@@ -58,62 +58,69 @@ properties:
wakeup-parent: true
-#PIN CONFIGURATION NODES
patternProperties:
- '^.*$':
- if:
- type: object
- then:
- $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
- properties:
- pins:
- description:
- List of gpio pins affected by the properties specified in this
- subnode.
- items:
- oneOf:
- - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
- - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
- minItems: 1
- maxItems: 36
-
- function:
- description:
- Specify the alternative function to be configured for the specified
- pins.
-
- enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
- ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
- mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
- mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
- pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
- pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
- qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
- qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
- qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
- sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
- tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
- tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
- tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
-
- bias-pull-down: true
-
- bias-pull-up: true
-
- bias-disable: true
- drive-strength: true
- output-high: true
-
- output-low: true
-
- required:
- - pins
-
- additionalProperties: false
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8250-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8250-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8250-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+ pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+ qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+ tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ drive-strength: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
allOf:
- $ref: "pinctrl.yaml#"