clk_id = clk_id;
- return 0;
-}
-
-static int sma1303_dai_mute(struct snd_soc_dai *dai, int mute, int stream)
-{
- struct snd_soc_component *component = dai->component;
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret = 0;
-
- if (stream == SNDRV_PCM_STREAM_CAPTURE)
- return ret;
-
- if (mute) {
- dev_dbg(component->dev, "%s : %s\n", __func__, "MUTE");
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_0E_MUTE_VOL_CTRL,
- SMA1303_SPK_MUTE_MASK,
- SMA1303_SPK_MUTE,
- NULL);
-
- /* Need to wait time for mute slope */
- msleep(55);
- } else {
- if (!sma1303->force_mute_status) {
- dev_dbg(component->dev, "%s : %s\n",
- __func__, "UNMUTE");
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_0E_MUTE_VOL_CTRL,
- SMA1303_SPK_MUTE_MASK,
- SMA1303_SPK_UNMUTE,
- NULL);
- } else {
- dev_dbg(sma1303->dev,
- "%s : FORCE MUTE!!!\n", __func__);
- }
- }
-
- if (ret < 0)
- return -EINVAL;
- return 0;
-}
-
-static int sma1303_dai_set_fmt_amp(struct snd_soc_dai *dai,
- unsigned int fmt)
-{
- struct snd_soc_component *component = dai->component;
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret = 0;
-
- switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-
- case SND_SOC_DAIFMT_CBC_CFC:
- dev_dbg(component->dev,
- "%s : %s\n", __func__, "I2S/TDM Device mode");
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_CONTROLLER_DEVICE_MASK,
- SMA1303_DEVICE_MODE,
- NULL);
- break;
-
- case SND_SOC_DAIFMT_CBP_CFP:
- dev_dbg(component->dev,
- "%s : %s\n", __func__, "I2S/TDM Controller mode");
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_CONTROLLER_DEVICE_MASK,
- SMA1303_CONTROLLER_MODE,
- NULL);
- break;
-
- default:
- dev_err(component->dev,
- "Unsupported Controller/Device : 0x%x\n", fmt);
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-
- case SND_SOC_DAIFMT_I2S:
- case SND_SOC_DAIFMT_RIGHT_J:
- case SND_SOC_DAIFMT_LEFT_J:
- case SND_SOC_DAIFMT_DSP_A:
- case SND_SOC_DAIFMT_DSP_B:
- sma1303->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
- break;
- default:
- dev_err(component->dev,
- "Unsupported Audio Interface Format : 0x%x\n", fmt);
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-
- case SND_SOC_DAIFMT_IB_NF:
- dev_dbg(component->dev, "%s : %s\n",
- __func__, "Invert BCLK + Normal Frame");
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_SCK_RISING_MASK,
- SMA1303_SCK_RISING_EDGE,
- NULL);
- break;
- case SND_SOC_DAIFMT_IB_IF:
- dev_dbg(component->dev, "%s : %s\n",
- __func__, "Invert BCLK + Invert Frame");
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_LEFTPOL_MASK|SMA1303_SCK_RISING_MASK,
- SMA1303_HIGH_FIRST_CH|SMA1303_SCK_RISING_EDGE,
- NULL);
- break;
- case SND_SOC_DAIFMT_NB_IF:
- dev_dbg(component->dev, "%s : %s\n",
- __func__, "Normal BCLK + Invert Frame");
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_01_INPUT1_CTRL1,
- SMA1303_LEFTPOL_MASK,
- SMA1303_HIGH_FIRST_CH,
- NULL);
- break;
- case SND_SOC_DAIFMT_NB_NF:
- dev_dbg(component->dev, "%s : %s\n",
- __func__, "Normal BCLK + Normal Frame");
- break;
- default:
- dev_err(component->dev,
- "Unsupported Bit & Frameclock : 0x%x\n", fmt);
- return -EINVAL;
- }
-
- if (ret < 0)
- return -EINVAL;
- return 0;
-}
-
-static int sma1303_dai_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int tx_mask, unsigned int rx_mask,
- int slots, int slot_width)
-{
- struct snd_soc_component *component = dai->component;
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
- int ret = 0;
-
- dev_dbg(component->dev, "%s : slots = %d, slot_width - %d\n",
- __func__, slots, slot_width);
-
- sma1303->frame_size = slot_width * slots;
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A4_TOP_MAN3,
- SMA1303_O_FORMAT_MASK,
- SMA1303_O_FMT_TDM,
- NULL);
-
- switch (slot_width) {
- case 16:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A6_TDM2,
- SMA1303_TDM_DL_MASK,
- SMA1303_TDM_DL_16,
- NULL);
- break;
- case 32:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A6_TDM2,
- SMA1303_TDM_DL_MASK,
- SMA1303_TDM_DL_32,
- NULL);
- break;
- default:
- dev_err(component->dev, "%s not support TDM %d slot_width\n",
- __func__, slot_width);
- break;
- }
-
- switch (slots) {
- case 4:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A6_TDM2,
- SMA1303_TDM_N_SLOT_MASK,
- SMA1303_TDM_N_SLOT_4,
- NULL);
- break;
- case 8:
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A6_TDM2,
- SMA1303_TDM_N_SLOT_MASK,
- SMA1303_TDM_N_SLOT_8,
- NULL);
- break;
- default:
- dev_err(component->dev, "%s not support TDM %d slots\n",
- __func__, slots);
- break;
- }
-
- if (sma1303->tdm_slot_rx < slots)
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A5_TDM1,
- SMA1303_TDM_SLOT1_RX_POS_MASK,
- (sma1303->tdm_slot_rx) << 3,
