diff mbox series

[v2,1/2] dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master

Message ID 20230125225416.4074040-2-eajames@linux.ibm.com
State New
Headers
Series fsi: Add IBM I2C Responder virtual FSI master |

Commit Message

Eddie James Jan. 25, 2023, 10:54 p.m. UTC 
  The I2C Responder translates I2C commands to CFAM or SCOM operations,
effectively implementing an FSI master.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 .../bindings/fsi/ibm,i2cr-fsi-master.yaml     | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml

Comments

Rob Herring Jan. 26, 2023, 2:54 a.m. UTC | #1 
On Wed, 25 Jan 2023 16:54:15 -0600, Eddie James wrote:
> The I2C Responder translates I2C commands to CFAM or SCOM operations,
> effectively implementing an FSI master.
> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
>  .../bindings/fsi/ibm,i2cr-fsi-master.yaml     | 41 +++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml:32:2: [warning] wrong indentation: expected 2 but found 1 (indentation)

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230125225416.4074040-2-eajames@linux.ibm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
new file mode 100644
index 000000000000..fa768e773adc
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -0,0 +1,41 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,i2cr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM I2C Responder virtual FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM
+  (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and
+  writes or SCOM operations, thereby acting as an FSI master.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2cr-fsi-master
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+ - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2cr@20 {
+        compatible = "ibm,i2cr-fsi-master";
+        reg = <0x20>;
+      };
+    };