[v5,4/4] media: platform: dwc: Add DW MIPI DPHY Rx driver

  From: Luis Oliveira <Luis.Oliveira@synopsys.com>

Add of Synopsys MIPI D-PHY in RX mode support.
Separated in the implementation are platform dependent probing functions.

Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
[eugen.hristev@microchip.com: add stop state check :
After coming out of reset, the PHY must have the lanes in stop state.
Wait for stop state to be active, and if it's not, print out a message.]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[luis.oliveira@synopsys.com: Add platform data support to D-Phy]
Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
---
 MAINTAINERS                                |   2 +
 drivers/media/platform/dwc/Kconfig         |  24 +-
 drivers/media/platform/dwc/Makefile        |   6 +
 drivers/media/platform/dwc/dw-dphy-plat.c  | 224 ++++++++
 drivers/media/platform/dwc/dw-dphy-rx.c    | 625 +++++++++++++++++++++
 drivers/media/platform/dwc/dw-dphy-rx.h    | 212 +++++++
 drivers/media/platform/dwc/dw-dphy-sysfs.c | 232 ++++++++
 include/media/dwc/dw-dphy-data.h           |  32 ++
 8 files changed, 1356 insertions(+), 1 deletion(-)
 create mode 100644 drivers/media/platform/dwc/dw-dphy-plat.c
 create mode 100644 drivers/media/platform/dwc/dw-dphy-rx.c
 create mode 100644 drivers/media/platform/dwc/dw-dphy-rx.h
 create mode 100644 drivers/media/platform/dwc/dw-dphy-sysfs.c
 create mode 100644 include/media/dwc/dw-dphy-data.h
  

Hi Eugen,

I love your patch! Perhaps something to improve:

[auto build test WARNING on media-tree/master]
[also build test WARNING on robh/for-next linus/master sailus-media-tree/streams v6.1 next-20221216]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Eugen-Hristev/media-dwc-add-csi2host-driver/20221216-224024
base:   git://linuxtv.org/media_tree.git master
patch link:    https://lore.kernel.org/r/20221216143717.1002015-5-eugen.hristev%40microchip.com
patch subject: [PATCH v5 4/4] media: platform: dwc: Add DW MIPI DPHY Rx driver
config: x86_64-allyesconfig
compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/35c9955340fd6d88770ab7d142b7a1d2b5b0d156
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Eugen-Hristev/media-dwc-add-csi2host-driver/20221216-224024
        git checkout 35c9955340fd6d88770ab7d142b7a1d2b5b0d156
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=x86_64 olddefconfig
        make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/media/platform/dwc/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/media/platform/dwc/dw-csi-plat.c: In function 'dw_csi_probe':
   drivers/media/platform/dwc/dw-csi-plat.c:541:9: warning: this 'else' clause does not guard... [-Wmisleading-indentation]
     541 |         else
         |         ^~~~
   drivers/media/platform/dwc/dw-csi-plat.c:544:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else'
     544 |                 goto end;
         |                 ^~~~
   In file included from drivers/media/platform/dwc/dw-csi-plat.c:11:
   At top level:
>> include/media/dwc/dw-csi-data.h:23:33: warning: 'csis' defined but not used [-Wunused-const-variable=]
      23 | static const struct pdata_names csis[] = {
         |                                 ^~~~


vim +/csis +23 include/media/dwc/dw-csi-data.h

4724a2dd0be3d5 Luis Oliveira 2022-12-16  22  
4724a2dd0be3d5 Luis Oliveira 2022-12-16 @23  static const struct pdata_names csis[] = {
  

Hi Eugen,

I love your patch! Perhaps something to improve:

[auto build test WARNING on media-tree/master]
[also build test WARNING on robh/for-next linus/master sailus-media-tree/streams v6.1 next-20221216]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Eugen-Hristev/media-dwc-add-csi2host-driver/20221216-224024
base:   git://linuxtv.org/media_tree.git master
patch link:    https://lore.kernel.org/r/20221216143717.1002015-5-eugen.hristev%40microchip.com
patch subject: [PATCH v5 4/4] media: platform: dwc: Add DW MIPI DPHY Rx driver
config: sh-allmodconfig
compiler: sh4-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/35c9955340fd6d88770ab7d142b7a1d2b5b0d156
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Eugen-Hristev/media-dwc-add-csi2host-driver/20221216-224024
        git checkout 35c9955340fd6d88770ab7d142b7a1d2b5b0d156
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sh olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sh SHELL=/bin/bash drivers/media/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/media/platform/dwc/dw-csi-plat.c: In function 'dw_csi_probe':
>> drivers/media/platform/dwc/dw-csi-plat.c:541:9: warning: this 'else' clause does not guard... [-Wmisleading-indentation]
     541 |         else
         |         ^~~~
   drivers/media/platform/dwc/dw-csi-plat.c:544:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else'
     544 |                 goto end;
         |                 ^~~~
   In file included from drivers/media/platform/dwc/dw-csi-plat.c:11:
   include/media/dwc/dw-csi-data.h: At top level:
   include/media/dwc/dw-csi-data.h:23:33: warning: 'csis' defined but not used [-Wunused-const-variable=]
      23 | static const struct pdata_names csis[] = {
         |                                 ^~~~
--
>> drivers/media/platform/dwc/dw-dphy-rx.c:97:6: warning: no previous prototype for 'dw_dphy_if_write' [-Wmissing-prototypes]
      97 | void dw_dphy_if_write(struct dw_dphy_rx *dphy, u32 address, u32 data)
         |      ^~~~~~~~~~~~~~~~
   drivers/media/platform/dwc/dw-dphy-rx.c: In function 'dw_dphy_read':
>> drivers/media/platform/dwc/dw-dphy-rx.c:144:24: warning: variable 'dphy2' set but not used [-Wunused-but-set-variable]
     144 |         int dphy1 = 0, dphy2 = 0;
         |                        ^~~~~
   drivers/media/platform/dwc/dw-dphy-rx.c: At top level:
>> drivers/media/platform/dwc/dw-dphy-rx.c:161:6: warning: no previous prototype for 'dw_dphy_write_msk' [-Wmissing-prototypes]
     161 | void dw_dphy_write_msk(struct dw_dphy_rx *dev, u32 address, u32 data, u8 shift,
         |      ^~~~~~~~~~~~~~~~~
>> drivers/media/platform/dwc/dw-dphy-rx.c:353:5: warning: no previous prototype for 'dw_dphy_g118_settle' [-Wmissing-prototypes]
     353 | int dw_dphy_g118_settle(struct dw_dphy_rx *dphy)
         |     ^~~~~~~~~~~~~~~~~~~
>> drivers/media/platform/dwc/dw-dphy-rx.c:500:5: warning: no previous prototype for 'dw_dphy_if_set_idelay' [-Wmissing-prototypes]
     500 | int dw_dphy_if_set_idelay(struct dw_dphy_rx *dphy, u8 dly, u8 cells)
         |     ^~~~~~~~~~~~~~~~~~~~~
--
   drivers/media/platform/dwc/dw-dphy-sysfs.c: In function 'dphy_addr_store':
>> drivers/media/platform/dwc/dw-dphy-sysfs.c:79:18: warning: variable 'payload' set but not used [-Wunused-but-set-variable]
      79 |         u8 addr, payload;
         |                  ^~~~~~~


