[7/7] iommu: dart: Add t8110 DART support
Commit Message
Now that we have the driver properly parameterized, we can add support
for T8110 DARTs. These DARTs drop the multiple TTBRs (which only make
sense with legacy 4K page platforms) and instead add support for new
features and more stream IDs. The register layout is different, but the
pagetable format is the same as T6000.
Signed-off-by: Hector Martin <marcan@marcan.st>
---
drivers/iommu/apple-dart.c | 206 ++++++++++++++++++++++++++++++++++++-
1 file changed, 201 insertions(+), 5 deletions(-)
Comments
On Wed, Jan 4, 2023, at 12:00, Hector Martin wrote:
> Now that we have the driver properly parameterized, we can add support
> for T8110 DARTs. These DARTs drop the multiple TTBRs (which only make
> sense with legacy 4K page platforms) and instead add support for new
> features and more stream IDs. The register layout is different, but the
> pagetable format is the same as T6000.
>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
One minor nit below, otherwise
Reviewed-by: Sven Peter <sven@svenpeter.dev>
> drivers/iommu/apple-dart.c | 206 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 201 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
> index 396da83f2f9e..e9cbdb45448c 100644
> --- a/drivers/iommu/apple-dart.c
> +++ b/drivers/iommu/apple-dart.c
> @@ -85,6 +85,62 @@
> #define DART_T8020_TTBR_ADDR_OFF 0
> #define DART_T8020_TTBR_SHIFT 12
>
> +/* T8110 registers */
> +
> +#define DART_T8110_PARAMS3 0x08
> +#define DART_T8110_PARAMS3_PA_WIDTH GENMASK(29, 24)
> +#define DART_T8110_PARAMS3_VA_WIDTH GENMASK(21, 16)
> +#define DART_T8110_PARAMS3_VER_MAJ GENMASK(15, 8)
> +#define DART_T8110_PARAMS3_VER_MIN GENMASK(7, 0)
> +
> +#define DART_T8110_PARAMS4 0x0c
> +#define DART_T8110_PARAMS4_NUM_CLIENTS GENMASK(24, 16)
> +#define DART_T8110_PARAMS4_NUM_SIDS GENMASK(8, 0)
> +
> +#define DART_T8110_TLB_CMD 0x80
> +#define DART_T8110_TLB_CMD_BUSY BIT(31)
> +#define DART_T8110_TLB_CMD_OP GENMASK(10, 8)
> +#define DART_T8110_TLB_CMD_OP_FLUSH_ALL 0
> +#define DART_T8110_TLB_CMD_OP_FLUSH_SID 1
> +#define DART_T8110_TLB_CMD_STREAM GENMASK(7, 0)
> +
> +#define DART_T8110_ERROR 0x100
> +#define DART_T8110_ERROR_STREAM GENMASK(27, 20)
> +#define DART_T8110_ERROR_CODE GENMASK(14, 0)
> +#define DART_T8110_ERROR_FLAG BIT(31)
> +
> +#define DART_T8110_ERROR_MASK 0x104
> +
> +#define DART_T8110_ERROR_READ_FAULT BIT(4)
> +#define DART_T8110_ERROR_WRITE_FAULT BIT(3)
> +#define DART_T8110_ERROR_NO_PTE BIT(3)
> +#define DART_T8110_ERROR_NO_PMD BIT(2)
> +#define DART_T8110_ERROR_NO_PGD BIT(1)
> +#define DART_T8110_ERROR_NO_TTBR BIT(0)
> +
> +#define DART_T8110_ERROR_ADDR_LO 0x170
> +#define DART_T8110_ERROR_ADDR_HI 0x174
> +
> +#define DART_T8110_PROTECT 0x200
> +#define DART_T8110_UNPROTECT 0x204
> +#define DART_T8110_PROTECT_LOCK 0x208
> +#define DART_T8110_PROTECT_TTBR_TCR BIT(0)
Do you have any more details on this registers? For the 8103 DART
we called it _CONFIG but I assume for the t8110 DART it can
actually lock different parts of the HW instead of just a global lock?
