@@ -287,7 +287,7 @@ u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,
if ((*pold_state == Ndis802_11Infrastructure) || (*pold_state == Ndis802_11IBSS)) {
if (check_fwstate(pmlmepriv, _FW_LINKED))
- rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have chked whether issue dis-assoc_cmd or not */
+ rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have cheked whether issue dis-assoc_cmd or not */
}
*pold_state = networktype;
@@ -137,7 +137,7 @@ static struct rt_channel_plan_map RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
{0x03}, /* 0x41, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G */
};
-static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the conbination for max channel numbers */
+static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the combination for max channel numbers */
/*
* Search the @param channel_num in given @param channel_set
@@ -1754,7 +1754,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr)
p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */
/* Commented by Albert 20110306 */
- /* According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes */
+ /* According to the P2P Specification, the group negotiation request frame should contain 9 P2P attributes */
/* 1. P2P Capability */
/* 2. Group Owner Intent */
/* 3. Configuration Timeout */
@@ -2109,7 +2109,7 @@ static void issue_p2p_GO_response(struct adapter *padapter, u8 *raddr, u8 *frame
p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */
/* Commented by Albert 20100908 */
- /* According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes */
+ /* According to the P2P Specification, the group negotiation response frame should contain 9 P2P attributes */
/* 1. Status */
/* 2. P2P Capability */
/* 3. Group Owner Intent */
@@ -2405,7 +2405,7 @@ static void issue_p2p_GO_confirm(struct adapter *padapter, u8 *raddr, u8 result)
p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */
/* Commented by Albert 20110306 */
- /* According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes */
+ /* According to the P2P Specification, the group negotiation request frame should contain 5 P2P attributes */
/* 1. Status */
/* 2. P2P Capability */
/* 3. Operating Channel */
@@ -4013,7 +4013,7 @@ struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)
/****************************************************************************
-Following are some TX fuctions for WiFi MLME
+Following are some TX functions for WiFi MLME
*****************************************************************************/
@@ -4615,7 +4615,7 @@ int issue_probereq_ex(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
return ret;
}
-/* if psta == NULL, indiate we are station(client) now... */
+/* if psta == NULL, indicate we are station(client) now... */
void issue_auth(struct adapter *padapter, struct sta_info *psta, unsigned short status)
{
struct xmit_frame *pmgntframe;
@@ -5014,7 +5014,7 @@ void issue_assocreq(struct adapter *padapter)
if (!padapter->registrypriv.wifi_spec) {
/* Commented by Kurt 20110629 */
/* In some older APs, WPS handshake */
- /* would be fail if we append vender extensions informations to AP */
+ /* would be fail if we append vender extensions information to AP */
if (!memcmp(pIE->data, WPS_OUI, 4))
pIE->Length = 14;
}
@@ -5169,7 +5169,7 @@ void issue_assocreq(struct adapter *padapter)
kfree(pmlmepriv->assoc_req);
}
-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack)
{
int ret = _FAIL;
@@ -5238,7 +5238,7 @@ static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned
return ret;
}
-/* when wait_ms > 0 , this function shoule be called at process context */
+/* when wait_ms > 0 , this function should be called at process context */
/* da == NULL for station mode */
int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
{
@@ -5247,7 +5247,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
- /* da == NULL, assum it's null data for sta to ap*/
+ /* da == NULL, assume it's null data for sta to ap*/
if (!da)
da = get_my_bssid(&pmlmeinfo->network);
@@ -5271,7 +5271,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
