[v2] mtd: spi-nor: Add support for BoHong bh25q128as

Message ID 20240220200325.19089-1-ansuelsmth@gmail.com
State New
Headers
Series [v2] mtd: spi-nor: Add support for BoHong bh25q128as |

Commit Message

Christian Marangi Feb. 20, 2024, 8:03 p.m. UTC
  From: David Bauer <mail@david-bauer.net>

Add MTD support for the BoHong bh25q128as SPI NOR chip.
The chip has 16MB of total capacity, divided into a total of 256
sectors, each 64KB sized. The chip also supports 4KB sectors.
Additionally, it supports dual and quad read modes.

Datasheet is public and can be found at the referenced link.

Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.

Link: https://www.e-interlink.com.tw/userUpload/files/BH25Q128AS_v1_0.pdf
Signed-off-by: David Bauer <mail@david-bauer.net>
[ reworked to new flash_info format ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Read/write/erase test are done by flashing and installing an OpenWrt
image on the spi and by using overlayfs on it confirming correct
read/write.

root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/partname 
bh25q128as
root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id 
684018
root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer 
bohong

root@OpenWrt:/# xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
53464450000101ff00000109300000ff68000103600000ffffffffffffff
ffffffffffffffffffffffffffffffffffffe520f1ffffffff0744eb086b
083b42bbeeffffffffff00ffffff44eb0c200f5210d800ffffffffffffff
ffffffffffff003600279ef97764fcebffff

root@OpenWrt:/# sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
e2e374124e998c9c430a5a4c368ded374186637f48301dcb3943b81af2987995  /sys/bus/spi/devices/spi0.0/spi-np

root@OpenWrt:/tmp/tmp2# hexdump -Cv /sys/bus/spi/devices/spi0.0/spi-nor/sfdp 
00000000  53 46 44 50 00 01 01 ff  00 00 01 09 30 00 00 ff  |SFDP........0...|
00000010  68 00 01 03 60 00 00 ff  ff ff ff ff ff ff ff ff  |h...`...........|
00000020  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
00000030  e5 20 f1 ff ff ff ff 07  44 eb 08 6b 08 3b 42 bb  |. ......D..k.;B.|
00000040  ee ff ff ff ff ff 00 ff  ff ff 44 eb 0c 20 0f 52  |..........D.. .R|
00000050  10 d8 00 ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
00000060  00 36 00 27 9e f9 77 64  fc eb ff ff              |.6.'..wd....|
0000006c

root@OpenWrt:/tmp/tmp2# sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
e2e374124e998c9c430a5a4c368ded374186637f48301dcb3943b81af2987995  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp

root@OpenWrt:/tmp/tmp2# cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
Supported read modes by the flash
 1S-1S-1S
  opcode	0x03
  mode cycles	0
  dummy cycles	0
 1S-1S-2S
  opcode	0x3b
  mode cycles	0
  dummy cycles	8
 1S-2S-2S
  opcode	0xbb
  mode cycles	2
  dummy cycles	2
 1S-1S-4S
  opcode	0x6b
  mode cycles	0
  dummy cycles	8
 1S-4S-4S
  opcode	0xeb
  mode cycles	2
  dummy cycles	4

Supported page program modes by the flash
 1S-1S-1S
  opcode	0x02

root@OpenWrt:/tmp/tmp2# cat /sys/kernel/debug/spi-nor/spi0.0/params
name		bh25q128as
id		68 40 18
size		16.0 MiB
write size	1
page size	256
address nbytes	3
flags		HAS_16BIT_SR

opcodes
 read		0x03
  dummy cycles	0
 erase		0xd8
 program	0x02
 8D extension	none

protocols
 read		1S-1S-1S
 write		1S-1S-1S
 register	1S-1S-1S

erase commands
 20 (4.00 KiB) [1]
 52 (32.0 KiB) [2]
 d8 (64.0 KiB) [3]
 c7 (16.0 MiB)

sector map
 region (in hex)   | erase mask | flags
 ------------------+------------+----------
 00000000-00ffffff |     [ 123] | 

Changes v2:
- Drop wrong copyright header
- Drop name
- Add requested info about sfpd and others

 drivers/mtd/spi-nor/Makefile |  1 +
 drivers/mtd/spi-nor/bohong.c | 18 ++++++++++++++++++
 drivers/mtd/spi-nor/core.c   |  1 +
 drivers/mtd/spi-nor/core.h   |  1 +
 4 files changed, 21 insertions(+)
 create mode 100644 drivers/mtd/spi-nor/bohong.c
  

Comments

Michael Walle Feb. 20, 2024, 8:15 p.m. UTC | #1
Hi,

On Tue Feb 20, 2024 at 9:03 PM CET, Christian Marangi wrote:
> From: David Bauer <mail@david-bauer.net>
>
> Add MTD support for the BoHong bh25q128as SPI NOR chip.
> The chip has 16MB of total capacity, divided into a total of 256
> sectors, each 64KB sized. The chip also supports 4KB sectors.
> Additionally, it supports dual and quad read modes.