> +
> +#define DART_T8110_ENABLE_STREAMS 0xc00
> +#define DART_T8110_DISABLE_STREAMS 0xc20
> +
> +#define DART_T8110_TCR 0x1000
> +#define DART_T8110_TCR_REMAP GENMASK(11, 8)
> +#define DART_T8110_TCR_REMAP_EN BIT(7)
> +#define DART_T8110_TCR_BYPASS_DAPF BIT(2)
> +#define DART_T8110_TCR_BYPASS_DART BIT(1)
> +#define DART_T8110_TCR_TRANSLATE_ENABLE BIT(0)
> +
> +#define DART_T8110_TTBR 0x1400
> +#define DART_T8110_TTBR_VALID BIT(0)
> +#define DART_T8110_TTBR_ADDR_OFF 2
> +#define DART_T8110_TTBR_SHIFT 14
> +
> #define DART_TCR(dart, sid) ((dart)->hw->tcr + ((sid) << 2))
>
> #define DART_TTBR(dart, sid, idx) ((dart)->hw->ttbr + \
> @@ -93,7 +149,14 @@
>
> struct apple_dart_stream_map;
>
> +enum dart_type {
Minor nit: enum apple_dart_type to be consistent with the rest of the driver.
> + DART_T8020,
> + DART_T6000,
> + DART_T8110,
> +};
> +
> struct apple_dart_hw {
> + enum dart_type type;
> irqreturn_t (*irq_handler)(int irq, void *dev);
> int (*invalidate_tlb)(struct apple_dart_stream_map *stream_map);
>
> @@ -150,6 +213,8 @@ struct apple_dart {
>
> spinlock_t lock;
>
> + u32 ias;
> + u32 oas;
> u32 pgsize;
> u32 num_streams;
> u32 supports_bypass : 1;
> @@ -331,6 +396,44 @@ apple_dart_t8020_hw_stream_command(struct
> apple_dart_stream_map *stream_map,
> return 0;
> }
>
> +static int
> +apple_dart_t8110_hw_tlb_command(struct apple_dart_stream_map
> *stream_map,
> + u32 command)
> +{
> + struct apple_dart *dart = stream_map->dart;
> + unsigned long flags;
> + int ret = 0;
> + int sid;
> +
> + spin_lock_irqsave(&dart->lock, flags);
> +
> + for_each_set_bit(sid, stream_map->sidmap, dart->num_streams) {
> + u32 val = FIELD_PREP(DART_T8110_TLB_CMD_OP, command) |
> + FIELD_PREP(DART_T8110_TLB_CMD_STREAM, sid);
> + writel(val, dart->regs + DART_T8110_TLB_CMD);
> +
> + ret = readl_poll_timeout_atomic(
> + dart->regs + DART_T8110_TLB_CMD, val,
> + !(val & DART_T8110_TLB_CMD_BUSY), 1,
> + DART_STREAM_COMMAND_BUSY_TIMEOUT);
> +
> + if (ret)
> + break;
> +
> + }
> +
> + spin_unlock_irqrestore(&dart->lock, flags);
> +
> + if (ret) {
> + dev_err(stream_map->dart->dev,
> + "busy bit did not clear after command %x for stream %d\n",
> + command, sid);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static int
> apple_dart_t8020_hw_invalidate_tlb(struct apple_dart_stream_map
> *stream_map)
> {
> @@ -338,6 +441,13 @@ apple_dart_t8020_hw_invalidate_tlb(struct
> apple_dart_stream_map *stream_map)
> stream_map, DART_T8020_STREAM_COMMAND_INVALIDATE);
> }
>
> +static int
> +apple_dart_t8110_hw_invalidate_tlb(struct apple_dart_stream_map *stream_map)
> +{
> + return apple_dart_t8110_hw_tlb_command(
> + stream_map, DART_T8110_TLB_CMD_OP_FLUSH_SID);
> +}
> +
> static int apple_dart_hw_reset(struct apple_dart *dart)
> {
> u32 config;
> @@ -364,6 +474,9 @@ static int apple_dart_hw_reset(struct apple_dart *dart)
> /* clear any pending errors before the interrupt is unmasked */