return ret;
}
-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int wait_ack)
{
int ret = _FAIL;
@@ -5344,7 +5344,7 @@ static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16
return ret;
}
-/* when wait_ms > 0 , this function shoule be called at process context */
+/* when wait_ms > 0 , this function should be called at process context */
/* da == NULL for station mode */
int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
{
@@ -5353,7 +5353,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
- /* da == NULL, assum it's null data for sta to ap*/
+ /* da == NULL, assume it's null data for sta to ap*/
if (!da)
da = get_my_bssid(&pmlmeinfo->network);
@@ -5885,7 +5885,7 @@ static void rtw_set_opmode(struct adapter *adapter, u8 mode)
/****************************************************************************
-Following are some utitity fuctions for WiFi MLME
+Following are some utility functions for WiFi MLME
*****************************************************************************/
@@ -6058,7 +6058,7 @@ void site_survey(struct adapter *padapter)
} else {
/* 20100721:Interrupt scan operation here. */
/* For SW antenna diversity before link, it needs to switch to another antenna and scan again. */
- /* It compares the scan result and select beter one to do connection. */
+ /* It compares the scan result and select better one to do connection. */
if (AntDivBeforeLink8188E(padapter)) {
pmlmeext->sitesurvey_res.bss_cnt = 0;
pmlmeext->sitesurvey_res.channel_idx = -1;
@@ -6328,7 +6328,7 @@ void start_create_ibss(struct adapter *padapter)
/* update wireless mode */
update_wireless_mode(padapter);
- /* udpate capability */
+ /* update capability */
caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
update_capinfo(padapter, caps);
if (caps & cap_IBSS) {/* adhoc master */
@@ -6378,7 +6378,7 @@ void start_clnt_join(struct adapter *padapter)
/* update wireless mode */
update_wireless_mode(padapter);
- /* udpate capability */
+ /* update capability */
caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
update_capinfo(padapter, caps);
if (caps & cap_ESS) {
@@ -6972,7 +6972,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
/* BCN interval */
rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
- /* udpate capability */
+ /* update capability */
update_capinfo(padapter, pmlmeinfo->capability);
/* WMM, Update EDCA param */
@@ -972,7 +972,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
if (psta->sleepq_len == 0) {
pstapriv->tim_bitmap &= ~BIT(psta->aid);
- /* upate BCN for TIM IE */
+ /* update BCN for TIM IE */
/* update_BCNTIM(padapter); */
update_beacon(padapter, _TIM_IE_, NULL, false);
}
@@ -986,7 +986,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
pstapriv->tim_bitmap &= ~BIT(psta->aid);
- /* upate BCN for TIM IE */
+ /* update BCN for TIM IE */
/* update_BCNTIM(padapter); */
update_beacon(padapter, _TIM_IE_, NULL, false);
}
@@ -1984,13 +1984,13 @@ static void rtw_signal_stat_timer_hdl(struct timer_list *t)
} else {
if (recvpriv->signal_strength_data.update_req == 0) {/* update_req is clear, means we got rx */
avg_signal_strength = recvpriv->signal_strength_data.avg_val;
- /* after avg_vals are accquired, we can re-stat the signal values */
+ /* after avg_vals are acquired, we can re-stat the signal values */
recvpriv->signal_strength_data.update_req = 1;
}
if (recvpriv->signal_qual_data.update_req == 0) {/* update_req is clear, means we got rx */
avg_signal_qual = recvpriv->signal_qual_data.avg_val;
- /* after avg_vals are accquired, we can re-stat the signal values */
+ /* after avg_vals are acquired, we can re-stat the signal values */
recvpriv->signal_qual_data.update_req = 1;
}
@@ -69,7 +69,7 @@ void ODM_TxPwrTrackAdjust88E(struct odm_dm_struct *dm_odm, u8 Type,/* 0 = OFDM,
/*-----------------------------------------------------------------------------
* Function: odm_TxPwrTrackSetPwr88E()
*
- * Overview: 88E change all channel tx power accordign to flag.
+ * Overview: 88E change all channel tx power according to flag.
* OFDM & CCK are all different.
