diff mbox series

[V2,05/11] remoteproc: qcom_q6v5_mss: revert "map/unmap metadata region before/after use"

Message ID 20230109034843.23759-6-quic_sibis@quicinc.com
State New
Headers
Series Fix XPU violation during modem metadata authentication |

Commit Message

Sibi Sankar Jan. 9, 2023, 3:48 a.m. UTC 
  This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4.

The memory region allocated using dma_alloc_attr with no kernel mapping
attribute set would still be a part of the linear kernel map. Hence as a
precursor to using reserved memory for modem metadata region, revert back
to the simpler way of dynamic memory allocation.

Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 38 +++++-------------------------
 1 file changed, 6 insertions(+), 32 deletions(-)

Comments

Manivannan Sadhasivam Jan. 9, 2023, 8:18 a.m. UTC | #1 
+ Christoph

Hi Sibi,

On Mon, Jan 09, 2023 at 09:18:37AM +0530, Sibi Sankar wrote:
> This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4.
> 
> The memory region allocated using dma_alloc_attr with no kernel mapping
> attribute set would still be a part of the linear kernel map. Hence as a
> precursor to using reserved memory for modem metadata region, revert back
> to the simpler way of dynamic memory allocation.
> 
> Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>

Christoph already submitted a patch that reverts fc156629b23a:
https://lore.kernel.org/linux-arm-msm/20221223092703.61927-2-hch@lst.de/

Thanks,
Mani

> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 38 +++++-------------------------
>  1 file changed, 6 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 2f4027664a0e..e2f765f87ec9 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -10,7 +10,6 @@
>  #include <linux/clk.h>
>  #include <linux/delay.h>
>  #include <linux/devcoredump.h>
> -#include <linux/dma-map-ops.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
> @@ -961,52 +960,27 @@ static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
>  static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
>  				const char *fw_name)
>  {
> -	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING;
> -	unsigned long flags = VM_DMA_COHERENT | VM_FLUSH_RESET_PERMS;
> -	struct page **pages;
> -	struct page *page;
> +	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
>  	dma_addr_t phys;
>  	void *metadata;
>  	int mdata_perm;
>  	int xferop_ret;
>  	size_t size;
> -	void *vaddr;
> -	int count;
> +	void *ptr;
>  	int ret;
> -	int i;
>  
>  	metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
>  	if (IS_ERR(metadata))
>  		return PTR_ERR(metadata);
>  
> -	page = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
> -	if (!page) {
> +	ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
> +	if (!ptr) {
>  		kfree(metadata);
>  		dev_err(qproc->dev, "failed to allocate mdt buffer\n");
>  		return -ENOMEM;
>  	}
>  
> -	count = PAGE_ALIGN(size) >> PAGE_SHIFT;
> -	pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
> -	if (!pages) {
> -		ret = -ENOMEM;
> -		goto free_dma_attrs;
> -	}
> -
> -	for (i = 0; i < count; i++)
> -		pages[i] = nth_page(page, i);
> -
> -	vaddr = vmap(pages, count, flags, pgprot_dmacoherent(PAGE_KERNEL));
> -	kfree(pages);
> -	if (!vaddr) {
> -		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", &phys, size);
> -		ret = -EBUSY;
> -		goto free_dma_attrs;
> -	}
> -
> -	memcpy(vaddr, metadata, size);
> -
> -	vunmap(vaddr);
> +	memcpy(ptr, metadata, size);
>  
>  	/* Hypervisor mapping to access metadata by modem */
>  	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
> @@ -1036,7 +1010,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
>  			 "mdt buffer not reclaimed system may become unstable\n");
>  
>  free_dma_attrs:
> -	dma_free_attrs(qproc->dev, size, page, phys, dma_attrs);
> +	dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
>  	kfree(metadata);
>  
>  	return ret < 0 ? ret : 0;
> -- 
> 2.17.1
>
Sibi Sankar Jan. 9, 2023, 10 a.m. UTC | #2 
Hey Mani,
Thanks for taking time to review the series.

On 1/9/23 13:48, Manivannan Sadhasivam wrote:
> + Christoph
> 
> Hi Sibi,
> 
> On Mon, Jan 09, 2023 at 09:18:37AM +0530, Sibi Sankar wrote:
>> This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4.
>>
>> The memory region allocated using dma_alloc_attr with no kernel mapping
>> attribute set would still be a part of the linear kernel map. Hence as a
>> precursor to using reserved memory for modem metadata region, revert back
>> to the simpler way of dynamic memory allocation.
>>
>> Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> 
> Christoph already submitted a patch that reverts fc156629b23a:
> https://lore.kernel.org/linux-arm-msm/20221223092703.61927-2-hch@lst.de/

Having ^^ revert as part of the this series makes more sense. I'll
just replace my patch with ^^ in the next re-spin.

