new file mode 100644
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
+
+maintainers:
+ - Marcin Wojtas <mw@semihalf.com>
+ - Russell King <linux@armlinux.org>
+
+description: |
+ Marvell Armada 375 Ethernet Controller (PPv2.1)
+ Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+ Marvell CN913X Ethernet Controller (PPv2.3)
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-375-pp2
+ - marvell,armada-7k-pp22
+
+ reg:
+ minItems: 3
+ maxItems: 4
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clocks:
+ minItems: 2
+ items:
+ - description: main controller clock
+ - description: GOP clock
+ - description: MG clock
+ - description: MG Core clock
+ - description: AXI clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: pp_clk
+ - const: gop_clk
+ - const: mg_clk
+ - const: mg_core_clk
+ - const: axi_clk
+
+ dma-coherent: true
+
+ marvell,system-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to the system controller.
+
+patternProperties:
+ '^(ethernet-)?port@[0-2]$':
+ type: object
+ description: subnode for each ethernet port.
+ $ref: ethernet-controller.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: ID of the port from the MAC point of view.
+ maximum: 2
+
+ interrupts:
+ minItems: 1
+ maxItems: 10
+ description: interrupt(s) for the port
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: hif0
+ - const: hif1
+ - const: hif2
+ - const: hif3
+ - const: hif4
+ - const: hif5
+ - const: hif6
+ - const: hif7
+ - const: hif8
+ - const: link
+
+ description: >
+ if more than a single interrupt for is given, must be the
+ name associated to the interrupts listed. Valid names are:
+ "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+ "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+ for backward compatibility but shouldn't be used for new
+ additions.
+
+ phys:
+ minItems: 1
+ maxItems: 2
+ description: >
+ Generic PHY, providing SerDes connectivity. For most modes,
+ one lane is sufficient, but some (e.g. RXAUI) may require two.
+
+ phy-mode:
+ enum:
+ - gmii
+ - sgmii
+ - rgmii-id
+ - 1000base-x
+ - 2500base-x
+ - 5gbase-r
+ - rxaui
+ - 10gbase-r
+
+ port-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description: >
+ ID of the port from the MAC point of view.
+ Legacy binding for backward compatibility.
+
+ marvell,loopback:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: port is loopback mode.
+
+ gop-port-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ only for marvell,armada-7k-pp22, ID of the port from the
+ GOP (Group Of Ports) point of view. This ID is used to index the
+ per-port registers in the second register area.
+
+ required:
+ - reg
+ - interrupts
+ - phy-mode
+ - port-id
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: marvell,armada-7k-pp22
+ then:
+ properties:
+ reg:
+ items:
+ - description: Packet Processor registers
+ - description: Networking interfaces registers
+ - description: CM3 address space used for TX Flow Control
+
+ clocks:
+ minItems: 5
+
+ clock-names:
+ minItems: 5
+
+ patternProperties:
+ '^(ethernet-)?port@[0-2]$':
+ required:
+ - gop-port-id
+
+ required:
+ - marvell,system-controller
+ else:
+ properties:
+ reg:
+ items:
+ - description: Packet Processor registers
+ - description: LMS registers
+ - description: Register area per eth0
+ - description: Register area per eth1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ patternProperties:
+ '^(ethernet-)?port@[0-1]$':
+ properties:
+ reg:
+ maximum: 1
+
+ gop-port-id: false
+
+additionalProperties: false
+
+examples:
+ - |
+ // For Armada 375 variant
+ #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@f0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,armada-375-pp2";
+ reg = <0xf0000 0xa000>,
+ <0xc0000 0x3060>,
+ <0xc4000 0x100>,
+ <0xc5000 0x100>;
+ clocks = <&gateclk 3>, <&gateclk 19>;
+ clock-names = "pp_clk", "gop_clk";
+
+ ethernet-port@0 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0>;
+ port-id = <0>; /* For backward compatibility. */
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet-port@1 {
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <1>;
+ port-id = <1>; /* For backward compatibility. */
+ phy = <&phy3>;
+ phy-mode = "gmii";
+ };
+ };
+
+ - |
+ // For Armada 7k/8k and Cn913x variants
+ #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+ clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>,
+ <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
+ marvell,system-controller = <&cp0_syscon0>;
+
+ ethernet-port@0 {
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
+ phy-mode = "10gbase-r";
+ phys = <&cp0_comphy4 0>;
+ reg = <0>;
+ port-id = <0>; /* For backward compatibility. */
+ gop-port-id = <0>;
+ };
+
+ ethernet-port@1 {
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
+ phy-mode = "rgmii-id";
+ reg = <1>;
+ port-id = <1>; /* For backward compatibility. */
+ gop-port-id = <2>;
+ };
+
+ ethernet-port@2 {
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ phys = <&cp0_comphy5 2>;
+ sfp = <&sfp_eth3>;
+ reg = <2>;
+ port-id = <2>; /* For backward compatibility. */
+ gop-port-id = <3>;
+ };
+ };
deleted file mode 100644
@@ -1,141 +0,0 @@
-* Marvell Armada 375 Ethernet Controller (PPv2.1)
- Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
- Marvell CN913X Ethernet Controller (PPv2.3)
-
-Required properties:
-
-- compatible: should be one of:
- "marvell,armada-375-pp2"
- "marvell,armada-7k-pp2"
-- reg: addresses and length of the register sets for the device.
