[3/3] optee core: add irq chip using optee async notification

  Adds an irq chip in optee driver to generate interrupts from OP-TEE
notified interrupt events based on optee async notification. Upon such
notification, optee driver invokes OP-TEE to query a pending interrupt
event. If an interrupt notification is pending the invocation return
OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT and optee driver can get the pending
interrupt number with SMC function ID OPTEE_SMC_FUNCID_GET_IT_VALUE.

SMC function ID OPTEE_SMC_FUNCID_SET_IT_MASK allows Linux to mask/unmask
an interrupt notification services.

The optee irq_chip if flagged IRQCHIP_SKIP_SET_WAKE to skip set_wake
as optee interrupt notifications doesn't support the set_wake option.
In case a device is using the optee irq and is marked as wakeup source,
this result in an "Unbalanced IRQ xx wake disable" backtrace, since:
- in irq_set_irq_wake(ON), wake_depth gets incremented, then reset due to
  set_irq_wake_real() returns an error (irq_set_wake() isn't implemented)
- in irq_set_irq_wake(OFF), wake_depth is always 0, hence the warning

Co-developed-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
---
 drivers/tee/optee/optee_private.h |   2 +
 drivers/tee/optee/optee_smc.h     |  78 +++++++++++++++-
 drivers/tee/optee/smc_abi.c       | 142 ++++++++++++++++++++++++++++--
 3 files changed, 216 insertions(+), 6 deletions(-)
  

On Thu, 12 Jan 2023 14:54:24 +0000,
Etienne Carriere <etienne.carriere@linaro.org> wrote:
> 
> Adds an irq chip in optee driver to generate interrupts from OP-TEE
> notified interrupt events based on optee async notification. Upon such
> notification, optee driver invokes OP-TEE to query a pending interrupt
> event. If an interrupt notification is pending the invocation return
> OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT and optee driver can get the pending
> interrupt number with SMC function ID OPTEE_SMC_FUNCID_GET_IT_VALUE.
> 
> SMC function ID OPTEE_SMC_FUNCID_SET_IT_MASK allows Linux to mask/unmask
> an interrupt notification services.
> 
> The optee irq_chip if flagged IRQCHIP_SKIP_SET_WAKE to skip set_wake
> as optee interrupt notifications doesn't support the set_wake option.
> In case a device is using the optee irq and is marked as wakeup source,
> this result in an "Unbalanced IRQ xx wake disable" backtrace, since:
> - in irq_set_irq_wake(ON), wake_depth gets incremented, then reset due to
>   set_irq_wake_real() returns an error (irq_set_wake() isn't implemented)
> - in irq_set_irq_wake(OFF), wake_depth is always 0, hence the warning

Is this relevant information?

>
> Co-developed-by: Pascal Paillet <p.paillet@foss.st.com>
> Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
> Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> ---
>  drivers/tee/optee/optee_private.h |   2 +
>  drivers/tee/optee/optee_smc.h     |  78 +++++++++++++++-
>  drivers/tee/optee/smc_abi.c       | 142 ++++++++++++++++++++++++++++--
>  3 files changed, 216 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index e5bd3548691f..2a146d884d27 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -112,6 +112,7 @@ struct optee_pcpu {
>   * @optee_pcpu		per_cpu optee instance for per cpu work or NULL
>   * @notif_pcpu_wq	workqueue for per cpu aynchronous notification or NULL
>   * @notif_pcpu_work	work for per cpu asynchronous notification
> + * @domain		interrupt domain registered by OP-TEE driver
>   */
>  struct optee_smc {
>  	optee_invoke_fn *invoke_fn;
> @@ -121,6 +122,7 @@ struct optee_smc {
>  	struct optee_pcpu __percpu *optee_pcpu;
>  	struct workqueue_struct *notif_pcpu_wq;
>  	struct work_struct notif_pcpu_work;
> +	struct irq_domain *domain;
>  };
>  
>  /**
> diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> index 73b5e7760d10..0cf83d5a2931 100644
> --- a/drivers/tee/optee/optee_smc.h
> +++ b/drivers/tee/optee/optee_smc.h
> @@ -226,7 +226,8 @@ struct optee_smc_get_shm_config_result {
>   * a3	Bit[7:0]: Number of parameters needed for RPC to be supplied
>   *		  as the second MSG arg struct for
>   *		  OPTEE_SMC_CALL_WITH_ARG
> - *	Bit[31:8]: Reserved (MBZ)
> + *	Bit[23:8]: The maximum interrupt event notification number
> + *	Bit[31:24]: Reserved (MBZ)
>   * a4-7	Preserved
>   *
>   * Error return register usage:
> @@ -254,6 +255,11 @@ struct optee_smc_get_shm_config_result {
>  #define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF		BIT(5)
>  /* Secure world supports pre-allocating RPC arg struct */
>  #define OPTEE_SMC_SEC_CAP_RPC_ARG		BIT(6)
> +/* Secure world supports interrupt events notification to normal world */
> +#define OPTEE_SMC_SEC_CAP_IT_NOTIF		BIT(7)
> +
> +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_MASK	GENMASK(23, 8)
> +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_SHIFT	8
>  
>  #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES	9
>  #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> @@ -416,6 +422,12 @@ struct optee_smc_disable_shm_cache_result {
>   */
>  #define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF	0
>  
> +/*
> + * Notification that OP-TEE triggers an interrupt event to Linux kernel
> + * for an interrupt consumer.
> + */
> +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT		1
> +
>  #define OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE	17
>  #define OPTEE_SMC_GET_ASYNC_NOTIF_VALUE \
>  	OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE)
> @@ -426,6 +438,70 @@ struct optee_smc_disable_shm_cache_result {
>  /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
>  #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG	19
>  
> +/*
> + * Retrieve the interrupt number of the pending interrupt event notified to
> + * non-secure world since the last call of this function.
> + *
> + * OP-TEE keeps a record of all posted interrupt notification events. When the
> + * async notif interrupt is received by non-secure world, this function should
> + * be called until all pended interrupt events have been retrieved. When an
> + * interrupt event is retrieved it is cleared from the record in secure world.
> + *
> + * It is expected that this function is called from an interrupt handler
> + * in normal world.
> + *
> + * Call requests usage:
> + * a0	SMC Function ID, OPTEE_SMC_GET_IT_NOTIF_VALUE
> + * a1-6	Not used
> + * a7	Hypervisor Client ID register
> + *
> + * Normal return register usage:
> + * a0	OPTEE_SMC_RETURN_OK
> + * a1	IT_NOTIF interrupt identifier value
> + * a2	Bit[0]: OPTEE_SMC_IT_NOTIF_VALID if the value in a1 is
> + *		valid, else 0 if no interrupt event were pending
> + * a2	Bit[1]: OPTEE_SMC_IT_NOTIF_PENDING if another interrupt event
> + *		value is pending, else 0.
> + *	Bit[31:2]: MBZ
> + * a3-7	Preserved
> + *
> + * Not supported return register usage:
> + * a0	OPTEE_SMC_RETURN_ENOTAVAIL
> + * a1-7	Preserved
> + */
> +#define OPTEE_SMC_IT_NOTIF_VALID		BIT(0)
> +#define OPTEE_SMC_IT_NOTIF_PENDING		BIT(1)
> +
> +#define OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE	20
> +#define OPTEE_SMC_GET_IT_NOTIF_VALUE \
> +	OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE)
> +
> +/*
> + * Mask or unmask an interrupt notification event.
> + *
> + * It is expected that this function is called from an interrupt handler
> + * in normal world.
> + *
> + * Call requests usage:
> + * a0	SMC Function ID, OPTEE_SMC_SET_IT_NOTIF_MASK
> + * a1	Interrupt identifier value
> + * a2	Bit[0]: 1 if interrupt event is to be masked, 0 if it is to be unmasked
> + * a2   Bit[31:1] MBZ
> + * a3-6	Not used
> + * a7	Hypervisor Client ID register
> + *
> + * Normal return register usage:
> + * a0	OPTEE_SMC_RETURN_OK
> + * a1-7	Preserved
> + *
> + * Not supported return register usage:
> + * a0	OPTEE_SMC_RETURN_ENOTAVAIL
> + * a1-7	Preserved
> + */
> +#define OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK	21
> +#define OPTEE_SMC_SET_IT_NOTIF_MASK \
> +	OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK)
> +
>  /*
>   * Resume from RPC (for example after processing a foreign interrupt)
>   *
> diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> index 8c2d58d605ac..0360afde119f 100644
> --- a/drivers/tee/optee/smc_abi.c
> +++ b/drivers/tee/optee/smc_abi.c
> @@ -977,6 +977,112 @@ static int optee_smc_stop_async_notif(struct tee_context *ctx)
>   * 5. Asynchronous notification
>   */
>  
> +static u32 get_it_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> +			bool *value_pending)

What value? If this is supposed to return a set of pending bits, just
name the function to reflect that.