> 
> Thanks,
> Mani
> 
>> ---
>>   drivers/remoteproc/qcom_q6v5_mss.c | 38 +++++-------------------------
>>   1 file changed, 6 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 2f4027664a0e..e2f765f87ec9 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -10,7 +10,6 @@
>>   #include <linux/clk.h>
>>   #include <linux/delay.h>
>>   #include <linux/devcoredump.h>
>> -#include <linux/dma-map-ops.h>
>>   #include <linux/dma-mapping.h>
>>   #include <linux/interrupt.h>
>>   #include <linux/kernel.h>
>> @@ -961,52 +960,27 @@ static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
>>   static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
>>   				const char *fw_name)
>>   {
>> -	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING;
>> -	unsigned long flags = VM_DMA_COHERENT | VM_FLUSH_RESET_PERMS;
>> -	struct page **pages;
>> -	struct page *page;
>> +	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
>>   	dma_addr_t phys;
>>   	void *metadata;
>>   	int mdata_perm;
>>   	int xferop_ret;
>>   	size_t size;
>> -	void *vaddr;
>> -	int count;
>> +	void *ptr;
>>   	int ret;
>> -	int i;
>>   
>>   	metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
>>   	if (IS_ERR(metadata))
>>   		return PTR_ERR(metadata);
>>   
>> -	page = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
>> -	if (!page) {
>> +	ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
>> +	if (!ptr) {
>>   		kfree(metadata);
>>   		dev_err(qproc->dev, "failed to allocate mdt buffer\n");
>>   		return -ENOMEM;
>>   	}
>>   
>> -	count = PAGE_ALIGN(size) >> PAGE_SHIFT;
>> -	pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
>> -	if (!pages) {
>> -		ret = -ENOMEM;
>> -		goto free_dma_attrs;
>> -	}
>> -
>> -	for (i = 0; i < count; i++)
>> -		pages[i] = nth_page(page, i);
>> -
>> -	vaddr = vmap(pages, count, flags, pgprot_dmacoherent(PAGE_KERNEL));
>> -	kfree(pages);
>> -	if (!vaddr) {
>> -		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", &phys, size);
>> -		ret = -EBUSY;
>> -		goto free_dma_attrs;
>> -	}
>> -
>> -	memcpy(vaddr, metadata, size);
>> -
>> -	vunmap(vaddr);
>> +	memcpy(ptr, metadata, size);
>>   
>>   	/* Hypervisor mapping to access metadata by modem */
>>   	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
>> @@ -1036,7 +1010,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
>>   			 "mdt buffer not reclaimed system may become unstable\n");
>>   
>>   free_dma_attrs:
>> -	dma_free_attrs(qproc->dev, size, page, phys, dma_attrs);
>> +	dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
>>   	kfree(metadata);
>>   
>>   	return ret < 0 ? ret : 0;
>> -- 
>> 2.17.1
>>
>
Manivannan Sadhasivam Jan. 11, 2023, 11:24 a.m. UTC | #3 
On Mon, Jan 09, 2023 at 03:30:22PM +0530, Sibi Sankar wrote:
> Hey Mani,
> Thanks for taking time to review the series.
> 
> On 1/9/23 13:48, Manivannan Sadhasivam wrote:
> > + Christoph
> > 
> > Hi Sibi,
> > 
> > On Mon, Jan 09, 2023 at 09:18:37AM +0530, Sibi Sankar wrote:
> > > This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4.
> > > 
> > > The memory region allocated using dma_alloc_attr with no kernel mapping
> > > attribute set would still be a part of the linear kernel map. Hence as a
> > > precursor to using reserved memory for modem metadata region, revert back
> > > to the simpler way of dynamic memory allocation.
> > > 
> > > Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> > 
> > Christoph already submitted a patch that reverts fc156629b23a:
> > https://lore.kernel.org/linux-arm-msm/20221223092703.61927-2-hch@lst.de/
> 
> Having ^^ revert as part of the this series makes more sense. I'll
> just replace my patch with ^^ in the next re-spin.
> 

That makes sense to me.

