xtensa: Eliminate unnecessary general-purpose reg-reg moves
Checks
Commit Message
Register-register move instructions that can be easily seen as
unnecessary by the human eye may remain in the compiled result.
For example:
/* example */
double test(double a, double b) {
return __builtin_copysign(a, b);
}
test:
add.n a3, a3, a3
extui a5, a5, 31, 1
ssai 1
;; be in the same BB
src a7, a5, a3 ;; No '0' in the source constraints
;; No CALL insns in this span
;; Both A3 and A7 are irrelevant to
;; insns in this span
mov.n a3, a7 ;; An unnecessary reg-reg move
;; A7 is not used after this
ret.n
The last two instructions above, excluding the return instruction,
could be done like this:
src a3, a5, a3
This symptom often occurs when handling DI/DFmode values with SImode
instructions. This patch solves the above problem using peephole2
pattern.
gcc/ChangeLog:
* config/xtensa/xtensa.md: New peephole2 pattern that eliminates
the occurrence of genral-purpose register used only once and for
transferring intermediate value.
---
gcc/config/xtensa/xtensa.md | 44 +++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
Comments
Hi Suwa-san,
On Mon, Jan 16, 2023 at 8:54 PM Takayuki 'January June' Suwa
<jjsuwa_sys3175@yahoo.co.jp> wrote:
>
> Register-register move instructions that can be easily seen as
> unnecessary by the human eye may remain in the compiled result.
> For example:
>
> /* example */
> double test(double a, double b) {
> return __builtin_copysign(a, b);
> }
>
> test:
> add.n a3, a3, a3
> extui a5, a5, 31, 1
> ssai 1
> ;; be in the same BB
> src a7, a5, a3 ;; No '0' in the source constraints
> ;; No CALL insns in this span
> ;; Both A3 and A7 are irrelevant to
> ;; insns in this span
> mov.n a3, a7 ;; An unnecessary reg-reg move
> ;; A7 is not used after this
> ret.n
>
> The last two instructions above, excluding the return instruction,
> could be done like this:
>
> src a3, a5, a3
>
> This symptom often occurs when handling DI/DFmode values with SImode
> instructions. This patch solves the above problem using peephole2
> pattern.
>
> gcc/ChangeLog:
>
> * config/xtensa/xtensa.md: New peephole2 pattern that eliminates
> the occurrence of genral-purpose register used only once and for
> transferring intermediate value.
> ---
> gcc/config/xtensa/xtensa.md | 44 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
This change results in a bunch of ICEs with the following backtrace:
gcc/libgcc/unwind-dw2.c: In function ‘execute_cfa_program_specialized’:
gcc/libgcc/unwind-dw2.c:972:1: internal compiler error: RTL check:
expected elt 2 type 'B', have '0' (rtx barrier) in BLOCK_FOR_INSN, at
rtl.h:1493
972 | }
| ^
0x6c3334 rtl_check_failed_type1(rtx_def const*, int, int, char const*,
int, char const*)
gcc/gcc/rtl.cc:897
0x7bf285 BLOCK_FOR_INSN(rtx_def*)
gcc/gcc/rtl.h:1493
0x7c448d BLOCK_FOR_INSN(rtx_def*)
gcc/gcc/rtl.h:1509
0x7c448d gen_peephole2_4(rtx_insn*, rtx_def**)
gcc/gcc/config/xtensa/xtensa.md:3102
0xe1cce2 peephole2_optimize
gcc/gcc/recog.cc:4180
0xe1cce2 rest_of_handle_peephole2
gcc/gcc/recog.cc:4331
0xe1cce2 execute
gcc/gcc/recog.cc:4368
@@ -3089,3 +3089,47 @@ FALLTHRU:;
df_insn_rescan (insnR);
set_insn_deleted (insnP);
})
+
+(define_peephole2
+ [(set (match_operand 0 "register_operand")
+ (match_operand 1 "register_operand"))]
+ "GET_MODE_SIZE (GET_MODE (operands[0])) == 4
+ && GET_MODE_SIZE (GET_MODE (operands[1])) == 4
+ && GP_REG_P (REGNO (operands[0])) && GP_REG_P (REGNO (operands[1]))
+ && peep2_reg_dead_p (1, operands[1])"
+ [(const_int 0)]
+{
+ basic_block bb = BLOCK_FOR_INSN (curr_insn);
+ rtx dest = operands[0], src = operands[1], pattern, t_dest;
+ rtx_insn *insn;
+ int i;
+ for (insn = PREV_INSN (curr_insn);
+ insn && BLOCK_FOR_INSN (insn) == bb;
+ insn = PREV_INSN (insn))
+ if (CALL_P (insn))
+ break;
+ else if (INSN_P (insn))
+ {
+ if (GET_CODE (pattern = PATTERN (insn)) == SET
+ && REG_P (t_dest = SET_DEST (pattern))
+ && GET_MODE_SIZE (GET_MODE (t_dest)) == 4
+ && REGNO (t_dest) == REGNO (src)
+ && ! REG_P (SET_SRC (pattern)))
+ {
+ extract_constrain_insn (insn);
+ for (i = 1; i < recog_data.n_operands; ++i)
+ if (strchr (recog_data.constraints[i], '0'))
+ goto ABORT;
+ SET_REGNO (t_dest, REGNO (dest));
+ goto FALLTHRU;
+ }
+ if (reg_overlap_mentioned_p (dest, pattern)
+ || reg_overlap_mentioned_p (src, pattern)
+ || set_of (dest, insn)
+ || set_of (src, insn))
+ break;
+ }
+ABORT:
+ FAIL;
+FALLTHRU:;
+})