[v8,02/11] clk: meson: a1: add support for Amlogic A1 PLL clock driver
Commit Message
From: Jian Hu <jian.hu@amlogic.com>
The Amlogic A1 clock includes three drivers:
pll clocks, peripheral clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.
Unlike the previous series, there is no EE/AO domain
in A1 CLK controllers.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
drivers/clk/meson/Kconfig | 9 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/a1-pll.c | 360 +++++++++++++++++++++++++++++++++++++
drivers/clk/meson/a1-pll.h | 56 ++++++
4 files changed, 426 insertions(+)
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
Comments
On Fri 02 Dec 2022 at 01:56, Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
> From: Jian Hu <jian.hu@amlogic.com>
>
> The Amlogic A1 clock includes three drivers:
> pll clocks, peripheral clocks, CPU clocks.
> sys pll and CPU clocks will be sent in next patch.
>
> Unlike the previous series, there is no EE/AO domain
> in A1 CLK controllers.
>
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
> ---
> drivers/clk/meson/Kconfig | 9 +
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/a1-pll.c | 360 +++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/a1-pll.h | 56 ++++++
> 4 files changed, 426 insertions(+)
> create mode 100644 drivers/clk/meson/a1-pll.c
> create mode 100644 drivers/clk/meson/a1-pll.h
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index fc002c155bc3..ab34662b24f0 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -99,6 +99,15 @@ config COMMON_CLK_AXG_AUDIO
> Support for the audio clock controller on AmLogic A113D devices,
> aka axg, Say Y if you want audio subsystem to work.
>
> +config COMMON_CLK_A1_PLL
> + bool
Could you add a tristate with some text please ?
> + depends on ARCH_MESON
> + select COMMON_CLK_MESON_REGMAP
> + select COMMON_CLK_MESON_PLL
> + help
> + Support for the PLL clock controller on Amlogic A113L device,
> + aka a1. Say Y if you want PLL to work.
> +
> config COMMON_CLK_G12A
> tristate "G12 and SM1 SoC clock controllers support"
> depends on ARM64
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 6eca2a406ee3..2f17f475a48f 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
>
> obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
> obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> +obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
> diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
> new file mode 100644
> index 000000000000..69c1ca07d041
> --- /dev/null
> +++ b/drivers/clk/meson/a1-pll.c
> @@ -0,0 +1,360 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + * Author: Jian Hu <jian.hu@amlogic.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include "a1-pll.h"
> +#include "clk-pll.h"
> +#include "clk-regmap.h"
> +
> +static struct clk_regmap a1_fixed_pll_dco = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_FIXPLL_CTRL1,
> + .shift = 0,
> + .width = 19,
> + },
> + .l = {
> + .reg_off = ANACTRL_FIXPLL_STS,
> + .shift = 31,
> + .width = 1,
> + },
> + .rst = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 29,
> + .width = 1,
> + },
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fixed_pll_dco",
> + .ops = &meson_clk_pll_ro_ops,
> + .parent_data = &(const struct clk_parent_data) {
> + .fw_name = "xtal_fixpll",
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a1_fixed_pll = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL0,
> + .bit_idx = 20,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "fixed_pll",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fixed_pll_dco.hw
> + },
> + .num_parents = 1,
> + /*
> + * It is enough that the fdiv leaf has critical flag,
> + * No critical or unused flag here.
> + */
> + },
> +};
> +
> +static const struct pll_mult_range a1_hifi_pll_mult_range = {
> + .min = 32,
> + .max = 64,
> +};
> +
> +static const struct reg_sequence a1_hifi_init_regs[] = {
> + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
> + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
> + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
> + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
> + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 },
> +};
> +
> +static struct clk_regmap a1_hifi_pll = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL1,
> + .shift = 0,
> + .width = 19,
> + },
> + .l = {
> + .reg_off = ANACTRL_HIFIPLL_STS,
> + .shift = 31,
> + .width = 1,
> + },
> + .current_en = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 26,
> + .width = 1,
> + },
> + .l_detect = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL2,
> + .shift = 6,
> + .width = 1,
> + },
> + .range = &a1_hifi_pll_mult_range,
> + .init_regs = a1_hifi_init_regs,
> + .init_count = ARRAY_SIZE(a1_hifi_init_regs),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "hifi_pll",
> + .ops = &meson_clk_pll_ops,
> + .parent_data = &(const struct clk_parent_data) {
> + .fw_name = "xtal_hifipll",
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_fixed_factor a1_fclk_div2_div = {
> + .mult = 1,
> + .div = 2,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div2_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fixed_pll.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a1_fclk_div2 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL0,
> + .bit_idx = 21,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div2",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fclk_div2_div.hw
> + },
> + .num_parents = 1,
> + /*
> + * This clock is used by DDR clock in BL2 firmware
> + * and is required by the platform to operate correctly.
