[v4,3/3] arm64: dts: qcom: sc8280xp-x13s: Add soundcard support

Message ID 20221123104342.26140-4-srinivas.kandagatla@linaro.org
State New
Headers
Series arm64: dts: qcom: sc8280xp: add audio support |

Commit Message

Srinivas Kandagatla Nov. 23, 2022, 10:43 a.m. UTC
  Add support for SoundCard on X13s. This patch adds support for Headset
Playback, record and 2 DMICs on the Panel along with the regulators
required for powering up the LPASS codecs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 213 ++++++++++++++++++
 1 file changed, 213 insertions(+)
  

Comments

Krzysztof Kozlowski Nov. 28, 2022, 12:44 p.m. UTC | #1
On 23/11/2022 11:43, Srinivas Kandagatla wrote:
> +
> +&swr1 {
> +	status = "okay";
> +
> +	wcd_rx: wcd9380-rx@0,4 {
> +		compatible = "sdw20217010d00";
> +		reg = <0 4>;
> +		qcom,rx-port-mapping = <1 2 3 4 5>;
> +	};
> +};
> +
> +&swr2 {
> +	status = "okay";
> +
> +	wcd_tx: wcd9380-tx@0,3 {
> +		compatible = "sdw20217010d00";
> +		reg = <0 3>;
> +		qcom,tx-port-mapping = <1 1 2 3>;

I think I solved my head-phones one-channel problem.
This should be <1 2 3> and in DTSI:
qcom,din-ports = <3>;

The downstream waipio-audio-overlay.dtsi says:

 56                         qcom,swr-port-mapping = <1 SWRM_TX1_CH1 0x1>,
 57                                 <1 SWRM_TX1_CH2 0x2>,
 58                                 <1 SWRM_TX1_CH3 0x4>, <1 SWRM_TX1_CH4 0x8>,
 59                                 <2 SWRM_TX2_CH1 0x1>, <2 SWRM_TX2_CH2 0x2>,
 60                                 <2 SWRM_TX2_CH3 0x4>, <2 SWRM_TX2_CH4 0x8>,
 61                                 <3 SWRM_TX3_CH1 0x1>, <3 SWRM_TX3_CH2 0x2>,
 62                                 <3 SWRM_TX3_CH3 0x4>, <3 SWRM_TX3_CH4 0x8>;

I just don't know what how to trim the port config properties - we
have there four entries, but channels are only three?

Where do these come from? The downstream:
asoc/waipio-port-config.h / lahaina-port-config.h
Do do not have port config for this SWR.



Best regards,
Krzysztof
  
Krzysztof Kozlowski Nov. 28, 2022, 12:58 p.m. UTC | #2
On 28/11/2022 13:44, Krzysztof Kozlowski wrote:
> On 23/11/2022 11:43, Srinivas Kandagatla wrote:
>> +
>> +&swr1 {
>> +	status = "okay";
>> +
>> +	wcd_rx: wcd9380-rx@0,4 {
>> +		compatible = "sdw20217010d00";
>> +		reg = <0 4>;
>> +		qcom,rx-port-mapping = <1 2 3 4 5>;
>> +	};
>> +};
>> +
>> +&swr2 {
>> +	status = "okay";
>> +
>> +	wcd_tx: wcd9380-tx@0,3 {
>> +		compatible = "sdw20217010d00";
>> +		reg = <0 3>;
>> +		qcom,tx-port-mapping = <1 1 2 3>;
> 
> I think I solved my head-phones one-channel problem.
> This should be <1 2 3> and in DTSI:
> qcom,din-ports = <3>;
> 
> The downstream waipio-audio-overlay.dtsi says:
> 
>  56                         qcom,swr-port-mapping = <1 SWRM_TX1_CH1 0x1>,
>  57                                 <1 SWRM_TX1_CH2 0x2>,
>  58                                 <1 SWRM_TX1_CH3 0x4>, <1 SWRM_TX1_CH4 0x8>,
>  59                                 <2 SWRM_TX2_CH1 0x1>, <2 SWRM_TX2_CH2 0x2>,
>  60                                 <2 SWRM_TX2_CH3 0x4>, <2 SWRM_TX2_CH4 0x8>,
>  61                                 <3 SWRM_TX3_CH1 0x1>, <3 SWRM_TX3_CH2 0x2>,
>  62                                 <3 SWRM_TX3_CH3 0x4>, <3 SWRM_TX3_CH4 0x8>;
> 
> I just don't know what how to trim the port config properties - we
> have there four entries, but channels are only three?
> 
> Where do these come from? The downstream:
> asoc/waipio-port-config.h / lahaina-port-config.h
> Do do not have port config for this SWR.

Eh, not sure anymore. My second headphone started to work without these
changes, so I have no clue.