Also, at no point do you explain that each PPI is only a mux interrupt
for a bunch of chained interrupts.

> +{
> +	struct arm_smccc_res res;
> +
> +	invoke_fn(OPTEE_SMC_GET_IT_NOTIF_VALUE, 0, 0, 0, 0, 0, 0, 0, &res);
> +
> +	if (res.a0)
> +		return 0;
> +
> +	*value_valid = res.a2 & OPTEE_SMC_IT_NOTIF_VALID;
> +	*value_pending = res.a2 & OPTEE_SMC_IT_NOTIF_PENDING;
> +	return res.a1;
> +}
> +
> +static u32 set_it_mask(optee_invoke_fn *invoke_fn, u32 it_value, bool mask)
> +{
> +	struct arm_smccc_res res;
> +
> +	invoke_fn(OPTEE_SMC_SET_IT_NOTIF_MASK, it_value, mask, 0, 0, 0, 0, 0, &res);
> +
> +	if (res.a0)
> +		return 0;
> +
> +	return res.a1;
> +}
> +
> +static int handle_optee_it(struct optee *optee)
> +{
> +	bool value_valid;
> +	bool value_pending;
> +	u32 it;
> +
> +	do {
> +		struct irq_desc *desc;
> +
> +		it = get_it_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> +		if (!value_valid)
> +			break;
> +
> +		desc = irq_to_desc(irq_find_mapping(optee->smc.domain, it));
> +		if (!desc) {
> +			pr_err("no desc for optee IT:%d\n", it);
> +			return -EIO;
> +		}
> +
> +		handle_simple_irq(desc);
> +

What is this? Please use generic_handle_domain_irq(), like any other
driver. Why is the flow handler handle_simple_irq()? You need to
explain what the signalling is for the secure-provided interrupts.

> +	} while (value_pending);
> +
> +	return 0;
> +}
> +
> +static void optee_it_irq_mask(struct irq_data *d)
> +{
> +	struct optee *optee = d->domain->host_data;
> +
> +	set_it_mask(optee->smc.invoke_fn, d->hwirq, true);
> +}
> +
> +static void optee_it_irq_unmask(struct irq_data *d)
> +{
> +	struct optee *optee = d->domain->host_data;
> +
> +	set_it_mask(optee->smc.invoke_fn, d->hwirq, false);
> +}
> +
> +static struct irq_chip optee_it_irq_chip = {
> +	.name = "optee-it",
> +	.irq_disable = optee_it_irq_mask,
> +	.irq_enable = optee_it_irq_unmask,
> +	.flags = IRQCHIP_SKIP_SET_WAKE,

Is it a mask or a disable? These are different beasts.

> +};
> +
> +static int optee_it_alloc(struct irq_domain *d, unsigned int virq,
> +			  unsigned int nr_irqs, void *data)
> +{
> +	struct irq_fwspec *fwspec = data;
> +	irq_hw_number_t hwirq;
> +
> +	hwirq = fwspec->param[0];
> +
> +	irq_domain_set_hwirq_and_chip(d, virq, hwirq, &optee_it_irq_chip, d->host_data);
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops optee_it_irq_domain_ops = {
> +	.alloc = optee_it_alloc,
> +	.free = irq_domain_free_irqs_common,
> +};
> +
> +static int optee_irq_domain_init(struct platform_device *pdev, struct optee *optee, u_int max_it)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +
> +	optee->smc.domain = irq_domain_add_linear(np, max_it, &optee_it_irq_domain_ops, optee);
> +	if (!optee->smc.domain) {
> +		dev_err(dev, "Unable to add irq domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
>  static u32 get_async_notif_value(optee_invoke_fn *invoke_fn, bool *value_valid,
>  				 bool *value_pending)
>  {
> @@ -1008,13 +1114,15 @@ static irqreturn_t notif_irq_handler(int irq, void *dev_id)
>  	}
>  
>  	do {
> -		value = get_async_notif_value(optee->smc.invoke_fn,
> -					      &value_valid, &value_pending);
> +		value = get_async_notif_value(optee->smc.invoke_fn, &value_valid, &value_pending);
>  		if (!value_valid)
>  			break;
>  
>  		if (value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF)
>  			do_bottom_half = true;
> +		else if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF &&
> +			 value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT)
> +			handle_optee_it(optee);

NAK. This isn't how we deal with chained interrupts. Definitely not in
an interrupt handler.

	M.
  

Hello Marc,

Thanks for the review.


On Fri, 13 Jan 2023 at 10:22, Marc Zyngier <maz@kernel.org> wrote:
>
> On Thu, 12 Jan 2023 14:54:24 +0000,
> Etienne Carriere <etienne.carriere@linaro.org> wrote:
> >
> > Adds an irq chip in optee driver to generate interrupts from OP-TEE
> > notified interrupt events based on optee async notification. Upon such
> > notification, optee driver invokes OP-TEE to query a pending interrupt
> > event. If an interrupt notification is pending the invocation return
> > OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT and optee driver can get the pending
> > interrupt number with SMC function ID OPTEE_SMC_FUNCID_GET_IT_VALUE.
> >
> > SMC function ID OPTEE_SMC_FUNCID_SET_IT_MASK allows Linux to mask/unmask
> > an interrupt notification services.
> >
> > The optee irq_chip if flagged IRQCHIP_SKIP_SET_WAKE to skip set_wake
> > as optee interrupt notifications doesn't support the set_wake option.
> > In case a device is using the optee irq and is marked as wakeup source,
> > this result in an "Unbalanced IRQ xx wake disable" backtrace, since:
> > - in irq_set_irq_wake(ON), wake_depth gets incremented, then reset due to
> >   set_irq_wake_real() returns an error (irq_set_wake() isn't implemented)
> > - in irq_set_irq_wake(OFF), wake_depth is always 0, hence the warning
>
> Is this relevant information?

The description is maybe too specific to the setup used for this feature.
I'll rephrase that, unless IRQCHIP_SKIP_SET_WAKE flag is not relevant here.