- NULL);
- else
- dev_err(component->dev, "%s Incorrect tdm-slot-rx %d set\n",
- __func__, sma1303->tdm_slot_rx);
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A5_TDM1,
- SMA1303_TDM_CLK_POL_MASK,
- SMA1303_TDM_CLK_POL_RISE,
- NULL);
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A5_TDM1,
- SMA1303_TDM_TX_MODE_MASK,
- SMA1303_TDM_TX_MONO,
- NULL);
-
- if (sma1303->tdm_slot_tx < slots)
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_A6_TDM2,
- SMA1303_TDM_SLOT1_TX_POS_MASK,
- (sma1303->tdm_slot_tx) << 3,
- NULL);
- else
- dev_err(component->dev, "%s Incorrect tdm-slot-tx %d set\n",
- __func__, sma1303->tdm_slot_tx);
-
- if (ret < 0)
- return -EINVAL;
- return 0;
-}
-
-static const struct snd_soc_dai_ops sma1303_dai_ops_amp = {
- .set_sysclk = sma1303_dai_set_sysclk_amp,
- .set_fmt = sma1303_dai_set_fmt_amp,
- .hw_params = sma1303_dai_hw_params_amp,
- .mute_stream = sma1303_dai_mute,
- .set_tdm_slot = sma1303_dai_set_tdm_slot,
-};
-
-#define SMA1303_RATES SNDRV_PCM_RATE_8000_192000
-#define SMA1303_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \
- SNDRV_PCM_FMTBIT_S32_LE)
-
-static struct snd_soc_dai_driver sma1303_dai[] = {
- {
- .name = "sma1303-amplifier",
- .id = 0,
- .playback = {
- .stream_name = "Playback",
- .channels_min = 1,
- .channels_max = 2,
- .rates = SMA1303_RATES,
- .formats = SMA1303_FORMATS,
- },
- .capture = {
- .stream_name = "Capture",
- .channels_min = 1,
- .channels_max = 2,
- .rates = SMA1303_RATES,
- .formats = SMA1303_FORMATS,
- },
- .ops = &sma1303_dai_ops_amp,
- },
-};
-
-static void sma1303_check_fault_worker(struct work_struct *work)
-{
- struct sma1303_priv *sma1303 =
- container_of(work, struct sma1303_priv, check_fault_work.work);
- int ret = 0;
- unsigned int over_temp, ocp_val, uvlo_val;
-
- if (sma1303->tsdw_cnt)
- ret = sma1303_regmap_read(sma1303,
- SMA1303_0A_SPK_VOL, &sma1303->cur_vol);
- else
- ret = sma1303_regmap_read(sma1303,
- SMA1303_0A_SPK_VOL, &sma1303->init_vol);
-
- if (ret != 0) {
- dev_err(sma1303->dev,
- "failed to read SMA1303_0A_SPK_VOL : %d\n", ret);
- return;
- }
-
- ret = sma1303_regmap_read(sma1303, SMA1303_FA_STATUS1, &over_temp);
- if (ret != 0) {
- dev_err(sma1303->dev,
- "failed to read SMA1303_FA_STATUS1 : %d\n", ret);
- return;
- }
-
- ret = sma1303_regmap_read(sma1303, SMA1303_FB_STATUS2, &ocp_val);
- if (ret != 0) {
- dev_err(sma1303->dev,
- "failed to read SMA1303_FB_STATUS2 : %d\n", ret);
- return;
- }
-
- ret = sma1303_regmap_read(sma1303, SMA1303_FF_DEVICE_INDEX, &uvlo_val);
- if (ret != 0) {
- dev_err(sma1303->dev,
- "failed to read SMA1303_FF_DEVICE_INDEX : %d\n", ret);
- return;
- }
-
- if (~over_temp & SMA1303_OT1_OK_STATUS) {
- dev_crit(sma1303->dev,
- "%s : OT1(Over Temperature Level 1)\n", __func__);
-
- if ((sma1303->cur_vol + 6) <= 0xFF)
- sma1303_regmap_write(sma1303,
- SMA1303_0A_SPK_VOL, sma1303->cur_vol + 6);
-
- sma1303->tsdw_cnt++;
- } else if (sma1303->tsdw_cnt) {
- sma1303_regmap_write(sma1303,
- SMA1303_0A_SPK_VOL, sma1303->init_vol);
- sma1303->tsdw_cnt = 0;
- sma1303->cur_vol = sma1303->init_vol;
- }
-
- if (~over_temp & SMA1303_OT2_OK_STATUS) {
- dev_crit(sma1303->dev,
- "%s : OT2(Over Temperature Level 2)\n", __func__);
- }
- if (ocp_val & SMA1303_OCP_SPK_STATUS) {
- dev_crit(sma1303->dev,
- "%s : OCP_SPK(Over Current Protect SPK)\n", __func__);
- }
- if (ocp_val & SMA1303_OCP_BST_STATUS) {
- dev_crit(sma1303->dev,
- "%s : OCP_BST(Over Current Protect Boost)\n", __func__);
- }
- if ((ocp_val & SMA1303_CLK_MON_STATUS) && (sma1303->amp_power_status)) {
- dev_crit(sma1303->dev,
- "%s : CLK_FAULT(No clock input)\n", __func__);
- }
- if (uvlo_val & SMA1303_UVLO_BST_STATUS) {
- dev_crit(sma1303->dev,
- "%s : UVLO(Under Voltage Lock Out)\n", __func__);
- }
-
- if ((over_temp != sma1303->last_over_temp) ||
- (ocp_val != sma1303->last_ocp_val)) {
-
- dev_crit(sma1303->dev, "Please check AMP status");
- dev_dbg(sma1303->dev, "STATUS1=0x%02X : STATUS2=0x%02X\n",
- over_temp, ocp_val);
- sma1303->last_over_temp = over_temp;
- sma1303->last_ocp_val = ocp_val;
- }
-
- if (sma1303->check_fault_status) {
- if (sma1303->check_fault_period > 0)
- queue_delayed_work(system_freezable_wq,
- &sma1303->check_fault_work,
- sma1303->check_fault_period * HZ);
- else
- queue_delayed_work(system_freezable_wq,
- &sma1303->check_fault_work,
- CHECK_PERIOD_TIME * HZ);
- }
-
- if (!(~over_temp & SMA1303_OT1_OK_STATUS)
- && !(~over_temp & SMA1303_OT2_OK_STATUS)
- && !(ocp_val & SMA1303_OCP_SPK_STATUS)
- && !(ocp_val & SMA1303_OCP_BST_STATUS)
- && !(ocp_val & SMA1303_CLK_MON_STATUS)
- && !(uvlo_val & SMA1303_UVLO_BST_STATUS)) {
- }
-}
-
-static int sma1303_probe(struct snd_soc_component *component)
-{