Best regards,
Krzysztof
  
Srinivas Kandagatla Nov. 28, 2022, 3:38 p.m. UTC | #3
On 28/11/2022 12:58, Krzysztof Kozlowski wrote:
> On 28/11/2022 13:44, Krzysztof Kozlowski wrote:
>> On 23/11/2022 11:43, Srinivas Kandagatla wrote:
>>> +
>>> +&swr1 {
>>> +	status = "okay";
>>> +
>>> +	wcd_rx: wcd9380-rx@0,4 {
>>> +		compatible = "sdw20217010d00";
>>> +		reg = <0 4>;
>>> +		qcom,rx-port-mapping = <1 2 3 4 5>;
>>> +	};
>>> +};
>>> +
>>> +&swr2 {
>>> +	status = "okay";
>>> +
>>> +	wcd_tx: wcd9380-tx@0,3 {
>>> +		compatible = "sdw20217010d00";
>>> +		reg = <0 3>;
>>> +		qcom,tx-port-mapping = <1 1 2 3>;
>>
>> I think I solved my head-phones one-channel problem.
>> This should be <1 2 3> and in DTSI:
>> qcom,din-ports = <3>;

WCD938x TX device has 4 SoundWire ports and LPASS TX macro SoundWire 
Master has 3 ports this mapping qcom,tx-port-mapping = <1 1 2 3>; 
defines how wcd device SoundWire ports are connected to SoundWire Master 
port.


>>
>> The downstream waipio-audio-overlay.dtsi says:
>>
>>   56                         qcom,swr-port-mapping = <1 SWRM_TX1_CH1 0x1>,
>>   57                                 <1 SWRM_TX1_CH2 0x2>,
>>   58                                 <1 SWRM_TX1_CH3 0x4>, <1 SWRM_TX1_CH4 0x8>,
>>   59                                 <2 SWRM_TX2_CH1 0x1>, <2 SWRM_TX2_CH2 0x2>,
>>   60                                 <2 SWRM_TX2_CH3 0x4>, <2 SWRM_TX2_CH4 0x8>,
>>   61                                 <3 SWRM_TX3_CH1 0x1>, <3 SWRM_TX3_CH2 0x2>,
>>   62                                 <3 SWRM_TX3_CH3 0x4>, <3 SWRM_TX3_CH4 0x8>;
>>
>> I just don't know what how to trim the port config properties - we
>> have there four entries, but channels are only three?
>>
>> Where do these come from? The downstream:
>> asoc/waipio-port-config.h / lahaina-port-config.h
>> Do do not have port config for this SWR.

yes, that along with dts is the source for this information.

--srini
> 
> Eh, not sure anymore. My second headphone started to work without these
> changes, so I have no clue.
> 
> Best regards,
> Krzysztof
>
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 568c6be1ceaa..eefa22ea1ed7 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -172,6 +172,14 @@  vreg_wwan: regulator-wwan {
 
 		regulator-boot-on;
 	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+		regulator-always-on;
+	};
 };
 
 &apps_rsc {
@@ -181,6 +189,13 @@  pmc8280-1-rpmh-regulators {
 
 		vdd-l3-l5-supply = <&vreg_s11b>;
 
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_s11b: smps11 {
 			regulator-name = "vreg_s11b";
 			regulator-min-microvolt = <1272000>;
@@ -188,6 +203,13 @@  vreg_s11b: smps11 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3b: ldo3 {
 			regulator-name = "vreg_l3b";
 			regulator-min-microvolt = <1200000>;
@@ -216,6 +238,7 @@  vreg_l6b: ldo6 {
 	pmc8280c-rpmh-regulators {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
+		vdd-bob-supply = <&vreg_vph_pwr>;
 
 		vreg_l1c: ldo1 {
 			regulator-name = "vreg_l1c";
@@ -237,6 +260,13 @@  vreg_l13c: ldo13 {
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
 	};
 
 	pmc8280-2-rpmh-regulators {
@@ -596,6 +626,161 @@  &remoteproc_nsp0 {
 	status = "okay";
 };
 
+&soc {
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <1>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-LENOVO-X13S";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"TX DMIC0", "MIC BIAS1",
+		"TX DMIC1", "MIC BIAS2",
+		"TX DMIC2", "MIC BIAS3",
+		"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_default>;
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2{
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_default>;
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s10b>;
+	qcom,dmic-sample-rate = <600000>;
+};
+
 &usb_0 {
 	status = "okay";
 };
@@ -808,6 +993,26 @@  qup2_i2c5_default: qup2-i2c5-default-state {
 		drive-strength = <16>;
 	};
 
+	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
 	tpad_default: tpad-default-state {
 		int-n-pins {
 			pins = "gpio182";
@@ -830,4 +1035,12 @@  reset-n-pins {
 			drive-strength = <16>;
 		};
 	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
 };