*
* Input: NONE
@@ -194,7 +194,7 @@ static void odm_HWAntDiv(struct odm_dm_struct *dm_odm)
for (i = 0; i < ODM_ASSOCIATE_ENTRY_NUM; i++) {
pEntry = dm_odm->pODM_StaInfo[i];
if (IS_STA_VALID(pEntry)) {
- /* 2 Caculate RSSI per Antenna */
+ /* 2 Calculate RSSI per Antenna */
Main_RSSI = (dm_fat_tbl->MainAnt_Cnt[i] != 0) ? (dm_fat_tbl->MainAnt_Sum[i] / dm_fat_tbl->MainAnt_Cnt[i]) : 0;
Aux_RSSI = (dm_fat_tbl->AuxAnt_Cnt[i] != 0) ? (dm_fat_tbl->AuxAnt_Sum[i] / dm_fat_tbl->AuxAnt_Cnt[i]) : 0;
TargetAnt = (Main_RSSI >= Aux_RSSI) ? MAIN_ANT : AUX_ANT;
@@ -355,7 +355,7 @@ void rtl8188e_EfusePowerSwitch(struct adapter *pAdapter, u8 PwrState)
if (PwrState) {
rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);
- /* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid */
+ /* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), default valid */
res = rtw_read16(pAdapter, REG_SYS_ISO_CTRL, &tmpV16);
if (res)
return;
@@ -94,7 +94,7 @@ void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u3
/**
* Function: phy_RFSerialRead
*
-* OverView: Read regster from RF chips
+* OverView: Read register from RF chips
*
* Input:
* struct adapter *Adapter,
@@ -363,7 +363,7 @@ phy_InitBBRFRegisterDefinition(
/* RF Interface (Output and) Enable */
pHalData->PHYRegDef.rfintfe = rFPGA0_XA_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */
- /* Addr of LSSI. Wirte RF register by driver */
+ /* Addr of LSSI. Write RF register by driver */
pHalData->PHYRegDef.rf3wireOffset = rFPGA0_XA_LSSIParameter; /* LSSI Parameter */
/* RF parameter */
@@ -92,7 +92,7 @@
#define rFPGA0_AdDaClockEn 0x888
#define rFPGA0_AnalogParameter4 0x88c
-#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
+#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Transceiver LSSI Readback */
#define rFPGA0_XB_LSSIReadBack 0x8a4
#define rFPGA0_XC_LSSIReadBack 0x8a8
#define rFPGA0_XD_LSSIReadBack 0x8ac
@@ -167,7 +167,7 @@
/* RxIQ DC offset, Rx digital filter, DC notch filter */
#define rOFDM0_XARxAFE 0xc10
-#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imbalance matrix */
#define rOFDM0_XBRxAFE 0xc18
#define rOFDM0_XBRxIQImbalance 0xc1c
#define rOFDM0_XCRxAFE 0xc20
@@ -88,7 +88,7 @@ struct txpowerinfo24g {
/* 9bytes + 1byt + 5bytes and pre 1byte. */
/* For worst case: */
/* | 2byte|----8bytes----|1byte|--7bytes--| 92D */
-/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
+/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */
#define EFUSE_OOB_PROTECT_BYTES_88E 18
#define EFUSE_PROTECT_BYTES_BANK 16
@@ -4,7 +4,7 @@
#ifndef __RTL8188E_SPEC_H__
#define __RTL8188E_SPEC_H__
-/* 8192C Regsiter offset definition */
+/* 8192C Register offset definition */
#define HAL_PS_TIMER_INT_DELAY 50 /* 50 microseconds */
#define HAL_92C_NAV_UPPER_UNIT 128 /* micro-second */
@@ -674,7 +674,7 @@ Current IOREG MAP
#define REG_USB_HRPWM 0xFE58
#define REG_USB_HCPWM 0xFE57
-/* 8192C Regsiter Bit and Content definition */
+/* 8192C Register Bit and Content definition */
/* 0x0000h ~ 0x00FFh System Configuration */
/* 2 SYS_ISO_CTRL */
@@ -1135,7 +1135,7 @@ Current IOREG MAP
#define EEPROM_Default_CrystalCap_88E 0x20
#define EEPROM_Default_ThermalMeter_88E 0x18
-/* New EFUSE deafult value */
+/* New EFUSE default value */
#define EEPROM_DEFAULT_24G_INDEX 0x2D
#define EEPROM_DEFAULT_24G_HT20_DIFF 0X02
#define EEPROM_DEFAULT_24G_OFDM_DIFF 0X04
@@ -455,7 +455,7 @@ struct Tx_Beacon_param
mac[0] == 0
==> CMD mode, return H2C_SUCCESS.
