[V1,7/8] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support

Message ID 20230124141541.8290-8-quic_devipriy@quicinc.com
State New
Headers
Series Add minimal boot support for IPQ9574 |

Commit Message

Devi Priya Jan. 24, 2023, 2:15 p.m. UTC
  From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>

Add initial device tree support for Qualcomm IPQ9574 SoC
and AL02 board

Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Co-developed-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile            |   1 +
 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
 3 files changed, 364 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
  

Comments

Krzysztof Kozlowski Jan. 24, 2023, 3:14 p.m. UTC | #1
On 24/01/2023 15:15, devi priya wrote:
> From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> 
> Add initial device tree support for Qualcomm IPQ9574 SoC
> and AL02 board
> 
> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> Co-developed-by: devi priya <quic_devipriy@quicinc.com>
> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile            |   1 +
>  arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
>  3 files changed, 364 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..872c62028a0b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-al02-c7.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb

This does not match current tree, so I could not apply it for tests. I
think you based it on a bit older version.

Best regards,
Krzysztof
  
Dmitry Baryshkov Jan. 24, 2023, 5:11 p.m. UTC | #2
On Tue, 24 Jan 2023 at 16:17, devi priya <quic_devipriy@quicinc.com> wrote:
>
> From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>
> Add initial device tree support for Qualcomm IPQ9574 SoC
> and AL02 board
>
> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> Co-developed-by: devi priya <quic_devipriy@quicinc.com>
> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>


I suspect that the order of sign-offs is incorrect here. Your sign-off
should be the last one, as you are the person sending the patch.
  
Devi Priya Jan. 25, 2023, 11:07 a.m. UTC | #3
On 1/24/2023 10:41 PM, Dmitry Baryshkov wrote:
> On Tue, 24 Jan 2023 at 16:17, devi priya <quic_devipriy@quicinc.com> wrote:
>>
>> From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>
>> Add initial device tree support for Qualcomm IPQ9574 SoC
>> and AL02 board
>>
>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>> Co-developed-by: devi priya <quic_devipriy@quicinc.com>
>> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> 
> 
> I suspect that the order of sign-offs is incorrect here. Your sign-off
> should be the last one, as you are the person sending the patch.
> 
> 
Sure, will update

Best Regards,
Devi Priya
  
Devi Priya Jan. 25, 2023, 11:12 a.m. UTC | #4
On 1/24/2023 8:44 PM, Krzysztof Kozlowski wrote:
> On 24/01/2023 15:15, devi priya wrote:
>> From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>
>> Add initial device tree support for Qualcomm IPQ9574 SoC
>> and AL02 board
>>
>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>> Co-developed-by: devi priya <quic_devipriy@quicinc.com>
>> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile            |   1 +
>>   arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
>>   3 files changed, 364 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 3e79496292e7..872c62028a0b 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-al02-c7.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
> 
> This does not match current tree, so I could not apply it for tests. I
> think you based it on a bit older version.
> 
The patch series is based on Linux 6.2-rc1 and not the qcom/for-next 
branch.
> Best regards,
> Krzysztof
> 
Best Regards,
Devi Priya
  
Konrad Dybcio Jan. 25, 2023, 11:40 p.m. UTC | #5
On 25.01.2023 12:12, Devi Priya wrote:
> 
> 
> On 1/24/2023 8:44 PM, Krzysztof Kozlowski wrote:
>> On 24/01/2023 15:15, devi priya wrote:
>>> From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>
>>> Add initial device tree support for Qualcomm IPQ9574 SoC
>>> and AL02 board
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>>> Co-developed-by: devi priya <quic_devipriy@quicinc.com>
>>> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/Makefile            |   1 +
>>>   arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
>>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
>>>   3 files changed, 364 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 3e79496292e7..872c62028a0b 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += ipq6018-cp01-c1.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk01.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c1.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c2.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)    += ipq9574-al02-c7.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-alcatel-idol347.dtb
>>
>> This does not match current tree, so I could not apply it for tests. I
>> think you based it on a bit older version.
>>
> The patch series is based on Linux 6.2-rc1 and not the qcom/for-next branch.
Linux 6.2-rc1 is very old already and Bjorn has already picked
tens of patches atop it, so yours will not apply unless you
base it on qcom/for-next (or just linux-next for that matter).

Konrad
>> Best regards,
>> Krzysztof
>>
> Best Regards,
> Devi Priya
  
Devi Priya Jan. 27, 2023, 9:38 a.m. UTC | #6
On 1/26/2023 5:10 AM, Konrad Dybcio wrote:
> 
> 
> On 25.01.2023 12:12, Devi Priya wrote:
>>
>>
>> On 1/24/2023 8:44 PM, Krzysztof Kozlowski wrote:
>>> On 24/01/2023 15:15, devi priya wrote:
>>>> From: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>>
>>>> Add initial device tree support for Qualcomm IPQ9574 SoC
>>>> and AL02 board
>>>>
>>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>>>> Co-developed-by: devi priya <quic_devipriy@quicinc.com>
>>>> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
>>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/Makefile            |   1 +
>>>>    arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts |  78 +++++
>>>>    arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 285 +++++++++++++++++++
>>>>    3 files changed, 364 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index 3e79496292e7..872c62028a0b 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += ipq6018-cp01-c1.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk01.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c1.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c2.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM)    += ipq9574-al02-c7.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += msm8916-alcatel-idol347.dtb
>>>
>>> This does not match current tree, so I could not apply it for tests. I
>>> think you based it on a bit older version.
>>>
>> The patch series is based on Linux 6.2-rc1 and not the qcom/for-next branch.
> Linux 6.2-rc1 is very old already and Bjorn has already picked
> tens of patches atop it, so yours will not apply unless you
> base it on qcom/for-next (or just linux-next for that matter).
> 
Sure got it. Will post V3 based on linux-next
> Konrad
>>> Best regards,
>>> Krzysztof
>>>
>> Best Regards,
>> Devi Priya
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 3e79496292e7..872c62028a0b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -7,6 +7,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-al02-c7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-huawei-g7.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
new file mode 100644
index 000000000000..4aa06e4f63c7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
@@ -0,0 +1,78 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 AL02-C7 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+				"gpio3", "gpio6", "gpio7",
+				"gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 000000000000..1f34ebc8724f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,285 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <353000000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_region: memory@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			gpio-reserved-ranges = <59 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <&bias_pll_ubi_nc_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "bias_pll_ubi_nc_clk",
+				      "pcie30_phy0_pipe_clk",
+				      "pcie30_phy1_pipe_clk",
+				      "pcie30_phy2_pipe_clk",
+				      "pcie30_phy3_pipe_clk",
+				      "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+			max-frequency = <384000000>;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x1000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x1000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x0 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};