vim +/dw_dphy_if_write +97 drivers/media/platform/dwc/dw-dphy-rx.c

    95	
    96	#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
  > 97	void dw_dphy_if_write(struct dw_dphy_rx *dphy, u32 address, u32 data)
    98	{
    99		writel(data, dphy->dphy1_if_addr + address);
   100	
   101		if (dphy->lanes_config == CTRL_4_LANES)
   102			return;
   103	
   104		iowrite32(data, dphy->dphy2_if_addr + address);
   105	}
   106	
   107	u32 dw_dphy_if_read(struct dw_dphy_rx *dphy, u32 address)
   108	{
   109		u32 if1 = 0, if2 = 0;
   110	
   111		if1 = readl(dphy->dphy1_if_addr + address);
   112	
   113		if (dphy->lanes_config == CTRL_4_LANES)
   114			goto end;
   115	
   116		if (dphy->lanes_config == DPHYID)
   117			goto end;
   118	
   119		if2 = readl(dphy->dphy2_if_addr + address);
   120	
   121		if (if1 != if2)
   122			dev_vdbg(&dphy->phy->dev,
   123				 "Values read different for each interface\n");
   124	end:
   125		return if1;
   126	}
   127	#endif
   128	
   129	void dw_dphy_write(struct dw_dphy_rx *dphy, u32 address, u32 data)
   130	{
   131		iowrite32(data, dphy->base_address + address);
   132	
   133		if (dphy->lanes_config == CTRL_4_LANES)
   134			return;
   135	
   136		if (address == R_CSI2_DPHY_TST_CTRL0)
   137			iowrite32(data, dphy->base_address + R_CSI2_DPHY2_TST_CTRL0);
   138		else if (address == R_CSI2_DPHY_TST_CTRL1)
   139			iowrite32(data, dphy->base_address + R_CSI2_DPHY2_TST_CTRL1);
   140	}
   141	
   142	u32 dw_dphy_read(struct dw_dphy_rx *dphy, u32 address)
   143	{
 > 144		int dphy1 = 0, dphy2 = 0;
   145	
   146		dphy1 = ioread32(dphy->base_address + address);
   147	
   148		if (dphy->lanes_config == CTRL_4_LANES)
   149			goto end;
   150	
   151		if (address == R_CSI2_DPHY_TST_CTRL0)
   152			dphy2 = ioread32(dphy->base_address + R_CSI2_DPHY2_TST_CTRL0);
   153		else if (address == R_CSI2_DPHY_TST_CTRL1)
   154			dphy2 = ioread32(dphy->base_address + R_CSI2_DPHY2_TST_CTRL1);
   155		else
   156			return -ENODEV;
   157	end:
   158		return dphy1;
   159	}
   160	
 > 161	void dw_dphy_write_msk(struct dw_dphy_rx *dev, u32 address, u32 data, u8 shift,
   162			       u8 width)
   163	{
   164		u32 temp = dw_dphy_read(dev, address);
   165		u32 mask = (1 << width) - 1;
   166	
   167		temp &= ~(mask << shift);
   168		temp |= (data & mask) << shift;
   169		dw_dphy_write(dev, address, temp);
   170	}
   171
  

Hi Eugen,

Thank you for the patchset.

On Fri, Dec 16, 2022 at 04:37:17PM +0200, Eugen Hristev wrote:
> From: Luis Oliveira <Luis.Oliveira@synopsys.com>
> 
> Add of Synopsys MIPI D-PHY in RX mode support.
> Separated in the implementation are platform dependent probing functions.

Please wrap at line length, not after periods.

> 
> Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
> [eugen.hristev@microchip.com: add stop state check :
> After coming out of reset, the PHY must have the lanes in stop state.
> Wait for stop state to be active, and if it's not, print out a message.]
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> [luis.oliveira@synopsys.com: Add platform data support to D-Phy]
> Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>

Sobs you should keep but I'd drop very detailed descriptions of who did
what.

> ---
>  MAINTAINERS                                |   2 +
>  drivers/media/platform/dwc/Kconfig         |  24 +-
>  drivers/media/platform/dwc/Makefile        |   6 +
>  drivers/media/platform/dwc/dw-dphy-plat.c  | 224 ++++++++
>  drivers/media/platform/dwc/dw-dphy-rx.c    | 625 +++++++++++++++++++++
>  drivers/media/platform/dwc/dw-dphy-rx.h    | 212 +++++++
>  drivers/media/platform/dwc/dw-dphy-sysfs.c | 232 ++++++++
>  include/media/dwc/dw-dphy-data.h           |  32 ++
>  8 files changed, 1356 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/media/platform/dwc/dw-dphy-plat.c
>  create mode 100644 drivers/media/platform/dwc/dw-dphy-rx.c
>  create mode 100644 drivers/media/platform/dwc/dw-dphy-rx.h
>  create mode 100644 drivers/media/platform/dwc/dw-dphy-sysfs.c
>  create mode 100644 include/media/dwc/dw-dphy-data.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a425dcb734db..2fc3c4d39c8d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20133,7 +20133,9 @@ S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
>  F:	drivers/media/platform/dwc
>  F:	Documentation/devicetree/bindings/media/snps,dw-csi.yaml
> +F:	Documentation/devicetree/bindings/phy/snps,dw-dphy-rx.txt
>  F:	include/media/dwc/dw-csi-data.h
> +F:	include/media/dwc/dw-dphy-data.h
>  
>  SYNOPSYS DESIGNWARE DMAC DRIVER
>  M:	Viresh Kumar <vireshk@kernel.org>
> diff --git a/drivers/media/platform/dwc/Kconfig b/drivers/media/platform/dwc/Kconfig
> index 508ac216e29d..b42219df2418 100644
> --- a/drivers/media/platform/dwc/Kconfig
> +++ b/drivers/media/platform/dwc/Kconfig
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  #
>  #  Synopsys DWC Platform drivers
> -#	Drivers here are currently for MIPI CSI-2 support
> +#	Drivers here are currently for MIPI CSI-2 and MIPI DPHY support
>  
>  config DWC_MIPI_CSI2_HOST
>  	tristate "Synopsys DesignWare CSI-2 Host Controller support"
> @@ -17,3 +17,25 @@ config DWC_MIPI_CSI2_HOST
>  	  If you have a controller with this interface, say Y.
>  
>  	   If unsure, say N.
> +
> +config DWC_MIPI_DPHY_GEN3
> +	tristate "DesignWare platform support using a Gen3 D-PHY"
> +	select GENERIC_PHY
> +	help
> +	 Synopsys MIPI D-PHY Generation 3 reference driver. This driver supports
> +	 all Generation 3 D-PHYs. Choose Y or M if you have a platform with this
> +	 block.
> +
> +	  If unsure, say N.
> +
> +if DWC_MIPI_DPHY_GEN3
> +
> +config DWC_MIPI_TC_DPHY_GEN3
> +	bool "Platform support using a Synopsys Test Chip"
> +	help
> +	 Synopsys Test Chip is for prototyping purposes. This enables extra
> +	 features that exist only in prototyping and/or for debug purposes.
> +
> +	  If unsure, say N.
> +
> +endif # DWC_MIPI_DPHY_GEN3
> diff --git a/drivers/media/platform/dwc/Makefile b/drivers/media/platform/dwc/Makefile
> index 057f137b733c..9af4dfb92e12 100644
> --- a/drivers/media/platform/dwc/Makefile
> +++ b/drivers/media/platform/dwc/Makefile
> @@ -7,3 +7,9 @@ ifeq ($(CONFIG_DWC_MIPI_TC_DPHY_GEN3),y)
>  	dw-csi-objs += dw-csi-sysfs.o
>  endif
>  obj-$(CONFIG_DWC_MIPI_CSI2_HOST) += dw-csi.o
> +
> +dw-dphy-objs := dw-dphy-plat.o dw-dphy-rx.o
> +ifeq ($(CONFIG_DWC_MIPI_TC_DPHY_GEN3),y)
> +	dw-dphy-objs += dw-dphy-sysfs.o
> +endif
> +obj-$(CONFIG_DWC_MIPI_DPHY_GEN3) += dw-dphy.o
> diff --git a/drivers/media/platform/dwc/dw-dphy-plat.c b/drivers/media/platform/dwc/dw-dphy-plat.c
> new file mode 100644
> index 000000000000..34d9caf957d0
> --- /dev/null
> +++ b/drivers/media/platform/dwc/dw-dphy-plat.c
> @@ -0,0 +1,224 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018-2019 Synopsys, Inc. and/or its affiliates.

How did this make it to 2023? :-)

> + *
> + * Synopsys DesignWare MIPI D-PHY controller driver.
> + * Platform driver
> + *
> + * Author: Luis Oliveira <luis.oliveira@synopsys.com>
> + */
> +
> +#include <media/dwc/dw-dphy-data.h>
> +#include <media/dwc/dw-csi-data.h>
> +
> +#include "dw-dphy-rx.h"
> +
> +static struct phy_ops dw_dphy_ops = {
> +	.init = dw_dphy_init,
> +	.reset = dw_dphy_reset,
> +	.power_on = dw_dphy_power_on,
> +	.power_off = dw_dphy_power_off,
> +	.owner = THIS_MODULE,
> +};

const?

