[v9,3/9] drm/display: Add Type-C switch helpers
Commit Message
Add helpers to register and unregister Type-C "switches" for bridges
capable of switching their output between two downstream devices.
The helper registers USB Type-C mode switches when the "mode-switch"
and the "data-lanes" properties are available in Device Tree.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
---
(no changes since v8)
Changes in v8:
- Fixed the build issue when CONFIG_TYPEC=m
- Fixed some style issues
Changes in v7:
- Extracted the common codes to a helper function
- New in v7
drivers/gpu/drm/display/drm_dp_helper.c | 132 ++++++++++++++++++++++++
include/drm/display/drm_dp_helper.h | 16 +++
2 files changed, 148 insertions(+)
Comments
On Mon, Jan 9, 2023 at 4:41 PM Pin-yen Lin <treapking@chromium.org> wrote:
>
> Add helpers to register and unregister Type-C "switches" for bridges
> capable of switching their output between two downstream devices.
>
> The helper registers USB Type-C mode switches when the "mode-switch"
> and the "data-lanes" properties are available in Device Tree.
>
> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
on MT8192 based Hayato (ASUS Chromebook Flip CM3200).
> ---
>
> (no changes since v8)
>
> Changes in v8:
> - Fixed the build issue when CONFIG_TYPEC=m
> - Fixed some style issues
>
> Changes in v7:
> - Extracted the common codes to a helper function
> - New in v7
>
> drivers/gpu/drm/display/drm_dp_helper.c | 132 ++++++++++++++++++++++++
> include/drm/display/drm_dp_helper.h | 16 +++
> 2 files changed, 148 insertions(+)
>
> diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> index 16565a0a5da6..fb9e23744c08 100644
> --- a/drivers/gpu/drm/display/drm_dp_helper.c
> +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> @@ -30,11 +30,13 @@
> #include <linux/sched.h>
> #include <linux/seq_file.h>
> #include <linux/string_helpers.h>
> +#include <linux/usb/typec_mux.h>
> #include <linux/dynamic_debug.h>
>
> #include <drm/display/drm_dp_helper.h>
> #include <drm/display/drm_dp_mst_helper.h>
> #include <drm/drm_edid.h>
> +#include <drm/drm_of.h>
> #include <drm/drm_print.h>
> #include <drm/drm_vblank.h>
> #include <drm/drm_panel.h>
> @@ -3891,3 +3893,133 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
> EXPORT_SYMBOL(drm_panel_dp_aux_backlight);
>
> #endif
> +
> +#if IS_REACHABLE(CONFIG_TYPEC)
> +static int drm_dp_register_mode_switch(struct device *dev, struct device_node *node,
> + struct drm_dp_typec_switch_desc *switch_desc,
> + void *data, void *mux_set)
> +{
> + struct drm_dp_typec_port_data *port_data;
> + struct typec_mux_desc mux_desc = {};
> + char name[32];
> + u32 dp_lanes[2];
> + int ret, num_lanes, port_num = -1;
> +
> + num_lanes = drm_of_get_data_lanes_count(node, 0, 2);
> + if (num_lanes <= 0) {
> + dev_err(dev, "Error on getting data lanes count: %d\n",
> + num_lanes);
Also printing out the full node name (endpoint@N) would be more helpful.
> + return num_lanes;
> + }
> +
> + ret = of_property_read_u32_array(node, "data-lanes", dp_lanes, num_lanes);
> + if (ret) {
> + dev_err(dev, "Failed to read the data-lanes variable: %d\n",
> + ret);
Same here.