- struct snd_soc_dapm_context *dapm =
- snd_soc_component_get_dapm(component);
-
- snd_soc_dapm_sync(dapm);
-
- return 0;
-}
-
-static void sma1303_remove(struct snd_soc_component *component)
-{
- struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
-
- cancel_delayed_work_sync(&sma1303->check_fault_work);
-}
-
-static const struct snd_soc_component_driver sma1303_component = {
- .probe = sma1303_probe,
- .remove = sma1303_remove,
- .controls = sma1303_snd_controls,
- .num_controls = ARRAY_SIZE(sma1303_snd_controls),
- .dapm_widgets = sma1303_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(sma1303_dapm_widgets),
- .dapm_routes = sma1303_audio_map,
- .num_dapm_routes = ARRAY_SIZE(sma1303_audio_map),
-};
-
-const struct regmap_config sma_i2c_regmap = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = SMA1303_FF_DEVICE_INDEX,
- .readable_reg = sma1303_readable_register,
- .writeable_reg = sma1303_writeable_register,
- .volatile_reg = sma1303_volatile_register,
-
- .cache_type = REGCACHE_NONE,
- .reg_defaults = sma1303_reg_def,
- .num_reg_defaults = ARRAY_SIZE(sma1303_reg_def),
-};
-
-static ssize_t check_fault_period_show(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
-
- return sysfs_emit(buf, "%ld\n", sma1303->check_fault_period);
-}
-
-static ssize_t check_fault_period_store(struct device *dev,
- struct device_attribute *devattr, const char *buf, size_t count)
-{
- struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
- int ret;
-
- ret = kstrtol(buf, 10, &sma1303->check_fault_period);
-
- if (ret)
- return -EINVAL;
-
- return (ssize_t)count;
-}
-
-static DEVICE_ATTR_RW(check_fault_period);
-
-static ssize_t check_fault_status_show(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
-
- return sysfs_emit(buf, "%ld\n", sma1303->check_fault_status);
-}
-
-static ssize_t check_fault_status_store(struct device *dev,
- struct device_attribute *devattr, const char *buf, size_t count)
-{
- struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
- int ret;
-
- ret = kstrtol(buf, 10, &sma1303->check_fault_status);
-
- if (ret)
- return -EINVAL;
-
- if (sma1303->check_fault_status) {
- if (sma1303->check_fault_period > 0)
- queue_delayed_work(system_freezable_wq,
- &sma1303->check_fault_work,
- sma1303->check_fault_period * HZ);
- else
- queue_delayed_work(system_freezable_wq,
- &sma1303->check_fault_work,
- CHECK_PERIOD_TIME * HZ);
- }
-
- return (ssize_t)count;
-}
-
-static DEVICE_ATTR_RW(check_fault_status);
-
-static struct attribute *sma1303_attr[] = {
- &dev_attr_check_fault_period.attr,
- &dev_attr_check_fault_status.attr,
- NULL,
-};
-
-static struct attribute_group sma1303_attr_group = {
- .attrs = sma1303_attr,
-};
-
-static int sma1303_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct sma1303_priv *sma1303;
- struct device_node *np = client->dev.of_node;
- int ret, i = 0;
- u32 value = 0;
- unsigned int device_info, status, otp_stat;
-
- sma1303 = devm_kzalloc(&client->dev,
- sizeof(struct sma1303_priv), GFP_KERNEL);
- if (!sma1303)
- return -ENOMEM;
- sma1303->dev = &client->dev;
-
- sma1303->regmap = devm_regmap_init_i2c(client, &sma_i2c_regmap);
- if (IS_ERR(sma1303->regmap)) {
- ret = PTR_ERR(sma1303->regmap);
- dev_err(&client->dev,
- "Failed to allocate register map: %d\n", ret);
-
- return ret;
- }
-
- if (np) {
- if (!of_property_read_u32(np, "i2c-retry", &value)) {
- if (value > 50 || value <= 0) {
- sma1303->retry_cnt = SMA1303_I2C_RETRY_COUNT;
- dev_dbg(&client->dev, "%s : %s\n", __func__,
- "i2c-retry out of range (up to 50)");
- } else {
- sma1303->retry_cnt = value;
- dev_dbg(&client->dev, "%s : %s = %u\n",
- __func__, "i2c-retry count", value);
- }
- } else {
- dev_dbg(&client->dev, "%s : %s = %d\n", __func__,
- "i2c-retry count", SMA1303_I2C_RETRY_COUNT);
- sma1303->retry_cnt = SMA1303_I2C_RETRY_COUNT;
- }
- if (!of_property_read_u32(np, "tdm-slot-rx", &value)) {
- dev_dbg(&client->dev,
- "tdm slot rx is '%d' from DT\n", value);
- sma1303->tdm_slot_rx = value;
- } else {
- dev_dbg(&client->dev,
- "Default setting of tdm slot rx is '0'\n");
- sma1303->tdm_slot_rx = 0;
- }
- if (!of_property_read_u32(np, "tdm-slot-tx", &value)) {
- dev_dbg(&client->dev,
- "tdm slot tx is '%u' from DT\n", value);
- sma1303->tdm_slot_tx = value;
- } else {
- dev_dbg(&client->dev,
- "Default setting of tdm slot tx is '0'\n");
- sma1303->tdm_slot_tx = 0;
- }
- if (!of_property_read_u32(np, "sys-clk-id", &value)) {
- switch (value) {
- case SMA1303_EXTERNAL_CLOCK_19_2:
- case SMA1303_EXTERNAL_CLOCK_24_576:
- case SMA1303_PLL_CLKIN_MCLK:
- dev_dbg(&client->dev, "MCLK is not supported\n");
- break;
- case SMA1303_PLL_CLKIN_BCLK:
- dev_dbg(&client->dev,
