[v3,13/15] phy: qcom-qmp-pcie: add support for pipediv2 clock
Commit Message
Some QMP PHYs have a second fixed-divider pipe clock that needs to be
enabled along with the pipe clock.
Add support for an optional "pipediv2" clock.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 25 ++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
Comments
On 21/10/2022 14:09, Johan Hovold wrote:
> Some QMP PHYs have a second fixed-divider pipe clock that needs to be
> enabled along with the pipe clock.
>
> Add support for an optional "pipediv2" clock.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 25 ++++++++++++++----------
> 1 file changed, 15 insertions(+), 10 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
@@ -1378,8 +1378,10 @@ struct qmp_pcie {
void __iomem *tx2;
void __iomem *rx2;
- struct clk *pipe_clk;
struct clk_bulk_data *clks;
+ struct clk_bulk_data pipe_clks[2];
+ int num_pipe_clks;
+
struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
@@ -1923,11 +1925,9 @@ static int qmp_pcie_power_on(struct phy *phy)
qmp_pcie_init_registers(qmp, &cfg->tables);
qmp_pcie_init_registers(qmp, mode_tables);
- ret = clk_prepare_enable(qmp->pipe_clk);
- if (ret) {
- dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
+ ret = clk_bulk_prepare_enable(qmp->num_pipe_clks, qmp->pipe_clks);
+ if (ret)
return ret;
- }
/* Pull PHY out of reset state */
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
@@ -1950,7 +1950,7 @@ static int qmp_pcie_power_on(struct phy *phy)
return 0;
err_disable_pipe_clk:
- clk_disable_unprepare(qmp->pipe_clk);
+ clk_bulk_disable_unprepare(qmp->num_pipe_clks, qmp->pipe_clks);
return ret;
}
@@ -1960,7 +1960,7 @@ static int qmp_pcie_power_off(struct phy *phy)
struct qmp_pcie *qmp = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qmp->cfg;
- clk_disable_unprepare(qmp->pipe_clk);
+ clk_bulk_disable_unprepare(qmp->num_pipe_clks, qmp->pipe_clks);
/* PHY reset */
qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
@@ -2154,6 +2154,7 @@ static int qmp_pcie_parse_dt_legacy(struct qmp_pcie *qmp, struct device_node *np
struct platform_device *pdev = to_platform_device(qmp->dev);
const struct qmp_phy_cfg *cfg = qmp->cfg;
struct device *dev = qmp->dev;
+ struct clk *clk;
qmp->serdes = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(qmp->serdes))
@@ -2206,12 +2207,16 @@ static int qmp_pcie_parse_dt_legacy(struct qmp_pcie *qmp, struct device_node *np
}
}
- qmp->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
- if (IS_ERR(qmp->pipe_clk)) {
- return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
+ clk = devm_get_clk_from_child(dev, np, NULL);
+ if (IS_ERR(clk)) {
+ return dev_err_probe(dev, PTR_ERR(clk),
"failed to get pipe clock\n");
}
+ qmp->num_pipe_clks = 1;
+ qmp->pipe_clks[0].id = "pipe";
+ qmp->pipe_clks[0].clk = clk;
+
return 0;
}