> writel(readl(dart->regs + dart->hw->error), dart->regs + dart->hw->error);
>
> + if (dart->hw->type == DART_T8110)
> + writel(0, dart->regs + DART_T8110_ERROR_MASK);
> +
> return dart->hw->invalidate_tlb(&stream_map);
> }
>
> @@ -479,8 +592,8 @@ static int apple_dart_finalize_domain(struct
> iommu_domain *domain,
>
> pgtbl_cfg = (struct io_pgtable_cfg){
> .pgsize_bitmap = dart->pgsize,
> - .ias = 32,
> - .oas = dart->hw->oas,
> + .ias = dart->ias,
> + .oas = dart->oas,
> .coherent_walk = 1,
> .iommu_dev = dart->dev,
> };
> @@ -494,7 +607,7 @@ static int apple_dart_finalize_domain(struct
> iommu_domain *domain,
>
> domain->pgsize_bitmap = pgtbl_cfg.pgsize_bitmap;
> domain->geometry.aperture_start = 0;
> - domain->geometry.aperture_end = DMA_BIT_MASK(32);
> + domain->geometry.aperture_end = DMA_BIT_MASK(dart->ias);
> domain->geometry.force_aperture = true;
>
> dart_domain->finalized = true;
> @@ -881,10 +994,49 @@ static irqreturn_t apple_dart_t8020_irq(int irq,
> void *dev)
> return IRQ_HANDLED;
> }
>
> +static irqreturn_t apple_dart_t8110_irq(int irq, void *dev)
> +{
> + struct apple_dart *dart = dev;
> + const char *fault_name = NULL;
> + u32 error = readl(dart->regs + DART_T8110_ERROR);
> + u32 error_code = FIELD_GET(DART_T8110_ERROR_CODE, error);
> + u32 addr_lo = readl(dart->regs + DART_T8110_ERROR_ADDR_LO);
> + u32 addr_hi = readl(dart->regs + DART_T8110_ERROR_ADDR_HI);
> + u64 addr = addr_lo | (((u64)addr_hi) << 32);
> + u8 stream_idx = FIELD_GET(DART_T8110_ERROR_STREAM, error);
> +
> + if (!(error & DART_T8110_ERROR_FLAG))
> + return IRQ_NONE;
> +
> + /* there should only be a single bit set but let's use == to be sure */
> + if (error_code == DART_T8110_ERROR_READ_FAULT)
> + fault_name = "READ FAULT";
> + else if (error_code == DART_T8110_ERROR_WRITE_FAULT)
> + fault_name = "WRITE FAULT";
> + else if (error_code == DART_T8110_ERROR_NO_PTE)
> + fault_name = "NO PTE FOR IOVA";
> + else if (error_code == DART_T8110_ERROR_NO_PMD)
> + fault_name = "NO PMD FOR IOVA";
> + else if (error_code == DART_T8110_ERROR_NO_PGD)
> + fault_name = "NO PGD FOR IOVA";
> + else if (error_code == DART_T8110_ERROR_NO_TTBR)
> + fault_name = "NO TTBR FOR IOVA";
> + else
> + fault_name = "unknown";
> +
> + dev_err_ratelimited(
> + dart->dev,
> + "translation fault: status:0x%x stream:%d code:0x%x (%s) at 0x%llx",
> + error, stream_idx, error_code, fault_name, addr);
> +
> + writel(error, dart->regs + DART_T8110_ERROR);
> + return IRQ_HANDLED;
> +}
> +
> static int apple_dart_probe(struct platform_device *pdev)
> {
> int ret;
> - u32 dart_params[2];
> + u32 dart_params[4];
> struct resource *res;
> struct apple_dart *dart;
> struct device *dev = &pdev->dev;
> @@ -924,7 +1076,22 @@ static int apple_dart_probe(struct platform_device *pdev)
> dart->pgsize = 1 << FIELD_GET(DART_PARAMS1_PAGE_SHIFT, dart_params[0]);
> dart->supports_bypass = dart_params[1] & DART_PARAMS2_BYPASS_SUPPORT;
>
> - dart->num_streams = dart->hw->max_sid_count;