- "Take an BCLK(SCK) and covert it to an internal PLL for use\n");
- break;
- default:
- dev_err(&client->dev,
- "Invalid sys-clk-id: %u\n", value);
- return -EINVAL;
- }
- sma1303->sys_clk_id = value;
- } else {
- dev_dbg(&client->dev, "Use the internal PLL clock by default\n");
- sma1303->sys_clk_id = SMA1303_PLL_CLKIN_BCLK;
- }
- } else {
- dev_err(&client->dev,
- "device node initialization error\n");
- devm_kfree(&client->dev, sma1303);
- return -ENODEV;
- }
-
- ret = sma1303_regmap_read(sma1303,
- SMA1303_FF_DEVICE_INDEX, &device_info);
-
- if ((ret != 0) || ((device_info & 0xF8) != SMA1303_DEVICE_ID)) {
- dev_err(&client->dev, "device initialization error (%d 0x%02X)",
- ret, device_info);
- }
- dev_dbg(&client->dev, "chip version 0x%02X\n", device_info);
-
- ret += sma1303_regmap_update_bits(sma1303,
- SMA1303_00_SYSTEM_CTRL,
- SMA1303_RESETBYI2C_MASK, SMA1303_RESETBYI2C_RESET,
- NULL);
-
- ret += sma1303_regmap_read(sma1303, SMA1303_FF_DEVICE_INDEX, &status);
- sma1303->rev_num = status & SMA1303_REV_NUM_STATUS;
- if (sma1303->rev_num == SMA1303_REV_NUM_TV0)
- dev_dbg(&client->dev, "SMA1303 Trimming Version 0\n");
- else if (sma1303->rev_num == SMA1303_REV_NUM_TV1)
- dev_dbg(&client->dev, "SMA1303 Trimming Version 1\n");
-
- ret += sma1303_regmap_read(sma1303, SMA1303_FB_STATUS2, &otp_stat);
- if (ret < 0)
- dev_err(&client->dev,
- "failed to read, register: %02X, ret: %d\n",
- SMA1303_FF_DEVICE_INDEX, ret);
-
- if (((sma1303->rev_num == SMA1303_REV_NUM_TV0) &&
- ((otp_stat & 0x0E) == SMA1303_OTP_STAT_OK_0)) ||
- ((sma1303->rev_num != SMA1303_REV_NUM_TV0) &&
- ((otp_stat & 0x0C) == SMA1303_OTP_STAT_OK_1)))
- dev_dbg(&client->dev, "SMA1303 OTP Status Successful\n");
- else
- dev_dbg(&client->dev, "SMA1303 OTP Status Fail\n");
-
- for (i = 0; i < (unsigned int)ARRAY_SIZE(sma1303_reg_def); i++)
- ret += sma1303_regmap_write(sma1303,
- sma1303_reg_def[i].reg,
- sma1303_reg_def[i].def);
-
- sma1303->amp_mode = SMA1303_MONO;
- sma1303->amp_power_status = false;
- sma1303->check_fault_period = CHECK_PERIOD_TIME;
- sma1303->check_fault_status = true;
- sma1303->force_mute_status = false;
- sma1303->init_vol = 0x31;
- sma1303->cur_vol = sma1303->init_vol;
- sma1303->last_bclk = 0;
- sma1303->last_ocp_val = 0x08;
- sma1303->last_over_temp = 0xC0;
- sma1303->tsdw_cnt = 0;
-
- sma1303->dev = &client->dev;
- sma1303->kobj = &client->dev.kobj;
-
- INIT_DELAYED_WORK(&sma1303->check_fault_work,
- sma1303_check_fault_worker);
-
- i2c_set_clientdata(client, sma1303);
-
- sma1303->pll_matches = sma1303_pll_matches;
- sma1303->num_of_pll_matches =
- ARRAY_SIZE(sma1303_pll_matches);
-
- ret = devm_snd_soc_register_component(&client->dev,
- &sma1303_component, sma1303_dai, 1);
- if (ret) {
- dev_err(&client->dev, "Failed to register component");
-
- return ret;
- }
-
- sma1303->attr_grp = &sma1303_attr_group;
- ret = sysfs_create_group(sma1303->kobj, sma1303->attr_grp);
- if (ret) {
- dev_err(&client->dev,
- "failed to create attribute group [%d]\n", ret);
- sma1303->attr_grp = NULL;
- }
-
- return ret;
-}
-
-static void sma1303_i2c_remove(struct i2c_client *client)
-{
- struct sma1303_priv *sma1303 =
- (struct sma1303_priv *) i2c_get_clientdata(client);
-
- cancel_delayed_work_sync(&sma1303->check_fault_work);
-}
-
-static const struct i2c_device_id sma1303_i2c_id[] = {
- {"sma1303", 0},
- {}
-};
-MODULE_DEVICE_TABLE(i2c, sma1303_i2c_id);
-
-static const struct of_device_id sma1303_of_match[] = {
- { .compatible = "irondevice,sma1303", },
- { }
-};
-MODULE_DEVICE_TABLE(of, sma1303_of_match);
-
-static struct i2c_driver sma1303_i2c_driver = {
- .driver = {
- .name = "sma1303",
- .of_match_table = sma1303_of_match,
- },
- .probe = sma1303_i2c_probe,
- .remove = sma1303_i2c_remove,
- .id_table = sma1303_i2c_id,
-};
-
-module_i2c_driver(sma1303_i2c_driver);
-
-MODULE_DESCRIPTION("ALSA SoC SMA1303 driver");
-MODULE_AUTHOR("Gyuhwa Park, <gyuhwa.park@irondevice.com>");
-MODULE_AUTHOR("Kiseok Jo, <kiseok.jo@irondevice.com>");
-MODULE_LICENSE("GPL v2");
deleted file mode 100644
@@ -1,609 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * sma1303.h -- sma1303 ALSA SoC Audio driver
- *
- * Copyright 2023 Iron Device Corporation
- *
- * Author: Kiseok Jo <kiseok.jo@irondevice.com>
- *
- */
-
-#ifndef _SMA1303_H
-#define _SMA1303_H
-
-#define SMA1303_I2C_ADDR_00 0x1e
-#define SMA1303_I2C_ADDR_01 0x3e
-#define SMA1303_I2C_ADDR_10 0x5e
-#define SMA1303_I2C_ADDR_11 0x7e
-
-#define SMA1303_EXTERNAL_CLOCK_19_2 0x00
-#define SMA1303_EXTERNAL_CLOCK_24_576 0x01
-#define SMA1303_PLL_CLKIN_MCLK 0x02
-#define SMA1303_PLL_CLKIN_BCLK 0x03
-
-#define SMA1303_MONO 0x00
-#define SMA1303_STEREO 0x01
-
-#define SMA1303_I2C_RETRY_COUNT 3
-
-/*
- * SMA1303 Register Definition
