[4/5] spi: dt-bindings: Add hold/inactive CS delay peripheral properties
Commit Message
From: Janne Grunau <j@jannau.net>
These two properties complete the bindings for the Linux spi_device cs
model, which includes cs_setup, cs_hold and cs_inactive delay values.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
.../devicetree/bindings/spi/spi-peripheral-props.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
Comments
On Wed, 04 Jan 2023 18:36:30 +0900, Hector Martin wrote:
> From: Janne Grunau <j@jannau.net>
>
> These two properties complete the bindings for the Linux spi_device cs
> model, which includes cs_setup, cs_hold and cs_inactive delay values.
>
> Signed-off-by: Janne Grunau <j@jannau.net>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
> .../devicetree/bindings/spi/spi-peripheral-props.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
@@ -49,6 +49,16 @@ properties:
Delay in nanoseconds to be introduced by the controller after CS is
asserted.
+ spi-cs-hold-delay-ns:
+ description:
+ Delay in nanoseconds to be introduced by the controller before CS is
+ de-asserted.
+
+ spi-cs-inactive-delay-ns:
+ description:
+ Delay in nanoseconds to be introduced by the controller after CS is
+ de-asserted.
+
spi-rx-bus-width:
description:
Bus width to the SPI bus used for read transfers.