[v8,7/9] dt/bindings: display: bridge: it6505: Add mode-switch support
Commit Message
ITE IT6505 can be used in systems to switch the DP traffic between
two downstreams, which can be USB Type-C DisplayPort alternate mode
lane or regular DisplayPort output ports.
Update the binding to accommodate this usage by introducing a
data-lanes and a mode-switch property on endpoints.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
---
Changes in v8:
- Updated bindings for data-lanes property
- Fixed subject prefix
Changes in v7:
- Fixed issues reported by dt_binding_check.
- Updated the schema and the example dts for data-lanes.
- Changed to generic naming for the example dts node.
Changes in v6:
- Remove switches node and use endpoints and data-lanes property to
describe the connections.
.../bindings/display/bridge/ite,it6505.yaml | 93 ++++++++++++++++---
1 file changed, 82 insertions(+), 11 deletions(-)
Comments
On 07/01/2023 11:22, Pin-yen Lin wrote:
> ITE IT6505 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
>
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
>
> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
>
> ---
>
> Changes in v8:
> - Updated bindings for data-lanes property
> - Fixed subject prefix
How? It is still wrong. You have slash there.
>
(...)
> port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> reg = <1>;
> - it6505_out: endpoint {
> + it6505_out: endpoint@0 {
> + reg = <0>;
> remote-endpoint = <&dp_in>;
> data-lanes = <0 1>;
> };
> @@ -148,3 +173,49 @@ examples:
> };
> };
> };
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + i2c3 {
Just i2c
Best regards,
Krzysztof
Hi Krzysztof,
Thanks for your review.
On Sun, Jan 8, 2023 at 10:59 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 07/01/2023 11:22, Pin-yen Lin wrote:
> > ITE IT6505 can be used in systems to switch the DP traffic between
> > two downstreams, which can be USB Type-C DisplayPort alternate mode
> > lane or regular DisplayPort output ports.
> >
> > Update the binding to accommodate this usage by introducing a
> > data-lanes and a mode-switch property on endpoints.
> >
> > Signed-off-by: Pin-yen Lin <treapking@chromium.org>
> >
> > ---
> >
> > Changes in v8:
> > - Updated bindings for data-lanes property
> > - Fixed subject prefix
>
> How? It is still wrong. You have slash there.
Sorry, I didn't even notice that. I'll fix this in v9.
>
> >
>
> (...)
>
> > port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > reg = <1>;
> > - it6505_out: endpoint {
> > + it6505_out: endpoint@0 {
> > + reg = <0>;
> > remote-endpoint = <&dp_in>;
> > data-lanes = <0 1>;
> > };
> > @@ -148,3 +173,49 @@ examples:
> > };
> > };
> > };
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > + i2c3 {
>
> Just i2c
I missed this when preparing v8. I'll fix this in v9.
>
>
> Best regards,
> Krzysztof
>
Best regards,
Pin-yen
@@ -77,20 +77,43 @@ properties:
unevaluatedProperties: false
description: Video port for DP output
- properties:
- endpoint:
+ patternProperties:
+ "^endpoint@[01]$":
$ref: /schemas/graph.yaml#/$defs/endpoint-base
unevaluatedProperties: false
properties:
+ reg:
+ maxItems: 1
+
+ remote-endpoint: true
+
data-lanes:
- minItems: 1
- uniqueItems: true
- items:
- - enum: [ 0, 1 ]
- - const: 1
- - const: 2
- - const: 3
+ oneOf:
+ - items:
+ - enum: [0, 1, 2, 3]
+
+ - items:
+ - const: 0
+ - const: 1
+
+ - items:
+ - const: 2
+ - const: 3
+
+ - items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+
+ mode-switch:
+ type: boolean
+ description: Register this node as a Type-C mode switch or not.
+
+ required:
+ - reg
+ - remote-endpoint
required:
- port@0
@@ -102,7 +125,6 @@ required:
- pwr18-supply
- interrupts
- reset-gpios
- - extcon
- ports
additionalProperties: false
@@ -139,8 +161,11 @@ examples:
};
port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- it6505_out: endpoint {
+ it6505_out: endpoint@0 {
+ reg = <0>;
remote-endpoint = <&dp_in>;
data-lanes = <0 1>;
};
@@ -148,3 +173,49 @@ examples:
};
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp-bridge@5c {
+ compatible = "ite,it6505";
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW 8 0>;
+ reg = <0x5c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&it6505_pins>;
+ ovdd-supply = <&mt6366_vsim2_reg>;
+ pwr18-supply = <&pp1800_dpbrdg_dx>;
+ reset-gpios = <&pio 177 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ it6505_dpi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ ite_typec0: endpoint@0 {
+ reg = <0>;
+ mode-switch;
+ data-lanes = <0 1>;
+ remote-endpoint = <&typec_port0>;
+ };
+ ite_typec1: endpoint@1 {
+ reg = <1>;
+ mode-switch;
+ data-lanes = <2 3>;
+ remote-endpoint = <&typec_port1>;
+ };
+ };
+ };
+ };
+ };