- */
-
-/* SMA1303 Register Addresses */
-#define SMA1303_00_SYSTEM_CTRL 0x00
-#define SMA1303_01_INPUT1_CTRL1 0x01
-#define SMA1303_02_INPUT1_CTRL2 0x02
-#define SMA1303_03_INPUT1_CTRL3 0x03
-#define SMA1303_04_INPUT1_CTRL4 0x04
-/* 0x05 ~ 0x08 : Reserved */
-#define SMA1303_09_OUTPUT_CTRL 0x09
-#define SMA1303_0A_SPK_VOL 0x0a
-#define SMA1303_0B_BST_TEST 0x0b
-#define SMA1303_0C_BST_TEST1 0x0c
-#define SMA1303_0D_SPK_TEST 0x0d
-#define SMA1303_0E_MUTE_VOL_CTRL 0x0e
-/* 0x0F : Reserved */
-#define SMA1303_10_SYSTEM_CTRL1 0x10
-#define SMA1303_11_SYSTEM_CTRL2 0x11
-#define SMA1303_12_SYSTEM_CTRL3 0x12
-/* 0x13 : Reserved */
-#define SMA1303_14_MODULATOR 0x14
-#define SMA1303_15_BASS_SPK1 0x15
-#define SMA1303_16_BASS_SPK2 0x16
-#define SMA1303_17_BASS_SPK3 0x17
-#define SMA1303_18_BASS_SPK4 0x18
-#define SMA1303_19_BASS_SPK5 0x19
-#define SMA1303_1A_BASS_SPK6 0x1a
-#define SMA1303_1B_BASS_SPK7 0x1b
-/* 0x1C ~ 0x22 : Reserved */
-#define SMA1303_23_COMP_LIM1 0x23
-#define SMA1303_24_COMP_LIM2 0x24
-#define SMA1303_25_COMP_LIM3 0x25
-#define SMA1303_26_COMP_LIM4 0x26
-/* 0x27 ~ 0x32 : Reserved */
-#define SMA1303_33_SDM_CTRL 0x33
-#define SMA1303_34_OTP_DATA1 0x34
-/* 0x35 : Reserved */
-#define SMA1303_36_PROTECTION 0x36
-#define SMA1303_37_SLOPE_CTRL 0x37
-#define SMA1303_38_OTP_TRM0 0x38
-/* 0x39 ~ 0x3A : Reserved */
-#define SMA1303_3B_TEST1 0x3b
-#define SMA1303_3C_TEST2 0x3c
-#define SMA1303_3D_TEST3 0x3d
-#define SMA1303_3E_ATEST1 0x3e
-#define SMA1303_3F_ATEST2 0x3f
-/* 0x40 ~ 0x8A : Reserved */
-#define SMA1303_8B_PLL_POST_N 0x8b
-#define SMA1303_8C_PLL_N 0x8c
-#define SMA1303_8D_PLL_A_SETTING 0x8d
-#define SMA1303_8E_PLL_CTRL 0x8e
-#define SMA1303_8F_PLL_P_CP 0x8f
-#define SMA1303_90_POSTSCALER 0x90
-#define SMA1303_91_CLASS_G_CTRL 0x91
-#define SMA1303_92_FDPEC_CTRL 0x92
-/* 0x93 : Reserved */
-#define SMA1303_94_BOOST_CTRL1 0x94
-#define SMA1303_95_BOOST_CTRL2 0x95
-#define SMA1303_96_BOOST_CTRL3 0x96
-#define SMA1303_97_BOOST_CTRL4 0x97
-/* 0x98 ~ 0x9F : Reserved */
-#define SMA1303_A0_PAD_CTRL0 0xa0
-#define SMA1303_A1_PAD_CTRL1 0xa1
-#define SMA1303_A2_TOP_MAN1 0xa2
-#define SMA1303_A3_TOP_MAN2 0xa3
-#define SMA1303_A4_TOP_MAN3 0xa4
-#define SMA1303_A5_TDM1 0xa5
-#define SMA1303_A6_TDM2 0xa6
-#define SMA1303_A7_CLK_MON 0xa7
-/* 0xA8 ~ 0xF9 : Reserved */
-#define SMA1303_FA_STATUS1 0xfa
-#define SMA1303_FB_STATUS2 0xfb
-/* 0xFC ~ 0xFE : Reserved */
-#define SMA1303_FF_DEVICE_INDEX 0xff
-
-/* SMA1303 Registers Bit Fields */
-
-/* SYSTEM_CTRL : 0x00 */
-#define SMA1303_RESETBYI2C_MASK (1<<1)
-#define SMA1303_RESETBYI2C_NORMAL (0<<1)
-#define SMA1303_RESETBYI2C_RESET (1<<1)
-
-#define SMA1303_POWER_MASK (1<<0)
-#define SMA1303_POWER_OFF (0<<0)
-#define SMA1303_POWER_ON (1<<0)
-
-/* INTPUT CTRL1 : 0x01 */
-#define SMA1303_CONTROLLER_DEVICE_MASK (1<<7)
-#define SMA1303_DEVICE_MODE (0<<7)
-#define SMA1303_CONTROLLER_MODE (1<<7)
-
-#define SMA1303_I2S_MODE_MASK (7<<4)
-#define SMA1303_STANDARD_I2S (0<<4)
-#define SMA1303_LJ (1<<4)
-#define SMA1303_RJ_16BIT (4<<4)
-#define SMA1303_RJ_18BIT (5<<4)
-#define SMA1303_RJ_20BIT (6<<4)
-#define SMA1303_RJ_24BIT (7<<4)
-
-#define SMA1303_LEFTPOL_MASK (1<<3)
-#define SMA1303_LOW_FIRST_CH (0<<3)
-#define SMA1303_HIGH_FIRST_CH (1<<3)
-
-#define SMA1303_SCK_RISING_MASK (1<<2)
-#define SMA1303_SCK_FALLING_EDGE (0<<2)
-#define SMA1303_SCK_RISING_EDGE (1<<2)
-
-/* INTPUT CTRL2 : 0x02 */
-#define SMA1303_IMODE_MASK (3<<6)
-#define SMA1303_I2S (0<<6)
-#define SMA1303_PCM_SHORT (1<<6)
-#define SMA1303_PCM_LONG (2<<6)
-
-#define RSMA1303_IGHT_FIRST_MASK (1<<5)
-#define SMA1303_LEFT_NORMAL (0<<5)
-#define SMA1303_RIGHT_INVERTED (1<<5)
-
-#define SMA1303_PCM_ALAW_MASK (1<<4)
-#define SMA1303_PCM_U_DECODING (0<<4)
-#define SMA1303_PCM_A_DECODING (1<<4)
-
-#define SMA1303_PCM_COMP_MASK (1<<3)
-#define SMA1303_PCM_LINEAR (0<<3)
-#define SMA1303_PCM_COMPANDING (1<<3)
-
-#define SMA1303_INPUTSEL_MASK (1<<2)
-#define SMA1303_PCM_8KHZ (0<<2)
-#define SMA1303_PCM_16KHZ (1<<2)
-
-#define SMA1303_PCM_STEREO_MASK (1<<1)
-#define SMA1303_PCM_MONO (0<<1)
-#define SMA1303_PCM_STEREO (1<<1)
-
-#define SMA1303_PCM_DL_MASK (1<<0)
-#define SMA1303_PCM_8BIT (0<<0)
-#define SMA1303_PCM_16BIT (1<<0)
-
-/* INTPUT CTRL3 : 0x03 */
-#define SMA1303_PCM_N_SLOT_MASK (15<<0)
-#define SMA1303_PCM_N_SLOT1 (0<<0)
-#define SMA1303_PCM_N_SLOT2 (1<<0)
-#define SMA1303_PCM_N_SLOT3 (2<<0)
-#define SMA1303_PCM_N_SLOT4 (3<<0)
-#define SMA1303_PCM_N_SLOT5 (4<<0)
-#define SMA1303_PCM_N_SLOT6 (5<<0)
-#define SMA1303_PCM_N_SLOT7 (6<<0)
-#define SMA1303_PCM_N_SLOT8 (7<<0)
-#define SMA1303_PCM_N_SLOT9 (8<<0)
-#define SMA1303_PCM_N_SLOT10 (9<<0)
-#define SMA1303_PCM_N_SLOT11 (10<<0)
