[5/6] arm64: dts: qcom: sm8250-mtp: fix wcd938x codec node

Message ID 20230102105038.8074-6-johan+linaro@kernel.org
State New
Headers
Series arm64: dts: qcom: disable x13s sound + cleanups |

Commit Message

Johan Hovold Jan. 2, 2023, 10:50 a.m. UTC
  The wcd938x codec is not a memory-mapped device and does not belong
under the soc node.

Move the node to the root node to avoid DT validation failures.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
 1 file changed, 19 insertions(+), 21 deletions(-)
  

Comments

Konrad Dybcio Jan. 2, 2023, 11:15 a.m. UTC | #1
On 2.01.2023 11:50, Johan Hovold wrote:
> The wcd938x codec is not a memory-mapped device and does not belong
> under the soc node.
> 
> Move the node to the root node to avoid DT validation failures.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Could you rename it to audio-codec and separate/sort the properties
like you did for x13s?

Konrad

>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
>  1 file changed, 19 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> index 3ed8c84e25b8..ea43dbdc3671 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> @@ -23,6 +23,25 @@ aliases {
>  		serial0 = &uart12;
>  	};
>  
> +	wcd938x: codec {
> +		compatible = "qcom,wcd9380-codec";
> +		#sound-dai-cells = <1>;
> +		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
> +		vdd-buck-supply = <&vreg_s4a_1p8>;
> +		vdd-rxtx-supply = <&vreg_s4a_1p8>;
> +		vdd-io-supply = <&vreg_s4a_1p8>;
> +		vdd-mic-bias-supply = <&vreg_bob>;
> +		qcom,micbias1-microvolt = <1800000>;
> +		qcom,micbias2-microvolt = <1800000>;
> +		qcom,micbias3-microvolt = <1800000>;
> +		qcom,micbias4-microvolt = <1800000>;
> +		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> +		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> +		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> +		qcom,rx-device = <&wcd_rx>;
> +		qcom,tx-device = <&wcd_tx>;
> +	};
> +
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> @@ -631,27 +650,6 @@ &slpi {
>  	firmware-name = "qcom/sm8250/slpi.mbn";
>  };
>  
> -&soc {
> -	wcd938x: codec {
> -		compatible = "qcom,wcd9380-codec";
> -		#sound-dai-cells = <1>;
> -		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
> -		vdd-buck-supply = <&vreg_s4a_1p8>;
> -		vdd-rxtx-supply = <&vreg_s4a_1p8>;
> -		vdd-io-supply = <&vreg_s4a_1p8>;
> -		vdd-mic-bias-supply = <&vreg_bob>;
> -		qcom,micbias1-microvolt = <1800000>;
> -		qcom,micbias2-microvolt = <1800000>;
> -		qcom,micbias3-microvolt = <1800000>;
> -		qcom,micbias4-microvolt = <1800000>;
> -		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> -		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> -		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> -		qcom,rx-device = <&wcd_rx>;
> -		qcom,tx-device = <&wcd_tx>;
> -	};
> -};
> -
>  &sound {
>  	compatible = "qcom,sm8250-sndcard";
>  	model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
  
Johan Hovold Jan. 2, 2023, 11:22 a.m. UTC | #2
On Mon, Jan 02, 2023 at 12:15:50PM +0100, Konrad Dybcio wrote:
> 
> 
> On 2.01.2023 11:50, Johan Hovold wrote:
> > The wcd938x codec is not a memory-mapped device and does not belong
> > under the soc node.
> > 
> > Move the node to the root node to avoid DT validation failures.
> > 
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> Could you rename it to audio-codec and separate/sort the properties
> like you did for x13s?

Possibly, but unlike for sc8280xp, I don't really care about these
platforms and how their DT authors have chosen to order properties so I
left out the clean up bits on purpose.

Johan
  
Krzysztof Kozlowski Jan. 2, 2023, 12:20 p.m. UTC | #3
On 02/01/2023 11:50, Johan Hovold wrote:
> The wcd938x codec is not a memory-mapped device and does not belong
> under the soc node.
> 
> Move the node to the root node to avoid DT validation failures.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
>  1 file changed, 19 insertions(+), 21 deletions(-)

Don't you base on some older tree? It was alreadt moved. Maybe other
changes were also implemented...

Best regards,
Krzysztof
  
Johan Hovold Jan. 2, 2023, 3:03 p.m. UTC | #4
On Mon, Jan 02, 2023 at 01:20:03PM +0100, Krzysztof Kozlowski wrote:
> On 02/01/2023 11:50, Johan Hovold wrote:
> > The wcd938x codec is not a memory-mapped device and does not belong
> > under the soc node.
> > 
> > Move the node to the root node to avoid DT validation failures.
> > 
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
> >  1 file changed, 19 insertions(+), 21 deletions(-)
> 
> Don't you base on some older tree? It was alreadt moved. Maybe other
> changes were also implemented...

If you've moved this node is hasn't made it into linux-next (or the qcom
tree) yet.

Johan
  
Krzysztof Kozlowski Jan. 2, 2023, 3:09 p.m. UTC | #5
On 02/01/2023 16:03, Johan Hovold wrote:
> On Mon, Jan 02, 2023 at 01:20:03PM +0100, Krzysztof Kozlowski wrote:
>> On 02/01/2023 11:50, Johan Hovold wrote:
>>> The wcd938x codec is not a memory-mapped device and does not belong
>>> under the soc node.
>>>
>>> Move the node to the root node to avoid DT validation failures.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
>>>  1 file changed, 19 insertions(+), 21 deletions(-)
>>
>> Don't you base on some older tree? It was alreadt moved. Maybe other
>> changes were also implemented...
> 
> If you've moved this node is hasn't made it into linux-next (or the qcom
> tree) yet.

