[v2,6/6] arm64: dts: qcom: sm8250: clean up wcd938x codec node
Commit Message
Clean up the wcd938x codec node somewhat by adding newline separators,
reordering properties and renaming it 'audio-codec'.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
Comments
On 3.01.2023 11:31, Johan Hovold wrote:
> Clean up the wcd938x codec node somewhat by adding newline separators,
> reordering properties and renaming it 'audio-codec'.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 16 ++++++++++------
> 1 file changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> index b741b7da1afc..0991b34a8e49 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> @@ -23,18 +23,16 @@ aliases {
> serial0 = &uart12;
> };
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - wcd938x: codec {
> + wcd938x: audio-codec {
> compatible = "qcom,wcd9380-codec";
> - #sound-dai-cells = <1>;
> +
> reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
> +
> vdd-buck-supply = <&vreg_s4a_1p8>;
> vdd-rxtx-supply = <&vreg_s4a_1p8>;
> vdd-io-supply = <&vreg_s4a_1p8>;
> vdd-mic-bias-supply = <&vreg_bob>;
> +
> qcom,micbias1-microvolt = <1800000>;
> qcom,micbias2-microvolt = <1800000>;
> qcom,micbias3-microvolt = <1800000>;
> @@ -44,6 +42,12 @@ wcd938x: codec {
> qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> qcom,rx-device = <&wcd_rx>;
> qcom,tx-device = <&wcd_tx>;
> +
> + #sound-dai-cells = <1>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> };
>
> thermal-zones {
@@ -23,18 +23,16 @@ aliases {
serial0 = &uart12;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- wcd938x: codec {
+ wcd938x: audio-codec {
compatible = "qcom,wcd9380-codec";
- #sound-dai-cells = <1>;
+
reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-rxtx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
vdd-mic-bias-supply = <&vreg_bob>;
+
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
@@ -44,6 +42,12 @@ wcd938x: codec {
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
thermal-zones {