> +
> +static struct phy_provider *phy_provider;
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +static u8 get_config_8l(struct device *dev, struct dw_dphy_rx *dphy)
> +{
> +	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
> +		dphy->config_8l = of_get_gpio(dev->of_node, 0);
> +		if (!gpio_is_valid(dphy->config_8l)) {
> +			dev_warn(dev,
> +				 "failed to parse 8l config, default is 0\n");
> +			dphy->config_8l = 0;
> +		}
> +	} else {
> +		struct dw_phy_pdata *pdata = dev->platform_data;
> +
> +		dphy->config_8l = pdata->config_8l;
> +	}
> +	return dphy->config_8l;
> +}
> +#endif
> +static int get_resources(struct device *dev, struct dw_dphy_rx *dphy)
> +{
> +	int ret = 0;
> +
> +	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
> +		if (of_property_read_u32(dev->of_node, "snps,dphy-frequency",
> +					 &dphy->dphy_freq)) {
> +			dev_err(dev, "failed to find dphy frequency\n");
> +			ret = -EINVAL;
> +		}
> +		if (of_property_read_u32(dev->of_node, "bus-width",
> +					 &dphy->dphy_te_len)) {
> +			dev_err(dev, "failed to find dphy te length\n");
> +			ret = -EINVAL;
> +		}
> +		if (of_property_read_u32(dev->of_node, "snps,phy_type",
> +					 &dphy->phy_type)) {
> +			dev_err(dev, "failed to find dphy type\n");
> +			ret = -EINVAL;
> +		}
> +	} else {
> +		struct dw_phy_pdata *pdata = dev->platform_data;
> +
> +		dphy->dphy_freq = pdata->dphy_frequency;
> +		dphy->dphy_te_len = pdata->dphy_te_len;
> +		dphy->dphy_gen = pdata->dphy_gen;
> +	}
> +	dev_set_drvdata(dev, dphy);
> +
> +	return ret;
> +}
> +
> +static int phy_register(struct device *dev)
> +{
> +	int ret = 0;
> +
> +	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
> +		phy_provider = devm_of_phy_provider_register(dev,
> +							     dw_dphy_xlate);
> +		if (IS_ERR(phy_provider)) {
> +			dev_err(dev, "error getting phy provider\n");
> +			ret = PTR_ERR(phy_provider);
> +		}
> +	} else {
> +		struct dw_phy_pdata *pdata = dev->platform_data;
> +		struct dw_dphy_rx *dphy = dev_get_drvdata(dev);
> +
> +		ret = phy_create_lookup(dphy->phy,
> +					phys[pdata->id].name,
> +					csis[pdata->id].name);
> +		if (ret)
> +			dev_err(dev, "Failed to create dphy lookup\n");
> +		else
> +			dev_warn(dev,
> +				 "Created dphy lookup [%s] --> [%s]\n",
> +				 phys[pdata->id].name, csis[pdata->id].name);
> +	}
> +	return ret;
> +}
> +
> +static void phy_unregister(struct device *dev)
> +{
> +	if (!dev->of_node) {
> +		struct dw_dphy_rx *dphy = dev_get_drvdata(dev);
> +
> +		phy_remove_lookup(dphy->phy, "dw-dphy", "dw-csi");
> +	}
> +}
> +
> +static int dw_dphy_rx_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct dw_dphy_rx *dphy;
> +	struct resource *res;
> +
> +	dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL);
> +	if (!dphy)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	dphy->base_address = devm_ioremap(&pdev->dev,
> +					  res->start, resource_size(res));
> +	if (IS_ERR(dphy->base_address)) {
> +		dev_err(&pdev->dev, "error requesting base address\n");
> +		return PTR_ERR(dphy->base_address);
> +	}
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +
> +	dphy->dphy1_if_addr = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(dphy->dphy1_if_addr)) {
> +		dev_err(&pdev->dev, "error requesting dphy 1 if regbank\n");
> +		return PTR_ERR(dphy->dphy1_if_addr);
> +	}
> +
> +	dphy->max_lanes =
> +		dw_dphy_if_read_msk(dphy, DPHYID, DPHY_ID_LANE_SUPPORT, 4);
> +
> +	dphy->dphy_gen = dw_dphy_if_read_msk(dphy, DPHYID, DPHY_ID_GEN, 4);
> +
> +	dev_info(&pdev->dev, "DPHY GEN %s with maximum %s lanes\n",
> +		 dphy->dphy_gen == GEN3 ? "3" : "2",
> +		 dphy->max_lanes == CTRL_8_LANES ? "8" : "4");
> +
> +	if (dphy->max_lanes == CTRL_8_LANES) {
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +		dphy->dphy2_if_addr =
> +			devm_ioremap(&pdev->dev,
> +				     res->start, resource_size(res));
> +
> +		if (IS_ERR(dphy->dphy2_if_addr)) {
> +			dev_err(&pdev->dev,
> +				"error requesting dphy 2 if regbank\n");
> +			return PTR_ERR(dphy->dphy2_if_addr);
> +		}
> +		dphy->config_8l = get_config_8l(&pdev->dev, dphy);
> +	}
> +#endif
> +	if (get_resources(dev, dphy)) {
> +		dev_err(dev, "failed to parse PHY resources\n");
> +		return -EINVAL;
> +	}
> +
> +	dphy->phy = devm_phy_create(dev, NULL, &dw_dphy_ops);
> +	if (IS_ERR(dphy->phy)) {
> +		dev_err(dev, "failed to create PHY\n");
> +		return PTR_ERR(dphy->phy);
> +	}
> +
> +	platform_set_drvdata(pdev, dphy);
> +	phy_set_drvdata(dphy->phy, dphy);
> +
> +	if (phy_register(dev)) {
> +		dev_err(dev, "failed to register PHY\n");
> +		return -EINVAL;
> +	}
> +
> +	dphy->lp_time = 1000; /* 1000 ns */
> +	dphy->lanes_config = dw_dphy_setup_config(dphy);
> +
> +	dev_info(dev, "Probing dphy finished\n");

Please remove, this is for debugging obviously.

> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	dw_dphy_create_capabilities_sysfs(pdev);
> +#endif
> +
> +	return 0;
> +}
> +
> +static int dw_dphy_rx_remove(struct platform_device *pdev)
> +{
> +	phy_unregister(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id dw_dphy_rx_of_match[] = {
> +	{ .compatible = "snps,dw-dphy-rx" },
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, dw_dphy_rx_of_match);
> +#endif
> +
> +static struct platform_driver dw_dphy_rx_driver = {
> +	.probe = dw_dphy_rx_probe,
> +	.remove = dw_dphy_rx_remove,
> +	.driver = {
> +#if IS_ENABLED(CONFIG_OF)
> +		.of_match_table = of_match_ptr(dw_dphy_rx_of_match),
> +#endif

Although it may be unlikely you'd find this in a non-OF system, there's no
technical reason for of_match_ptr() and keeping the OF ID table behind
#ifdef. of_match_ptr() generally is being removed.