> + switch (dart->hw->type) {
> + case DART_T8020:
> + case DART_T6000:
> + dart->ias = 32;
> + dart->oas = dart->hw->oas;
> + dart->num_streams = dart->hw->max_sid_count;
> + break;
> +
> + case DART_T8110:
> + dart_params[2] = readl(dart->regs + DART_T8110_PARAMS3);
> + dart_params[3] = readl(dart->regs + DART_T8110_PARAMS4);
> + dart->ias = FIELD_GET(DART_T8110_PARAMS3_VA_WIDTH, dart_params[2]);
> + dart->oas = FIELD_GET(DART_T8110_PARAMS3_PA_WIDTH, dart_params[2]);
> + dart->num_streams = FIELD_GET(DART_T8110_PARAMS4_NUM_SIDS, dart_params[3]);
> + break;
> + }
>
> if (dart->num_streams > DART_MAX_STREAMS) {
> dev_err(&pdev->dev, "Too many streams (%d > %d)\n",
> @@ -987,6 +1154,7 @@ static int apple_dart_remove(struct platform_device *pdev)
> }
>
> static const struct apple_dart_hw apple_dart_hw_t8103 = {
> + .type = DART_T8020,
> .irq_handler = apple_dart_t8020_irq,
> .invalidate_tlb = apple_dart_t8020_hw_invalidate_tlb,
> .oas = 36,
> @@ -1011,6 +1179,7 @@ static const struct apple_dart_hw apple_dart_hw_t8103 = {
> .ttbr_count = 4,
> };
> static const struct apple_dart_hw apple_dart_hw_t6000 = {
> + .type = DART_T6000,
> .irq_handler = apple_dart_t8020_irq,
> .invalidate_tlb = apple_dart_t8020_hw_invalidate_tlb,
> .oas = 42,
> @@ -1035,6 +1204,32 @@ static const struct apple_dart_hw apple_dart_hw_t6000 = {
> .ttbr_count = 4,
> };
>
> +static const struct apple_dart_hw apple_dart_hw_t8110 = {
> + .type = DART_T8110,
> + .irq_handler = apple_dart_t8110_irq,
> + .invalidate_tlb = apple_dart_t8110_hw_invalidate_tlb,
> + .fmt = APPLE_DART2,
> + .max_sid_count = 256,
> +
> + .enable_streams = DART_T8110_ENABLE_STREAMS,
> + .disable_streams = DART_T8110_DISABLE_STREAMS,
> + .lock = DART_T8110_PROTECT,
> + .lock_bit = DART_T8110_PROTECT_TTBR_TCR,
> +
> + .error = DART_T8110_ERROR,
> +
> + .tcr = DART_T8110_TCR,
> + .tcr_enabled = DART_T8110_TCR_TRANSLATE_ENABLE,
> + .tcr_disabled = 0,
> + .tcr_bypass = DART_T8110_TCR_BYPASS_DAPF | DART_T8110_TCR_BYPASS_DART,
> +
> + .ttbr = DART_T8110_TTBR,
> + .ttbr_valid = DART_T8110_TTBR_VALID,
> + .ttbr_addr_off = DART_T8110_TTBR_ADDR_OFF,
> + .ttbr_shift = DART_T8110_TTBR_SHIFT,
> + .ttbr_count = 1,
> +};
> +
> static __maybe_unused int apple_dart_suspend(struct device *dev)
> {
> struct apple_dart *dart = dev_get_drvdata(dev);
> @@ -1076,6 +1271,7 @@ DEFINE_SIMPLE_DEV_PM_OPS(apple_dart_pm_ops,
> apple_dart_suspend, apple_dart_resum
>
> static const struct of_device_id apple_dart_of_match[] = {
> { .compatible = "apple,t8103-dart", .data = &apple_dart_hw_t8103 },
> + { .compatible = "apple,t8110-dart", .data = &apple_dart_hw_t8110 },
> { .compatible = "apple,t6000-dart", .data = &apple_dart_hw_t6000 },
> {},
> };
> --
> 2.35.1
On 2023/01/04 22:50, Sven Peter wrote:
> Do you have any more details on this registers? For the 8103 DART
> we called it _CONFIG but I assume for the t8110 DART it can
> actually lock different parts of the HW instead of just a global lock?