>
> >
> > Co-developed-by: Pascal Paillet <p.paillet@foss.st.com>
> > Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
> > Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> > Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> > ---
> >  drivers/tee/optee/optee_private.h |   2 +
> >  drivers/tee/optee/optee_smc.h     |  78 +++++++++++++++-
> >  drivers/tee/optee/smc_abi.c       | 142 ++++++++++++++++++++++++++++--
> >  3 files changed, 216 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > index e5bd3548691f..2a146d884d27 100644
> > --- a/drivers/tee/optee/optee_private.h
> > +++ b/drivers/tee/optee/optee_private.h
> > @@ -112,6 +112,7 @@ struct optee_pcpu {
> >   * @optee_pcpu               per_cpu optee instance for per cpu work or NULL
> >   * @notif_pcpu_wq    workqueue for per cpu aynchronous notification or NULL
> >   * @notif_pcpu_work  work for per cpu asynchronous notification
> > + * @domain           interrupt domain registered by OP-TEE driver
> >   */
> >  struct optee_smc {
> >       optee_invoke_fn *invoke_fn;
> > @@ -121,6 +122,7 @@ struct optee_smc {
> >       struct optee_pcpu __percpu *optee_pcpu;
> >       struct workqueue_struct *notif_pcpu_wq;
> >       struct work_struct notif_pcpu_work;
> > +     struct irq_domain *domain;
> >  };
> >
> >  /**
> > diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> > index 73b5e7760d10..0cf83d5a2931 100644
> > --- a/drivers/tee/optee/optee_smc.h
> > +++ b/drivers/tee/optee/optee_smc.h
> > @@ -226,7 +226,8 @@ struct optee_smc_get_shm_config_result {
> >   * a3        Bit[7:0]: Number of parameters needed for RPC to be supplied
> >   *             as the second MSG arg struct for
> >   *             OPTEE_SMC_CALL_WITH_ARG
> > - *   Bit[31:8]: Reserved (MBZ)
> > + *   Bit[23:8]: The maximum interrupt event notification number
> > + *   Bit[31:24]: Reserved (MBZ)
> >   * a4-7      Preserved
> >   *
> >   * Error return register usage:
> > @@ -254,6 +255,11 @@ struct optee_smc_get_shm_config_result {
> >  #define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF                BIT(5)
> >  /* Secure world supports pre-allocating RPC arg struct */
> >  #define OPTEE_SMC_SEC_CAP_RPC_ARG            BIT(6)
> > +/* Secure world supports interrupt events notification to normal world */
> > +#define OPTEE_SMC_SEC_CAP_IT_NOTIF           BIT(7)
> > +
> > +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_MASK  GENMASK(23, 8)
> > +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_SHIFT 8
> >
> >  #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES       9
> >  #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> > @@ -416,6 +422,12 @@ struct optee_smc_disable_shm_cache_result {
> >   */
> >  #define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF   0
> >
> > +/*
> > + * Notification that OP-TEE triggers an interrupt event to Linux kernel
> > + * for an interrupt consumer.
> > + */
> > +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT            1
> > +
> >  #define OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE       17
> >  #define OPTEE_SMC_GET_ASYNC_NOTIF_VALUE \
> >       OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE)
> > @@ -426,6 +438,70 @@ struct optee_smc_disable_shm_cache_result {
> >  /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
> >  #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG  19
> >
> > +/*
> > + * Retrieve the interrupt number of the pending interrupt event notified to
> > + * non-secure world since the last call of this function.
> > + *
> > + * OP-TEE keeps a record of all posted interrupt notification events. When the
> > + * async notif interrupt is received by non-secure world, this function should
> > + * be called until all pended interrupt events have been retrieved. When an
> > + * interrupt event is retrieved it is cleared from the record in secure world.
> > + *
> > + * It is expected that this function is called from an interrupt handler
> > + * in normal world.
> > + *
> > + * Call requests usage:
> > + * a0        SMC Function ID, OPTEE_SMC_GET_IT_NOTIF_VALUE
> > + * a1-6      Not used
> > + * a7        Hypervisor Client ID register
> > + *
> > + * Normal return register usage:
> > + * a0        OPTEE_SMC_RETURN_OK
> > + * a1        IT_NOTIF interrupt identifier value
> > + * a2        Bit[0]: OPTEE_SMC_IT_NOTIF_VALID if the value in a1 is
> > + *           valid, else 0 if no interrupt event were pending
> > + * a2        Bit[1]: OPTEE_SMC_IT_NOTIF_PENDING if another interrupt event
> > + *           value is pending, else 0.
> > + *   Bit[31:2]: MBZ
> > + * a3-7      Preserved
> > + *
> > + * Not supported return register usage:
> > + * a0        OPTEE_SMC_RETURN_ENOTAVAIL
> > + * a1-7      Preserved
> > + */
> > +#define OPTEE_SMC_IT_NOTIF_VALID             BIT(0)
> > +#define OPTEE_SMC_IT_NOTIF_PENDING           BIT(1)
> > +
> > +#define OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE  20
> > +#define OPTEE_SMC_GET_IT_NOTIF_VALUE \
> > +     OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE)
> > +
> > +/*
> > + * Mask or unmask an interrupt notification event.
> > + *
> > + * It is expected that this function is called from an interrupt handler
> > + * in normal world.
> > + *
> > + * Call requests usage:
> > + * a0        SMC Function ID, OPTEE_SMC_SET_IT_NOTIF_MASK
> > + * a1        Interrupt identifier value
> > + * a2        Bit[0]: 1 if interrupt event is to be masked, 0 if it is to be unmasked
> > + * a2   Bit[31:1] MBZ
> > + * a3-6      Not used
> > + * a7        Hypervisor Client ID register
> > + *
> > + * Normal return register usage:
> > + * a0        OPTEE_SMC_RETURN_OK
> > + * a1-7      Preserved
> > + *
> > + * Not supdealed ported return register usage:
> > + * a0        OPTEE_SMC_RETURN_ENOTAVAIL
> > + * a1-7      Preserved
> > + */
> > +#define OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK   21
> > +#define OPTEE_SMC_SET_IT_NOTIF_MASK \
> > +     OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK)
> > +
> >  /*
> >   * Resume from RPC (for example after processing a foreign interrupt)
> >   *
> > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> > index 8c2d58d605ac..0360afde119f 100644
> > --- a/drivers/tee/optee/smc_abi.c
> > +++ b/drivers/tee/optee/smc_abi.c
> > @@ -977,6 +977,112 @@ static int optee_smc_stop_async_notif(struct tee_context *ctx)
> >   * 5. Asynchronous notification
> >   */
> >
> > +static u32 get_it_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> > +                     bool *value_pending)
>
> What value? If this is supposed to return a set of pending bits, just
> name the function to reflect that.

Communication between Linux kernel and OP-TEE is this case is rather
basic here, no shared memory used, only few CPU registers can be used
to shared information. So Linux invokes OP-TEE for each pending optee
interrupt event: each invocation returns a interrupt event number (an
integer value) and a status whether another interrupt event is pending
and shall be retrieved invoking OP-TEE again. In case Linux invoke
OP-TEE for a pending interrupt and none is pending, a last status is
also provided: 'value_valid'.

I could maybe change the prototype to something like:
static u32 get_pending_it_number(optee_invoke_fn *invoke_fn, bool
*it_number_valid, bool *more_pending_it)

>
> Also, at no point do you explain that each PPI is only a mux interrupt
> for a bunch of chained interrupts.

Sorry, I don't understand your question.
The "it notif" feature proposed in this change is not straight related a PPI.
Previous patch in this series is indeed related to PPI: it propose
optee driver can use a single PPI instead of a signle SPI for the
OP-TEE "asyn notification" feature.
This change allows to mux interrupts events (from OP-TEE to Linux
optee driver) over "OP-TEE async notif" means, which is using a single
SPI or PPI.
Maybe I should have submitted both changes separately :(

>
> > +{
> > +     struct arm_smccc_res res;
> > +
> > +     invoke_fn(OPTEE_SMC_GET_IT_NOTIF_VALUE, 0, 0, 0, 0, 0, 0, 0, &res);
> > +
> > +     if (res.a0)
> > +             return 0;
> > +
> > +     *value_valid = res.a2 & OPTEE_SMC_IT_NOTIF_VALID;
> > +     *value_pending = res.a2 & OPTEE_SMC_IT_NOTIF_PENDING;
> > +     return res.a1;
> > +}
> > +
> > +static u32 set_it_mask(optee_invoke_fn *invoke_fn, u32 it_value, bool mask)
> > +{
> > +     struct arm_smccc_res res;
> > +
> > +     invoke_fn(OPTEE_SMC_SET_IT_NOTIF_MASK, it_value, mask, 0, 0, 0, 0, 0, &res);
> > +
> > +     if (res.a0)
> > +             return 0;
> > +
> > +     return res.a1;
> > +}
> > +
> > +static int handle_optee_it(struct optee *optee)
> > +{
> > +     bool value_valid;
> > +     bool value_pending;
> > +     u32 it;
> > +
> > +     do {
> > +             struct irq_desc *desc;
> > +
> > +             it = get_it_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> > +             if (!value_valid)
> > +                     break;
> > +
> > +             desc = irq_to_desc(irq_find_mapping(optee->smc.domain, it));
> > +             if (!desc) {
> > +                     pr_err("no desc for optee IT:%d\n", it);
> > +                     return -EIO;
> > +             }
> > +
> > +             handle_simple_irq(desc);
> > +
>
> What is this? Please use generic_handle_domain_irq(), like any other
> driver. Why is the flow handler handle_simple_irq()? You need to
> explain what the signalling is for the secure-provided interrupts.

