[v2,1/1] mtd: spi-nor: micron-st: Enable locking for n25q256ax1/mt25qu256a

Message ID 20221019071631.15191-1-farbere@amazon.com
State New
Headers
Series [v2,1/1] mtd: spi-nor: micron-st: Enable locking for n25q256ax1/mt25qu256a |

Commit Message

Farber, Eliav Oct. 19, 2022, 7:16 a.m. UTC
  n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id - 0x20bb19)
use the 4 bit Block Protection scheme and support Top/Bottom protection
via the BP and TB bits of the Status Register.
BP3 is located in bit 6 of the Status Register.
Tested on both n25q256ax1 and mt25qu256a.

[1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf
[2] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
xxd -p /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
53464450060101ff00060110300000ff84000102800000ffffffffffffff
ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
ffffffffffffffffffe7ffff21dcffff                            

md5sum /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
5ea738216f68c9f98987bb3725699a32  /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp

cat /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id
20bb19104400

cat /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname 
mt25qu256a

cat /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer 
st

v2 --> v1:
- Enable locking also for mt25qu256a.
- Dump the SFDP tables.

 drivers/mtd/spi-nor/micron-st.c | 4 ++++
 1 file changed, 4 insertions(+)
  

Comments

Michael Walle Oct. 19, 2022, 8:21 a.m. UTC | #1
Hi,

Am 2022-10-19 09:16, schrieb Eliav Farber:
> n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id - 0x20bb19)
> use the 4 bit Block Protection scheme and support Top/Bottom protection
> via the BP and TB bits of the Status Register.
> BP3 is located in bit 6 of the Status Register.
> Tested on both n25q256ax1 and mt25qu256a.
> 
> [1] 
> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf
> [2] 
> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf

If you respin, you can use a "Link:" tag for the URL above.

> Signed-off-by: Eliav Farber <farbere@amazon.com>
> ---
> xxd -p
> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp
> 53464450060101ff00060110300000ff84000102800000ffffffffffffff
> ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
> 273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
> 03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
> ffffffffffffffffffe7ffff21dcffff
> 
> md5sum
> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp
> 5ea738216f68c9f98987bb3725699a32
> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp
> 
> cat
> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id
> 20bb19104400
> 
> cat
> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname
> mt25qu256a
> 
> cat
> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer
> st

That's the mt25qu256a SFDP. What about the n25q256ax1?

Thanks!
-michael

> 
> v2 --> v1:
> - Enable locking also for mt25qu256a.
> - Dump the SFDP tables.
> 
>  drivers/mtd/spi-nor/micron-st.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/micron-st.c 
> b/drivers/mtd/spi-nor/micron-st.c
> index 3c9681a3f7a3..f4d0153a5b1b 100644
> --- a/drivers/mtd/spi-nor/micron-st.c
> +++ b/drivers/mtd/spi-nor/micron-st.c
> @@ -201,11 +201,15 @@ static const struct flash_info st_nor_parts[] = {
>  		MFR_FLAGS(USE_FSR)
>  	},
>  	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512)
> +		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
> +		      SPI_NOR_BP3_SR_BIT6)
>  		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
>  		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
>  		MFR_FLAGS(USE_FSR)
>  	},
>  	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512)
> +		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
> +		      SPI_NOR_BP3_SR_BIT6)
>  		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
>  		MFR_FLAGS(USE_FSR)
>  	},
  
Farber, Eliav Oct. 19, 2022, 9:25 a.m. UTC | #2
On 10/19/2022 11:21 AM, Michael Walle wrote:
> Hi,
>
> Am 2022-10-19 09:16, schrieb Eliav Farber:
>> n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id - 0x20bb19)
>> use the 4 bit Block Protection scheme and support Top/Bottom protection
>> via the BP and TB bits of the Status Register.
>> BP3 is located in bit 6 of the Status Register.
>> Tested on both n25q256ax1 and mt25qu256a.
>>
>> [1]
>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf 
>>
>> [2]
>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf 
>>
>
> If you respin, you can use a "Link:" tag for the URL above.

Ack.

>> Signed-off-by: Eliav Farber <farbere@amazon.com>
>> ---
>> xxd -p
>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>
>> 53464450060101ff00060110300000ff84000102800000ffffffffffffff
>> ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
>> 273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
>> 03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
>> ffffffffffffffffffe7ffff21dcffff
>>
>> md5sum
>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>
>> 5ea738216f68c9f98987bb3725699a32
>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>
>>
>> cat
>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id 
>>
>> 20bb19104400
>>
>> cat
>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname 
>>
>> mt25qu256a
>>
>> cat
>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer 
>>
>> st
>
> That's the mt25qu256a SFDP. What about the n25q256ax1? 