-#define SMA1303_PCM_N_SLOT12 (11<<0)
-#define SMA1303_PCM_N_SLOT13 (12<<0)
-#define SMA1303_PCM_N_SLOT14 (13<<0)
-#define SMA1303_PCM_N_SLOT15 (14<<0)
-#define SMA1303_PCM_N_SLOT16 (15<<0)
-
-/* INTPUT CTRL4 : 0x04 */
-#define SMA1303_PCM1_SLOT_MASK (15<<4)
-#define SMA1303_PCM1_SLOT1 (0<<4)
-#define SMA1303_PCM1_SLOT2 (1<<4)
-#define SMA1303_PCM1_SLOT3 (2<<4)
-#define SMA1303_PCM1_SLOT4 (3<<4)
-#define SMA1303_PCM1_SLOT5 (4<<4)
-#define SMA1303_PCM1_SLOT6 (5<<4)
-#define SMA1303_PCM1_SLOT7 (6<<4)
-#define SMA1303_PCM1_SLOT8 (7<<4)
-#define SMA1303_PCM1_SLOT9 (8<<4)
-#define SMA1303_PCM1_SLOT10 (9<<4)
-#define SMA1303_PCM1_SLOT11 (10<<4)
-#define SMA1303_PCM1_SLOT12 (11<<4)
-#define SMA1303_PCM1_SLOT13 (12<<4)
-#define SMA1303_PCM1_SLOT14 (13<<4)
-#define SMA1303_PCM1_SLOT15 (14<<4)
-#define SMA1303_PCM1_SLOT16 (15<<4)
-
-#define SMA1303_PCM2_SLOT_MASK (15<<0)
-#define SMA1303_PCM2_SLOT1 (0<<0)
-#define SMA1303_PCM2_SLOT2 (1<<0)
-#define SMA1303_PCM2_SLOT3 (2<<0)
-#define SMA1303_PCM2_SLOT4 (3<<0)
-#define SMA1303_PCM2_SLOT5 (4<<0)
-#define SMA1303_PCM2_SLOT6 (5<<0)
-#define SMA1303_PCM2_SLOT7 (6<<0)
-#define SMA1303_PCM2_SLOT8 (7<<0)
-#define SMA1303_PCM2_SLOT9 (8<<0)
-#define SMA1303_PCM2_SLOT10 (9<<0)
-#define SMA1303_PCM2_SLOT11 (10<<0)
-#define SMA1303_PCM2_SLOT12 (11<<0)
-#define SMA1303_PCM2_SLOT13 (12<<0)
-#define SMA1303_PCM2_SLOT14 (13<<0)
-#define SMA1303_PCM2_SLOT15 (14<<0)
-#define SMA1303_PCM2_SLOT16 (15<<0)
-
-/* OUTPUT CTRL : 0x09 */
-#define SMA1303_PORT_CONFIG_MASK (3<<5)
-#define SMA1303_INPUT_PORT_ONLY (0<<5)
-#define SMA1303_OUTPUT_PORT_ENABLE (2<<5)
-
-#define SMA1303_PORT_OUT_SEL_MASK (7<<0)
-#define SMA1303_OUT_SEL_DISABLE (0<<0)
-#define SMA1303_FORMAT_CONVERTER (1<<0)
-#define SMA1303_MIXER_OUTPUT (2<<0)
-#define SMA1303_SPEAKER_PATH (3<<0)
-#define SMA1303_POSTSCALER_OUTPUT (4<<0)
-
-/* BST_TEST : 0x0B */
-#define SMA1303_BST_OFF_SLOPE_MASK (3<<6)
-#define SMA1303_BST_OFF_SLOPE_6_7ns (0<<6)
-#define SMA1303_BST_OFF_SLOPE_4_8ns (1<<6)
-#define SMA1303_BST_OFF_SLOPE_2_6ns (2<<6)
-#define SMA1303_BST_OFF_SLOPE_1_2ns (3<<6)
-
-#define SMA1303_OCP_TEST_MASK (1<<5)
-#define SMA1303_OCP_NORMAL_MODE (0<<5)
-#define SMA1303_OCP_TEST_MODE (1<<5)
-
-#define SMA1303_BST_FAST_LEBN_MASK (1<<4)
-#define SMA1303_BST_SHORT_LEB (0<<4)
-#define SMA1303_BST_LONG_LEB (1<<4)
-
-#define SMA1303_HIGH_PGAIN_MASK (1<<3)
-#define SMA1303_NORMAL_P_GAIN (0<<3)
-#define SMA1303_HIGH_P_GAIN (1<<3)
-
-#define SMA1303_VCOMP_MASK (1<<2)
-#define SMA1303_VCOMP_NORMAL_MODE (0<<2)
-#define SMA1303_VCOMP_V_MON_MODE (1<<2)
-
-#define SMA1303_PMOS_ON_MASK (1<<1)
-#define SMA1303_PMOS_NORMAL_MODE (0<<1)
-#define SMA1303_PMOS_TEST_MODE (1<<1)
-
-#define SMA1303_NMOS_ON_MASK (1<<0)
-#define SMA1303_NMOS_NORMAL_MODE (0<<0)
-#define SMA1303_NMOS_TEST_MODE (1<<0)
-
-/* BST_TEST1 : 0x0C */
-#define SMA1303_SET_OCP_H_MASK (3<<6)
-#define SMA1303_HIGH_OCP_4_5_LVL (0<<6)
-#define SMA1303_HIGH_OCP_3_2_LVL (1<<6)
-#define SMA1303_HIGH_OCP_2_1_LVL (2<<6)
-#define SMA1303_HIGH_OCP_0_9_LVL (3<<6)
-
-#define SMA1303_OCL_TEST_MASK (1<<5)
-#define SMA1303_OCL_NORMAL_MODE (0<<5)
-#define SMA1303_OCL_TEST_MODE (1<<5)
-
-#define SMA1303_LOOP_CHECK_MASK (1<<4)
-#define SMA1303_BST_LOOP_NORMAL_MODE (0<<4)
-#define SMA1303_BST_LOOP_CHECK_MODE (1<<4)
-
-#define SMA1303_EN_SH_PRT_MASK (1<<3)
-#define SMA1303_EN_SH_PRT_DISABLE (0<<3)
-#define SMA1303_EN_SH_PRT_ENABLE (1<<3)
-
-/* SPK_TEST : 0x0D */
-#define SMA1303_VREF_MON_MASK (1<<3)
-#define SMA1303_VREF_NORMAL_MODE (0<<3)
-#define SMA1303_VREF_V_MON_MODE (1<<3)
-
-#define SMA1303_SPK_OCP_DLYN_MASK (1<<2)
-#define SMA1303_SPK_OCP_LONG_DELAY (0<<2)
-#define SMA1303_SPK_OCP_NORMAL (1<<2)
-
-#define SMA1303_SPK_OFF_SLOPE_MASK (3<<0)
-#define SMA1303_SPK_OFF_SLOPE_SLOW (0<<0)
-#define SMA1303_SPK_OFF_SLOPE_FAST (3<<0)
-
-/* MUTE_VOL_CTRL : 0x0E */
-#define SMA1303_VOL_SLOPE_MASK (3<<6)
-#define SMA1303_VOL_SLOPE_OFF (0<<6)
-#define SMA1303_VOL_SLOPE_SLOW (1<<6)
-#define SMA1303_VOL_SLOPE_MID (2<<6)
-#define SMA1303_VOL_SLOPE_FAST (3<<6)
-
-#define SMA1303_MUTE_SLOPE_MASK (3<<4)
-#define SMA1303_MUTE_SLOPE_OFF (0<<4)
-#define SMA1303_MUTE_SLOPE_SLOW (1<<4)
-#define SMA1303_MUTE_SLOPE_MID (2<<4)
-#define SMA1303_MUTE_SLOPE_FAST (3<<4)
-
-#define SMA1303_SPK_MUTE_MASK (1<<0)
-#define SMA1303_SPK_UNMUTE (0<<0)
-#define SMA1303_SPK_MUTE (1<<0)
-
-/* SYSTEM_CTRL1 :0x10 */
-#define SMA1303_SPK_MODE_MASK (7<<2)
-#define SMA1303_SPK_OFF (0<<2)
-#define SMA1303_SPK_MONO (1<<2)
-#define SMA1303_SPK_STEREO (4<<2)
-
-/* SYSTEM_CTRL2 : 0x11 */
-#define SMA1303_SPK_BS_MASK (1<<6)
-#define SMA1303_SPK_BS_BYP (0<<6)
-#define SMA1303_SPK_BS_EN (1<<6)
-#define SMA1303_SPK_LIM_MASK (1<<5)
-#define SMA1303_SPK_LIM_BYP (0<<5)