My fault. I thought handle_simple_irq() would better apply here since
its description:
 * Simple interrupts are either sent from a demultiplexing interrupt
 * handler or come from hardware, where no interrupt hardware control
 * is necessary.

OP-TEE secure world has already dealt with the HW interrupt resources
(ack/etc...) before it notifies Linux kernel of the event.

>
> > +     } while (value_pending);
> > +
> > +     return 0;
> > +}
> > +
> > +static void optee_it_irq_mask(struct irq_data *d)
> > +{
> > +     struct optee *optee = d->domain->host_data;
> > +
> > +     set_it_mask(optee->smc.invoke_fn, d->hwirq, true);
> > +}
> > +
> > +static void optee_it_irq_unmask(struct irq_data *d)
> > +{
> > +     struct optee *optee = d->domain->host_data;
> > +
> > +     set_it_mask(optee->smc.invoke_fn, d->hwirq, false);
> > +}
> > +
> > +static struct irq_chip optee_it_irq_chip = {
> > +     .name = "optee-it",
> > +     .irq_disable = optee_it_irq_mask,
> > +     .irq_enable = optee_it_irq_unmask,
> > +     .flags = IRQCHIP_SKIP_SET_WAKE,
>
> Is it a mask or a disable? These are different beasts.

Indeed, thanks for catching that. I think we need to 4
(enable/disable/mask/unmask).
I'll fix.

>
> > +};
> > +
> > +static int optee_it_alloc(struct irq_domain *d, unsigned int virq,
> > +                       unsigned int nr_irqs, void *data)
> > +{
> > +     struct irq_fwspec *fwspec = data;
> > +     irq_hw_number_t hwirq;
> > +
> > +     hwirq = fwspec->param[0];
> > +
> > +     irq_domain_set_hwirq_and_chip(d, virq, hwirq, &optee_it_irq_chip, d->host_data);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct irq_domain_ops optee_it_irq_domain_ops = {
> > +     .alloc = optee_it_alloc,
> > +     .free = irq_domain_free_irqs_common,
> > +};
> > +
> > +static int optee_irq_domain_init(struct platform_device *pdev, struct optee *optee, u_int max_it)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct device_node *np = dev->of_node;
> > +
> > +     optee->smc.domain = irq_domain_add_linear(np, max_it, &optee_it_irq_domain_ops, optee);
> > +     if (!optee->smc.domain) {
> > +             dev_err(dev, "Unable to add irq domain\n");
> > +             return -ENOMEM;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> >  static u32 get_async_notif_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> >                                bool *value_pending)
> >  {
> > @@ -1008,13 +1114,15 @@ static irqreturn_t notif_irq_handler(int irq, void *dev_id)
> >       }
> >
> >       do {
> > -             value = get_async_notif_value(optee->smc.invoke_fn,
> > -                                           &value_valid, &value_pending);
> > +             value = get_async_notif_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> >               if (!value_valid)
> >                       break;
> >
> >               if (value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF)
> >                       do_bottom_half = true;
> > +             else if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF &&
> > +                      value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT)
> > +                     handle_optee_it(optee);
>
> NAK. This isn't how we deal with chained interrupts. Definitely not in
> an interrupt handler.

My apologies, what is wrong in this sequence. My expectations are:
1- Something happens on OP-TEE secure side that should be reported to
Linux as a software interrupt event
2- OP-TEE (secure world) raises an HW interrupt to notify Linux optee
driver that event(s) are pending
3- optee driver threade_irq handler is called and asks OP-TEE which
are the pending events. This is done event per event until all pending
event are consumed.
4- Each each pending events:
4a- (existing code) wake or spawn a thread when a pending event is
related to a threaded context execution,
4b- (this patch) call the interrupt handler of the optee interrupt
consumers when event is related to an interrupt event signalling,

Regards,
Etienne

>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.
  

On Fri, 13 Jan 2023 15:27:22 +0000,
Etienne Carriere <etienne.carriere@linaro.org> wrote:
> 
> Hello Marc,
> 
> Thanks for the review.
> 
> 
> On Fri, 13 Jan 2023 at 10:22, Marc Zyngier <maz@kernel.org> wrote:
> >
> > On Thu, 12 Jan 2023 14:54:24 +0000,
> > Etienne Carriere <etienne.carriere@linaro.org> wrote:
> > >
> > > Adds an irq chip in optee driver to generate interrupts from OP-TEE
> > > notified interrupt events based on optee async notification. Upon such
> > > notification, optee driver invokes OP-TEE to query a pending interrupt
> > > event. If an interrupt notification is pending the invocation return
> > > OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT and optee driver can get the pending
> > > interrupt number with SMC function ID OPTEE_SMC_FUNCID_GET_IT_VALUE.
> > >
> > > SMC function ID OPTEE_SMC_FUNCID_SET_IT_MASK allows Linux to mask/unmask
> > > an interrupt notification services.
> > >
> > > The optee irq_chip if flagged IRQCHIP_SKIP_SET_WAKE to skip set_wake
> > > as optee interrupt notifications doesn't support the set_wake option.
> > > In case a device is using the optee irq and is marked as wakeup source,
> > > this result in an "Unbalanced IRQ xx wake disable" backtrace, since:
> > > - in irq_set_irq_wake(ON), wake_depth gets incremented, then reset due to
> > >   set_irq_wake_real() returns an error (irq_set_wake() isn't implemented)
> > > - in irq_set_irq_wake(OFF), wake_depth is always 0, hence the warning
> >
> > Is this relevant information?
> 
> The description is maybe too specific to the setup used for this feature.
> I'll rephrase that, unless IRQCHIP_SKIP_SET_WAKE flag is not relevant here.

IRQCHIP_SKIP_SET_FLAG is used when the irqchip doesn't provide any
wake-up mechanism, but also isn't *denying* its use (there is a
separate way to wake up from such an interrupt). I don't think you
need to document that something goes wrong when you're doing something
wrong.