- The following condition must be ture under CMD mode
+ The following condition must be true under CMD mode
mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
s2 == (b1 << 8 | b0);
@@ -508,7 +508,7 @@ struct drvextra_cmd_parm {
unsigned char *pbuf;
};
-/*------------------- Below are used for RF/BB tunning ---------------------*/
+/*------------------- Below are used for RF/BB tuning ---------------------*/
struct setantenna_parm {
u8 tx_antset;
@@ -92,7 +92,7 @@ struct rx_pkt_attrib {
u8 privacy; /* in frame_ctrl field */
u8 bdecrypted;
u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
- * indicate the encrypt algorith */
+ * indicate the encrypt algorithm */
u8 iv_len;
u8 icv_len;
u8 crc_err;
@@ -175,7 +175,7 @@ struct recv_priv {
u8 *precv_buf; /* 4 alignment */
struct __queue free_recv_buf_queue;
u32 free_recv_buf_queue_cnt;
- /* For display the phy informatiom */
+ /* For display the phy information */
u8 is_signal_dbg; /* for debug */
u8 signal_strength_dbg; /* for debug */
s8 rssi;
@@ -116,7 +116,7 @@ struct pkt_attrib {
u32 last_txcmdsz;
u8 nr_frags;
u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
- * indicate the encrypt algorith */
+ * indicate the encrypt algorithm */
u8 iv_len;
u8 icv_len;
u8 iv[18];
@@ -701,7 +701,7 @@ struct ADDBA_request {
#define P2P_WILDCARD_SSID_LEN 7
-/* default value, used when: (1)p2p disabed or (2)p2p enabled
+/* default value, used when: (1)p2p disabled or (2)p2p enabled
* but only do 1 scan phase */
#define P2P_FINDPHASE_EX_NONE 0
/* used when p2p enabled and want to do 1 scan phase and
@@ -766,11 +766,11 @@ enum P2P_STATE {
P2P_STATE_TX_PROVISION_DIS_REQ = 6,
P2P_STATE_RX_PROVISION_DIS_RSP = 7,
P2P_STATE_RX_PROVISION_DIS_REQ = 8,
- /* Doing the group owner negoitation handshake */
+ /* Doing the group owner negotiation handshake */
P2P_STATE_GONEGO_ING = 9,
- /* finish the group negoitation handshake with success */
+ /* finish the group negotiation handshake with success */
P2P_STATE_GONEGO_OK = 10,
- /* finish the group negoitation handshake with failure */
+ /* finish the group negotiation handshake with failure */
P2P_STATE_GONEGO_FAIL = 11,
/* receiving the P2P Inviation request and match with the profile. */
P2P_STATE_RECV_INVITE_REQ_MATCH = 12,
@@ -790,9 +790,9 @@ enum P2P_STATE {
P2P_STATE_RECV_INVITE_REQ_JOIN = 19,
/* recveing the P2P Inviation response with failure */
P2P_STATE_RX_INVITE_RESP_FAIL = 20,
- /* receiving p2p negoitation response with information is not available */
+ /* receiving p2p negotiation response with information is not available */
P2P_STATE_RX_INFOR_NOREADY = 21,
- /* sending p2p negoitation response with information is not available */
+ /* sending p2p negotiation response with information is not available */
P2P_STATE_TX_INFOR_NOREADY = 22,
};
@@ -2647,7 +2647,7 @@ static int rtw_p2p_connect(struct net_device *dev,
u32 peer_channel = 0;
/* Commented by Albert 20110304 */
- /* The input data contains two informations. */
+ /* The input data contains two information. */
/* 1. First information is the MAC address which wants to formate with */
/* 2. Second information is the WPS PINCode or "pbc" string for push button method */
/* Format: 00:E0:4C:00:00:05 */
@@ -2721,7 +2721,7 @@ static void rtw_p2p_invite_req(struct net_device *dev,
uint p2pielen = 0, attr_contentlen = 0;
struct tx_invite_req_info *pinvite_req_info = &pwdinfo->invitereq_info;
- /* The input data contains two informations. */
+ /* The input data contains two information items. */
/* 1. First information is the P2P device address which you want to send to. */
/* 2. Second information is the group id which combines with GO's mac address, space and GO's ssid. */
/* Command line sample: iwpriv wlan0 p2p_set invite ="00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy" */
@@ -2845,7 +2845,7 @@ static void rtw_p2p_prov_disc(struct net_device *dev,
u8 *p2pie;
uint p2pielen = 0, attr_contentlen = 0;
- /* The input data contains two informations. */
+ /* The input data contains two information items. */
/* 1. First information is the MAC address which wants to issue the provisioning discovery request frame. */
/* 2. Second information is the WPS configuration method which wants to discovery */
/* Format: 00:E0:4C:00:00:05_display */