Thanks for your patch!

> Datasheet is public and can be found at the referenced link.
>
> Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.
>
> Link: https://www.e-interlink.com.tw/userUpload/files/BH25Q128AS_v1_0.pdf
> Signed-off-by: David Bauer <mail@david-bauer.net>
> [ reworked to new flash_info format ]
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> Read/write/erase test are done by flashing and installing an OpenWrt
> image on the spi and by using overlayfs on it confirming correct
> read/write.
>
> root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/partname 
> bh25q128as
> root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id 
> 684018
> root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer 
> bohong
>
> root@OpenWrt:/# xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450000101ff00000109300000ff68000103600000ffffffffffffff
> ffffffffffffffffffffffffffffffffffffe520f1ffffffff0744eb086b
> 083b42bbeeffffffffff00ffffff44eb0c200f5210d800ffffffffffffff
> ffffffffffff003600279ef97764fcebffff

Thanks! That's surprising, because in the past thread we were told,
this flash doesn't have SFDP :) Even better then. But..

>
> root@OpenWrt:/# sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> e2e374124e998c9c430a5a4c368ded374186637f48301dcb3943b81af2987995  /sys/bus/spi/devices/spi0.0/spi-np
>
> root@OpenWrt:/tmp/tmp2# hexdump -Cv /sys/bus/spi/devices/spi0.0/spi-nor/sfdp 
> 00000000  53 46 44 50 00 01 01 ff  00 00 01 09 30 00 00 ff  |SFDP........0...|
> 00000010  68 00 01 03 60 00 00 ff  ff ff ff ff ff ff ff ff  |h...`..........|
> 00000020  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |...............|
> 00000030  e5 20 f1 ff ff ff ff 07  44 eb 08 6b 08 3b 42 bb  |. ......D..k;B.|
> 00000040  ee ff ff ff ff ff 00 ff  ff ff 44 eb 0c 20 0f 52  |..........D. .R|
> 00000050  10 d8 00 ff ff ff ff ff  ff ff ff ff ff ff ff ff  |...............|
> 00000060  00 36 00 27 9e f9 77 64  fc eb ff ff              |.6.'..wd....|
> 0000006c
>
> root@OpenWrt:/tmp/tmp2# sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> e2e374124e998c9c430a5a4c368ded374186637f48301dcb3943b81af2987995  /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
>
> root@OpenWrt:/tmp/tmp2# cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
> Supported read modes by the flash
>  1S-1S-1S
>   opcode	0x03
>   mode cycles	0
>   dummy cycles	0
>  1S-1S-2S
>   opcode	0x3b
>   mode cycles	0
>   dummy cycles	8
>  1S-2S-2S
>   opcode	0xbb
>   mode cycles	2
>   dummy cycles	2
>  1S-1S-4S
>   opcode	0x6b
>   mode cycles	0
>   dummy cycles	8
>  1S-4S-4S
>   opcode	0xeb
>   mode cycles	2
>   dummy cycles	4
>
> Supported page program modes by the flash
>  1S-1S-1S
>   opcode	0x02
>
> root@OpenWrt:/tmp/tmp2# cat /sys/kernel/debug/spi-nor/spi0.0/params
> name		bh25q128as
> id		68 40 18
> size		16.0 MiB
> write size	1
> page size	256
> address nbytes	3
> flags		HAS_16BIT_SR
>
> opcodes
>  read		0x03
>   dummy cycles	0
>  erase		0xd8
>  program	0x02
>  8D extension	none
>
> protocols
>  read		1S-1S-1S
>  write		1S-1S-1S
>  register	1S-1S-1S
>
> erase commands
>  20 (4.00 KiB) [1]
>  52 (32.0 KiB) [2]
>  d8 (64.0 KiB) [3]
>  c7 (16.0 MiB)
>
> sector map
>  region (in hex)   | erase mask | flags
>  ------------------+------------+----------
>  00000000-00ffffff |     [ 123] | 
>
> Changes v2:
> - Drop wrong copyright header
> - Drop name
> - Add requested info about sfpd and others
>
>  drivers/mtd/spi-nor/Makefile |  1 +
>  drivers/mtd/spi-nor/bohong.c | 18 ++++++++++++++++++
>  drivers/mtd/spi-nor/core.c   |  1 +
>  drivers/mtd/spi-nor/core.h   |  1 +
>  4 files changed, 21 insertions(+)
>  create mode 100644 drivers/mtd/spi-nor/bohong.c
>
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index 5e68468b72fc..c8849cf5124f 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -2,6 +2,7 @@
>  
>  spi-nor-objs			:= core.o sfdp.o swp.o otp.o sysfs.o
>  spi-nor-objs			+= atmel.o
> +spi-nor-objs			+= bohong.o
>  spi-nor-objs			+= eon.o
>  spi-nor-objs			+= esmt.o
>  spi-nor-objs			+= everspin.o
> diff --git a/drivers/mtd/spi-nor/bohong.c b/drivers/mtd/spi-nor/bohong.c
> new file mode 100644
> index 000000000000..8ba4f3a32040
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/bohong.c
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/mtd/spi-nor.h>
> +
> +#include "core.h"
> +
> +static const struct flash_info bohong_parts[] = {
> +	{
> +		.id = SNOR_ID(0x68, 0x40, 0x18),
> +		.size = SZ_16M,
> +		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,

