ata:libata-eh:Cleanup ata_scsi_cmd_error_handler

Message ID 20221215100959.1926459-1-haowenchao@huawei.com
State New
Headers
Series ata:libata-eh:Cleanup ata_scsi_cmd_error_handler |

Commit Message

Wenchao Hao Dec. 15, 2022, 10:09 a.m. UTC
  If ap->ops->error_handler is NULL, just go out and release the
spinlock. This patch is just a cleanup, which would not change
the origin error handle logic.

Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
---
 drivers/ata/libata-eh.c | 96 ++++++++++++++++++++---------------------
 1 file changed, 48 insertions(+), 48 deletions(-)
  

Comments

Wenchao Hao Dec. 15, 2022, 10:57 a.m. UTC | #1
On 2022/12/15 18:09, Wenchao Hao wrote:
> If ap->ops->error_handler is NULL, just go out and release the
> spinlock. This patch is just a cleanup, which would not change
> the origin error handle logic.
> 
> Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
> ---
>  drivers/ata/libata-eh.c | 96 ++++++++++++++++++++---------------------
>  1 file changed, 48 insertions(+), 48 deletions(-)
> 
Sorry, I send the wrong patch file, please ignore it
  

Patch

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 34303ce67c14..66ca3ac7cd58 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -565,6 +565,8 @@  void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
 {
 	int i;
 	unsigned long flags;
+	struct scsi_cmnd *scmd, *tmp;
+	int nr_timedout = 0;
 
 	/* make sure sff pio task is not running */
 	ata_sff_flush_pio_task(ap);
@@ -584,62 +586,60 @@  void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
 	 * timed out iff its associated qc is active and not failed.
 	 */
 	spin_lock_irqsave(ap->lock, flags);
-	if (ap->ops->error_handler) {
-		struct scsi_cmnd *scmd, *tmp;
-		int nr_timedout = 0;
-
-		/* This must occur under the ap->lock as we don't want
-		   a polled recovery to race the real interrupt handler
-
-		   The lost_interrupt handler checks for any completed but
-		   non-notified command and completes much like an IRQ handler.
-
-		   We then fall into the error recovery code which will treat
-		   this as if normal completion won the race */
+	if (!ap->ops->error_handler)
+		goto out;
 
-		if (ap->ops->lost_interrupt)
-			ap->ops->lost_interrupt(ap);
+	/* This must occur under the ap->lock as we don't want
+	 * a polled recovery to race the real interrupt handler
+	 *
+	 * The lost_interrupt handler checks for any completed but
+	 * non-notified command and completes much like an IRQ handler.
+	 *
+	 * We then fall into the error recovery code which will treat
+	 * this as if normal completion won the race
+	 */
+	if (ap->ops->lost_interrupt)
+		ap->ops->lost_interrupt(ap);
 
-		list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) {
-			struct ata_queued_cmd *qc;
+	list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) {
+		struct ata_queued_cmd *qc;
 
-			ata_qc_for_each_raw(ap, qc, i) {
-				if (qc->flags & ATA_QCFLAG_ACTIVE &&
-				    qc->scsicmd == scmd)
-					break;
-			}
+		ata_qc_for_each_raw(ap, qc, i) {
+			if (qc->flags & ATA_QCFLAG_ACTIVE &&
+			    qc->scsicmd == scmd)
+				break;
+		}
 
-			if (i < ATA_MAX_QUEUE) {
-				/* the scmd has an associated qc */
-				if (!(qc->flags & ATA_QCFLAG_FAILED)) {
-					/* which hasn't failed yet, timeout */
-					qc->err_mask |= AC_ERR_TIMEOUT;
-					qc->flags |= ATA_QCFLAG_FAILED;
-					nr_timedout++;
-				}
-			} else {
-				/* Normal completion occurred after
-				 * SCSI timeout but before this point.
-				 * Successfully complete it.
-				 */
-				scmd->retries = scmd->allowed;
-				scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+		if (i < ATA_MAX_QUEUE) {
+			/* the scmd has an associated qc */
+			if (!(qc->flags & ATA_QCFLAG_FAILED)) {
+				/* which hasn't failed yet, timeout */
+				qc->err_mask |= AC_ERR_TIMEOUT;
+				qc->flags |= ATA_QCFLAG_FAILED;
+				nr_timedout++;
 			}
+		} else {
+			/* Normal completion occurred after
+			 * SCSI timeout but before this point.
+			 * Successfully complete it.
+			 */
+			scmd->retries = scmd->allowed;
+			scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
 		}
+	}
 
-		/* If we have timed out qcs.  They belong to EH from
-		 * this point but the state of the controller is
-		 * unknown.  Freeze the port to make sure the IRQ
-		 * handler doesn't diddle with those qcs.  This must
-		 * be done atomically w.r.t. setting QCFLAG_FAILED.
-		 */
-		if (nr_timedout)
-			__ata_port_freeze(ap);
-
+	/* If we have timed out qcs.  They belong to EH from
+	 * this point but the state of the controller is
+	 * unknown.  Freeze the port to make sure the IRQ
+	 * handler doesn't diddle with those qcs.  This must
+	 * be done atomically w.r.t. setting QCFLAG_FAILED.
+	 */
+	if (nr_timedout)
+		__ata_port_freeze(ap);
 
-		/* initialize eh_tries */
-		ap->eh_tries = ATA_EH_MAX_TRIES;
-	}
+	/* initialize eh_tries */
+	ap->eh_tries = ATA_EH_MAX_TRIES;
+out:
 	spin_unlock_irqrestore(ap->lock, flags);
 
 }