> +		.name = "dw-dphy",
> +		.owner = THIS_MODULE,
> +	}
> +};
> +module_platform_driver(dw_dphy_rx_driver);
> +
> +MODULE_DESCRIPTION("Synopsys DesignWare MIPI DPHY Rx driver");
> +MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/media/platform/dwc/dw-dphy-rx.c b/drivers/media/platform/dwc/dw-dphy-rx.c
> new file mode 100644
> index 000000000000..1dd0d81feb61
> --- /dev/null
> +++ b/drivers/media/platform/dwc/dw-dphy-rx.c
> @@ -0,0 +1,625 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018-2019 Synopsys, Inc. and/or its affiliates.
> + *
> + * Synopsys DesignWare MIPI D-PHY controller driver
> + * Core functions
> + *
> + * Author: Luis Oliveira <luis.oliveira@synopsys.com>
> + */
> +
> +#include "dw-dphy-rx.h"
> +
> +struct range_dphy_gen2 {
> +	u32 freq;
> +	u8 hsfregrange;
> +};
> +
> +struct range_dphy_gen2 range_gen2[] = {
> +	{ 80, 0x00 }, { 90, 0x10 }, { 100, 0x20 }, { 110, 0x30 },
> +	{ 120, 0x01 }, { 130, 0x11 }, { 140, 0x21 }, { 150, 0x31 },
> +	{ 160, 0x02 }, { 170, 0x12 }, { 180, 0x22 }, { 190, 0x32 },
> +	{ 205, 0x03 }, { 220, 0x13 }, { 235, 0x23 }, { 250, 0x33 },
> +	{ 275, 0x04 }, { 300, 0x14 }, { 325, 0x05 }, { 350, 0x15 },
> +	{ 400, 0x25 }, { 450, 0x06 }, { 500, 0x16 }, { 550, 0x07 },
> +	{ 600, 0x17 }, { 650, 0x08 }, { 700, 0x18 }, { 750, 0x09 },
> +	{ 800, 0x19 }, { 850, 0x29 }, { 900, 0x39 }, { 950, 0x0A },
> +	{ 1000, 0x1A }, { 1050, 0x2A }, { 1100, 0x3A }, { 1150, 0x0B },
> +	{ 1200, 0x1B }, { 1250, 0x2B }, { 1300, 0x3B }, { 1350, 0x0C },
> +	{ 1400, 0x1C }, { 1450, 0x2C }, { 1500, 0x3C }, { 1550, 0x0D },
> +	{ 1600, 0x1D }, { 1650, 0x2D }, { 1700, 0x0E }, { 1750, 0x1E },
> +	{ 1800, 0x2E }, { 1850, 0x3E }, { 1900, 0x0F }, { 1950, 0x1F },
> +	{ 2000, 0x2F },
> +};
> +
> +struct range_dphy_gen3 {
> +	u32 freq;
> +	u8 hsfregrange;
> +	u32 osc_freq_target;
> +};
> +
> +struct range_dphy_gen3 range_gen3[] = {
> +	{ 80, 0x00, 0x1B6 }, { 90, 0x10, 0x1B6 }, { 100, 0x20, 0x1B6 },
> +	{ 110, 0x30, 0x1B6 }, { 120, 0x01, 0x1B6 }, { 130, 0x11, 0x1B6 },
> +	{ 140, 0x21, 0x1B6 }, { 150, 0x31, 0x1B6 }, { 160, 0x02, 0x1B6 },
> +	{ 170, 0x12, 0x1B6 }, { 180, 0x22, 0x1B6 }, { 190, 0x32, 0x1B6 },
> +	{ 205, 0x03, 0x1B6 }, { 220, 0x13, 0x1B6 }, { 235, 0x23, 0x1B6 },
> +	{ 250, 0x33, 0x1B6 }, { 275, 0x04, 0x1B6 }, { 300, 0x14, 0x1B6 },
> +	{ 325, 0x25, 0x1B6 }, { 350, 0x35, 0x1B6 }, { 400, 0x05, 0x1B6 },
> +	{ 450, 0x16, 0x1B6 }, { 500, 0x26, 0x1B6 }, { 550, 0x37, 0x1B6 },
> +	{ 600, 0x07, 0x1B6 }, { 650, 0x18, 0x1B6 }, { 700, 0x28, 0x1B6 },
> +	{ 750, 0x39, 0x1B6 }, { 800, 0x09, 0x1B6 }, { 850, 0x19, 0x1B6 },
> +	{ 900, 0x29, 0x1B6 }, { 950, 0x3A, 0x1B6 }, { 1000, 0x0A, 0x1B6 },
> +	{ 1050, 0x1A, 0x1B6 }, { 1100, 0x2A, 0x1B6 }, { 1150, 0x3B, 0x1B6 },
> +	{ 1200, 0x0B, 0x1B6 }, { 1250, 0x1B, 0x1B6 }, { 1300, 0x2B, 0x1B6 },
> +	{ 1350, 0x3C, 0x1B6 }, { 1400, 0x0C, 0x1B6 }, { 1450, 0x1C, 0x1B6 },
> +	{ 1500, 0x2C, 0x1B6 }, { 1550, 0x3D, 0x10F }, { 1600, 0x0D, 0x118 },
> +	{ 1650, 0x1D, 0x121 }, { 1700, 0x2E, 0x12A }, { 1750, 0x3E, 0x132 },
> +	{ 1800, 0x0E, 0x13B }, { 1850, 0x1E, 0x144 }, { 1900, 0x2F, 0x14D },
> +	{ 1950, 0x3F, 0x155 }, { 2000, 0x0F, 0x15E }, { 2050, 0x40, 0x167 },
> +	{ 2100, 0x41, 0x170 }, { 2150, 0x42, 0x178 }, { 2200, 0x43, 0x181 },
> +	{ 2250, 0x44, 0x18A }, { 2300, 0x45, 0x193 }, { 2350, 0x46, 0x19B },
> +	{ 2400, 0x47, 0x1A4 }, { 2450, 0x48, 0x1AD }, { 2500, 0x49, 0x1B6 }
> +};
> +
> +u8 dw_dphy_setup_config(struct dw_dphy_rx *dphy)
> +{
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	int ret;
> +
> +	if (dphy->max_lanes == CTRL_4_LANES) {
> +		dev_vdbg(&dphy->phy->dev, "CONFIG 4L\n");
> +		return CTRL_4_LANES;
> +	}
> +	if (IS_ENABLED(CONFIG_OF)) {
> +		ret = gpio_request(dphy->config_8l, "config");
> +		if (ret < 0) {
> +			dev_vdbg(&dphy->phy->dev,
> +				 "could not acquire config (err=%d)\n", ret);
> +			return ret;
> +		}
> +		ret = gpio_get_value(dphy->config_8l);
> +		gpio_free(dphy->config_8l);
> +	} else {
> +		ret = dphy->config_8l;
> +	}
> +
> +	dev_vdbg(&dphy->phy->dev,
> +		 "Booting in [%s] mode\n",
> +		 ret == CTRL_8_LANES ? "8L" : "4+4L");

More fits to the same line.

Please leave an empty line before return here.

> +	return ret;
> +
> +#endif /* CONFIG_DWC_MIPI_TC_DPHY_GEN3 */

Would be nice here, too.

> +	return CTRL_4_LANES;
> +}
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +void dw_dphy_if_write(struct dw_dphy_rx *dphy, u32 address, u32 data)
> +{
> +	writel(data, dphy->dphy1_if_addr + address);
> +
> +	if (dphy->lanes_config == CTRL_4_LANES)
> +		return;
> +
> +	iowrite32(data, dphy->dphy2_if_addr + address);
> +}
> +
> +u32 dw_dphy_if_read(struct dw_dphy_rx *dphy, u32 address)
> +{
> +	u32 if1 = 0, if2 = 0;
> +
> +	if1 = readl(dphy->dphy1_if_addr + address);
> +
> +	if (dphy->lanes_config == CTRL_4_LANES)
> +		goto end;
> +
> +	if (dphy->lanes_config == DPHYID)
> +		goto end;
> +
> +	if2 = readl(dphy->dphy2_if_addr + address);
> +
> +	if (if1 != if2)
> +		dev_vdbg(&dphy->phy->dev,
> +			 "Values read different for each interface\n");
> +end:
> +	return if1;
> +}
> +#endif
> +
> +void dw_dphy_write(struct dw_dphy_rx *dphy, u32 address, u32 data)
> +{
> +	iowrite32(data, dphy->base_address + address);
> +
> +	if (dphy->lanes_config == CTRL_4_LANES)
> +		return;
> +
> +	if (address == R_CSI2_DPHY_TST_CTRL0)
> +		iowrite32(data, dphy->base_address + R_CSI2_DPHY2_TST_CTRL0);
> +	else if (address == R_CSI2_DPHY_TST_CTRL1)
> +		iowrite32(data, dphy->base_address + R_CSI2_DPHY2_TST_CTRL1);
> +}
> +
> +u32 dw_dphy_read(struct dw_dphy_rx *dphy, u32 address)
> +{
> +	int dphy1 = 0, dphy2 = 0;
> +
> +	dphy1 = ioread32(dphy->base_address + address);
> +
> +	if (dphy->lanes_config == CTRL_4_LANES)
> +		goto end;
> +
> +	if (address == R_CSI2_DPHY_TST_CTRL0)
> +		dphy2 = ioread32(dphy->base_address + R_CSI2_DPHY2_TST_CTRL0);
> +	else if (address == R_CSI2_DPHY_TST_CTRL1)
> +		dphy2 = ioread32(dphy->base_address + R_CSI2_DPHY2_TST_CTRL1);
> +	else
> +		return -ENODEV;

A newline before a label? Same above in dw_dphy_if_read actually.