-#define SMA1303_SPK_LIM_EN (1<<5)
-
-#define SMA1303_LR_DATA_SW_MASK (1<<4)
-#define SMA1303_LR_DATA_SW_NORMAL (0<<4)
-#define SMA1303_LR_DATA_SW_SWAP (1<<4)
-
-#define SMA1303_MONOMIX_MASK (1<<0)
-#define SMA1303_MONOMIX_OFF (0<<0)
-#define SMA1303_MONOMIX_ON (1<<0)
-
-/* SYSTEM_CTRL3 : 0x12 */
-#define SMA1303_INPUT_MASK (3<<6)
-#define SMA1303_INPUT_0_DB (0<<6)
-#define SMA1303_INPUT_M6_DB (1<<6)
-#define SMA1303_INPUT_M12_DB (2<<6)
-#define SMA1303_INPUT_INFI_DB (3<<6)
-#define SMA1303_INPUT_R_MASK (3<<4)
-#define SMA1303_INPUT_R_0_DB (0<<4)
-#define SMA1303_INPUT_R_M6_DB (1<<4)
-#define SMA1303_INPUT_R_M12_DB (2<<4)
-#define SMA1303_INPUT_R_INFI_DB (3<<4)
-
-/* Modulator : 0x14 */
-#define SMA1303_SPK_HYSFB_MASK (3<<6)
-#define SMA1303_HYSFB_625K (0<<6)
-#define SMA1303_HYSFB_414K (1<<6)
-#define SMA1303_HYSFB_297K (2<<6)
-#define SMA1303_HYSFB_226K (3<<6)
-#define SMA1303_SPK_BDELAY_MASK (63<<0)
-
-/* SDM CONTROL : 0x33 */
-#define SMA1303_SDM_Q_SEL_MASK (1<<2)
-#define SMA1303_QUART_SEL_1_DIV_4 (0<<2)
-#define SMA1303_QUART_SEL_1_DIV_8 (1<<2)
-
-/* OTP_DATA1 : 0x34 */
-#define SMA1303_OTP_LVL_MASK (1<<5)
-#define SMA1303_OTP_LVL_NORMAL (0<<5)
-#define SMA1303_OTP_LVL_LOW (1<<5)
-
-/* PROTECTION : 0x36 */
-#define SMA1303_EDGE_DIS_MASK (1<<7)
-#define SMA1303_EDGE_DIS_ENABLE (0<<7)
-#define SMA1303_EDGE_DIS_DISABLE (1<<7)
-
-#define SMA1303_SPK_OCP_DIS_MASK (1<<3)
-#define SMA1303_SPK_OCP_ENABLE (0<<3)
-#define SMA1303_SPK_OCP_DISABLE (1<<3)
-
-#define SMA1303_OCP_MODE_MASK (1<<2)
-#define SMA1303_AUTO_RECOVER (0<<2)
-#define SMA1303_SHUT_DOWN_PERMANENT (1<<2)
-
-#define SMA1303_OTP_MODE_MASK (3<<0)
-#define SMA1303_OTP_MODE_DISABLE (0<<0)
-#define SMA1303_IG_THR1_SHUT_THR2 (1<<0)
-#define SMA1303_REC_THR1_SHUT_THR2 (2<<0)
-#define SMA1303_SHUT_THR1_SHUT_THR2 (3<<0)
-
-/* TEST2 : 0x3C */
-#define SMA1303_SPK_HSDM_BP_MASK (1<<4)
-#define SMA1303_SPK_HSDM_ENABLE (0<<4)
-#define SMA1303_SPK_HSDM_BYPASS (1<<4)
-
-#define SMA1303_SDM_SYNC_DIS_MASK (1<<5)
-#define SMA1303_SDM_SYNC_NORMAL (0<<5)
-#define SMA1303_SDM_SYNC_DISABLE (1<<5)
-
-/* ATEST2 : 0x3F */
-#define SMA1303_SPK_OUT_FREQ_MASK (1<<2)
-#define SMA1303_SPK_OUT_FREQ_360K (0<<2)
-#define SMA1303_SPK_OUT_FREQ_410K (1<<2)
-
-#define SMA1303_LOW_POWER_MODE_MASK (1<<3)
-#define SMA1303_LOW_POWER_MODE_DISABLE (0<<3)
-#define SMA1303_LOW_POWER_MODE_ENABLE (1<<3)
-
-#define SMA1303_THERMAL_ADJUST_MASK (3<<5)
-#define SMA1303_THERMAL_150_110 (0<<5)
-#define SMA1303_THERMAL_160_120 (1<<5)
-#define SMA1303_THERMAL_140_100 (2<<5)
-
-#define SMA1303_FAST_OFF_DRIVE_SPK_MASK (1<<0)
-#define SMA1303_FAST_OFF_DRIVE_SPK_DISABLE (0<<0)
-#define SMA1303_FAST_OFF_DRIVE_SPK_ENABLE (1<<0)
-
-/* PLL_CTRL : 0x8E */
-#define SMA1303_TRM_LVL_MASK (1<<4)
-#define SMA1303_TRM_LVL_NORMAL (0<<4)
-#define SMA1303_TRM_LVL_LOW (1<<4)
-
-#define SMA1303_LOW_OCL_MODE_MASK (1<<3)
-#define SMA1303_LOW_OCL_MODE (0<<3)
-#define SMA1303_NORMAL_OCL_MODE (1<<3)
-
-#define SMA1303_PLL_PD2_MASK (7<<0)
-#define SMA1303_PLL_PD2 (7<<0)
-#define SMA1303_PLL_OPERATION2 (0<<0)
-
-/* POSTSCALER : 0x90 */
-#define SMA1303_BYP_POST_MASK (1<<0)
-#define SMA1303_EN_POST_SCALER (0<<0)
-#define SMA1303_BYP_POST_SCALER (1<<0)
-
-/* FDPEC CONTROL : 0x92 */
-#define SMA1303_FLT_VDD_GAIN_MASK (15<<4)
-#define SMA1303_FLT_VDD_GAIN_2P40 (0<<4)
-#define SMA1303_FLT_VDD_GAIN_2P45 (1<<4)
-#define SMA1303_FLT_VDD_GAIN_2P50 (2<<4)
-#define SMA1303_FLT_VDD_GAIN_2P55 (3<<4)
-#define SMA1303_FLT_VDD_GAIN_2P60 (4<<4)
-#define SMA1303_FLT_VDD_GAIN_2P65 (5<<4)
-#define SMA1303_FLT_VDD_GAIN_2P70 (6<<4)
-#define SMA1303_FLT_VDD_GAIN_2P75 (7<<4)
-#define SMA1303_FLT_VDD_GAIN_2P80 (8<<4)
-#define SMA1303_FLT_VDD_GAIN_2P85 (9<<4)
-#define SMA1303_FLT_VDD_GAIN_2P90 (10<<4)
-#define SMA1303_FLT_VDD_GAIN_2P95 (11<<4)
-#define SMA1303_FLT_VDD_GAIN_3P00 (12<<4)
-#define SMA1303_FLT_VDD_GAIN_3P05 (13<<4)
-#define SMA1303_FLT_VDD_GAIN_3P10 (14<<4)
-#define SMA1303_FLT_VDD_GAIN_3P15 (15<<4)
-
-#define SMA1303_DIS_FCHG_MASK (1<<2)
-#define SMA1303_EN_FAST_CHARGE (0<<2)
-#define SMA1303_DIS_FAST_CHARGE (1<<2)
-
-/* BOOST_CONTROL4 : 0x97 */
-#define SMA1303_TRM_VBST_MASK (7<<2)
-#define SMA1303_TRM_VBST_5P5 (0<<2)
-#define SMA1303_TRM_VBST_5P6 (1<<2)
-#define SMA1303_TRM_VBST_5P7 (2<<2)
-#define SMA1303_TRM_VBST_5P8 (3<<2)
-#define SMA1303_TRM_VBST_5P9 (4<<2)
-#define SMA1303_TRM_VBST_6P0 (5<<2)
-#define SMA1303_TRM_VBST_6P1 (6<<2)
-#define SMA1303_TRM_VBST_6P2 (7<<2)
-
-/* TOP_MAN1 : 0xA2 */
-#define SMA1303_PLL_LOCK_SKIP_MASK (1<<7)
-#define SMA1303_PLL_LOCK_ENABLE (0<<7)
-#define SMA1303_PLL_LOCK_DISABLE (1<<7)
-
-#define SMA1303_PLL_PD_MASK (1<<6)
-#define SMA1303_PLL_OPERATION (0<<6)
-#define SMA1303_PLL_PD (1<<6)
