@@ -799,6 +799,7 @@ config SENSORS_IT87
config SENSORS_JC42
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here, you get support for JEDEC JC42.4 compliant
temperature sensors, which are used on many DDR3 memory modules for
@@ -19,6 +19,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/regmap.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
@@ -216,7 +217,7 @@ static const u8 temp_regs[t_num_temp] = {
/* Each client has this additional data */
struct jc42_data {
- struct i2c_client *client;
+ struct regmap *regmap;
struct mutex update_lock; /* protect register access */
bool extended; /* true if extended range supported */
bool valid;
@@ -251,19 +252,16 @@ static int jc42_temp_from_reg(s16 reg)
static struct jc42_data *jc42_update_device(struct device *dev)
{
struct jc42_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
- struct jc42_data *ret = data;
- int i, val;
+ unsigned int i, val;
+ int ret;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
for (i = 0; i < t_num_temp; i++) {
- val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
- if (val < 0) {
- ret = ERR_PTR(val);
+ ret = regmap_read(data->regmap, temp_regs[i], &val);
+ if (ret)
goto abort;
- }
data->temp[i] = val;
}
data->last_updated = jiffies;
@@ -271,7 +269,7 @@ static struct jc42_data *jc42_update_device(struct device *dev)
}
abort:
mutex_unlock(&data->update_lock);
- return ret;
+ return ret ? ERR_PTR(ret) : data;
}
static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
@@ -326,7 +324,6 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
struct jc42_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
int diff, hyst;
int ret;
@@ -335,18 +332,18 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_temp_min:
data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
- data->temp[t_min]);
+ ret = regmap_write(data->regmap, temp_regs[t_min],
+ data->temp[t_min]);
break;
case hwmon_temp_max:
data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
- data->temp[t_max]);
+ ret = regmap_write(data->regmap, temp_regs[t_max],
+ data->temp[t_max]);
break;
case hwmon_temp_crit:
data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
- data->temp[t_crit]);
+ ret = regmap_write(data->regmap, temp_regs[t_crit],
+ data->temp[t_crit]);
break;
case hwmon_temp_crit_hyst:
/*
@@ -368,9 +365,8 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
}
data->config = (data->config & ~JC42_CFG_HYST_MASK) |
(hyst << JC42_CFG_HYST_SHIFT);
- ret = i2c_smbus_write_word_swapped(data->client,
- JC42_REG_CONFIG,
- data->config);
+ ret = regmap_write(data->regmap, JC42_REG_CONFIG,
+ data->config);
break;
default:
ret = -EOPNOTSUPP;
@@ -470,51 +466,79 @@ static const struct hwmon_chip_info jc42_chip_info = {
.info = jc42_info,
};
+static bool jc42_readable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg >= JC42_REG_CAP && reg <= JC42_REG_DEVICEID) ||
+ reg == JC42_REG_SMBUS;
+}
+
+static bool jc42_writable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg >= JC42_REG_CONFIG && reg <= JC42_REG_TEMP_CRITICAL) ||
+ reg == JC42_REG_SMBUS;
+}
+
+static bool jc42_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return reg == JC42_REG_CONFIG || reg == JC42_REG_TEMP;
+}
+
+static const struct regmap_config jc42_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+ .max_register = JC42_REG_SMBUS,
+ .writeable_reg = jc42_writable_reg,
+ .readable_reg = jc42_readable_reg,
+ .volatile_reg = jc42_volatile_reg,
+};
+
static int jc42_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
+ unsigned int config, cap;
struct jc42_data *data;
- int config, cap;
+ int ret;
data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->client = client;
+ data->regmap = devm_regmap_init_i2c(client, &jc42_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
- if (cap < 0)
- return cap;
+ ret = regmap_read(data->regmap, JC42_REG_CAP, &cap);
+ if (ret)
+ return ret;
data->extended = !!(cap & JC42_CAP_RANGE);
if (device_property_read_bool(dev, "smbus-timeout-disable")) {
- int smbus;
-
/*
* Not all chips support this register, but from a
* quick read of various datasheets no chip appears
* incompatible with the below attempt to disable
* the timeout. And the whole thing is opt-in...
*/
- smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
- if (smbus < 0)
- return smbus;
- i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
- smbus | SMBUS_STMOUT);
+ ret = regmap_set_bits(data->regmap, JC42_REG_SMBUS,
+ SMBUS_STMOUT);
+ if (ret)
+ return ret;
}
- config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
- if (config < 0)
- return config;
+ ret = regmap_read(data->regmap, JC42_REG_CONFIG, &config);
+ if (ret)
+ return ret;
data->orig_config = config;
if (config & JC42_CFG_SHUTDOWN) {
config &= ~JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, config);
}
data->config = config;
@@ -535,7 +559,7 @@ static void jc42_remove(struct i2c_client *client)
config = (data->orig_config & ~JC42_CFG_HYST_MASK)
| (data->config & JC42_CFG_HYST_MASK);
- i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, config);
}
}
@@ -546,8 +570,7 @@ static int jc42_suspend(struct device *dev)
struct jc42_data *data = dev_get_drvdata(dev);
data->config |= JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
- data->config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -556,8 +579,7 @@ static int jc42_resume(struct device *dev)
struct jc42_data *data = dev_get_drvdata(dev);
data->config &= ~JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
- data->config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
return 0;
}