> +end:
> +	return dphy1;
> +}
> +
> +void dw_dphy_write_msk(struct dw_dphy_rx *dev, u32 address, u32 data, u8 shift,
> +		       u8 width)
> +{
> +	u32 temp = dw_dphy_read(dev, address);
> +	u32 mask = (1 << width) - 1;
> +
> +	temp &= ~(mask << shift);
> +	temp |= (data & mask) << shift;
> +	dw_dphy_write(dev, address, temp);
> +}
> +
> +static void dw_dphy_te_12b_write(struct dw_dphy_rx *dphy, u16 addr, u8 data)
> +{
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 1, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0x00, PHY_TESTDIN, 8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, (u8)(addr >> 8),
> +			  PHY_TESTDIN, 8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 1, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, (u8)addr, PHY_TESTDIN,
> +			  8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, (u8)data, PHY_TESTDIN,
> +			  8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +}
> +
> +static void dw_dphy_te_8b_write(struct dw_dphy_rx *dphy, u8 addr, u8 data)
> +{
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_TST_CTRL1, addr);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 1, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_TST_CTRL1, data);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +}
> +
> +static void dw_dphy_te_write(struct dw_dphy_rx *dphy, u16 addr, u8 data)
> +{
> +	if (dphy->dphy_te_len == BIT12)
> +		dw_dphy_te_12b_write(dphy, addr, data);
> +	else
> +		dw_dphy_te_8b_write(dphy, addr, data);
> +}
> +
> +static int dw_dphy_te_12b_read(struct dw_dphy_rx *dphy, u32 addr)
> +{
> +	u8 ret;

If you're dealing with 8-bit registers, you'd better return an u8 here.
Same below.

> +
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 0);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 1, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0x00, PHY_TESTDIN, 8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, (u8)(addr >> 8),
> +			  PHY_TESTDIN, 8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 1, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, (u8)addr, PHY_TESTDIN,
> +			  8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0x00, 0, PHY_TESTDIN);
> +	ret = dw_dphy_read_msk(dphy, R_CSI2_DPHY_TST_CTRL1, PHY_TESTDOUT, 8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 1);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 1);
> +
> +	return ret;
> +}
> +
> +static int dw_dphy_te_8b_read(struct dw_dphy_rx *dphy, u32 addr)
> +{
> +	u8 ret;
> +
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 0);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 1, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, addr, PHY_TESTDIN, 8);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTEN, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL1, 0, PHY_TESTDIN, 8);
> +	ret = dw_dphy_read_msk(dphy, R_CSI2_DPHY_TST_CTRL1, PHY_TESTDOUT, 8);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 1);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 1);
> +
> +	return ret;
> +}
> +
> +int dw_dphy_te_read(struct dw_dphy_rx *dphy, u32 addr)

As well as here.

> +{
> +	int ret;
> +
> +	if (dphy->dphy_te_len == BIT12)
> +		ret = dw_dphy_te_12b_read(dphy, addr);
> +	else
> +		ret = dw_dphy_te_8b_read(dphy, addr);
> +
> +	return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +static void dw_dphy_if_init(struct dw_dphy_rx *dphy)
> +{
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, TX_PHY);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLR, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLR, 1);
> +	dw_dphy_if_write(dphy, DPHYZCALCTRL, 0);
> +	dw_dphy_if_write(dphy, DPHYZCALCTRL, 1);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, GLUELOGIC);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLR, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLR, 1);
> +	dw_dphy_if_write(dphy, DPHYZCALCTRL, 0);
> +	dw_dphy_if_write(dphy, DPHYZCALCTRL, 1);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RX_PHY);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLR, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLR, 1);
> +	dw_dphy_if_write(dphy, DPHYZCALCTRL, 0);
> +	dw_dphy_if_write(dphy, DPHYZCALCTRL, 1);
> +}
> +#endif
> +
> +static void dw_dphy_gen3_12bit_tc_power_up(struct dw_dphy_rx *dphy)
> +{
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, GLUELOGIC);
> +#endif
> +	dw_dphy_te_write(dphy, CFGCLKFREQRANGE_TX, 0x1C);
> +
> +	/* CLKSEL | UPDATEPLL | SHADOW_CLEAR | SHADOW_CTRL | FORCEPLL */
> +	dw_dphy_te_write(dphy, BYPASS, 0x3F);
> +
> +	/* IO_DS3 | IO_DS2 | IO_DS1 | IO_DS0 */
> +	if (dphy->dphy_freq > 1500)
> +		dw_dphy_te_write(dphy, IO_DS, 0x0F);
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RX_PHY);
> +#endif
> +}
> +
> +static void dw_dphy_gen3_8bit_tc_power_up(struct dw_dphy_rx *dphy)
> +{
> +	u32 input_freq = dphy->dphy_freq / 1000;
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, GLUELOGIC);
> +	dw_dphy_te_write(dphy, CFGCLKFREQRANGE_RX, 0x1C);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RESET);
> +	dw_dphy_if_write(dphy, DPHYGLUEIFTESTER, RX_PHY);
> +#endif
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX0_MSB, 0x03);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX0_LSB, 0x02);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX1_MSB, 0x03);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX1_LSB, 0x02);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX2_MSB, 0x03);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX2_LSB, 0x02);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX3_MSB, 0x03);
> +	dw_dphy_te_write(dphy, OSC_FREQ_TARGET_RX3_LSB, 0x02);
> +	dw_dphy_te_write(dphy, BANDGAP_CTRL, 0x80);
> +
> +	if (input_freq < 2000)
> +		dw_dphy_te_write(dphy, HS_RX_CTRL_LANE0, 0xC0);
> +
> +	if (input_freq < 1000) {
> +		dw_dphy_te_write(dphy, HS_RX_CTRL_LANE1, 0xC0);
> +		dw_dphy_te_write(dphy, HS_RX_CTRL_LANE2, 0xC0);
> +		dw_dphy_te_write(dphy, HS_RX_CTRL_LANE3, 0xC0);
> +	}
> +}
> +
> +int dw_dphy_g118_settle(struct dw_dphy_rx *dphy)
> +{
> +	u32 input_freq, total_settle, settle_time, byte_clk, lp_time;
> +
> +	lp_time = dphy->lp_time;
> +	input_freq = dphy->dphy_freq / 1000;
> +
> +	settle_time = (8 * (1000000 / (input_freq))) + 115000;
> +	byte_clk = (8000000 / (input_freq));
> +	total_settle = (settle_time + lp_time * 1000) / byte_clk;
> +
> +	if (total_settle > 0xFF)
> +		total_settle = 0xFF;
> +
> +	return total_settle;
> +}
> +
> +static void dw_dphy_pwr_down(struct dw_dphy_rx *dphy)
> +{
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLK, 1);
> +	if (dphy->lanes_config == CTRL_8_LANES)
> +		dw_dphy_write_msk(dphy, R_CSI2_DPHY2_TST_CTRL0, 0, PHY_TESTCLK,
> +				  1);
> +
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 0);
> +}
> +
> +static void dw_dphy_pwr_up(struct dw_dphy_rx *dphy)
> +{
> +	u32 state = 0, wait = 0;
> +
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLK, 1);
> +	if (dphy->lanes_config == CTRL_8_LANES)
> +		dw_dphy_write_msk(dphy, R_CSI2_DPHY2_TST_CTRL0, 1, PHY_TESTCLK,
> +				  1);
> +	dev_vdbg(&dphy->phy->dev, "DPHY power up.\n");
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 1);
> +	usleep_range(100, 500);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 1);
> +
> +	while (state != 0x10003) {
> +		state = dw_dphy_read(dphy, R_CSI2_DPHY_STOPSTATE);
> +		usleep_range(100, 500);
> +		wait++;
> +		if (wait > 10)
> +			break;
> +	}
> +	if (state != 0x10003)

A macro definition for this magical value would be nice.

> +		dev_warn(&dphy->phy->dev, "PHY Stop state not reached %x\n",
> +			 state);
> +}
> +
> +static int dw_dphy_gen3_12bit_configure(struct dw_dphy_rx *dphy)
> +{
> +	u32 input_freq = dphy->dphy_freq;
> +	u8 range = 0;

No need to initialise range here.

> +
> +	dev_vdbg(&dphy->phy->dev, "12bit: PHY GEN 3: Freq: %u\n", input_freq);

Why not dev_dbg()? Same for other similar lines.

