[v3,4/7] arm64: dts: qcom: sc8280xp: add missing i2c nodes
Commit Message
Add the missing nodes for the i2c buses that's present on this SoC.
This work was derived from various patches that Qualcomm delivered
to Red Hat in a downstream kernel.
Signed-off-by: Brian Masney <bmasney@redhat.com>
---
Changes from v2 to v3
- None
Changes from v1 to v2
- Dropped qupX_ prefix from labels. (Johan)
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 352 +++++++++++++++++++++++++
1 file changed, 352 insertions(+)
Comments
On Tue, Dec 20, 2022 at 02:28:51PM -0500, Brian Masney wrote:
> Add the missing nodes for the i2c buses that's present on this SoC.
>
> This work was derived from various patches that Qualcomm delivered
> to Red Hat in a downstream kernel.
>
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
> Changes from v2 to v3
> - None
>
> Changes from v1 to v2
> - Dropped qupX_ prefix from labels. (Johan)
>
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 352 +++++++++++++++++++++++++
> 1 file changed, 352 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index f1111cd7f679..a502d4e19d98 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -813,6 +813,38 @@ qup2: geniqup@8c0000 {
>
> status = "disabled";
>
> + i2c16: i2c@880000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00880000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
I'm aware that the two current i2c nodes has these two properties here
in the middle, but would you mind moving '#address-cells' and
'#size-cells' after 'reg' instead where I'd expect them to be?
Same for the spi patch.
I can clean up the existing two nodes (and binding example) unless you
want to do it.
> + power-domains = <&rpmhpd SC8280XP_CX>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + status = "disabled";
> + };
Johan
On Fri, Dec 23, 2022 at 11:37:02AM +0100, Johan Hovold wrote:
> On Tue, Dec 20, 2022 at 02:28:51PM -0500, Brian Masney wrote:
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index f1111cd7f679..a502d4e19d98 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -813,6 +813,38 @@ qup2: geniqup@8c0000 {
> >
> > status = "disabled";
> >
> > + i2c16: i2c@880000 {
> > + compatible = "qcom,geni-i2c";
> > + reg = <0 0x00880000 0 0x4000>;
> > + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> > + clock-names = "se";
> > + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
>
> I'm aware that the two current i2c nodes has these two properties here
> in the middle, but would you mind moving '#address-cells' and
> '#size-cells' after 'reg' instead where I'd expect them to be?
>
> Same for the spi patch.
>
> I can clean up the existing two nodes (and binding example) unless you
> want to do it.
I'll clean up the existing nodes, qcom,i2c-geni-qcom.yaml, and
qcom,geni-se.yaml in my next version.
Brian
On 23.12.2022 11:37, Johan Hovold wrote:
> On Tue, Dec 20, 2022 at 02:28:51PM -0500, Brian Masney wrote:
>> Add the missing nodes for the i2c buses that's present on this SoC.
>>
>> This work was derived from various patches that Qualcomm delivered
>> to Red Hat in a downstream kernel.
>>
>> Signed-off-by: Brian Masney <bmasney@redhat.com>
>> ---
>> Changes from v2 to v3
>> - None
>>
>> Changes from v1 to v2
>> - Dropped qupX_ prefix from labels. (Johan)
>>
>> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 352 +++++++++++++++++++++++++
>> 1 file changed, 352 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index f1111cd7f679..a502d4e19d98 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -813,6 +813,38 @@ qup2: geniqup@8c0000 {
>>
>> status = "disabled";
>>
>> + i2c16: i2c@880000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00880000 0 0x4000>;
>> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
>> + clock-names = "se";
>> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> I'm aware that the two current i2c nodes has these two properties here
> in the middle, but would you mind moving '#address-cells' and
> '#size-cells' after 'reg' instead where I'd expect them to be?
Hm.. we've been sticking them somewhere near the end for the longest
time for every bus-like, or generally "i have childen" type node..