> + * Until the following condition are met, we need this clock to
> + * be marked as critical:
> + * a) Mark the clock used by a firmware resource, if possible
> + * b) CCF has a clock hand-off mechanism to make the sure the
> + * clock stays on until the proper driver comes along
> + */
> + .flags = CLK_IS_CRITICAL,
> + },
> +};
> +
> +static struct clk_fixed_factor a1_fclk_div3_div = {
> + .mult = 1,
> + .div = 3,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div3_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fixed_pll.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a1_fclk_div3 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL0,
> + .bit_idx = 22,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div3",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fclk_div3_div.hw
> + },
> + .num_parents = 1,
> + /*
> + * This clock is used by APB bus which is set in boot ROM code
> + * and is required by the platform to operate correctly.
> + * About critical, refer to a1_fclk_div2.
> + */
> + .flags = CLK_IS_CRITICAL,
> + },
> +};
> +
> +static struct clk_fixed_factor a1_fclk_div5_div = {
> + .mult = 1,
> + .div = 5,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div5_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fixed_pll.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a1_fclk_div5 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL0,
> + .bit_idx = 23,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div5",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fclk_div5_div.hw
> + },
> + .num_parents = 1,
> + /*
> + * This clock is used by AXI bus which setted in Romcode
> + * and is required by the platform to operate correctly.
> + * About critical, refer to a1_fclk_div2.
> + */
> + .flags = CLK_IS_CRITICAL,
> + },
> +};
> +
> +static struct clk_fixed_factor a1_fclk_div7_div = {
> + .mult = 1,
> + .div = 7,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div7_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fixed_pll.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap a1_fclk_div7 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL0,
> + .bit_idx = 24,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div7",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &a1_fclk_div7_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +/* Array of all clocks provided by this provider */
> +static struct clk_hw_onecell_data a1_pll_hw_onecell_data = {
> + .hws = {
> + [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw,
> + [CLKID_FIXED_PLL] = &a1_fixed_pll.hw,
> + [CLKID_HIFI_PLL] = &a1_hifi_pll.hw,
> + [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw,
> + [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw,
> + [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw,
> + [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw,
> + [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw,
> + [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw,
> + [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw,
> + [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw,
> + [NR_PLL_CLKS] = NULL,
> + },
> + .num = NR_PLL_CLKS,
> +};
> +
> +static struct clk_regmap *const a1_pll_regmaps[] = {
> + &a1_fixed_pll_dco,
> + &a1_fixed_pll,
> + &a1_hifi_pll,
> + &a1_fclk_div2,
> + &a1_fclk_div3,
> + &a1_fclk_div5,
> + &a1_fclk_div7,
> +};
> +
> +static struct regmap_config clkc_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> +static int meson_a1_pll_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + void __iomem *base;
> + struct regmap *map;
> + int ret, i;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
devm_platform_ioremap_resource ?
> +
> + map = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
> + if (IS_ERR(map))
> + return PTR_ERR(map);
> +
> + /* Populate regmap for the regmap backed clocks */
> + for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++)
> + a1_pll_regmaps[i]->map = map;
> +
> + for (i = 0; i < a1_pll_hw_onecell_data.num; i++) {
> + /* array might be sparse */
> + if (!a1_pll_hw_onecell_data.hws[i])
> + continue;
> +
> + ret = devm_clk_hw_register(dev, a1_pll_hw_onecell_data.hws[i]);
> + if (ret) {
> + dev_err(dev, "Clock registration failed\n");
> + return ret;
> + }
> + }
> +
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> + &a1_pll_hw_onecell_data);
> +}
> +
> +static const struct of_device_id clkc_match_table[] = {