This is based on R's reverse engineering here:
https://github.com/AsahiLinux/m1n1/blob/main/proxyclient/m1n1/hw/dart8110.py#L87
I don't think they ever fully nailed down exactly what the lock bit
behavior is, though.
- Hector
Hi,
On Thu, Jan 5, 2023, at 06:19, Hector Martin wrote:
> On 2023/01/04 22:50, Sven Peter wrote:
>> Do you have any more details on this registers? For the 8103 DART
>> we called it _CONFIG but I assume for the t8110 DART it can
>> actually lock different parts of the HW instead of just a global lock?
>
> This is based on R's reverse engineering here:
>
> https://github.com/AsahiLinux/m1n1/blob/main/proxyclient/m1n1/hw/dart8110.py#L87
>
> I don't think they ever fully nailed down exactly what the lock bit
> behavior is, though.
Fair enough, I was mostly curious if it was actually _PROTECT and not just
_CONFIG with different bit assignments. Sounds like it does mostly set up
protections though.
Sven
@@ -85,6 +85,62 @@
#define DART_T8020_TTBR_ADDR_OFF 0
#define DART_T8020_TTBR_SHIFT 12
+/* T8110 registers */
+
+#define DART_T8110_PARAMS3 0x08
+#define DART_T8110_PARAMS3_PA_WIDTH GENMASK(29, 24)
+#define DART_T8110_PARAMS3_VA_WIDTH GENMASK(21, 16)
+#define DART_T8110_PARAMS3_VER_MAJ GENMASK(15, 8)
+#define DART_T8110_PARAMS3_VER_MIN GENMASK(7, 0)
+
+#define DART_T8110_PARAMS4 0x0c
+#define DART_T8110_PARAMS4_NUM_CLIENTS GENMASK(24, 16)
+#define DART_T8110_PARAMS4_NUM_SIDS GENMASK(8, 0)
+
+#define DART_T8110_TLB_CMD 0x80
+#define DART_T8110_TLB_CMD_BUSY BIT(31)
+#define DART_T8110_TLB_CMD_OP GENMASK(10, 8)
+#define DART_T8110_TLB_CMD_OP_FLUSH_ALL 0
+#define DART_T8110_TLB_CMD_OP_FLUSH_SID 1
+#define DART_T8110_TLB_CMD_STREAM GENMASK(7, 0)
+
+#define DART_T8110_ERROR 0x100
+#define DART_T8110_ERROR_STREAM GENMASK(27, 20)
+#define DART_T8110_ERROR_CODE GENMASK(14, 0)
+#define DART_T8110_ERROR_FLAG BIT(31)
+
+#define DART_T8110_ERROR_MASK 0x104
+
+#define DART_T8110_ERROR_READ_FAULT BIT(4)
+#define DART_T8110_ERROR_WRITE_FAULT BIT(3)
+#define DART_T8110_ERROR_NO_PTE BIT(3)
+#define DART_T8110_ERROR_NO_PMD BIT(2)
+#define DART_T8110_ERROR_NO_PGD BIT(1)
+#define DART_T8110_ERROR_NO_TTBR BIT(0)
+
+#define DART_T8110_ERROR_ADDR_LO 0x170
+#define DART_T8110_ERROR_ADDR_HI 0x174
+
+#define DART_T8110_PROTECT 0x200
+#define DART_T8110_UNPROTECT 0x204
+#define DART_T8110_PROTECT_LOCK 0x208
+#define DART_T8110_PROTECT_TTBR_TCR BIT(0)
+
+#define DART_T8110_ENABLE_STREAMS 0xc00
+#define DART_T8110_DISABLE_STREAMS 0xc20
+
+#define DART_T8110_TCR 0x1000
+#define DART_T8110_TCR_REMAP GENMASK(11, 8)
+#define DART_T8110_TCR_REMAP_EN BIT(7)