> >
> > >
> > > Co-developed-by: Pascal Paillet <p.paillet@foss.st.com>
> > > Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
> > > Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> > > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> > > Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> > > ---
> > >  drivers/tee/optee/optee_private.h |   2 +
> > >  drivers/tee/optee/optee_smc.h     |  78 +++++++++++++++-
> > >  drivers/tee/optee/smc_abi.c       | 142 ++++++++++++++++++++++++++++--
> > >  3 files changed, 216 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > > index e5bd3548691f..2a146d884d27 100644
> > > --- a/drivers/tee/optee/optee_private.h
> > > +++ b/drivers/tee/optee/optee_private.h
> > > @@ -112,6 +112,7 @@ struct optee_pcpu {
> > >   * @optee_pcpu               per_cpu optee instance for per cpu work or NULL
> > >   * @notif_pcpu_wq    workqueue for per cpu aynchronous notification or NULL
> > >   * @notif_pcpu_work  work for per cpu asynchronous notification
> > > + * @domain           interrupt domain registered by OP-TEE driver
> > >   */
> > >  struct optee_smc {
> > >       optee_invoke_fn *invoke_fn;
> > > @@ -121,6 +122,7 @@ struct optee_smc {
> > >       struct optee_pcpu __percpu *optee_pcpu;
> > >       struct workqueue_struct *notif_pcpu_wq;
> > >       struct work_struct notif_pcpu_work;
> > > +     struct irq_domain *domain;
> > >  };
> > >
> > >  /**
> > > diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> > > index 73b5e7760d10..0cf83d5a2931 100644
> > > --- a/drivers/tee/optee/optee_smc.h
> > > +++ b/drivers/tee/optee/optee_smc.h
> > > @@ -226,7 +226,8 @@ struct optee_smc_get_shm_config_result {
> > >   * a3        Bit[7:0]: Number of parameters needed for RPC to be supplied
> > >   *             as the second MSG arg struct for
> > >   *             OPTEE_SMC_CALL_WITH_ARG
> > > - *   Bit[31:8]: Reserved (MBZ)
> > > + *   Bit[23:8]: The maximum interrupt event notification number
> > > + *   Bit[31:24]: Reserved (MBZ)
> > >   * a4-7      Preserved
> > >   *
> > >   * Error return register usage:
> > > @@ -254,6 +255,11 @@ struct optee_smc_get_shm_config_result {
> > >  #define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF                BIT(5)
> > >  /* Secure world supports pre-allocating RPC arg struct */
> > >  #define OPTEE_SMC_SEC_CAP_RPC_ARG            BIT(6)
> > > +/* Secure world supports interrupt events notification to normal world */
> > > +#define OPTEE_SMC_SEC_CAP_IT_NOTIF           BIT(7)
> > > +
> > > +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_MASK  GENMASK(23, 8)
> > > +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_SHIFT 8
> > >
> > >  #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES       9
> > >  #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> > > @@ -416,6 +422,12 @@ struct optee_smc_disable_shm_cache_result {
> > >   */
> > >  #define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF   0
> > >
> > > +/*
> > > + * Notification that OP-TEE triggers an interrupt event to Linux kernel
> > > + * for an interrupt consumer.
> > > + */
> > > +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT            1
> > > +
> > >  #define OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE       17
> > >  #define OPTEE_SMC_GET_ASYNC_NOTIF_VALUE \
> > >       OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE)
> > > @@ -426,6 +438,70 @@ struct optee_smc_disable_shm_cache_result {
> > >  /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
> > >  #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG  19
> > >
> > > +/*
> > > + * Retrieve the interrupt number of the pending interrupt event notified to
> > > + * non-secure world since the last call of this function.
> > > + *
> > > + * OP-TEE keeps a record of all posted interrupt notification events. When the
> > > + * async notif interrupt is received by non-secure world, this function should
> > > + * be called until all pended interrupt events have been retrieved. When an
> > > + * interrupt event is retrieved it is cleared from the record in secure world.
> > > + *
> > > + * It is expected that this function is called from an interrupt handler
> > > + * in normal world.
> > > + *
> > > + * Call requests usage:
> > > + * a0        SMC Function ID, OPTEE_SMC_GET_IT_NOTIF_VALUE
> > > + * a1-6      Not used
> > > + * a7        Hypervisor Client ID register
> > > + *
> > > + * Normal return register usage:
> > > + * a0        OPTEE_SMC_RETURN_OK
> > > + * a1        IT_NOTIF interrupt identifier value
> > > + * a2        Bit[0]: OPTEE_SMC_IT_NOTIF_VALID if the value in a1 is
> > > + *           valid, else 0 if no interrupt event were pending
> > > + * a2        Bit[1]: OPTEE_SMC_IT_NOTIF_PENDING if another interrupt event
> > > + *           value is pending, else 0.
> > > + *   Bit[31:2]: MBZ
> > > + * a3-7      Preserved
> > > + *
> > > + * Not supported return register usage:
> > > + * a0        OPTEE_SMC_RETURN_ENOTAVAIL
> > > + * a1-7      Preserved
> > > + */
> > > +#define OPTEE_SMC_IT_NOTIF_VALID             BIT(0)
> > > +#define OPTEE_SMC_IT_NOTIF_PENDING           BIT(1)
> > > +
> > > +#define OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE  20
> > > +#define OPTEE_SMC_GET_IT_NOTIF_VALUE \
> > > +     OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE)
> > > +
> > > +/*
> > > + * Mask or unmask an interrupt notification event.
> > > + *
> > > + * It is expected that this function is called from an interrupt handler
> > > + * in normal world.
> > > + *
> > > + * Call requests usage:
> > > + * a0        SMC Function ID, OPTEE_SMC_SET_IT_NOTIF_MASK
> > > + * a1        Interrupt identifier value
> > > + * a2        Bit[0]: 1 if interrupt event is to be masked, 0 if it is to be unmasked
> > > + * a2   Bit[31:1] MBZ
> > > + * a3-6      Not used
> > > + * a7        Hypervisor Client ID register
> > > + *
> > > + * Normal return register usage:
> > > + * a0        OPTEE_SMC_RETURN_OK
> > > + * a1-7      Preserved
> > > + *
> > > + * Not supdealed ported return register usage:
> > > + * a0        OPTEE_SMC_RETURN_ENOTAVAIL
> > > + * a1-7      Preserved
> > > + */
> > > +#define OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK   21
> > > +#define OPTEE_SMC_SET_IT_NOTIF_MASK \
> > > +     OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK)
> > > +
> > >  /*
> > >   * Resume from RPC (for example after processing a foreign interrupt)
> > >   *
> > > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> > > index 8c2d58d605ac..0360afde119f 100644
> > > --- a/drivers/tee/optee/smc_abi.c
> > > +++ b/drivers/tee/optee/smc_abi.c
> > > @@ -977,6 +977,112 @@ static int optee_smc_stop_async_notif(struct tee_context *ctx)
> > >   * 5. Asynchronous notification
> > >   */
> > >
> > > +static u32 get_it_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> > > +                     bool *value_pending)
> >
> > What value? If this is supposed to return a set of pending bits, just
> > name the function to reflect that.
> 
> Communication between Linux kernel and OP-TEE is this case is rather
> basic here, no shared memory used, only few CPU registers can be used
> to shared information. So Linux invokes OP-TEE for each pending optee
> interrupt event: each invocation returns a interrupt event number (an
> integer value) and a status whether another interrupt event is pending
> and shall be retrieved invoking OP-TEE again. In case Linux invoke
> OP-TEE for a pending interrupt and none is pending, a last status is
> also provided: 'value_valid'.
> 
> I could maybe change the prototype to something like:
> static u32 get_pending_it_number(optee_invoke_fn *invoke_fn, bool
> *it_number_valid, bool *more_pending_it)

What does 'it' mean? Interrupt? Spell it out. Really, this should read as:

	get_pending_irq()


> 
> >
> > Also, at no point do you explain that each PPI is only a mux interrupt
> > for a bunch of chained interrupts.
> 
> Sorry, I don't understand your question.
> The "it notif" feature proposed in this change is not straight related a PPI.
> Previous patch in this series is indeed related to PPI: it propose
> optee driver can use a single PPI instead of a signle SPI for the
> OP-TEE "asyn notification" feature.
> This change allows to mux interrupts events (from OP-TEE to Linux
> optee driver) over "OP-TEE async notif" means, which is using a single
> SPI or PPI.
> Maybe I should have submitted both changes separately :(

Surely a less cryptic explaination would have helped.

> 
> >
> > > +{
> > > +     struct arm_smccc_res res;
> > > +
> > > +     invoke_fn(OPTEE_SMC_GET_IT_NOTIF_VALUE, 0, 0, 0, 0, 0, 0, 0, &res);
> > > +
> > > +     if (res.a0)
> > > +             return 0;
> > > +
> > > +     *value_valid = res.a2 & OPTEE_SMC_IT_NOTIF_VALID;
> > > +     *value_pending = res.a2 & OPTEE_SMC_IT_NOTIF_PENDING;
> > > +     return res.a1;
> > > +}
> > > +
> > > +static u32 set_it_mask(optee_invoke_fn *invoke_fn, u32 it_value, bool mask)
> > > +{
> > > +     struct arm_smccc_res res;
> > > +
> > > +     invoke_fn(OPTEE_SMC_SET_IT_NOTIF_MASK, it_value, mask, 0, 0, 0, 0, 0, &res);
> > > +
> > > +     if (res.a0)
> > > +             return 0;
> > > +
> > > +     return res.a1;
> > > +}
> > > +
> > > +static int handle_optee_it(struct optee *optee)
> > > +{
> > > +     bool value_valid;
> > > +     bool value_pending;
> > > +     u32 it;
> > > +
> > > +     do {
> > > +             struct irq_desc *desc;
> > > +
> > > +             it = get_it_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> > > +             if (!value_valid)
> > > +                     break;
> > > +
> > > +             desc = irq_to_desc(irq_find_mapping(optee->smc.domain, it));
> > > +             if (!desc) {
> > > +                     pr_err("no desc for optee IT:%d\n", it);
> > > +                     return -EIO;
> > > +             }
> > > +
> > > +             handle_simple_irq(desc);
> > > +
> >
> > What is this? Please use generic_handle_domain_irq(), like any other
> > driver. Why is the flow handler handle_simple_irq()? You need to
> > explain what the signalling is for the secure-provided interrupts.
> 
> My fault. I thought handle_simple_irq() would better apply here since
> its description:
>  * Simple interrupts are either sent from a demultiplexing interrupt
>  * handler or come from hardware, where no interrupt hardware control
>  * is necessary.