> +	for (range = 0; (range < ARRAY_SIZE(range_gen3) - 1) &&
> +	     ((input_freq / 1000) > range_gen3[range].freq);
> +	     range++)
> +		;
> +
> +	dw_dphy_gen3_12bit_tc_power_up(dphy);
> +	dw_dphy_te_write(dphy, RX_SYS_1, range_gen3[range].hsfregrange);
> +	dw_dphy_te_write(dphy, RX_SYS_0, 0x20);
> +	dw_dphy_te_write(dphy, RX_RX_STARTUP_OVR_2,
> +			 (u8)range_gen3[range].osc_freq_target);
> +	dw_dphy_te_write(dphy, RX_RX_STARTUP_OVR_3,
> +			 (u8)(range_gen3[range].osc_freq_target >> 8));
> +	dw_dphy_te_write(dphy, RX_RX_STARTUP_OVR_4, 0x01);
> +
> +	if (dphy->phy_type) {
> +		dw_dphy_te_write(dphy, RX_RX_STARTUP_OVR_1, 0x01);
> +		dw_dphy_te_write(dphy, RX_RX_STARTUP_OVR_0, 0x80);
> +	}
> +
> +	if (dphy->phy_type || input_freq <= 1500)
> +		dw_dphy_te_write(dphy, RX_SYS_7, 0x38);
> +
> +	return 0;
> +}
> +
> +static int dw_dphy_gen3_8bit_configure(struct dw_dphy_rx *dphy)
> +{
> +	u32 input_freq = dphy->dphy_freq;
> +	u8 data;
> +	u8 range = 0;

Ditto.

Would be nice to declare data after range.

> +
> +	dev_vdbg(&dphy->phy->dev, "8bit: PHY GEN 3: Freq: %u\n", input_freq);
> +	for (range = 0; (range < ARRAY_SIZE(range_gen3) - 1) &&
> +	     ((input_freq / 1000) > range_gen3[range].freq);
> +	     range++)
> +		;
> +
> +	dw_dphy_te_write(dphy, RX_SKEW_CAL, dw_dphy_g118_settle(dphy));
> +	data = 1 << 7 | range_gen3[range].hsfregrange;
> +	dw_dphy_te_write(dphy, HSFREQRANGE_8BIT, data);
> +	dw_dphy_gen3_8bit_tc_power_up(dphy);
> +
> +	return 0;
> +}
> +
> +static int dw_dphy_gen2_configure(struct dw_dphy_rx *dphy)
> +{
> +	u32 input_freq = dphy->dphy_freq;
> +	u8 data;
> +	u8 range = 0;

Ditto.

> +
> +	/* provide an initial active-high test clear pulse in TESTCLR  */
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 1, PHY_TESTCLR, 1);
> +	dw_dphy_write_msk(dphy, R_CSI2_DPHY_TST_CTRL0, 0, PHY_TESTCLR, 1);
> +
> +	dev_vdbg(&dphy->phy->dev, "PHY GEN 2: Freq: %u\n", input_freq);
> +	for (range = 0; (range < ARRAY_SIZE(range_gen2) - 1) &&
> +	     ((input_freq / 1000) > range_gen2[range].freq); range++)
> +		;
> +
> +	data = range_gen2[range].hsfregrange << 1;
> +	dw_dphy_te_write(dphy, HSFREQRANGE_8BIT, data);
> +
> +	return 0;
> +}
> +
> +static int dw_dphy_configure(struct dw_dphy_rx *dphy)
> +{
> +	dw_dphy_pwr_down(dphy);
> +
> +	if (dphy->dphy_gen == GEN3) {
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +		dw_dphy_if_init(dphy);
> +#endif
> +		if (dphy->dphy_te_len == BIT12)
> +			dw_dphy_gen3_12bit_configure(dphy);
> +		else
> +			dw_dphy_gen3_8bit_configure(dphy);
> +	} else {
> +		dw_dphy_gen2_configure(dphy);
> +	}
> +	dw_dphy_pwr_up(dphy);
> +
> +	return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +int dw_dphy_if_set_idelay(struct dw_dphy_rx *dphy, u8 dly, u8 cells)
> +{
> +	u32 val = 0;

No need to initialise val.

> +
> +	dw_dphy_if_write(dphy, IDLYCFG, 0);
> +	dw_dphy_if_write(dphy, IDLYSEL, cells);
> +	dw_dphy_if_write(dphy, IDLYCNTINVAL, dly);
> +
> +	/* Pulse Value Set */
> +	dw_dphy_if_write(dphy, IDLYCFG, 1);
> +	usleep_range(10, 20);
> +	dw_dphy_if_write(dphy, IDLYCFG, 0);
> +
> +	/* Pulse IDELAY CTRL Reset */
> +	dw_dphy_if_write(dphy, DPHY1REGRSTN, 0);
> +	usleep_range(10, 20);
> +	dw_dphy_if_write(dphy, DPHY1REGRSTN, 1);
> +
> +	/* Get Value*/
> +	val = dw_dphy_if_read(dphy, IDLYCNTOUTVAL);
> +
> +	if (val != dly) {
> +		dev_vdbg(&dphy->phy->dev,
> +			 "odelay config failed, set %d get %d", dly, val);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +int dw_dphy_if_get_idelay(struct dw_dphy_rx *dphy)
> +{
> +	return dw_dphy_if_read(dphy, IDLYCNTOUTVAL);
> +}
> +
> +int dw_dphy_if_set_idelay_lane(struct dw_dphy_rx *dphy, u8 dly, u8 lane)
> +{
> +	int cell;

unsigned int?

> +
> +	switch (lane) {
> +	case 0:
> +		for (cell = 3; cell <= 10; cell++)
> +			dw_dphy_if_set_idelay(dphy, dly, cell);
> +		break;
> +	case 1:
> +		for (cell = 14; cell <= 21; cell++)
> +			dw_dphy_if_set_idelay(dphy, dly, cell);
> +		break;
> +	case 2:
> +		for (cell = 24; cell <= 31; cell++)
> +			dw_dphy_if_set_idelay(dphy, dly, cell);
> +		break;
> +	case 3:
> +		for (cell = 34; cell <= 41; cell++)
> +			dw_dphy_if_set_idelay(dphy, dly, cell);
> +		break;
> +	case 4: /* ALL */
> +		dw_dphy_if_set_idelay(dphy, dly, 0x7F);

Lower case hexadecimals are preferred.

> +		break;
> +	default:
> +		dev_err(&dphy->phy->dev, "Lane Value not recognized\n");
> +		return -1;

The return value appears to be unused by the caller. Either return void or
check the value.