+#define DART_T8110_TCR_BYPASS_DAPF BIT(2)
+#define DART_T8110_TCR_BYPASS_DART BIT(1)
+#define DART_T8110_TCR_TRANSLATE_ENABLE BIT(0)
+
+#define DART_T8110_TTBR 0x1400
+#define DART_T8110_TTBR_VALID BIT(0)
+#define DART_T8110_TTBR_ADDR_OFF 2
+#define DART_T8110_TTBR_SHIFT 14
+
#define DART_TCR(dart, sid) ((dart)->hw->tcr + ((sid) << 2))
#define DART_TTBR(dart, sid, idx) ((dart)->hw->ttbr + \
@@ -93,7 +149,14 @@
struct apple_dart_stream_map;
+enum dart_type {
+ DART_T8020,
+ DART_T6000,
+ DART_T8110,
+};
+
struct apple_dart_hw {
+ enum dart_type type;
irqreturn_t (*irq_handler)(int irq, void *dev);
int (*invalidate_tlb)(struct apple_dart_stream_map *stream_map);
@@ -150,6 +213,8 @@ struct apple_dart {
spinlock_t lock;
+ u32 ias;
+ u32 oas;
u32 pgsize;
u32 num_streams;
u32 supports_bypass : 1;
@@ -331,6 +396,44 @@ apple_dart_t8020_hw_stream_command(struct apple_dart_stream_map *stream_map,
return 0;
}
+static int
+apple_dart_t8110_hw_tlb_command(struct apple_dart_stream_map *stream_map,
+ u32 command)
+{
+ struct apple_dart *dart = stream_map->dart;
+ unsigned long flags;
+ int ret = 0;
+ int sid;
+
+ spin_lock_irqsave(&dart->lock, flags);
+
+ for_each_set_bit(sid, stream_map->sidmap, dart->num_streams) {
+ u32 val = FIELD_PREP(DART_T8110_TLB_CMD_OP, command) |
+ FIELD_PREP(DART_T8110_TLB_CMD_STREAM, sid);
+ writel(val, dart->regs + DART_T8110_TLB_CMD);
+
+ ret = readl_poll_timeout_atomic(
+ dart->regs + DART_T8110_TLB_CMD, val,
+ !(val & DART_T8110_TLB_CMD_BUSY), 1,
+ DART_STREAM_COMMAND_BUSY_TIMEOUT);
+
+ if (ret)
+ break;
+
+ }
+
+ spin_unlock_irqrestore(&dart->lock, flags);
+
+ if (ret) {
+ dev_err(stream_map->dart->dev,
+ "busy bit did not clear after command %x for stream %d\n",
+ command, sid);
+ return ret;
+ }
+
+ return 0;
+}
+
static int
apple_dart_t8020_hw_invalidate_tlb(struct apple_dart_stream_map *stream_map)
{
@@ -338,6 +441,13 @@ apple_dart_t8020_hw_invalidate_tlb(struct apple_dart_stream_map *stream_map)
stream_map, DART_T8020_STREAM_COMMAND_INVALIDATE);
}
+static int
+apple_dart_t8110_hw_invalidate_tlb(struct apple_dart_stream_map *stream_map)
+{
+ return apple_dart_t8110_hw_tlb_command(
+ stream_map, DART_T8110_TLB_CMD_OP_FLUSH_SID);
+}
+
static int apple_dart_hw_reset(struct apple_dart *dart)
{
u32 config;
@@ -364,6 +474,9 @@ static int apple_dart_hw_reset(struct apple_dart *dart)
/* clear any pending errors before the interrupt is unmasked */
writel(readl(dart->regs + dart->hw->error), dart->regs + dart->hw->error);
+ if (dart->hw->type == DART_T8110)
+ writel(0, dart->regs + DART_T8110_ERROR_MASK);
+