On the same card, with same NOR flash memory I'm running two different
kernel versions.
First version is quite old - 4.19.239 which does not support mt25qu256a
and therefore device is detected as n25q256ax1.
Second version is 6.1.0-rc1 and it detects the same device as mt25qu256a.
So I was able to dump SFDP when running version 6.1.0-rc1, but not when
running 4.19.239 which does not support the sysfs to dump the SFPD
information.
I checked that locking works with my changes when running on both kernel
versions.

--
Regards, Eliav
  
Michael Walle Oct. 19, 2022, 9:38 a.m. UTC | #3
Am 2022-10-19 11:25, schrieb Farber, Eliav:
> On 10/19/2022 11:21 AM, Michael Walle wrote:
>> Hi,
>> 
>> Am 2022-10-19 09:16, schrieb Eliav Farber:
>>> n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id - 
>>> 0x20bb19)
>>> use the 4 bit Block Protection scheme and support Top/Bottom 
>>> protection
>>> via the BP and TB bits of the Status Register.
>>> BP3 is located in bit 6 of the Status Register.
>>> Tested on both n25q256ax1 and mt25qu256a.
>>> 
>>> [1]
>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf 
>>> [2]
>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf
>> 
>> If you respin, you can use a "Link:" tag for the URL above.
> 
> Ack.
> 
>>> Signed-off-by: Eliav Farber <farbere@amazon.com>
>>> ---
>>> xxd -p
>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>> 53464450060101ff00060110300000ff84000102800000ffffffffffffff
>>> ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
>>> 273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
>>> 03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
>>> ffffffffffffffffffe7ffff21dcffff
>>> 
>>> md5sum
>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>> 5ea738216f68c9f98987bb3725699a32
>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>> cat
>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id 
>>> 20bb19104400
>>> 
>>> cat
>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname 
>>> mt25qu256a
>>> 
>>> cat
>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer 
>>> st
>> 
>> That's the mt25qu256a SFDP. What about the n25q256ax1?
> 
> On the same card, with same NOR flash memory I'm running two different
> kernel versions.
> First version is quite old - 4.19.239 which does not support mt25qu256a
> and therefore device is detected as n25q256ax1.
> Second version is 6.1.0-rc1 and it detects the same device as 
> mt25qu256a.
> So I was able to dump SFDP when running version 6.1.0-rc1, but not when
> running 4.19.239 which does not support the sysfs to dump the SFPD
> information.
> I checked that locking works with my changes when running on both 
> kernel
> versions.

So you've only tested on an mt25qu256a, correct? Then you should only
add the locking to this flash device. (and maybe backport the mt25qu256a
to your older kernel).

-michael
  
Farber, Eliav Oct. 19, 2022, 9:52 a.m. UTC | #4
On 10/19/2022 12:38 PM, Michael Walle wrote:
> Am 2022-10-19 11:25, schrieb Farber, Eliav:
>> On 10/19/2022 11:21 AM, Michael Walle wrote:
>>> Hi,
>>>
>>> Am 2022-10-19 09:16, schrieb Eliav Farber:
>>>> n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id -
>>>> 0x20bb19)
>>>> use the 4 bit Block Protection scheme and support Top/Bottom
>>>> protection
>>>> via the BP and TB bits of the Status Register.
>>>> BP3 is located in bit 6 of the Status Register.
>>>> Tested on both n25q256ax1 and mt25qu256a.
>>>>
>>>> [1]
>>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf 
>>>>
>>>> [2]
>>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf 
>>>>
>>>
>>> If you respin, you can use a "Link:" tag for the URL above.
>>
>> Ack.
>>
>>>> Signed-off-by: Eliav Farber <farbere@amazon.com>
>>>> ---
>>>> xxd -p
>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>
>>>> 53464450060101ff00060110300000ff84000102800000ffffffffffffff
>>>> ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
>>>> 273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
>>>> 03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
>>>> ffffffffffffffffffe7ffff21dcffff
>>>>
>>>> md5sum
>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>
>>>> 5ea738216f68c9f98987bb3725699a32
>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>
>>>> cat
>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id 
>>>>
>>>> 20bb19104400
>>>>
>>>> cat
>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname 
>>>>
>>>> mt25qu256a
>>>>
>>>> cat
>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer 
>>>>
>>>> st
>>>
>>> That's the mt25qu256a SFDP. What about the n25q256ax1?
>>
>> On the same card, with same NOR flash memory I'm running two different
>> kernel versions.
>> First version is quite old - 4.19.239 which does not support mt25qu256a
>> and therefore device is detected as n25q256ax1.
>> Second version is 6.1.0-rc1 and it detects the same device as
>> mt25qu256a.
>> So I was able to dump SFDP when running version 6.1.0-rc1, but not when
>> running 4.19.239 which does not support the sysfs to dump the SFPD
>> information.
>> I checked that locking works with my changes when running on both
>> kernel
>> versions.
>
> So you've only tested on an mt25qu256a, correct? Then you should only
> add the locking to this flash device. (and maybe backport the mt25qu256a
> to your older kernel). 