- For "marvell,armada-375-pp2", must contain the following register
- sets:
- - common controller registers
- - LMS registers
- - one register area per Ethernet port
- For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
- sets:
- - packet processor registers
- - networking interfaces registers
- - CM3 address space used for TX Flow Control
-
-- clocks: pointers to the reference clocks for this device, consequently:
- - main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- - GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- - MG clock (only for armada-7k-pp2)
- - MG Core clock (only for armada-7k-pp2)
- - AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
- "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
-
-The ethernet ports are represented by subnodes. At least one port is
-required.
-
-Required properties (port):
-
-- interrupts: interrupt(s) for the port
-- port-id: ID of the port from the MAC point of view
-- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
- GOP (Group Of Ports) point of view. This ID is used to index the
- per-port registers in the second register area.
-- phy-mode: See ethernet.txt file in the same directory
-
-Optional properties (port):
-
-- marvell,loopback: port is loopback mode
-- phy: a phandle to a phy node defining the PHY address (as the reg
- property, a single integer).
-- interrupt-names: if more than a single interrupt for is given, must be the
- name associated to the interrupts listed. Valid names are:
- "hifX", with X in [0..8], and "link". The names "tx-cpu0",
- "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
- for backward compatibility but shouldn't be used for new
- additions.
-- marvell,system-controller: a phandle to the system controller.
-
-Example for marvell,armada-375-pp2:
-
-ethernet@f0000 {
- compatible = "marvell,armada-375-pp2";
- reg = <0xf0000 0xa000>,
- <0xc0000 0x3060>,
- <0xc4000 0x100>,
- <0xc5000 0x100>;
- clocks = <&gateclk 3>, <&gateclk 19>;
- clock-names = "pp_clk", "gop_clk";
-
- eth0: eth0@c4000 {
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <0>;
- phy = <&phy0>;
- phy-mode = "gmii";
- };
-
- eth1: eth1@c5000 {
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <1>;
- phy = <&phy3>;
- phy-mode = "gmii";
- };
-};
-
-Example for marvell,armada-7k-pp2:
-
-cpm_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
- <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
- clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-
- eth0: eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
- "hif5", "hif6", "hif7", "hif8", "link";
- port-id = <0>;
- gop-port-id = <0>;
- };
-
- eth1: eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
- "hif5", "hif6", "hif7", "hif8", "link";
- port-id = <1>;
- gop-port-id = <2>;
- };
-
- eth2: eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
- "hif5", "hif6", "hif7", "hif8", "link";
- port-id = <2>;
- gop-port-id = <3>;
- };
-};
@@ -12292,7 +12292,7 @@ M: Marcin Wojtas <mw@semihalf.com>
M: Russell King <linux@armlinux.org.uk>
L: netdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/net/marvell-pp2.txt
+F: Documentation/devicetree/bindings/net/marvell,pp2.yaml
F: drivers/net/ethernet/marvell/mvpp2/
MARVELL MWIFIEX WIRELESS DRIVER