> + return ret;
> + }
> +
> + port_num = dp_lanes[0] / 2;
> +
> + port_data = &switch_desc->typec_ports[port_num];
> + port_data->data = data;
> + mux_desc.fwnode = &node->fwnode;
> + mux_desc.drvdata = port_data;
> + snprintf(name, sizeof(name), "%s-%u", node->name, port_num);
> + mux_desc.name = name;
> + mux_desc.set = mux_set;
> +
> + port_data->typec_mux = typec_mux_register(dev, &mux_desc);
> + if (IS_ERR(port_data->typec_mux)) {
> + ret = PTR_ERR(port_data->typec_mux);
> + dev_err(dev, "Mode switch register for port %d failed: %d\n",
> + port_num, ret);
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * drm_dp_register_typec_switches() - register Type-C switches
> + * @dev: Device that registers Type-C switches
> + * @port: Device node for the switch
> + * @switch_desc: A Type-C switch descriptor
> + * @data: Private data for the switches
> + * @mux_set: Callback function for typec_mux_set
> + *
> + * This function registers USB Type-C switches for DP bridges that can switch
> + * the output signal between their output pins.
> + *
> + * Currently only mode switches are implemented, and the function assumes the
> + * given @port device node has endpoints with "mode-switch" property.
> + * Register the endpoint as port 0 if the "data-lanes" property falls in 0/1,
> + * and register it as port 1 if "data-lanes" falls in 2/3.
> + */
> +int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
> + struct drm_dp_typec_switch_desc *switch_desc,
> + void *data, void *mux_set)
> +{
> + struct device_node *sw;
> + int ret;
> +
> + for_each_child_of_node(port, sw) {
> + if (of_property_read_bool(sw, "mode-switch"))
> + switch_desc->num_typec_switches++;
> + }
> +
> + if (!switch_desc->num_typec_switches) {
> + dev_warn(dev, "No Type-C switches node found\n");
Maybe change this to dev_info or even dev_debug? A warning would be too
noisy if the bridge drivers are calling this helper unconditionally.
Otherwise,
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
On Mon, Jan 9, 2023 at 6:10 PM Chen-Yu Tsai <wenst@chromium.org> wrote:
>
> On Mon, Jan 9, 2023 at 4:41 PM Pin-yen Lin <treapking@chromium.org> wrote:
> >
> > Add helpers to register and unregister Type-C "switches" for bridges
> > capable of switching their output between two downstream devices.
> >
> > The helper registers USB Type-C mode switches when the "mode-switch"
> > and the "data-lanes" properties are available in Device Tree.
> >
> > Signed-off-by: Pin-yen Lin <treapking@chromium.org>
>
> Tested-by: Chen-Yu Tsai <wenst@chromium.org>
>
> on MT8192 based Hayato (ASUS Chromebook Flip CM3200).
>
> > ---
> >
> > (no changes since v8)
> >
> > Changes in v8:
> > - Fixed the build issue when CONFIG_TYPEC=m
> > - Fixed some style issues
> >
> > Changes in v7:
> > - Extracted the common codes to a helper function
> > - New in v7
> >
> > drivers/gpu/drm/display/drm_dp_helper.c | 132 ++++++++++++++++++++++++
> > include/drm/display/drm_dp_helper.h | 16 +++
> > 2 files changed, 148 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> > index 16565a0a5da6..fb9e23744c08 100644
> > --- a/drivers/gpu/drm/display/drm_dp_helper.c
> > +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> > @@ -30,11 +30,13 @@
> > #include <linux/sched.h>
> > #include <linux/seq_file.h>
> > #include <linux/string_helpers.h>
> > +#include <linux/usb/typec_mux.h>
> > #include <linux/dynamic_debug.h>
> >
> > #include <drm/display/drm_dp_helper.h>
> > #include <drm/display/drm_dp_mst_helper.h>
> > #include <drm/drm_edid.h>
> > +#include <drm/drm_of.h>
> > #include <drm/drm_print.h>
> > #include <drm/drm_vblank.h>
> > #include <drm/drm_panel.h>
> > @@ -3891,3 +3893,133 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
> > EXPORT_SYMBOL(drm_panel_dp_aux_backlight);
> >
> > #endif
> > +
> > +#if IS_REACHABLE(CONFIG_TYPEC)
> > +static int drm_dp_register_mode_switch(struct device *dev, struct device_node *node,
> > + struct drm_dp_typec_switch_desc *switch_desc,
> > + void *data, void *mux_set)
Using "typec_mux_set_fn_t" instead of "void *" for mux_set would be
more explicit. Same for all the other instances where this parameter
gets declared.