> + { .compatible = "amlogic,a1-pll-clkc", },
> + {}
> +};
> +
> +static struct platform_driver a1_pll_driver = {
> + .probe = meson_a1_pll_probe,
> + .driver = {
> + .name = "a1-pll-clkc",
> + .of_match_table = clkc_match_table,
> + },
> +};
> +
> +builtin_platform_driver(a1_pll_driver);
> diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
> new file mode 100644
> index 000000000000..8ded267061ad
> --- /dev/null
> +++ b/drivers/clk/meson/a1-pll.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __A1_PLL_H
> +#define __A1_PLL_H
> +
> +/* PLL register offset */
> +#define ANACTRL_FIXPLL_CTRL0 0x0
> +#define ANACTRL_FIXPLL_CTRL1 0x4
> +#define ANACTRL_FIXPLL_CTRL2 0x8
> +#define ANACTRL_FIXPLL_CTRL3 0xc
> +#define ANACTRL_FIXPLL_CTRL4 0x10
> +#define ANACTRL_FIXPLL_STS 0x14
> +#define ANACTRL_SYSPLL_CTRL0 0x80
> +#define ANACTRL_SYSPLL_CTRL1 0x84
> +#define ANACTRL_SYSPLL_CTRL2 0x88
> +#define ANACTRL_SYSPLL_CTRL3 0x8c
> +#define ANACTRL_SYSPLL_CTRL4 0x90
> +#define ANACTRL_SYSPLL_STS 0x94
> +#define ANACTRL_HIFIPLL_CTRL0 0xc0
> +#define ANACTRL_HIFIPLL_CTRL1 0xc4
> +#define ANACTRL_HIFIPLL_CTRL2 0xc8
> +#define ANACTRL_HIFIPLL_CTRL3 0xcc
> +#define ANACTRL_HIFIPLL_CTRL4 0xd0
> +#define ANACTRL_HIFIPLL_STS 0xd4
> +#define ANACTRL_AUDDDS_CTRL0 0x100
> +#define ANACTRL_AUDDDS_CTRL1 0x104
> +#define ANACTRL_AUDDDS_CTRL2 0x108
> +#define ANACTRL_AUDDDS_CTRL3 0x10c
> +#define ANACTRL_AUDDDS_CTRL4 0x110
> +#define ANACTRL_AUDDDS_STS 0x114
> +#define ANACTRL_MISCTOP_CTRL0 0x140
> +#define ANACTRL_POR_CNTL 0x188
> +
> +/*
> + * CLKID index values
> + *
> + * These indices are entirely contrived and do not map onto the hardware.
> + * It has now been decided to expose everything by default in the DT header:
> + * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want
> + * to expose, such as the internal muxes and dividers of composite clocks,
> + * will remain defined here.
> + */
> +#define CLKID_FIXED_PLL_DCO 0
> +#define CLKID_FCLK_DIV2_DIV 2
> +#define CLKID_FCLK_DIV3_DIV 3
> +#define CLKID_FCLK_DIV5_DIV 4
> +#define CLKID_FCLK_DIV7_DIV 5
> +#define NR_PLL_CLKS 11
> +
> +/* include the CLKIDs that have been made part of the DT binding */
> +#include <dt-bindings/clock/a1-pll-clkc.h>
> +
> +#endif /* __A1_PLL_H */
On Fri, Dec 02, 2022 at 12:16:12PM +0100, Jerome Brunet wrote:
> > drivers/clk/meson/Kconfig | 9 +
> > drivers/clk/meson/Makefile | 1 +
> > drivers/clk/meson/a1-pll.c | 360 +++++++++++++++++++++++++++++++++++++
> > drivers/clk/meson/a1-pll.h | 56 ++++++
> > 4 files changed, 426 insertions(+)
> > create mode 100644 drivers/clk/meson/a1-pll.c
> > create mode 100644 drivers/clk/meson/a1-pll.h
> >
> > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> > index fc002c155bc3..ab34662b24f0 100644
> > --- a/drivers/clk/meson/Kconfig
> > +++ b/drivers/clk/meson/Kconfig
> > @@ -99,6 +99,15 @@ config COMMON_CLK_AXG_AUDIO
> > Support for the audio clock controller on AmLogic A113D devices,
> > aka axg, Say Y if you want audio subsystem to work.
> >
> > +config COMMON_CLK_A1_PLL
> > + bool
>
> Could you add a tristate with some text please ?
>
Yep... I did it in my fixup patches :-) Looks like it's better to review
the next version with already squashed patches.
@@ -99,6 +99,15 @@ config COMMON_CLK_AXG_AUDIO
Support for the audio clock controller on AmLogic A113D devices,
aka axg, Say Y if you want audio subsystem to work.
+config COMMON_CLK_A1_PLL
+ bool
+ depends on ARCH_MESON
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_PLL
+ help
+ Support for the PLL clock controller on Amlogic A113L device,
+ aka a1. Say Y if you want PLL to work.
+
config COMMON_CLK_G12A
tristate "G12 and SM1 SoC clock controllers support"
depends on ARM64
@@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
new file mode 100644
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1-pll.h"
+#include "clk-pll.h"
+#include "clk-regmap.h"
+
+static struct clk_regmap a1_fixed_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_FIXPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_FIXPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal_fixpll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fixed_pll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fixed_pll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ /*
+ * It is enough that the fdiv leaf has critical flag,
+ * No critical or unused flag here.