. the SFDP will likely make your patch superfluous, because all of
this should be parsed from the SFDP. Did you try your flash without
any flash_info entries at all?

Regarding your question about the names, the identification should
work by the IDs only. Maybe there will be a userspace tool which
will have a flashdb instead. That is a mapping from IDs to
manufacturer and part name.

-michael

> +	},
> +};
> +
> +const struct spi_nor_manufacturer spi_nor_bohong = {
> +	.parts = bohong_parts,
> +	.nparts = ARRAY_SIZE(bohong_parts),
> +};
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 4129764fad8c..29c28ee683a1 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2037,6 +2037,7 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
>  
>  static const struct spi_nor_manufacturer *manufacturers[] = {
>  	&spi_nor_atmel,
> +	&spi_nor_bohong,
>  	&spi_nor_eon,
>  	&spi_nor_esmt,
>  	&spi_nor_everspin,
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index d36c0e072954..c293568ae827 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -601,6 +601,7 @@ struct sfdp {
>  
>  /* Manufacturer drivers. */
>  extern const struct spi_nor_manufacturer spi_nor_atmel;
> +extern const struct spi_nor_manufacturer spi_nor_bohong;
>  extern const struct spi_nor_manufacturer spi_nor_eon;
>  extern const struct spi_nor_manufacturer spi_nor_esmt;
>  extern const struct spi_nor_manufacturer spi_nor_everspin;
  
Tudor Ambarus Feb. 22, 2024, 9:19 a.m. UTC | #2
On 2/20/24 20:03, Christian Marangi wrote:
> From: David Bauer <mail@david-bauer.net>
> 
> Add MTD support for the BoHong bh25q128as SPI NOR chip.
> The chip has 16MB of total capacity, divided into a total of 256
> sectors, each 64KB sized. The chip also supports 4KB sectors.
> Additionally, it supports dual and quad read modes.
> 
> Datasheet is public and can be found at the referenced link.
> 
> Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.
> 
> Link: https://www.e-interlink.com.tw/userUpload/files/BH25Q128AS_v1_0.pdf
> Signed-off-by: David Bauer <mail@david-bauer.net>
> [ reworked to new flash_info format ]
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> Read/write/erase test are done by flashing and installing an OpenWrt
> image on the spi and by using overlayfs on it confirming correct
> read/write.
> 
> root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/partname 
> bh25q128as
> root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id 
> 684018
> root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer 
> bohong
> 
> root@OpenWrt:/# xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450000101ff00000109300000ff68000103600000ffffffffffffff
> ffffffffffffffffffffffffffffffffffffe520f1ffffffff0744eb086b
> 083b42bbeeffffffffff00ffffff44eb0c200f5210d800ffffffffffffff
> ffffffffffff003600279ef97764fcebffff
> 

Hey, Christian,

Seems that the flash defines the SFDP tables, thus it's likely you won't
need a flash entry at all, and instead rely on the generic SFDP driver
to parse the flash settings from SFDP and initialize the flash based on
that.