I dumped SFDP tables only for mt25qu256a, but as I mentioned I tested
locking functionality for both (on 4.19.239 which detects the device as
n25q256ax1 and on 6.1.0-rc1  which detects the device as mt25qu256a).
This is the flow I used for testing the change on both versions:

# flash_lock -i /dev/mtd0
fDevice: /dev/mtd0
Start: 0
lLen: 0x1000000
Lock status: unlocked
Return code: 0
# flash_lock -l /dev/mtd0
# flash_lock -i /dev/mtd0
fDevice: /dev/mtd0
Start: 0
Len: 0x1000000
Lock status: locked
Return code: 1
# flash_lock -u /dev/mtd0
# flash_lock -i /dev/mtd0
Device: /dev/mtd0
Start: 0
Len: 0x1000000
Lock status: unlocked

Do you still want this patch to change only mt25qu256a?

--
Regards, Eliav
  
Michael Walle Oct. 19, 2022, 10:23 a.m. UTC | #5
Am 2022-10-19 11:52, schrieb Farber, Eliav:
> On 10/19/2022 12:38 PM, Michael Walle wrote:
>> Am 2022-10-19 11:25, schrieb Farber, Eliav:
>>> On 10/19/2022 11:21 AM, Michael Walle wrote:
>>>> Hi,
>>>> 
>>>> Am 2022-10-19 09:16, schrieb Eliav Farber:
>>>>> n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id -
>>>>> 0x20bb19)
>>>>> use the 4 bit Block Protection scheme and support Top/Bottom
>>>>> protection
>>>>> via the BP and TB bits of the Status Register.
>>>>> BP3 is located in bit 6 of the Status Register.
>>>>> Tested on both n25q256ax1 and mt25qu256a.
>>>>> 
>>>>> [1]
>>>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf 
>>>>> [2]
>>>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf
>>>> 
>>>> If you respin, you can use a "Link:" tag for the URL above.
>>> 
>>> Ack.
>>> 
>>>>> Signed-off-by: Eliav Farber <farbere@amazon.com>
>>>>> ---
>>>>> xxd -p
>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>> 53464450060101ff00060110300000ff84000102800000ffffffffffffff
>>>>> ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
>>>>> 273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
>>>>> 03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
>>>>> ffffffffffffffffffe7ffff21dcffff
>>>>> 
>>>>> md5sum
>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>> 5ea738216f68c9f98987bb3725699a32
>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>> cat
>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id 
>>>>> 20bb19104400
>>>>> 
>>>>> cat
>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname 
>>>>> mt25qu256a
>>>>> 
>>>>> cat
>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer 
>>>>> st
>>>> 
>>>> That's the mt25qu256a SFDP. What about the n25q256ax1?
>>> 
>>> On the same card, with same NOR flash memory I'm running two 
>>> different
>>> kernel versions.
>>> First version is quite old - 4.19.239 which does not support 
>>> mt25qu256a
>>> and therefore device is detected as n25q256ax1.
>>> Second version is 6.1.0-rc1 and it detects the same device as
>>> mt25qu256a.
>>> So I was able to dump SFDP when running version 6.1.0-rc1, but not 
>>> when
>>> running 4.19.239 which does not support the sysfs to dump the SFPD
>>> information.
>>> I checked that locking works with my changes when running on both
>>> kernel
>>> versions.
>> 
>> So you've only tested on an mt25qu256a, correct? Then you should only
>> add the locking to this flash device. (and maybe backport the 
>> mt25qu256a
>> to your older kernel).
> 
> I dumped SFDP tables only for mt25qu256a, but as I mentioned I tested
> locking functionality for both (on 4.19.239 which detects the device as
> n25q256ax1 and on 6.1.0-rc1  which detects the device as mt25qu256a).
> This is the flow I used for testing the change on both versions:

You said you've tested on the same board, thus it has the same flash
device. But with the older kernel it was detected as a different part.

