diff mbox series

[v5,22/34] dt-bindings: pinctrl: qcom,msm8953: use common TLMM schema

Message ID 20221016170035.35014-23-krzysztof.kozlowski@linaro.org
State New
Headers
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (third set) |

Commit Message

Krzysztof Kozlowski Oct. 16, 2022, 5 p.m. UTC 
  Reference common Qualcomm TLMM pin controller schema, to bring common
properties, other pinctrl schemas and additional checks, like function
required only for GPIOs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes since v4:
1. Drop drive-strength (included by common TLMM node).

Changes since v3:
1. Drop properties and required items which are already provided by
   common TLMM schema.
---
 .../pinctrl/qcom,msm8953-pinctrl.yaml         | 46 +++----------------
 1 file changed, 7 insertions(+), 39 deletions(-)

Comments

Krzysztof Kozlowski Oct. 17, 2022, 8:08 p.m. UTC | #1 
On Sun, 16 Oct 2022 13:00:23 -0400, Krzysztof Kozlowski wrote:
> Reference common Qualcomm TLMM pin controller schema, to bring common
> properties, other pinctrl schemas and additional checks, like function
> required only for GPIOs.
> 
> 

Applied, thanks!

[22/34] dt-bindings: pinctrl: qcom,msm8953: use common TLMM schema
        https://git.kernel.org/krzk/linux-dt/c/f695e8d8c8e45ed8d8b563dcd656df326d44707e

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index c162796ab604..03f1cc783659 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -20,29 +20,13 @@  properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
   gpio-reserved-ranges: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
+  "#gpio-cells": true
+  gpio-ranges: true
 
 patternProperties:
   "-state$":
@@ -59,7 +43,7 @@  $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -121,40 +105,24 @@  $defs:
                 uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
                 wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false