> +	}
> +	return 0;
> +}
> +#endif
> +
> +int dw_dphy_init(struct phy *phy)
> +{
> +	struct dw_dphy_rx *dphy = phy_get_drvdata(phy);
> +
> +	dev_vdbg(&dphy->phy->dev, "Init DPHY.\n");
> +
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 0);
> +
> +	return 0;
> +}
> +
> +static int dw_dphy_set_phy_state(struct dw_dphy_rx *dphy, u32 on)
> +{
> +	u8 hs_freq;
> +
> +	dphy->lanes_config = dw_dphy_setup_config(dphy);
> +
> +	if (dphy->dphy_te_len == BIT12)
> +		hs_freq = RX_SYS_1;
> +	else
> +		hs_freq = HSFREQRANGE_8BIT;
> +
> +	if (on) {
> +		dw_dphy_configure(dphy);
> +		dev_vdbg(&dphy->phy->dev,
> +			 "HS Code: 0X%x\n", dw_dphy_te_read(dphy, hs_freq));
> +	} else {
> +		dw_dphy_write(dphy, R_CSI2_DPHY_SHUTDOWNZ, 0);
> +		dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +	}
> +
> +	return 0;
> +}
> +
> +int dw_dphy_power_on(struct phy *phy)
> +{
> +	struct dw_dphy_rx *dphy = phy_get_drvdata(phy);
> +
> +	return dw_dphy_set_phy_state(dphy, 1);
> +}
> +
> +int dw_dphy_power_off(struct phy *phy)
> +{
> +	struct dw_dphy_rx *dphy = phy_get_drvdata(phy);
> +
> +	return dw_dphy_set_phy_state(dphy, 0);
> +}
> +
> +int dw_dphy_reset(struct phy *phy)
> +{
> +	struct dw_dphy_rx *dphy = phy_get_drvdata(phy);
> +
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +	usleep_range(100, 200);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 1);
> +
> +	return 0;
> +}
> diff --git a/drivers/media/platform/dwc/dw-dphy-rx.h b/drivers/media/platform/dwc/dw-dphy-rx.h
> new file mode 100644
> index 000000000000..2e8d68c914c1
> --- /dev/null
> +++ b/drivers/media/platform/dwc/dw-dphy-rx.h
> @@ -0,0 +1,212 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018-2019 Synopsys, Inc. and/or its affiliates.
> + *
> + * Synopsys DesignWare MIPI D-PHY controller driver
> + *
> + * Author: Luis Oliveira <luis.oliveira@synopsys.com>
> + */
> +
> +#ifndef __PHY_SNPS_DPHY_RX_H__
> +#define __PHY_SNPS_DPHY_RX_H__
> +
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
> +#include <linux/phy/phy-mipi-dphy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +/* DPHY interface register bank*/
> +
> +#define R_CSI2_DPHY_SHUTDOWNZ 0x0
> +#define R_CSI2_DPHY_RSTZ 0x4
> +#define R_CSI2_DPHY_RX 0x8
> +#define	R_CSI2_DPHY_STOPSTATE 0xC
> +#define R_CSI2_DPHY_TST_CTRL0 0x10
> +#define R_CSI2_DPHY_TST_CTRL1 0x14
> +#define R_CSI2_DPHY2_TST_CTRL0 0x18
> +#define R_CSI2_DPHY2_TST_CTRL1 0x1C
> +
> +enum dphy_id_mask {
> +	DPHY_ID_LANE_SUPPORT = 0,
> +	DPHY_ID_IF = 4,
> +	DPHY_ID_GEN = 8,
> +};
> +
> +enum dphy_gen_values {
> +	GEN1,
> +	GEN2,
> +	GEN3,
> +};
> +
> +enum dphy_interface_length {
> +	BIT8 = 8,
> +	BIT12 = 12,
> +};
> +
> +enum tst_ctrl0 {
> +	PHY_TESTCLR,
> +	PHY_TESTCLK,
> +};
> +
> +enum tst_ctrl1 {
> +	PHY_TESTDIN = 0,
> +	PHY_TESTDOUT = 8,
> +	PHY_TESTEN = 16,
> +};
> +
> +enum lanes_config_values {
> +	CTRL_4_LANES,
> +	CTRL_8_LANES,
> +};
> +
> +enum dphy_tc {
> +	CFGCLKFREQRANGE_TX = 0x02,
> +	CFGCLKFREQRANGE_RX = 0x05,
> +	BYPASS = 0x20,
> +	IO_DS = 0x30,
> +};
> +
> +enum dphy_8bit_interface_addr {
> +	BANDGAP_CTRL = 0x24,
> +	HS_RX_CTRL_LANE0 = 0x42,
> +	HSFREQRANGE_8BIT = 0x44,
> +	OSC_FREQ_TARGET_RX0_LSB	= 0x4e,
> +	OSC_FREQ_TARGET_RX0_MSB	= 0x4f,
> +	HS_RX_CTRL_LANE1 = 0x52,
> +	OSC_FREQ_TARGET_RX1_LSB	= 0x5e,
> +	OSC_FREQ_TARGET_RX1_MSB	= 0x5f,
> +	RX_SKEW_CAL = 0x7e,
> +	HS_RX_CTRL_LANE2 = 0x82,
> +	OSC_FREQ_TARGET_RX2_LSB	= 0x8e,
> +	OSC_FREQ_TARGET_RX2_MSB	= 0x8f,
> +	HS_RX_CTRL_LANE3 = 0x92,
> +	OSC_FREQ_TARGET_RX3_LSB	= 0x9e,
> +	OSC_FREQ_TARGET_RX3_MSB	= 0x9f,
> +};
> +
> +enum dphy_12bit_interface_addr {
> +	RX_SYS_0 = 0x01,
> +	RX_SYS_1 = 0x02,
> +	RX_SYS_7 = 0x08,
> +	RX_RX_STARTUP_OVR_0 = 0xe0,
> +	RX_RX_STARTUP_OVR_1 = 0xe1,
> +	RX_RX_STARTUP_OVR_2 = 0xe2,
> +	RX_RX_STARTUP_OVR_3 = 0xe3,
> +	RX_RX_STARTUP_OVR_4 = 0xe4,
> +};
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +/* Testchip interface register bank */
> +#define IDLYCFG	0x00
> +#define IDLYSEL	0x04
> +#define IDLYCNTINVAL 0x08
> +#define IDLYCNTOUTVAL 0x0c
> +#define DPHY1REGRSTN 0x10
> +#define DPHYZCALSTAT 0x14
> +#define DPHYZCALCTRL 0x18
> +#define DPHYLANE0STAT 0x1c
> +#define DPHYLANE1STAT 0x20
> +#define DPHYLANE2STAT 0x24
> +#define DPHYLANE3STAT 0x28
> +#define DPHYCLKSTAT 0x2c
> +#define DPHYZCLKCTRL 0x30
> +#define TCGENPURPOSOUT 0x34
> +#define TCGENPURPOSIN 0x38
> +#define DPHYGENERICOUT 0x3c
> +#define DPHYGENERICIN 0x40
> +#define DPHYGLUEIFTESTER 0x44
> +#define DPHYID 0x100
> +
> +#define DPHY_DEFAULT_FREQ 300000
> +
> +enum glueiftester {
> +	RESET = 0x0,
> +	TX_PHY = 0x1,
> +	RX_PHY = 0x2,
> +	GLUELOGIC = 0x4,
> +};
> +#endif
> +
> +/**
> + * struct phy		specifies associated phy component
> + * struct cfg		to pass mipi dphy specific configurations
> + * @lanes_config	lanes configuration
> + * @dphy_freq		operating frequency of the d-phy (mbps)
> + * @phy_type		dphy can be of two types, passed here
> + * @dphy_gen		dphy can be of three generations, passed here
> + * @dphy_te_len		bus width
> + * @max_lanes		maximum number of lanes
> + * @lp_time		time in low-power
> + * @base_address	memmory address of dphy test interface
> + * @dphy1_if_addr	gluelogic dphy 1 memmory address of interface
> + * @dphy2_if_addr	gluelogic dphy 2 memmory address of interface
> + * @config_8l		eight lanes configuration
> + */
> +
> +struct dw_dphy_rx {
> +	struct phy *phy;
> +	struct phy_configure_opts_mipi_dphy *cfg;
> +	u32 lanes_config;
> +	u32 dphy_freq;
> +	u32 phy_type;
> +	u32 dphy_gen;
> +	u32 dphy_te_len;
> +	u32 max_lanes;
> +	u32 lp_time;
> +	void __iomem *base_address;
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	void __iomem *dphy1_if_addr;
> +	void __iomem *dphy2_if_addr;
> +	u8 config_8l;
> +	u8 (*get_config_8l)(struct device *dev, struct dw_dphy_rx *dphy);
> +#endif
> +	u8 (*phy_register)(struct device *dev);
> +	void (*phy_unregister)(struct device *dev);
> +};
> +
> +int dw_dphy_init(struct phy *phy);
> +int dw_dphy_reset(struct phy *phy);
> +int dw_dphy_power_off(struct phy *phy);
> +int dw_dphy_power_on(struct phy *phy);
> +u8 dw_dphy_setup_config(struct dw_dphy_rx *dphy);
> +void dw_dphy_write(struct dw_dphy_rx *dphy, u32 address, u32 data);
> +u32 dw_dphy_read(struct dw_dphy_rx *dphy, u32 address);
> +int dw_dphy_te_read(struct dw_dphy_rx *dphy, u32 addr);

This looks quite like what could fit under the PHY API. Have you considered
that?

> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +u32 dw_dphy_if_read(struct dw_dphy_rx *dphy, u32 address);
> +int dw_dphy_if_get_idelay(struct dw_dphy_rx *dphy);
> +int dw_dphy_if_set_idelay_lane(struct dw_dphy_rx *dphy, u8 dly, u8 lane);
> +int dw_dphy_create_capabilities_sysfs(struct platform_device *pdev);
> +
> +static inline
> +u32 dw_dphy_if_read_msk(struct dw_dphy_rx *dphy,
> +			u32 address, u8 shift, u8 width)
> +{
> +	return (dw_dphy_if_read(dphy, address) >> shift) & ((1 << width) - 1);
> +}
> +#endif /*IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)*/
> +
> +static inline struct phy *dw_dphy_xlate(struct device *dev,
> +					struct of_phandle_args *args)
> +{
> +	struct dw_dphy_rx *dphy = dev_get_drvdata(dev);
> +
> +	return dphy->phy;
> +}
> +
> +static inline
> +u32 dw_dphy_read_msk(struct dw_dphy_rx *dev, u32 address, u8 shift,  u8 width)
> +{
> +	return (dw_dphy_read(dev, address) >> shift) & ((1 << width) - 1);
> +}
> +#endif /*__PHY_SNPS_DPHY_RX_H__*/
> diff --git a/drivers/media/platform/dwc/dw-dphy-sysfs.c b/drivers/media/platform/dwc/dw-dphy-sysfs.c
> new file mode 100644
> index 000000000000..416dec85cc49
> --- /dev/null
> +++ b/drivers/media/platform/dwc/dw-dphy-sysfs.c
> @@ -0,0 +1,232 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018-2019 Synopsys, Inc. and/or its affiliates.
> + *
> + * Synopsys DesignWare MIPI D-PHY controller driver.
> + * SysFS components for the platform driver
> + *
> + * Author: Luis Oliveira <luis.oliveira@synopsys.com>
> + */
> +
> +#include "dw-dphy-rx.h"
> +
> +static ssize_t dphy_reset_show(struct device *dev,
> +			       struct device_attribute *attr, char *buf)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	char buffer[15];
> +
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 0);
> +	usleep_range(100, 200);
> +	dw_dphy_write(dphy, R_CSI2_DPHY_RSTZ, 1);
> +
> +	return strlcpy(buf, buffer, PAGE_SIZE);
> +}
> +
> +static ssize_t dphy_freq_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf,
> +			       size_t count)
> +{
> +	int ret;
> +	unsigned long freq;
> +
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +
> +	ret = kstrtoul(buf, 10, &freq);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (freq > 2500) {
> +		dev_info(dev, "Freq must be under 2500 Mhz\n");
> +		return count;
> +	}
> +	if (freq < 80) {
> +		dev_info(dev, "Freq must be over 80 Mhz\n");
> +		return count;
> +	}
> +
> +	dev_vdbg(dev, "Data Rate %lu Mbps\n", freq);
> +	dphy->dphy_freq = freq;
> +
> +	return count;
> +}
> +
> +static ssize_t dphy_freq_show(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	char buffer[15];
> +
> +	snprintf(buffer,
> +		 sizeof(buffer),
> +		 "Freq %d\n", dphy->dphy_freq);
> +
> +	return strlcpy(buf, buffer, PAGE_SIZE);
> +}
> +
> +static ssize_t dphy_addr_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf,
> +			       size_t count)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	unsigned long val;
> +	u8 addr, payload;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 32, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	payload = (u16)val;
> +	addr = (u16)(val >> 16);
> +
> +	dev_vdbg(dev, "addr 0x%lX\n", val);
> +	dev_vdbg(dev, "payload: 0x%X\n", addr);
> +	dev_vdbg(dev, "Addr [0x%x] -> 0x%x\n", (unsigned int)addr,
> +		 dw_dphy_te_read(dphy, addr));
> +
> +	return count;
> +}
> +
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +static ssize_t idelay_show(struct device *dev, struct device_attribute *attr,
> +			   char *buf)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	char buffer[15];
> +
> +	snprintf(buffer,
> +		 sizeof(buffer), "idelay %d\n", dw_dphy_if_get_idelay(dphy));
> +
> +	return strlcpy(buf, buffer, PAGE_SIZE);
> +}
> +
> +static ssize_t idelay_store(struct device *dev, struct device_attribute *attr,
> +			    const char *buf, size_t count)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	unsigned long val;
> +	u8 lane, delay;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 16, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	lane = (u8)val;
> +	delay = (u8)(val >> 8);
> +
> +	dev_vdbg(dev, "Lanes %u\n", lane);
> +	dev_vdbg(dev, "Delay %u\n", delay);
> +
> +	dw_dphy_if_set_idelay_lane(dphy, delay, lane);
> +
> +	return count;
> +}
> +#endif
> +
> +static ssize_t len_config_store(struct device *dev,
> +				struct device_attribute *attr,
> +				const char *buf,
> +				size_t count)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	unsigned long length;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 10, &length);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (length == BIT8)
> +		dev_vdbg(dev, "Configured for 8-bit interface\n");
> +	else if (length == BIT12)
> +		dev_vdbg(dev, "Configured for 12-bit interface\n");
> +	else
> +		return count;
> +
> +	dphy->dphy_te_len = length;
> +
> +	return count;
> +}
> +
> +static ssize_t len_config_show(struct device *dev,
> +			       struct device_attribute *attr, char *buf)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	char buffer[20];
> +
> +	snprintf(buffer, sizeof(buffer), "Length %d\n", dphy->dphy_te_len);
> +
> +	return strlcpy(buf, buffer, PAGE_SIZE);
> +}
> +
> +static ssize_t dw_dphy_g118_settle_store(struct device *dev,
> +					 struct device_attribute *attr,
> +					 const char *buf, size_t count)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	unsigned long lp_time;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 10, &lp_time);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (lp_time > 1 && lp_time < 10000) {
> +		dphy->lp_time = lp_time;
> +	} else {
> +		dev_vdbg(dev, "Invalid Value configuring for 1000 ns\n");
> +		dphy->lp_time = 1000;
> +	}
> +
> +	dphy->lp_time = lp_time;
> +
> +	return count;
> +}
> +
> +static ssize_t dw_dphy_g118_settle_show(struct device *dev,
> +					struct device_attribute *attr,
> +					char *buf)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct dw_dphy_rx *dphy = platform_get_drvdata(pdev);
> +	char buffer[10];
> +
> +	snprintf(buffer, sizeof(buffer), "Settle %d ns\n", dphy->lp_time);
> +
> +	return strlcpy(buf, buffer, PAGE_SIZE);
> +}
> +
> +static DEVICE_ATTR_RO(dphy_reset);
> +static DEVICE_ATTR_RW(dphy_freq);
> +static DEVICE_ATTR_WO(dphy_addr);
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +static DEVICE_ATTR_RW(idelay);
> +#endif
> +static DEVICE_ATTR_RW(len_config);
> +static DEVICE_ATTR_RW(dw_dphy_g118_settle);

Is it necessary to provide such an API to the user space? This should
probably not be there...

> +
> +int dw_dphy_create_capabilities_sysfs(struct platform_device *pdev)
> +{
> +	device_create_file(&pdev->dev, &dev_attr_dphy_reset);
> +	device_create_file(&pdev->dev, &dev_attr_dphy_freq);
> +	device_create_file(&pdev->dev, &dev_attr_dphy_addr);
> +#if IS_ENABLED(CONFIG_DWC_MIPI_TC_DPHY_GEN3)
> +	device_create_file(&pdev->dev, &dev_attr_idelay);
> +#endif
> +	device_create_file(&pdev->dev, &dev_attr_len_config);
> +	device_create_file(&pdev->dev, &dev_attr_dw_dphy_g118_settle);
> +	return 0;
> +}
> diff --git a/include/media/dwc/dw-dphy-data.h b/include/media/dwc/dw-dphy-data.h
> new file mode 100644
> index 000000000000..c8d6c0f90935
> --- /dev/null
> +++ b/include/media/dwc/dw-dphy-data.h
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018-2019 Synopsys, Inc. and/or its affiliates.
> + *
> + * Synopsys DesignWare MIPI D-PHY platform data
> + *
> + * Author: Luis Oliveira <Luis.Oliveira@synopsys.com>
> + */
> +
> +#include <linux/phy/phy.h>
> +#include <linux/kernel.h>
> +#include <media/dwc/dw-mipi-csi-pltfrm.h>
> +
> +struct dw_phy_pdata {
> +	u32 dphy_frequency;
> +	u8 dphy_te_len;
> +	u32 config_8l;
> +	u8 dphy_gen;
> +	u8 phy_type;
> +	u8 id;
> +};
> +
> +static const struct pdata_names phys[] = {
> +	{ .name = "phy-dw-dphy.0.0", },
> +	{ .name = "phy-dw-dphy.1.1", },
> +};
> +
> +struct dw_dphy_rx;
> +
> +struct plat_dw_dphy {
> +	int (*get_resources)(struct device *dev, struct dw_dphy_rx *dphy);
> +};