return dart->hw->invalidate_tlb(&stream_map);
}
@@ -479,8 +592,8 @@ static int apple_dart_finalize_domain(struct iommu_domain *domain,
pgtbl_cfg = (struct io_pgtable_cfg){
.pgsize_bitmap = dart->pgsize,
- .ias = 32,
- .oas = dart->hw->oas,
+ .ias = dart->ias,
+ .oas = dart->oas,
.coherent_walk = 1,
.iommu_dev = dart->dev,
};
@@ -494,7 +607,7 @@ static int apple_dart_finalize_domain(struct iommu_domain *domain,
domain->pgsize_bitmap = pgtbl_cfg.pgsize_bitmap;
domain->geometry.aperture_start = 0;
- domain->geometry.aperture_end = DMA_BIT_MASK(32);
+ domain->geometry.aperture_end = DMA_BIT_MASK(dart->ias);
domain->geometry.force_aperture = true;
dart_domain->finalized = true;
@@ -881,10 +994,49 @@ static irqreturn_t apple_dart_t8020_irq(int irq, void *dev)
return IRQ_HANDLED;
}
+static irqreturn_t apple_dart_t8110_irq(int irq, void *dev)
+{
+ struct apple_dart *dart = dev;
+ const char *fault_name = NULL;
+ u32 error = readl(dart->regs + DART_T8110_ERROR);
+ u32 error_code = FIELD_GET(DART_T8110_ERROR_CODE, error);
+ u32 addr_lo = readl(dart->regs + DART_T8110_ERROR_ADDR_LO);
+ u32 addr_hi = readl(dart->regs + DART_T8110_ERROR_ADDR_HI);
+ u64 addr = addr_lo | (((u64)addr_hi) << 32);
+ u8 stream_idx = FIELD_GET(DART_T8110_ERROR_STREAM, error);
+
+ if (!(error & DART_T8110_ERROR_FLAG))
+ return IRQ_NONE;
+
+ /* there should only be a single bit set but let's use == to be sure */
+ if (error_code == DART_T8110_ERROR_READ_FAULT)
+ fault_name = "READ FAULT";
+ else if (error_code == DART_T8110_ERROR_WRITE_FAULT)
+ fault_name = "WRITE FAULT";
+ else if (error_code == DART_T8110_ERROR_NO_PTE)
+ fault_name = "NO PTE FOR IOVA";
+ else if (error_code == DART_T8110_ERROR_NO_PMD)
+ fault_name = "NO PMD FOR IOVA";
+ else if (error_code == DART_T8110_ERROR_NO_PGD)
+ fault_name = "NO PGD FOR IOVA";
+ else if (error_code == DART_T8110_ERROR_NO_TTBR)
+ fault_name = "NO TTBR FOR IOVA";
+ else
+ fault_name = "unknown";
+
+ dev_err_ratelimited(
+ dart->dev,
+ "translation fault: status:0x%x stream:%d code:0x%x (%s) at 0x%llx",
+ error, stream_idx, error_code, fault_name, addr);
+
+ writel(error, dart->regs + DART_T8110_ERROR);
+ return IRQ_HANDLED;
+}
+
static int apple_dart_probe(struct platform_device *pdev)
{
int ret;
- u32 dart_params[2];
+ u32 dart_params[4];
struct resource *res;
struct apple_dart *dart;
struct device *dev = &pdev->dev;
@@ -924,7 +1076,22 @@ static int apple_dart_probe(struct platform_device *pdev)
dart->pgsize = 1 << FIELD_GET(DART_PARAMS1_PAGE_SHIFT, dart_params[0]);
dart->supports_bypass = dart_params[1] & DART_PARAMS2_BYPASS_SUPPORT;