ChenYu
> > +{
> > + struct drm_dp_typec_port_data *port_data;
> > + struct typec_mux_desc mux_desc = {};
> > + char name[32];
> > + u32 dp_lanes[2];
> > + int ret, num_lanes, port_num = -1;
> > +
> > + num_lanes = drm_of_get_data_lanes_count(node, 0, 2);
> > + if (num_lanes <= 0) {
> > + dev_err(dev, "Error on getting data lanes count: %d\n",
> > + num_lanes);
>
> Also printing out the full node name (endpoint@N) would be more helpful.
>
> > + return num_lanes;
> > + }
> > +
> > + ret = of_property_read_u32_array(node, "data-lanes", dp_lanes, num_lanes);
> > + if (ret) {
> > + dev_err(dev, "Failed to read the data-lanes variable: %d\n",
> > + ret);
>
> Same here.
>
> > + return ret;
> > + }
> > +
> > + port_num = dp_lanes[0] / 2;
> > +
> > + port_data = &switch_desc->typec_ports[port_num];
> > + port_data->data = data;
> > + mux_desc.fwnode = &node->fwnode;
> > + mux_desc.drvdata = port_data;
> > + snprintf(name, sizeof(name), "%s-%u", node->name, port_num);
> > + mux_desc.name = name;
> > + mux_desc.set = mux_set;
> > +
> > + port_data->typec_mux = typec_mux_register(dev, &mux_desc);
> > + if (IS_ERR(port_data->typec_mux)) {
> > + ret = PTR_ERR(port_data->typec_mux);
> > + dev_err(dev, "Mode switch register for port %d failed: %d\n",
> > + port_num, ret);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * drm_dp_register_typec_switches() - register Type-C switches
> > + * @dev: Device that registers Type-C switches
> > + * @port: Device node for the switch
> > + * @switch_desc: A Type-C switch descriptor
> > + * @data: Private data for the switches
> > + * @mux_set: Callback function for typec_mux_set
> > + *
> > + * This function registers USB Type-C switches for DP bridges that can switch
> > + * the output signal between their output pins.
> > + *
> > + * Currently only mode switches are implemented, and the function assumes the
> > + * given @port device node has endpoints with "mode-switch" property.
> > + * Register the endpoint as port 0 if the "data-lanes" property falls in 0/1,
> > + * and register it as port 1 if "data-lanes" falls in 2/3.
> > + */
> > +int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
> > + struct drm_dp_typec_switch_desc *switch_desc,
> > + void *data, void *mux_set)
> > +{
> > + struct device_node *sw;
> > + int ret;
> > +
> > + for_each_child_of_node(port, sw) {
> > + if (of_property_read_bool(sw, "mode-switch"))
> > + switch_desc->num_typec_switches++;
> > + }
> > +
> > + if (!switch_desc->num_typec_switches) {
> > + dev_warn(dev, "No Type-C switches node found\n");
>
> Maybe change this to dev_info or even dev_debug? A warning would be too
> noisy if the bridge drivers are calling this helper unconditionally.
>
> Otherwise,
>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Il 09/01/23 09:40, Pin-yen Lin ha scritto:
> Add helpers to register and unregister Type-C "switches" for bridges
> capable of switching their output between two downstream devices.
>
> The helper registers USB Type-C mode switches when the "mode-switch"
> and the "data-lanes" properties are available in Device Tree.