+ */
+ },
+};
+
+static const struct pll_mult_range a1_hifi_pll_mult_range = {
+ .min = 32,
+ .max = 64,
+};
+
+static const struct reg_sequence a1_hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 },
+};
+
+static struct clk_regmap a1_hifi_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .current_en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 26,
+ .width = 1,
+ },
+ .l_detect = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL2,
+ .shift = 6,
+ .width = 1,
+ },
+ .range = &a1_hifi_pll_mult_range,
+ .init_regs = a1_hifi_init_regs,
+ .init_count = ARRAY_SIZE(a1_hifi_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hifi_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal_hifipll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div2_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by DDR clock in BL2 firmware
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div3_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by APB bus which is set in boot ROM code
+ * and is required by the platform to operate correctly.
+ * About critical, refer to a1_fclk_div2.
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div5_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by AXI bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * About critical, refer to a1_fclk_div2.
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div7_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data a1_pll_hw_onecell_data = {
+ .hws = {
+ [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw,
+ [CLKID_FIXED_PLL] = &a1_fixed_pll.hw,
+ [CLKID_HIFI_PLL] = &a1_hifi_pll.hw,
+ [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw,
+ [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw,
+ [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw,
+ [NR_PLL_CLKS] = NULL,
+ },
+ .num = NR_PLL_CLKS,
+};
+
+static struct clk_regmap *const a1_pll_regmaps[] = {
+ &a1_fixed_pll_dco,
+ &a1_fixed_pll,
+ &a1_hifi_pll,
+ &a1_fclk_div2,
+ &a1_fclk_div3,
+ &a1_fclk_div5,
+ &a1_fclk_div7,
+};
+
+static struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int meson_a1_pll_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ void __iomem *base;
+ struct regmap *map;
+ int ret, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ map = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++)
+ a1_pll_regmaps[i]->map = map;
+
+ for (i = 0; i < a1_pll_hw_onecell_data.num; i++) {
+ /* array might be sparse */
+ if (!a1_pll_hw_onecell_data.hws[i])
+ continue;
+
+ ret = devm_clk_hw_register(dev, a1_pll_hw_onecell_data.hws[i]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ &a1_pll_hw_onecell_data);
+}
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,a1-pll-clkc", },
+ {}
+};
+
+static struct platform_driver a1_pll_driver = {
+ .probe = meson_a1_pll_probe,
+ .driver = {
+ .name = "a1-pll-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(a1_pll_driver);
new file mode 100644
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __A1_PLL_H
+#define __A1_PLL_H
+
+/* PLL register offset */
+#define ANACTRL_FIXPLL_CTRL0 0x0
+#define ANACTRL_FIXPLL_CTRL1 0x4
+#define ANACTRL_FIXPLL_CTRL2 0x8
+#define ANACTRL_FIXPLL_CTRL3 0xc
+#define ANACTRL_FIXPLL_CTRL4 0x10
+#define ANACTRL_FIXPLL_STS 0x14
+#define ANACTRL_SYSPLL_CTRL0 0x80
+#define ANACTRL_SYSPLL_CTRL1 0x84
+#define ANACTRL_SYSPLL_CTRL2 0x88
+#define ANACTRL_SYSPLL_CTRL3 0x8c
+#define ANACTRL_SYSPLL_CTRL4 0x90
+#define ANACTRL_SYSPLL_STS 0x94
+#define ANACTRL_HIFIPLL_CTRL0 0xc0
+#define ANACTRL_HIFIPLL_CTRL1 0xc4
+#define ANACTRL_HIFIPLL_CTRL2 0xc8
+#define ANACTRL_HIFIPLL_CTRL3 0xcc
+#define ANACTRL_HIFIPLL_CTRL4 0xd0
+#define ANACTRL_HIFIPLL_STS 0xd4
+#define ANACTRL_AUDDDS_CTRL0 0x100
+#define ANACTRL_AUDDDS_CTRL1 0x104
+#define ANACTRL_AUDDDS_CTRL2 0x108
+#define ANACTRL_AUDDDS_CTRL3 0x10c
+#define ANACTRL_AUDDDS_CTRL4 0x110
+#define ANACTRL_AUDDDS_STS 0x114
+#define ANACTRL_MISCTOP_CTRL0 0x140
+#define ANACTRL_POR_CNTL 0x188
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_FIXED_PLL_DCO 0
+#define CLKID_FCLK_DIV2_DIV 2
+#define CLKID_FCLK_DIV3_DIV 3
+#define CLKID_FCLK_DIV5_DIV 4
+#define CLKID_FCLK_DIV7_DIV 5
+#define NR_PLL_CLKS 11
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/a1-pll-clkc.h>
+
+#endif /* __A1_PLL_H */