Revert "drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega"
Commit Message
This reverts commit 9f55f36f749a7608eeef57d7d72991a9bd557341.
This commit causes repeated WARN_ONs from
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amd
gpu_dm.c:7391 amdgpu_dm_atomic_commit_tail+0x23b9/0x2430 [amdgpu]
dmesg fills up with the following messages and drm initialization takes
a very long time.
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 5 -----
drivers/gpu/drm/amd/amdgpu/soc15.c | 25 +++++++++++++++++++++++++
2 files changed, 25 insertions(+), 5 deletions(-)
Comments
On Mon, Oct 17, 2022 at 07:07:45PM -0600, Shuah Khan wrote:
> This reverts commit 9f55f36f749a7608eeef57d7d72991a9bd557341.
>
> This commit causes repeated WARN_ONs from
>
> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amd
> gpu_dm.c:7391 amdgpu_dm_atomic_commit_tail+0x23b9/0x2430 [amdgpu]
>
> dmesg fills up with the following messages and drm initialization takes
> a very long time.
>
> Cc: <stable@vger.kernel.org> # 5.10
> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
> ---
> drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 5 -----
> drivers/gpu/drm/amd/amdgpu/soc15.c | 25 +++++++++++++++++++++++++
> 2 files changed, 25 insertions(+), 5 deletions(-)
Both reverts now queued up, thanks.
greg k-h
@@ -1475,11 +1475,6 @@ static int sdma_v4_0_start(struct amdgpu_device *adev)
WREG32_SDMA(i, mmSDMA0_CNTL, temp);
if (!amdgpu_sriov_vf(adev)) {
- ring = &adev->sdma.instance[i].ring;
- adev->nbio.funcs->sdma_doorbell_range(adev, i,
- ring->use_doorbell, ring->doorbell_index,
- adev->doorbell_index.sdma_doorbell_range);
-
/* unhalt engine */
temp = RREG32_SDMA(i, mmSDMA0_F32_CNTL);
temp = REG_SET_FIELD(temp, SDMA0_F32_CNTL, HALT, 0);
@@ -1332,6 +1332,25 @@ static int soc15_common_sw_fini(void *handle)
return 0;
}
+static void soc15_doorbell_range_init(struct amdgpu_device *adev)
+{
+ int i;
+ struct amdgpu_ring *ring;
+
+ /* sdma/ih doorbell range are programed by hypervisor */
+ if (!amdgpu_sriov_vf(adev)) {
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ ring = &adev->sdma.instance[i].ring;
+ adev->nbio.funcs->sdma_doorbell_range(adev, i,
+ ring->use_doorbell, ring->doorbell_index,
+ adev->doorbell_index.sdma_doorbell_range);
+ }
+
+ adev->nbio.funcs->ih_doorbell_range(adev, adev->irq.ih.use_doorbell,
+ adev->irq.ih.doorbell_index);
+ }
+}
+
static int soc15_common_hw_init(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
@@ -1351,6 +1370,12 @@ static int soc15_common_hw_init(void *handle)
/* enable the doorbell aperture */
soc15_enable_doorbell_aperture(adev, true);
+ /* HW doorbell routing policy: doorbell writing not
+ * in SDMA/IH/MM/ACV range will be routed to CP. So
+ * we need to init SDMA/IH/MM/ACV doorbell range prior
+ * to CP ip block init and ring test.
+ */
+ soc15_doorbell_range_init(adev);
return 0;
}