>
> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
>
> ---
>
> (no changes since v8)
>
> Changes in v8:
> - Fixed the build issue when CONFIG_TYPEC=m
> - Fixed some style issues
>
> Changes in v7:
> - Extracted the common codes to a helper function
> - New in v7
>
> drivers/gpu/drm/display/drm_dp_helper.c | 132 ++++++++++++++++++++++++
> include/drm/display/drm_dp_helper.h | 16 +++
> 2 files changed, 148 insertions(+)
>
> diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> index 16565a0a5da6..fb9e23744c08 100644
> --- a/drivers/gpu/drm/display/drm_dp_helper.c
> +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> @@ -30,11 +30,13 @@
> #include <linux/sched.h>
> #include <linux/seq_file.h>
> #include <linux/string_helpers.h>
> +#include <linux/usb/typec_mux.h>
> #include <linux/dynamic_debug.h>
>
> #include <drm/display/drm_dp_helper.h>
> #include <drm/display/drm_dp_mst_helper.h>
> #include <drm/drm_edid.h>
> +#include <drm/drm_of.h>
> #include <drm/drm_print.h>
> #include <drm/drm_vblank.h>
> #include <drm/drm_panel.h>
> @@ -3891,3 +3893,133 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
> EXPORT_SYMBOL(drm_panel_dp_aux_backlight);
>
> #endif
> +
> +#if IS_REACHABLE(CONFIG_TYPEC)
> +static int drm_dp_register_mode_switch(struct device *dev, struct device_node *node,
> + struct drm_dp_typec_switch_desc *switch_desc,
> + void *data, void *mux_set)
> +{
> + struct drm_dp_typec_port_data *port_data;
> + struct typec_mux_desc mux_desc = {};
> + char name[32];
> + u32 dp_lanes[2];
> + int ret, num_lanes, port_num = -1;
> +
> + num_lanes = drm_of_get_data_lanes_count(node, 0, 2);
> + if (num_lanes <= 0) {
> + dev_err(dev, "Error on getting data lanes count: %d\n",
> + num_lanes);
> + return num_lanes;
> + }
> +
> + ret = of_property_read_u32_array(node, "data-lanes", dp_lanes, num_lanes);
> + if (ret) {
> + dev_err(dev, "Failed to read the data-lanes variable: %d\n",
> + ret);
> + return ret;
> + }
> +
> + port_num = dp_lanes[0] / 2;
> +
> + port_data = &switch_desc->typec_ports[port_num];
> + port_data->data = data;
> + mux_desc.fwnode = &node->fwnode;
> + mux_desc.drvdata = port_data;
> + snprintf(name, sizeof(name), "%s-%u", node->name, port_num);
> + mux_desc.name = name;
> + mux_desc.set = mux_set;
> +
> + port_data->typec_mux = typec_mux_register(dev, &mux_desc);
> + if (IS_ERR(port_data->typec_mux)) {
I would propose, instead...
> + ret = PTR_ERR(port_data->typec_mux);
> + dev_err(dev, "Mode switch register for port %d failed: %d\n",
> + port_num, ret);
return ret;
> + }
> +
> + return ret;
return 0;
> +}
> +
...but I don't have strong opinions, so regardless of that:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
@@ -30,11 +30,13 @@
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/string_helpers.h>
+#include <linux/usb/typec_mux.h>
#include <linux/dynamic_debug.h>
#include <drm/display/drm_dp_helper.h>
#include <drm/display/drm_dp_mst_helper.h>
#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
#include <drm/drm_print.h>
#include <drm/drm_vblank.h>
#include <drm/drm_panel.h>
@@ -3891,3 +3893,133 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
EXPORT_SYMBOL(drm_panel_dp_aux_backlight);
#endif
+
+#if IS_REACHABLE(CONFIG_TYPEC)
+static int drm_dp_register_mode_switch(struct device *dev, struct device_node *node,
+ struct drm_dp_typec_switch_desc *switch_desc,
+ void *data, void *mux_set)
+{
+ struct drm_dp_typec_port_data *port_data;
+ struct typec_mux_desc mux_desc = {};
+ char name[32];
+ u32 dp_lanes[2];
+ int ret, num_lanes, port_num = -1;
+
+ num_lanes = drm_of_get_data_lanes_count(node, 0, 2);
+ if (num_lanes <= 0) {
+ dev_err(dev, "Error on getting data lanes count: %d\n",
+ num_lanes);
+ return num_lanes;
+ }
+
+ ret = of_property_read_u32_array(node, "data-lanes", dp_lanes, num_lanes);
+ if (ret) {
+ dev_err(dev, "Failed to read the data-lanes variable: %d\n",
+ ret);
+ return ret;
+ }
+
+ port_num = dp_lanes[0] / 2;
+
+ port_data = &switch_desc->typec_ports[port_num];
+ port_data->data = data;
+ mux_desc.fwnode = &node->fwnode;
+ mux_desc.drvdata = port_data;
+ snprintf(name, sizeof(name), "%s-%u", node->name, port_num);
+ mux_desc.name = name;
+ mux_desc.set = mux_set;
+
+ port_data->typec_mux = typec_mux_register(dev, &mux_desc);
+ if (IS_ERR(port_data->typec_mux)) {
+ ret = PTR_ERR(port_data->typec_mux);
+ dev_err(dev, "Mode switch register for port %d failed: %d\n",
+ port_num, ret);
+ }
+
+ return ret;
+}
+
+/**
+ * drm_dp_register_typec_switches() - register Type-C switches
+ * @dev: Device that registers Type-C switches
+ * @port: Device node for the switch
+ * @switch_desc: A Type-C switch descriptor
+ * @data: Private data for the switches
+ * @mux_set: Callback function for typec_mux_set
+ *
+ * This function registers USB Type-C switches for DP bridges that can switch
+ * the output signal between their output pins.