Why isn't masking necessary? What is the signalling between OPTEE and
NS? Does the "get_it_value" function *consume* the pending bits? You
need to answer and document all of that, and only then pick the flow
that matches these requirements.

> 
> OP-TEE secure world has already dealt with the HW interrupt resources
> (ack/etc...) before it notifies Linux kernel of the event.
> 
> >
> > > +     } while (value_pending);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > > +static void optee_it_irq_mask(struct irq_data *d)
> > > +{
> > > +     struct optee *optee = d->domain->host_data;
> > > +
> > > +     set_it_mask(optee->smc.invoke_fn, d->hwirq, true);
> > > +}
> > > +
> > > +static void optee_it_irq_unmask(struct irq_data *d)
> > > +{
> > > +     struct optee *optee = d->domain->host_data;
> > > +
> > > +     set_it_mask(optee->smc.invoke_fn, d->hwirq, false);
> > > +}
> > > +
> > > +static struct irq_chip optee_it_irq_chip = {
> > > +     .name = "optee-it",
> > > +     .irq_disable = optee_it_irq_mask,
> > > +     .irq_enable = optee_it_irq_unmask,
> > > +     .flags = IRQCHIP_SKIP_SET_WAKE,
> >
> > Is it a mask or a disable? These are different beasts.
> 
> Indeed, thanks for catching that. I think we need to 4
> (enable/disable/mask/unmask).
> I'll fix.

What does enable do differently from unmask?

> 
> >
> > > +};
> > > +
> > > +static int optee_it_alloc(struct irq_domain *d, unsigned int virq,
> > > +                       unsigned int nr_irqs, void *data)
> > > +{
> > > +     struct irq_fwspec *fwspec = data;
> > > +     irq_hw_number_t hwirq;
> > > +
> > > +     hwirq = fwspec->param[0];
> > > +
> > > +     irq_domain_set_hwirq_and_chip(d, virq, hwirq, &optee_it_irq_chip, d->host_data);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > > +static const struct irq_domain_ops optee_it_irq_domain_ops = {
> > > +     .alloc = optee_it_alloc,
> > > +     .free = irq_domain_free_irqs_common,
> > > +};
> > > +
> > > +static int optee_irq_domain_init(struct platform_device *pdev, struct optee *optee, u_int max_it)
> > > +{
> > > +     struct device *dev = &pdev->dev;
> > > +     struct device_node *np = dev->of_node;
> > > +
> > > +     optee->smc.domain = irq_domain_add_linear(np, max_it, &optee_it_irq_domain_ops, optee);
> > > +     if (!optee->smc.domain) {
> > > +             dev_err(dev, "Unable to add irq domain\n");
> > > +             return -ENOMEM;
> > > +     }
> > > +
> > > +     return 0;
> > > +}
> > > +
> > >  static u32 get_async_notif_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> > >                                bool *value_pending)
> > >  {
> > > @@ -1008,13 +1114,15 @@ static irqreturn_t notif_irq_handler(int irq, void *dev_id)
> > >       }
> > >
> > >       do {
> > > -             value = get_async_notif_value(optee->smc.invoke_fn,
> > > -                                           &value_valid, &value_pending);
> > > +             value = get_async_notif_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> > >               if (!value_valid)
> > >                       break;
> > >
> > >               if (value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF)
> > >                       do_bottom_half = true;
> > > +             else if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF &&
> > > +                      value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT)
> > > +                     handle_optee_it(optee);
> >
> > NAK. This isn't how we deal with chained interrupts. Definitely not in
> > an interrupt handler.
> 
> My apologies, what is wrong in this sequence. My expectations are:
> 1- Something happens on OP-TEE secure side that should be reported to
> Linux as a software interrupt event

Why? There is nothing Linux-specific in OPTEE. Why should OPTEE be
prescriptive of the way this is handled?

> 2- OP-TEE (secure world) raises an HW interrupt to notify Linux optee
> driver that event(s) are pending
> 3- optee driver threade_irq handler is called and asks OP-TEE which
> are the pending events. This is done event per event until all pending
> event are consumed.

Why is this done in a thread? I'd expect the *handlers* to be
threaded, but not the irqchip part of it (which is crucially missing
here).

	M.
  

On Sun, 15 Jan 2023 at 11:14, Marc Zyngier <maz@kernel.org> wrote:
>
> On Fri, 13 Jan 2023 15:27:22 +0000,
> Etienne Carriere <etienne.carriere@linaro.org> wrote:
> >
> > Hello Marc,
> >
> > Thanks for the review.
> >
> >
> > On Fri, 13 Jan 2023 at 10:22, Marc Zyngier <maz@kernel.org> wrote:
> > >
> > > On Thu, 12 Jan 2023 14:54:24 +0000,
> > > Etienne Carriere <etienne.carriere@linaro.org> wrote:
> > > >
> > > > Adds an irq chip in optee driver to generate interrupts from OP-TEE
> > > > notified interrupt events based on optee async notification. Upon such
> > > > notification, optee driver invokes OP-TEE to query a pending interrupt
> > > > event. If an interrupt notification is pending the invocation return
> > > > OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT and optee driver can get the pending
> > > > interrupt number with SMC function ID OPTEE_SMC_FUNCID_GET_IT_VALUE.
> > > >
> > > > SMC function ID OPTEE_SMC_FUNCID_SET_IT_MASK allows Linux to mask/unmask
> > > > an interrupt notification services.
> > > >
> > > > The optee irq_chip if flagged IRQCHIP_SKIP_SET_WAKE to skip set_wake
> > > > as optee interrupt notifications doesn't support the set_wake option.
> > > > In case a device is using the optee irq and is marked as wakeup source,
> > > > this result in an "Unbalanced IRQ xx wake disable" backtrace, since:
> > > > - in irq_set_irq_wake(ON), wake_depth gets incremented, then reset due to
> > > >   set_irq_wake_real() returns an error (irq_set_wake() isn't implemented)
> > > > - in irq_set_irq_wake(OFF), wake_depth is always 0, hence the warning
> > >
> > > Is this relevant information?
> >
> > The description is maybe too specific to the setup used for this feature.
> > I'll rephrase that, unless IRQCHIP_SKIP_SET_WAKE flag is not relevant here.
>
> IRQCHIP_SKIP_SET_FLAG is used when the irqchip doesn't provide any
> wake-up mechanism, but also isn't *denying* its use (there is a
> separate way to wake up from such an interrupt). I don't think you
> need to document that something goes wrong when you're doing something
> wrong.

:)  fair.