-
-#define SMA1303_PLL_DIV_MASK (3<<4)
-#define SMA1303_PLL_OUT (0<<4)
-#define SMA1303_PLL_OUT_2 (1<<4)
-#define SMA1303_PLL_OUT_4 (2<<4)
-#define SMA1303_PLL_OUT_8 (3<<4)
-
-#define SMA1303_PLL_REF_CLK_MASK (1<<3)
-#define SMA1303_PLL_REF_CLK1 (0<<3)
-#define SMA1303_PLL_SCK (1<<3)
-
-#define SMA1303_DAC_DN_CONV_MASK (1<<2)
-#define SMA1303_DAC_DN_CONV_DISABLE (0<<2)
-#define SMA1303_DAC_DN_CONV_ENABLE (1<<2)
-
-#define SMA1303_SDO_IO_MASK (1<<1)
-#define SMA1303_HIGH_Z_LRCK_H (0<<1)
-#define SMA1303_HIGH_Z_LRCK_L (1<<1)
-
-#define SMA1303_SDO_OUTPUT2_MASK (1<<0)
-#define SMA1303_SDO_NORMAL (0<<0)
-#define SMA1303_SDO_OUTPUT_ONLY (1<<0)
-
-/* TOP_MAN2 : 0xA3 */
-#define SMA1303_MON_OSC_PLL_MASK (1<<7)
-#define SMA1303_PLL_SDO (0<<7)
-#define SMA1303_OSC_SDO (1<<7)
-
-#define SMA1303_TEST_CLKO_EN_MASK (1<<6)
-#define SMA1303_NORMAL_SDO (0<<6)
-#define SMA1303_CLK_OUT_SDO (1<<6)
-
-#define SMA1303_SDO_OUTPUT_MASK (1<<3)
-#define SMA1303_NORMAL_OUT (0<<3)
-#define SMA1303_HIGH_Z_OUT (1<<3)
-
-#define SMA1303_CLOCK_MON_MASK (1<<1)
-#define SMA1303_CLOCK_MON (0<<1)
-#define SMA1303_CLOCK_NOT_MON (1<<1)
-
-#define SMA1303_OSC_PD_MASK (1<<0)
-#define SMA1303_NORMAL_OPERATION_OSC (0<<0)
-#define SMA1303_POWER_DOWN_OSC (1<<0)
-
-/* TOP_MAN3 0xA4 */
-#define SMA1303_O_FORMAT_MASK (7<<5)
-#define SMA1303_O_FMT_LJ (1<<5)
-#define SMA1303_O_FMT_I2S (2<<5)
-#define SMA1303_O_FMT_TDM (4<<5)
-
-#define SMA1303_SCK_RATE_MASK (1<<3)
-#define SMA1303_SCK_64FS (0<<3)
-#define SMA1303_SCK_32FS (2<<3)
-
-#define SMA1303_LRCK_POL_MASK (1<<0)
-#define SMA1303_L_VALID (0<<0)
-#define SMA1303_R_VALID (1<<0)
-
-/* TDM1 FORMAT : 0xA5 */
-#define SMA1303_TDM_CLK_POL_MASK (1<<7)
-#define SMA1303_TDM_CLK_POL_RISE (0<<7)
-#define SMA1303_TDM_CLK_POL_FALL (1<<7)
-
-#define SMA1303_TDM_TX_MODE_MASK (1<<6)
-#define SMA1303_TDM_TX_MONO (0<<6)
-#define SMA1303_TDM_TX_STEREO (1<<6)
-
-#define SMA1303_TDM_SLOT1_RX_POS_MASK (7<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_0 (0<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_1 (1<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_2 (2<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_3 (3<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_4 (4<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_5 (5<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_6 (6<<3)
-#define SMA1303_TDM_SLOT1_RX_POS_7 (7<<3)
-
-#define SMA1303_TDM_SLOT2_RX_POS_MASK (7<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_0 (0<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_1 (1<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_2 (2<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_3 (3<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_4 (4<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_5 (5<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_6 (6<<0)
-#define SMA1303_TDM_SLOT2_RX_POS_7 (7<<0)
-
-/* TDM2 FORMAT : 0xA6 */
-#define SMA1303_TDM_DL_MASK (1<<7)
-#define SMA1303_TDM_DL_16 (0<<7)
-#define SMA1303_TDM_DL_32 (1<<7)
-
-#define SMA1303_TDM_N_SLOT_MASK (1<<6)
-#define SMA1303_TDM_N_SLOT_4 (0<<6)
-#define SMA1303_TDM_N_SLOT_8 (1<<6)
-
-#define SMA1303_TDM_SLOT1_TX_POS_MASK (7<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_0 (0<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_1 (1<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_2 (2<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_3 (3<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_4 (4<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_5 (5<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_6 (6<<3)
-#define SMA1303_TDM_SLOT1_TX_POS_7 (7<<3)
-
-#define SMA1303_TDM_SLOT2_TX_POS_MASK (7<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_0 (0<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_1 (1<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_2 (2<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_3 (3<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_4 (4<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_5 (5<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_6 (6<<0)
-#define SMA1303_TDM_SLOT2_TX_POS_7 (7<<0)
-
-/* STATUS1 : 0xFA */
-#define SMA1303_OT1_OK_STATUS (1<<7)
-#define SMA1303_OT2_OK_STATUS (1<<6)
-
-/* STATUS2 : 0xFB */
-#define SMA1303_OCP_SPK_STATUS (1<<5)
-#define SMA1303_OCP_BST_STATUS (1<<4)
-#define SMA1303_OTP_STAT_OK_0 (5<<1)
-#define SMA1303_OTP_STAT_OK_1 (2<<2)
-
-#define SMA1303_CLK_MON_STATUS (1<<0)
-
-/* DEVICE_INFO : 0xFF */
-#define SMA1303_DEVICE_ID (2<<3)
-#define SMA1303_UVLO_BST_STATUS (1<<2)
-#define SMA1303_REV_NUM_STATUS (3<<0)
-#define SMA1303_REV_NUM_TV0 (0<<0)
-#define SMA1303_REV_NUM_TV1 (1<<0)
-
-#endif