Thanks,
Mani

> > 
> > Thanks,
> > Mani
> > 
> > > ---
> > >   drivers/remoteproc/qcom_q6v5_mss.c | 38 +++++-------------------------
> > >   1 file changed, 6 insertions(+), 32 deletions(-)
> > > 
> > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> > > index 2f4027664a0e..e2f765f87ec9 100644
> > > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > > @@ -10,7 +10,6 @@
> > >   #include <linux/clk.h>
> > >   #include <linux/delay.h>
> > >   #include <linux/devcoredump.h>
> > > -#include <linux/dma-map-ops.h>
> > >   #include <linux/dma-mapping.h>
> > >   #include <linux/interrupt.h>
> > >   #include <linux/kernel.h>
> > > @@ -961,52 +960,27 @@ static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
> > >   static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
> > >   				const char *fw_name)
> > >   {
> > > -	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING;
> > > -	unsigned long flags = VM_DMA_COHERENT | VM_FLUSH_RESET_PERMS;
> > > -	struct page **pages;
> > > -	struct page *page;
> > > +	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
> > >   	dma_addr_t phys;
> > >   	void *metadata;
> > >   	int mdata_perm;
> > >   	int xferop_ret;
> > >   	size_t size;
> > > -	void *vaddr;
> > > -	int count;
> > > +	void *ptr;
> > >   	int ret;
> > > -	int i;
> > >   	metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
> > >   	if (IS_ERR(metadata))
> > >   		return PTR_ERR(metadata);
> > > -	page = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
> > > -	if (!page) {
> > > +	ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
> > > +	if (!ptr) {
> > >   		kfree(metadata);
> > >   		dev_err(qproc->dev, "failed to allocate mdt buffer\n");
> > >   		return -ENOMEM;
> > >   	}
> > > -	count = PAGE_ALIGN(size) >> PAGE_SHIFT;
> > > -	pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
> > > -	if (!pages) {
> > > -		ret = -ENOMEM;
> > > -		goto free_dma_attrs;
> > > -	}
> > > -
> > > -	for (i = 0; i < count; i++)
> > > -		pages[i] = nth_page(page, i);
> > > -
> > > -	vaddr = vmap(pages, count, flags, pgprot_dmacoherent(PAGE_KERNEL));
> > > -	kfree(pages);
> > > -	if (!vaddr) {
> > > -		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", &phys, size);
> > > -		ret = -EBUSY;
> > > -		goto free_dma_attrs;
> > > -	}
> > > -
> > > -	memcpy(vaddr, metadata, size);
> > > -
> > > -	vunmap(vaddr);
> > > +	memcpy(ptr, metadata, size);
> > >   	/* Hypervisor mapping to access metadata by modem */
> > >   	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
> > > @@ -1036,7 +1010,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
> > >   			 "mdt buffer not reclaimed system may become unstable\n");
> > >   free_dma_attrs:
> > > -	dma_free_attrs(qproc->dev, size, page, phys, dma_attrs);
> > > +	dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
> > >   	kfree(metadata);
> > >   	return ret < 0 ? ret : 0;
> > > -- 
> > > 2.17.1
> > > 
> >
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 2f4027664a0e..e2f765f87ec9 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -10,7 +10,6 @@ 
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/devcoredump.h>
-#include <linux/dma-map-ops.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -961,52 +960,27 @@  static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
 static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
 				const char *fw_name)
 {
-	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING;
-	unsigned long flags = VM_DMA_COHERENT | VM_FLUSH_RESET_PERMS;
-	struct page **pages;
-	struct page *page;
+	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
 	dma_addr_t phys;
 	void *metadata;
 	int mdata_perm;
 	int xferop_ret;
 	size_t size;
-	void *vaddr;
-	int count;
+	void *ptr;
 	int ret;
-	int i;
 
 	metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
 	if (IS_ERR(metadata))
 		return PTR_ERR(metadata);
 
-	page = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
-	if (!page) {
+	ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs);
+	if (!ptr) {
 		kfree(metadata);
 		dev_err(qproc->dev, "failed to allocate mdt buffer\n");
 		return -ENOMEM;
 	}
 
-	count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	pages = kmalloc_array(count, sizeof(struct page *), GFP_KERNEL);
-	if (!pages) {
-		ret = -ENOMEM;
-		goto free_dma_attrs;
-	}
-
-	for (i = 0; i < count; i++)
-		pages[i] = nth_page(page, i);
-
-	vaddr = vmap(pages, count, flags, pgprot_dmacoherent(PAGE_KERNEL));
-	kfree(pages);
-	if (!vaddr) {
-		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", &phys, size);
-		ret = -EBUSY;
-		goto free_dma_attrs;
-	}
-
-	memcpy(vaddr, metadata, size);
-
-	vunmap(vaddr);
+	memcpy(ptr, metadata, size);
 
 	/* Hypervisor mapping to access metadata by modem */
 	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
@@ -1036,7 +1010,7 @@  static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
 			 "mdt buffer not reclaimed system may become unstable\n");
 
 free_dma_attrs:
-	dma_free_attrs(qproc->dev, size, page, phys, dma_attrs);
+	dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs);
 	kfree(metadata);
 
 	return ret < 0 ? ret : 0;