>
> > >
> > > >
> > > > Co-developed-by: Pascal Paillet <p.paillet@foss.st.com>
> > > > Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
> > > > Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> > > > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> > > > Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> > > > ---
> > > >  drivers/tee/optee/optee_private.h |   2 +
> > > >  drivers/tee/optee/optee_smc.h     |  78 +++++++++++++++-
> > > >  drivers/tee/optee/smc_abi.c       | 142 ++++++++++++++++++++++++++++--
> > > >  3 files changed, 216 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > > > index e5bd3548691f..2a146d884d27 100644
> > > > --- a/drivers/tee/optee/optee_private.h
> > > > +++ b/drivers/tee/optee/optee_private.h
> > > > @@ -112,6 +112,7 @@ struct optee_pcpu {
> > > >   * @optee_pcpu               per_cpu optee instance for per cpu work or NULL
> > > >   * @notif_pcpu_wq    workqueue for per cpu aynchronous notification or NULL
> > > >   * @notif_pcpu_work  work for per cpu asynchronous notification
> > > > + * @domain           interrupt domain registered by OP-TEE driver
> > > >   */
> > > >  struct optee_smc {
> > > >       optee_invoke_fn *invoke_fn;
> > > > @@ -121,6 +122,7 @@ struct optee_smc {
> > > >       struct optee_pcpu __percpu *optee_pcpu;
> > > >       struct workqueue_struct *notif_pcpu_wq;
> > > >       struct work_struct notif_pcpu_work;
> > > > +     struct irq_domain *domain;
> > > >  };
> > > >
> > > >  /**
> > > > diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> > > > index 73b5e7760d10..0cf83d5a2931 100644
> > > > --- a/drivers/tee/optee/optee_smc.h
> > > > +++ b/drivers/tee/optee/optee_smc.h
> > > > @@ -226,7 +226,8 @@ struct optee_smc_get_shm_config_result {
> > > >   * a3        Bit[7:0]: Number of parameters needed for RPC to be supplied
> > > >   *             as the second MSG arg struct for
> > > >   *             OPTEE_SMC_CALL_WITH_ARG
> > > > - *   Bit[31:8]: Reserved (MBZ)
> > > > + *   Bit[23:8]: The maximum interrupt event notification number
> > > > + *   Bit[31:24]: Reserved (MBZ)
> > > >   * a4-7      Preserved
> > > >   *
> > > >   * Error return register usage:
> > > > @@ -254,6 +255,11 @@ struct optee_smc_get_shm_config_result {
> > > >  #define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF                BIT(5)
> > > >  /* Secure world supports pre-allocating RPC arg struct */
> > > >  #define OPTEE_SMC_SEC_CAP_RPC_ARG            BIT(6)
> > > > +/* Secure world supports interrupt events notification to normal world */
> > > > +#define OPTEE_SMC_SEC_CAP_IT_NOTIF           BIT(7)
> > > > +
> > > > +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_MASK  GENMASK(23, 8)
> > > > +#define OPTEE_SMC_SEC_CAP_MAX_NOTIF_IT_SHIFT 8
> > > >
> > > >  #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES       9
> > > >  #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> > > > @@ -416,6 +422,12 @@ struct optee_smc_disable_shm_cache_result {
> > > >   */
> > > >  #define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF   0
> > > >
> > > > +/*
> > > > + * Notification that OP-TEE triggers an interrupt event to Linux kernel
> > > > + * for an interrupt consumer.
> > > > + */
> > > > +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT            1
> > > > +
> > > >  #define OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE       17
> > > >  #define OPTEE_SMC_GET_ASYNC_NOTIF_VALUE \
> > > >       OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE)
> > > > @@ -426,6 +438,70 @@ struct optee_smc_disable_shm_cache_result {
> > > >  /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
> > > >  #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG  19
> > > >
> > > > +/*
> > > > + * Retrieve the interrupt number of the pending interrupt event notified to
> > > > + * non-secure world since the last call of this function.
> > > > + *
> > > > + * OP-TEE keeps a record of all posted interrupt notification events. When the
> > > > + * async notif interrupt is received by non-secure world, this function should
> > > > + * be called until all pended interrupt events have been retrieved. When an
> > > > + * interrupt event is retrieved it is cleared from the record in secure world.
> > > > + *
> > > > + * It is expected that this function is called from an interrupt handler
> > > > + * in normal world.
> > > > + *
> > > > + * Call requests usage:
> > > > + * a0        SMC Function ID, OPTEE_SMC_GET_IT_NOTIF_VALUE
> > > > + * a1-6      Not used
> > > > + * a7        Hypervisor Client ID register
> > > > + *
> > > > + * Normal return register usage:
> > > > + * a0        OPTEE_SMC_RETURN_OK
> > > > + * a1        IT_NOTIF interrupt identifier value
> > > > + * a2        Bit[0]: OPTEE_SMC_IT_NOTIF_VALID if the value in a1 is
> > > > + *           valid, else 0 if no interrupt event were pending
> > > > + * a2        Bit[1]: OPTEE_SMC_IT_NOTIF_PENDING if another interrupt event
> > > > + *           value is pending, else 0.
> > > > + *   Bit[31:2]: MBZ
> > > > + * a3-7      Preserved
> > > > + *
> > > > + * Not supported return register usage:
> > > > + * a0        OPTEE_SMC_RETURN_ENOTAVAIL
> > > > + * a1-7      Preserved
> > > > + */
> > > > +#define OPTEE_SMC_IT_NOTIF_VALID             BIT(0)
> > > > +#define OPTEE_SMC_IT_NOTIF_PENDING           BIT(1)
> > > > +
> > > > +#define OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE  20
> > > > +#define OPTEE_SMC_GET_IT_NOTIF_VALUE \
> > > > +     OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_IT_NOTIF_VALUE)
> > > > +
> > > > +/*
> > > > + * Mask or unmask an interrupt notification event.
> > > > + *
> > > > + * It is expected that this function is called from an interrupt handler
> > > > + * in normal world.
> > > > + *
> > > > + * Call requests usage:
> > > > + * a0        SMC Function ID, OPTEE_SMC_SET_IT_NOTIF_MASK
> > > > + * a1        Interrupt identifier value
> > > > + * a2        Bit[0]: 1 if interrupt event is to be masked, 0 if it is to be unmasked
> > > > + * a2   Bit[31:1] MBZ
> > > > + * a3-6      Not used
> > > > + * a7        Hypervisor Client ID register
> > > > + *
> > > > + * Normal return register usage:
> > > > + * a0        OPTEE_SMC_RETURN_OK
> > > > + * a1-7      Preserved
> > > > + *
> > > > + * Not supdealed ported return register usage:
> > > > + * a0        OPTEE_SMC_RETURN_ENOTAVAIL
> > > > + * a1-7      Preserved
> > > > + */
> > > > +#define OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK   21
> > > > +#define OPTEE_SMC_SET_IT_NOTIF_MASK \
> > > > +     OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_SET_IT_NOTIF_MASK)
> > > > +
> > > >  /*
> > > >   * Resume from RPC (for example after processing a foreign interrupt)
> > > >   *
> > > > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> > > > index 8c2d58d605ac..0360afde119f 100644
> > > > --- a/drivers/tee/optee/smc_abi.c
> > > > +++ b/drivers/tee/optee/smc_abi.c
> > > > @@ -977,6 +977,112 @@ static int optee_smc_stop_async_notif(struct tee_context *ctx)
> > > >   * 5. Asynchronous notification
> > > >   */
> > > >
> > > > +static u32 get_it_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> > > > +                     bool *value_pending)
> > >
> > > What value? If this is supposed to return a set of pending bits, just
> > > name the function to reflect that.
> >
> > Communication between Linux kernel and OP-TEE is this case is rather
> > basic here, no shared memory used, only few CPU registers can be used
> > to shared information. So Linux invokes OP-TEE for each pending optee
> > interrupt event: each invocation returns a interrupt event number (an
> > integer value) and a status whether another interrupt event is pending
> > and shall be retrieved invoking OP-TEE again. In case Linux invoke
> > OP-TEE for a pending interrupt and none is pending, a last status is
> > also provided: 'value_valid'.
> >
> > I could maybe change the prototype to something like:
> > static u32 get_pending_it_number(optee_invoke_fn *invoke_fn, bool
> > *it_number_valid, bool *more_pending_it)
>
> What does 'it' mean? Interrupt? Spell it out. Really, this should read as:
>
>         get_pending_irq()

Ok, understood. Thanks.

>
>
> >
> > >
> > > Also, at no point do you explain that each PPI is only a mux interrupt
> > > for a bunch of chained interrupts.
> >
> > Sorry, I don't understand your question.
> > The "it notif" feature proposed in this change is not straight related a PPI.
> > Previous patch in this series is indeed related to PPI: it propose
> > optee driver can use a single PPI instead of a signle SPI for the
> > OP-TEE "asyn notification" feature.
> > This change allows to mux interrupts events (from OP-TEE to Linux
> > optee driver) over "OP-TEE async notif" means, which is using a single
> > SPI or PPI.
> > Maybe I should have submitted both changes separately :(
>
> Surely a less cryptic explaination would have helped.

Indeed. You're not the first to tell :(
Sorry I'll try to better use Linux wordings in Linux kernel changes.
Thanks for being frank.