So you need to update your tree/rebase as this is already in Qualcomm
tree. There was no linux-next release since a week, so that's not a
solution.

Best regards,
Krzysztof
  
Johan Hovold Jan. 2, 2023, 3:18 p.m. UTC | #6
On Mon, Jan 02, 2023 at 04:09:14PM +0100, Krzysztof Kozlowski wrote:
> On 02/01/2023 16:03, Johan Hovold wrote:
> > On Mon, Jan 02, 2023 at 01:20:03PM +0100, Krzysztof Kozlowski wrote:
> >> On 02/01/2023 11:50, Johan Hovold wrote:
> >>> The wcd938x codec is not a memory-mapped device and does not belong
> >>> under the soc node.
> >>>
> >>> Move the node to the root node to avoid DT validation failures.
> >>>
> >>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> >>> ---
> >>>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
> >>>  1 file changed, 19 insertions(+), 21 deletions(-)
> >>
> >> Don't you base on some older tree? It was alreadt moved. Maybe other
> >> changes were also implemented...
> > 
> > If you've moved this node is hasn't made it into linux-next (or the qcom
> > tree) yet.
> 
> So you need to update your tree/rebase as this is already in Qualcomm
> tree. There was no linux-next release since a week, so that's not a
> solution.

As I wrote above, it's not in the qcom tree either.

Johan
  
Krzysztof Kozlowski Jan. 2, 2023, 3:22 p.m. UTC | #7
On 02/01/2023 16:18, Johan Hovold wrote:
> On Mon, Jan 02, 2023 at 04:09:14PM +0100, Krzysztof Kozlowski wrote:
>> On 02/01/2023 16:03, Johan Hovold wrote:
>>> On Mon, Jan 02, 2023 at 01:20:03PM +0100, Krzysztof Kozlowski wrote:
>>>> On 02/01/2023 11:50, Johan Hovold wrote:
>>>>> The wcd938x codec is not a memory-mapped device and does not belong
>>>>> under the soc node.
>>>>>
>>>>> Move the node to the root node to avoid DT validation failures.
>>>>>
>>>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>>>> ---
>>>>>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
>>>>>  1 file changed, 19 insertions(+), 21 deletions(-)
>>>>
>>>> Don't you base on some older tree? It was alreadt moved. Maybe other
>>>> changes were also implemented...
>>>
>>> If you've moved this node is hasn't made it into linux-next (or the qcom
>>> tree) yet.
>>
>> So you need to update your tree/rebase as this is already in Qualcomm
>> tree. There was no linux-next release since a week, so that's not a
>> solution.
> 
> As I wrote above, it's not in the qcom tree either.

Really?

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=for-next&id=e5b8c08245307a82cdf180cd5d385a34ba1cfd9d

Best regards,
Krzysztof
  
Johan Hovold Jan. 2, 2023, 3:28 p.m. UTC | #8
On Mon, Jan 02, 2023 at 04:22:30PM +0100, Krzysztof Kozlowski wrote:
> On 02/01/2023 16:18, Johan Hovold wrote:
> > On Mon, Jan 02, 2023 at 04:09:14PM +0100, Krzysztof Kozlowski wrote:
> >> On 02/01/2023 16:03, Johan Hovold wrote:
> >>> On Mon, Jan 02, 2023 at 01:20:03PM +0100, Krzysztof Kozlowski wrote:
> >>>> On 02/01/2023 11:50, Johan Hovold wrote:
> >>>>> The wcd938x codec is not a memory-mapped device and does not belong
> >>>>> under the soc node.
> >>>>>
> >>>>> Move the node to the root node to avoid DT validation failures.
> >>>>>
> >>>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> >>>>> ---
> >>>>>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
> >>>>>  1 file changed, 19 insertions(+), 21 deletions(-)
> >>>>
> >>>> Don't you base on some older tree? It was alreadt moved. Maybe other
> >>>> changes were also implemented...
> >>>
> >>> If you've moved this node is hasn't made it into linux-next (or the qcom
> >>> tree) yet.
> >>
> >> So you need to update your tree/rebase as this is already in Qualcomm
> >> tree. There was no linux-next release since a week, so that's not a
> >> solution.
> > 
> > As I wrote above, it's not in the qcom tree either.
> 
> Really?
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=for-next&id=e5b8c08245307a82cdf180cd5d385a34ba1cfd9d

Sorry, most have looked at on old branch or something.

Johan
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 3ed8c84e25b8..ea43dbdc3671 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -23,6 +23,25 @@  aliases {
 		serial0 = &uart12;
 	};
 
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+		#sound-dai-cells = <1>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		vdd-buck-supply = <&vreg_s4a_1p8>;
+		vdd-rxtx-supply = <&vreg_s4a_1p8>;
+		vdd-io-supply = <&vreg_s4a_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -631,27 +650,6 @@  &slpi {
 	firmware-name = "qcom/sm8250/slpi.mbn";
 };
 
-&soc {
-	wcd938x: codec {
-		compatible = "qcom,wcd9380-codec";
-		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-		vdd-buck-supply = <&vreg_s4a_1p8>;
-		vdd-rxtx-supply = <&vreg_s4a_1p8>;
-		vdd-io-supply = <&vreg_s4a_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob>;
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-	};
-};
-
 &sound {
 	compatible = "qcom,sm8250-sndcard";
 	model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";