- dart->num_streams = dart->hw->max_sid_count;
+ switch (dart->hw->type) {
+ case DART_T8020:
+ case DART_T6000:
+ dart->ias = 32;
+ dart->oas = dart->hw->oas;
+ dart->num_streams = dart->hw->max_sid_count;
+ break;
+
+ case DART_T8110:
+ dart_params[2] = readl(dart->regs + DART_T8110_PARAMS3);
+ dart_params[3] = readl(dart->regs + DART_T8110_PARAMS4);
+ dart->ias = FIELD_GET(DART_T8110_PARAMS3_VA_WIDTH, dart_params[2]);
+ dart->oas = FIELD_GET(DART_T8110_PARAMS3_PA_WIDTH, dart_params[2]);
+ dart->num_streams = FIELD_GET(DART_T8110_PARAMS4_NUM_SIDS, dart_params[3]);
+ break;
+ }
if (dart->num_streams > DART_MAX_STREAMS) {
dev_err(&pdev->dev, "Too many streams (%d > %d)\n",
@@ -987,6 +1154,7 @@ static int apple_dart_remove(struct platform_device *pdev)
}
static const struct apple_dart_hw apple_dart_hw_t8103 = {
+ .type = DART_T8020,
.irq_handler = apple_dart_t8020_irq,
.invalidate_tlb = apple_dart_t8020_hw_invalidate_tlb,
.oas = 36,
@@ -1011,6 +1179,7 @@ static const struct apple_dart_hw apple_dart_hw_t8103 = {
.ttbr_count = 4,
};
static const struct apple_dart_hw apple_dart_hw_t6000 = {
+ .type = DART_T6000,
.irq_handler = apple_dart_t8020_irq,
.invalidate_tlb = apple_dart_t8020_hw_invalidate_tlb,
.oas = 42,
@@ -1035,6 +1204,32 @@ static const struct apple_dart_hw apple_dart_hw_t6000 = {
.ttbr_count = 4,
};
+static const struct apple_dart_hw apple_dart_hw_t8110 = {
+ .type = DART_T8110,
+ .irq_handler = apple_dart_t8110_irq,
+ .invalidate_tlb = apple_dart_t8110_hw_invalidate_tlb,
+ .fmt = APPLE_DART2,
+ .max_sid_count = 256,
+
+ .enable_streams = DART_T8110_ENABLE_STREAMS,
+ .disable_streams = DART_T8110_DISABLE_STREAMS,
+ .lock = DART_T8110_PROTECT,
+ .lock_bit = DART_T8110_PROTECT_TTBR_TCR,
+
+ .error = DART_T8110_ERROR,
+
+ .tcr = DART_T8110_TCR,
+ .tcr_enabled = DART_T8110_TCR_TRANSLATE_ENABLE,
+ .tcr_disabled = 0,
+ .tcr_bypass = DART_T8110_TCR_BYPASS_DAPF | DART_T8110_TCR_BYPASS_DART,
+
+ .ttbr = DART_T8110_TTBR,
+ .ttbr_valid = DART_T8110_TTBR_VALID,
+ .ttbr_addr_off = DART_T8110_TTBR_ADDR_OFF,
+ .ttbr_shift = DART_T8110_TTBR_SHIFT,
+ .ttbr_count = 1,
+};
+
static __maybe_unused int apple_dart_suspend(struct device *dev)
{
struct apple_dart *dart = dev_get_drvdata(dev);
@@ -1076,6 +1271,7 @@ DEFINE_SIMPLE_DEV_PM_OPS(apple_dart_pm_ops, apple_dart_suspend, apple_dart_resum
static const struct of_device_id apple_dart_of_match[] = {
{ .compatible = "apple,t8103-dart", .data = &apple_dart_hw_t8103 },
+ { .compatible = "apple,t8110-dart", .data = &apple_dart_hw_t8110 },
{ .compatible = "apple,t6000-dart", .data = &apple_dart_hw_t6000 },
{},
};