>
> >
> > >
> > > > +{
> > > > +     struct arm_smccc_res res;
> > > > +
> > > > +     invoke_fn(OPTEE_SMC_GET_IT_NOTIF_VALUE, 0, 0, 0, 0, 0, 0, 0, &res);
> > > > +
> > > > +     if (res.a0)
> > > > +             return 0;
> > > > +
> > > > +     *value_valid = res.a2 & OPTEE_SMC_IT_NOTIF_VALID;
> > > > +     *value_pending = res.a2 & OPTEE_SMC_IT_NOTIF_PENDING;
> > > > +     return res.a1;
> > > > +}
> > > > +
> > > > +static u32 set_it_mask(optee_invoke_fn *invoke_fn, u32 it_value, bool mask)
> > > > +{
> > > > +     struct arm_smccc_res res;
> > > > +
> > > > +     invoke_fn(OPTEE_SMC_SET_IT_NOTIF_MASK, it_value, mask, 0, 0, 0, 0, 0, &res);
> > > > +
> > > > +     if (res.a0)
> > > > +             return 0;
> > > > +
> > > > +     return res.a1;
> > > > +}
> > > > +
> > > > +static int handle_optee_it(struct optee *optee)
> > > > +{
> > > > +     bool value_valid;
> > > > +     bool value_pending;
> > > > +     u32 it;
> > > > +
> > > > +     do {
> > > > +             struct irq_desc *desc;
> > > > +
> > > > +             it = get_it_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> > > > +             if (!value_valid)
> > > > +                     break;
> > > > +
> > > > +             desc = irq_to_desc(irq_find_mapping(optee->smc.domain, it));
> > > > +             if (!desc) {
> > > > +                     pr_err("no desc for optee IT:%d\n", it);
> > > > +                     return -EIO;
> > > > +             }
> > > > +
> > > > +             handle_simple_irq(desc);
> > > > +
> > >
> > > What is this? Please use generic_handle_domain_irq(), like any other
> > > driver. Why is the flow handler handle_simple_irq()? You need to
> > > explain what the signalling is for the secure-provided interrupts.
> >
> > My fault. I thought handle_simple_irq() would better apply here since
> > its description:
> >  * Simple interrupts are either sent from a demultiplexing interrupt
> >  * handler or come from hardware, where no interrupt hardware control
> >  * is necessary.
>
> Why isn't masking necessary? What is the signalling between OPTEE and
> NS? Does the "get_it_value" function *consume* the pending bits? You
> need to answer and document all of that, and only then pick the flow
> that matches these requirements.

Yes, thet get_pending_irq() function is expect to consume the pending irq.
As soon as it is consumed, any occurence of HW event (in OP-TEE world)
that results in this optee irq be raised, will set again that irq
number as pending and fire the irq leading to this get_pending_irq()
function be called.

Thanks for the feedback. Maksing, enabling etc... are indeed needed.
I'll come up with a (hopefully) better proposal.



>
> >
> > OP-TEE secure world has already dealt with the HW interrupt resources
> > (ack/etc...) before it notifies Linux kernel of the event.
> >
> > >
> > > > +     } while (value_pending);
> > > > +
> > > > +     return 0;
> > > > +}
> > > > +
> > > > +static void optee_it_irq_mask(struct irq_data *d)
> > > > +{
> > > > +     struct optee *optee = d->domain->host_data;
> > > > +
> > > > +     set_it_mask(optee->smc.invoke_fn, d->hwirq, true);
> > > > +}
> > > > +
> > > > +static void optee_it_irq_unmask(struct irq_data *d)
> > > > +{
> > > > +     struct optee *optee = d->domain->host_data;
> > > > +
> > > > +     set_it_mask(optee->smc.invoke_fn, d->hwirq, false);
> > > > +}
> > > > +
> > > > +static struct irq_chip optee_it_irq_chip = {
> > > > +     .name = "optee-it",
> > > > +     .irq_disable = optee_it_irq_mask,
> > > > +     .irq_enable = optee_it_irq_unmask,
> > > > +     .flags = IRQCHIP_SKIP_SET_WAKE,
> > >
> > > Is it a mask or a disable? These are different beasts.
> >
> > Indeed, thanks for catching that. I think we need to 4
> > (enable/disable/mask/unmask).
> > I'll fix.
>
> What does enable do differently from unmask?

I think I saw it the wrong way. I understand implementing .irq_mask &
.irq_unmask operations should be enough to notify OP-TEE world and let
it manage the interrupt detection on its side.


>
> >
> > >
> > > > +};
> > > > +
> > > > +static int optee_it_alloc(struct irq_domain *d, unsigned int virq,
> > > > +                       unsigned int nr_irqs, void *data)
> > > > +{
> > > > +     struct irq_fwspec *fwspec = data;
> > > > +     irq_hw_number_t hwirq;
> > > > +
> > > > +     hwirq = fwspec->param[0];
> > > > +
> > > > +     irq_domain_set_hwirq_and_chip(d, virq, hwirq, &optee_it_irq_chip, d->host_data);
> > > > +
> > > > +     return 0;
> > > > +}
> > > > +
> > > > +static const struct irq_domain_ops optee_it_irq_domain_ops = {
> > > > +     .alloc = optee_it_alloc,
> > > > +     .free = irq_domain_free_irqs_common,
> > > > +};
> > > > +
> > > > +static int optee_irq_domain_init(struct platform_device *pdev, struct optee *optee, u_int max_it)
> > > > +{
> > > > +     struct device *dev = &pdev->dev;
> > > > +     struct device_node *np = dev->of_node;
> > > > +
> > > > +     optee->smc.domain = irq_domain_add_linear(np, max_it, &optee_it_irq_domain_ops, optee);
> > > > +     if (!optee->smc.domain) {
> > > > +             dev_err(dev, "Unable to add irq domain\n");
> > > > +             return -ENOMEM;
> > > > +     }
> > > > +
> > > > +     return 0;
> > > > +}
> > > > +
> > > >  static u32 get_async_notif_value(optee_invoke_fn *invoke_fn, bool *value_valid,
> > > >                                bool *value_pending)
> > > >  {
> > > > @@ -1008,13 +1114,15 @@ static irqreturn_t notif_irq_handler(int irq, void *dev_id)
> > > >       }
> > > >
> > > >       do {
> > > > -             value = get_async_notif_value(optee->smc.invoke_fn,
> > > > -                                           &value_valid, &value_pending);
> > > > +             value = get_async_notif_value(optee->smc.invoke_fn, &value_valid, &value_pending);
> > > >               if (!value_valid)
> > > >                       break;
> > > >
> > > >               if (value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF)
> > > >                       do_bottom_half = true;
> > > > +             else if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_IT_NOTIF &&
> > > > +                      value == OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_IT)
> > > > +                     handle_optee_it(optee);
> > >
> > > NAK. This isn't how we deal with chained interrupts. Definitely not in
> > > an interrupt handler.
> >
> > My apologies, what is wrong in this sequence. My expectations are:
> > 1- Something happens on OP-TEE secure side that should be reported to
> > Linux as a software interrupt event
>
> Why? There is nothing Linux-specific in OPTEE. Why should OPTEE be
> prescriptive of the way this is handled?

In embedded system, we can have for example a unqiue GPIO expander to
get some input data, where some IOs are related to OP-TEE world side
services and other IOs for so-called normal world/Linux services.
Because OP-TEE is paranoïd, it controls the expenander and relays
Linux related interrupt to it Linux consumer driver through optee
driver, acting as a irq controller.
Wake up irqs can also need the same paths. The wake up controller is
under OP-TEE world control, by device implementation, but some wakeup
irqs should hit Linux as wakeup source.


>
> > 2- OP-TEE (secure world) raises an HW interrupt to notify Linux optee
> > driver that event(s) are pending
> > 3- optee driver threade_irq handler is called and asks OP-TEE which
> > are the pending events. This is done event per event until all pending
> > event are consumed.
>
> Why is this done in a thread? I'd expect the *handlers* to be
> threaded, but not the irqchip part of it (which is crucially missing
> here).

I do understand the optee irq implementation should be handled from
primary handler of the optee async notif irq.
I'll come with a better proposal, I hope.

Thanks for all the feedback and time spent for the explanations

Regards,
Etienne

>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.