I see it's a rather mixed bag in non-qcom SoCs, people just seem to
put it wherever they please.. The dt spec doesn't seem to mention any
preference fwiw.
Konrad
>
> Same for the spi patch.
>
> I can clean up the existing two nodes (and binding example) unless you
> want to do it.
>
>> + power-domains = <&rpmhpd SC8280XP_CX>;
>> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
>> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
>> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + status = "disabled";
>> + };
>
> Johan
On Fri, Dec 23, 2022 at 01:42:32PM +0100, Konrad Dybcio wrote:
> On 23.12.2022 11:37, Johan Hovold wrote:
> >> + i2c16: i2c@880000 {
> >> + compatible = "qcom,geni-i2c";
> >> + reg = <0 0x00880000 0 0x4000>;
> >> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> >> + clock-names = "se";
> >> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >
> > I'm aware that the two current i2c nodes has these two properties here
> > in the middle, but would you mind moving '#address-cells' and
> > '#size-cells' after 'reg' instead where I'd expect them to be?
> Hm.. we've been sticking them somewhere near the end for the longest
> time for every bus-like, or generally "i have childen" type node..
> I see it's a rather mixed bag in non-qcom SoCs, people just seem to
> put it wherever they please.. The dt spec doesn't seem to mention any
> preference fwiw.
The rationale for placing them under 'reg' is that you keep the
address-related properties together (e.g. 'reg', '#address-cells',
'#size-cells' and 'ranges').
Johan
On 23.12.2022 14:05, Johan Hovold wrote:
> On Fri, Dec 23, 2022 at 01:42:32PM +0100, Konrad Dybcio wrote:
>> On 23.12.2022 11:37, Johan Hovold wrote:
>
>>>> + i2c16: i2c@880000 {
>>>> + compatible = "qcom,geni-i2c";
>>>> + reg = <0 0x00880000 0 0x4000>;
>>>> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
>>>> + clock-names = "se";
>>>> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>
>>> I'm aware that the two current i2c nodes has these two properties here
>>> in the middle, but would you mind moving '#address-cells' and
>>> '#size-cells' after 'reg' instead where I'd expect them to be?
>
>> Hm.. we've been sticking them somewhere near the end for the longest
>> time for every bus-like, or generally "i have childen" type node..
>> I see it's a rather mixed bag in non-qcom SoCs, people just seem to
>> put it wherever they please.. The dt spec doesn't seem to mention any
>> preference fwiw.
>
> The rationale for placing them under 'reg' is that you keep the
> address-related properties together (e.g. 'reg', '#address-cells',
> '#size-cells' and 'ranges').
Okay, I see the point.
Konrad
>
> Johan
@@ -813,6 +813,38 @@ qup2: geniqup@8c0000 {
status = "disabled";
+ i2c16: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c17: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
uart17: serial@884000 {
compatible = "qcom,geni-uart";
reg = <0 0x00884000 0 0x4000>;
@@ -827,6 +859,54 @@ uart17: serial@884000 {
status = "disabled";
};
+ i2c18: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c19: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c20: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
i2c21: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
@@ -842,6 +922,38 @@ i2c21: i2c@894000 {
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
+
+ i2c22: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c23: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
};
qup0: geniqup@9c0000 {
@@ -858,6 +970,70 @@ qup0: geniqup@9c0000 {
status = "disabled";
+ i2c0: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00980000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c1: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00984000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0098c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
i2c4: i2c@990000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00990000 0 0x4000>;
@@ -873,6 +1049,54 @@ i2c4: i2c@990000 {
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00994000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c6: i2c@998000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00998000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c7: i2c@99c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0099c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
};
qup1: geniqup@ac0000 {
@@ -888,6 +1112,134 @@ qup1: geniqup@ac0000 {
ranges;
status = "disabled";
+
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c14: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a98000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+
+ i2c15: i2c@a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a9c000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
};
pcie4: pcie@1c00000 {