[01/18] arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits

Message ID 20221231125911.437599-2-konrad.dybcio@linaro.org
State New
Headers
Series [01/18] arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits |

Commit Message

Konrad Dybcio Dec. 31, 2022, 12:58 p.m. UTC
  Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 67 ++++++++++++++++++++++-----
 1 file changed, 55 insertions(+), 12 deletions(-)
  

Comments

Krzysztof Kozlowski Dec. 31, 2022, 7:03 p.m. UTC | #1
On 31/12/2022 13:58, Konrad Dybcio wrote:
> Some addresses were 7-hex-digits long, or less. Fix that.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 67 ++++++++++++++++++++++-----
>  1 file changed, 55 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 2ceae73a6069..17e15a06254f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -146,7 +146,7 @@ reserved-memory {
>  		ranges;
>  
>  		rpm_msg_ram: memory@60000 {
> -			reg = <0x0 0x60000 0x0 0x6000>;
> +			reg = <0x0 0x00060000 0x0 0x6000>;
>  			no-map;
>  		};
>  
> @@ -181,7 +181,7 @@ soc: soc {
>  
>  		prng: qrng@e1000 {
>  			compatible = "qcom,prng-ee";
> -			reg = <0x0 0xe3000 0x0 0x1000>;
> +			reg = <0x0 0x000e3000 0x0 0x1000>;
>  			clocks = <&gcc GCC_PRNG_AHB_CLK>;
>  			clock-names = "core";
>  		};
> @@ -366,6 +366,49 @@ qpic_nand: nand-controller@79b0000 {
>  			status = "disabled";
>  		};
>  
> +		usb3: usb@8af8800 {
> +			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";

This hunk seems unrelated.

Best regards,
Krzysztof
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 2ceae73a6069..17e15a06254f 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -146,7 +146,7 @@  reserved-memory {
 		ranges;
 
 		rpm_msg_ram: memory@60000 {
-			reg = <0x0 0x60000 0x0 0x6000>;
+			reg = <0x0 0x00060000 0x0 0x6000>;
 			no-map;
 		};
 
@@ -181,7 +181,7 @@  soc: soc {
 
 		prng: qrng@e1000 {
 			compatible = "qcom,prng-ee";
-			reg = <0x0 0xe3000 0x0 0x1000>;
+			reg = <0x0 0x000e3000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
@@ -366,6 +366,49 @@  qpic_nand: nand-controller@79b0000 {
 			status = "disabled";
 		};
 
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x08af8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <20000000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x08a00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				clocks = <&xo>;
+				clock-names = "ref";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			#address-cells = <2>;
@@ -388,7 +431,7 @@  v2m@0 {
 
 		pcie_phy: phy@84000 {
 			compatible = "qcom,ipq6018-qmp-pcie-phy";
-			reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */
+			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -404,10 +447,10 @@  pcie_phy: phy@84000 {
 				      "common";
 
 			pcie_phy0: phy@84200 {
-				reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
-				      <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
-				      <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */
+				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
@@ -623,7 +666,7 @@  mdio: mdio@90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
-			reg = <0x0 0x90000 0x0 0x64>;
+			reg = <0x0 0x00090000 0x0 0x64>;
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 			status = "disabled";
@@ -631,7 +674,7 @@  mdio: mdio@90000 {
 
 		qusb_phy_1: qusb@59000 {
 			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x059000 0x0 0x180>;
+			reg = <0x0 0x00059000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
@@ -664,7 +707,7 @@  usb2: usb@70f8800 {
 
 			dwc_1: usb@7000000 {
 			       compatible = "snps,dwc3";
-			       reg = <0x0 0x7000000 0x0 0xcd00>;
+			       reg = <0x0 0x07000000 0x0 0xcd00>;
 			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			       phys = <&qusb_phy_1>;
 			       phy-names = "usb2-phy";
@@ -679,7 +722,7 @@  dwc_1: usb@7000000 {
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x78000 0x0 0x1c4>;
+			reg = <0x0 0x00078000 0x0 0x1c4>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -708,7 +751,7 @@  usb0_ssphy: phy@78200 {
 
 		qusb_phy_0: qusb@79000 {
 			compatible = "qcom,ipq6018-qusb2-phy";
-			reg = <0x0 0x079000 0x0 0x180>;
+			reg = <0x0 0x00079000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,