+ *
+ * Currently only mode switches are implemented, and the function assumes the
+ * given @port device node has endpoints with "mode-switch" property.
+ * Register the endpoint as port 0 if the "data-lanes" property falls in 0/1,
+ * and register it as port 1 if "data-lanes" falls in 2/3.
+ */
+int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
+ struct drm_dp_typec_switch_desc *switch_desc,
+ void *data, void *mux_set)
+{
+ struct device_node *sw;
+ int ret;
+
+ for_each_child_of_node(port, sw) {
+ if (of_property_read_bool(sw, "mode-switch"))
+ switch_desc->num_typec_switches++;
+ }
+
+ if (!switch_desc->num_typec_switches) {
+ dev_warn(dev, "No Type-C switches node found\n");
+ return 0;
+ }
+
+ switch_desc->typec_ports = devm_kcalloc(
+ dev, switch_desc->num_typec_switches,
+ sizeof(struct drm_dp_typec_port_data), GFP_KERNEL);
+
+ if (!switch_desc->typec_ports)
+ return -ENOMEM;
+
+ /* Register switches for each connector. */
+ for_each_child_of_node(port, sw) {
+ if (!of_property_read_bool(sw, "mode-switch"))
+ continue;
+ ret = drm_dp_register_mode_switch(dev, sw, switch_desc, data, mux_set);
+ if (ret)
+ goto err_unregister_typec_switches;
+ }
+
+ return 0;
+
+err_unregister_typec_switches:
+ of_node_put(sw);
+ drm_dp_unregister_typec_switches(switch_desc);
+ dev_err(dev, "Failed to register mode switch: %d\n", ret);
+ return ret;
+}
+EXPORT_SYMBOL(drm_dp_register_typec_switches);
+
+/**
+ * drm_dp_unregister_typec_switches() - unregister Type-C switches
+ * @switch_desc: A Type-C switch descriptor
+ */
+void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc)
+{
+ int i;
+
+ for (i = 0; i < switch_desc->num_typec_switches; i++)
+ typec_mux_unregister(switch_desc->typec_ports[i].typec_mux);
+}
+EXPORT_SYMBOL(drm_dp_unregister_typec_switches);
+#else
+void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc)
+{
+}
+EXPORT_SYMBOL(drm_dp_register_typec_switches);
+int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
+ struct drm_dp_typec_switch_desc *switch_desc,
+ void *data, void *mux_set)
+{
+ return 0;
+}
+EXPORT_SYMBOL(drm_dp_unregister_typec_switches);
+#endif
@@ -763,4 +763,20 @@ bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZ
const u8 port_cap[4], u8 color_spc);
int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc);
+struct drm_dp_typec_port_data {
+ struct typec_mux_dev *typec_mux;
+ void *data;
+ bool dp_connected;
+};
+
+struct drm_dp_typec_switch_desc {
+ int num_typec_switches;
+ struct drm_dp_typec_port_data *typec_ports;
+};
+
+void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc);
+int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
+ struct drm_dp_typec_switch_desc *switch_desc,
+ void *data, void *mux_set);
+
#endif /* _DRM_DP_HELPER_H_ */