So the question is, what is the correct part number? I.e. what is the
_actual_ flash device soldered on your board?

-michael
  
Farber, Eliav Oct. 20, 2022, 9:15 a.m. UTC | #6
On 10/19/2022 1:23 PM, Michael Walle wrote:
> Am 2022-10-19 11:52, schrieb Farber, Eliav:
>> On 10/19/2022 12:38 PM, Michael Walle wrote:
>>> Am 2022-10-19 11:25, schrieb Farber, Eliav:
>>>> On 10/19/2022 11:21 AM, Michael Walle wrote:
>>>>> Hi,
>>>>>
>>>>> Am 2022-10-19 09:16, schrieb Eliav Farber:
>>>>>> n25q256ax1 [1] and mt25qu256a [2] (both have same jedec_id -
>>>>>> 0x20bb19)
>>>>>> use the 4 bit Block Protection scheme and support Top/Bottom
>>>>>> protection
>>>>>> via the BP and TB bits of the Status Register.
>>>>>> BP3 is located in bit 6 of the Status Register.
>>>>>> Tested on both n25q256ax1 and mt25qu256a.
>>>>>>
>>>>>> [1]
>>>>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf 
>>>>>>
>>>>>> [2]
>>>>>> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf 
>>>>>>
>>>>>
>>>>> If you respin, you can use a "Link:" tag for the URL above.
>>>>
>>>> Ack.
>>>>
>>>>>> Signed-off-by: Eliav Farber <farbere@amazon.com>
>>>>>> ---
>>>>>> xxd -p
>>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>>>
>>>>>> 53464450060101ff00060110300000ff84000102800000ffffffffffffff
>>>>>> ffffffffffffffffffffffffffffffffffffe520fbffffffff0f29eb276b
>>>>>> 273b27bbffffffffffff27bbffff29eb0c2010d80f520000244a99008b8e
>>>>>> 03d4ac0127387a757a75fbbdd55c4a0f82ff81bd3d36ffffffffffffffff
>>>>>> ffffffffffffffffffe7ffff21dcffff
>>>>>>
>>>>>> md5sum
>>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>>>
>>>>>> 5ea738216f68c9f98987bb3725699a32
>>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/sfdp 
>>>>>>
>>>>>> cat
>>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/jedec_id 
>>>>>>
>>>>>> 20bb19104400
>>>>>>
>>>>>> cat
>>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/partname 
>>>>>>
>>>>>> mt25qu256a
>>>>>>
>>>>>> cat
>>>>>> /sys/devices/platform/soc/fd882000.spi/spi_master/spi0/spi0.0/spi-nor/manufacturer 
>>>>>>
>>>>>> st
>>>>>
>>>>> That's the mt25qu256a SFDP. What about the n25q256ax1?
>>>>
>>>> On the same card, with same NOR flash memory I'm running two
>>>> different
>>>> kernel versions.
>>>> First version is quite old - 4.19.239 which does not support
>>>> mt25qu256a
>>>> and therefore device is detected as n25q256ax1.
>>>> Second version is 6.1.0-rc1 and it detects the same device as
>>>> mt25qu256a.
>>>> So I was able to dump SFDP when running version 6.1.0-rc1, but not
>>>> when
>>>> running 4.19.239 which does not support the sysfs to dump the SFPD
>>>> information.
>>>> I checked that locking works with my changes when running on both
>>>> kernel
>>>> versions.
>>>
>>> So you've only tested on an mt25qu256a, correct? Then you should only
>>> add the locking to this flash device. (and maybe backport the
>>> mt25qu256a
>>> to your older kernel).
>>
>> I dumped SFDP tables only for mt25qu256a, but as I mentioned I tested
>> locking functionality for both (on 4.19.239 which detects the device as
>> n25q256ax1 and on 6.1.0-rc1  which detects the device as mt25qu256a).
>> This is the flow I used for testing the change on both versions:
>
> You said you've tested on the same board, thus it has the same flash
> device. But with the older kernel it was detected as a different part.
>
> So the question is, what is the correct part number? I.e. what is the
> _actual_ flash device soldered on your board?

I have found out that we use MT25QU256ABA8ESF-0SIT so I'll release a
patch for mt25qu256a only.

--
Thanks, Eliav
  

Patch

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 3c9681a3f7a3..f4d0153a5b1b 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -201,11 +201,15 @@  static const struct flash_info st_nor_parts[] = {
 		MFR_FLAGS(USE_FSR)
 	},
 	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		MFR_FLAGS(USE_FSR)
 	},
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
 		MFR_FLAGS(USE_FSR)
 	},