Have you tried testing the flash without adding a dedicated entry for
it? Just specifying the jedec,spi-nor compatible in dt will do the
trick. As you do now, but without this patch :).

Cheers,
ta
  
Christian Marangi Feb. 24, 2024, 11:18 a.m. UTC | #3
On Thu, Feb 22, 2024 at 09:19:48AM +0000, Tudor Ambarus wrote:
> 
> 
> On 2/20/24 20:03, Christian Marangi wrote:
> > From: David Bauer <mail@david-bauer.net>
> > 
> > Add MTD support for the BoHong bh25q128as SPI NOR chip.
> > The chip has 16MB of total capacity, divided into a total of 256
> > sectors, each 64KB sized. The chip also supports 4KB sectors.
> > Additionally, it supports dual and quad read modes.
> > 
> > Datasheet is public and can be found at the referenced link.
> > 
> > Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.
> > 
> > Link: https://www.e-interlink.com.tw/userUpload/files/BH25Q128AS_v1_0.pdf
> > Signed-off-by: David Bauer <mail@david-bauer.net>
> > [ reworked to new flash_info format ]
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> > Read/write/erase test are done by flashing and installing an OpenWrt
> > image on the spi and by using overlayfs on it confirming correct
> > read/write.
> > 
> > root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/partname 
> > bh25q128as
> > root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id 
> > 684018
> > root@OpenWrt:/tmp/tmp2# cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer 
> > bohong
> > 
> > root@OpenWrt:/# xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> > 53464450000101ff00000109300000ff68000103600000ffffffffffffff
> > ffffffffffffffffffffffffffffffffffffe520f1ffffffff0744eb086b
> > 083b42bbeeffffffffff00ffffff44eb0c200f5210d800ffffffffffffff
> > ffffffffffff003600279ef97764fcebffff
> > 
> 
> Hey, Christian,
> 
> Seems that the flash defines the SFDP tables, thus it's likely you won't
> need a flash entry at all, and instead rely on the generic SFDP driver
> to parse the flash settings from SFDP and initialize the flash based on
> that.
> 
> Have you tried testing the flash without adding a dedicated entry for
> it? Just specifying the jedec,spi-nor compatible in dt will do the
> trick. As you do now, but without this patch :).
>

The user just tested this and It seems there is a problem in JEDEC id?

[    0.726451] spi spi0.0: setup: ignoring unsupported mode bits a00
[    0.732850] spi-nor spi0.0: unrecognized JEDEC id bytes: 68 40 18 68 40 18
[    0.739725] spi-nor: probe of spi0.0 failed with error -2
  
Michael Walle Feb. 26, 2024, 8:51 a.m. UTC | #4
Hi,

On Sat Feb 24, 2024 at 12:18 PM CET, Christian Marangi wrote:
> The user just tested this and It seems there is a problem in JEDEC id?
>
> [    0.726451] spi spi0.0: setup: ignoring unsupported mode bits a00

What SPI controller is used in this case?

> [    0.732850] spi-nor spi0.0: unrecognized JEDEC id bytes: 68 40 18 68 40 18
> [    0.739725] spi-nor: probe of spi0.0 failed with error -2

And what kernel version is this? This should only happen if the SFDP
header is wrong, but according to your dump, it is correct.

-michael
  
Tudor Ambarus Feb. 26, 2024, 8:53 a.m. UTC | #5
On 26.02.2024 10:51, Michael Walle wrote:
> Hi,
> 
> On Sat Feb 24, 2024 at 12:18 PM CET, Christian Marangi wrote:
>> The user just tested this and It seems there is a problem in JEDEC id?
>>
>> [    0.726451] spi spi0.0: setup: ignoring unsupported mode bits a00
> 
> What SPI controller is used in this case?
> 
>> [    0.732850] spi-nor spi0.0: unrecognized JEDEC id bytes: 68 40 18 68 40 18
>> [    0.739725] spi-nor: probe of spi0.0 failed with error -2
> 
> And what kernel version is this? This should only happen if the SFDP
> header is wrong, but according to your dump, it is correct.
> 

I assume the test was done on an older kernel, where the identification
of the flash based on SFDP is not yet available.
  
Christian Marangi Feb. 27, 2024, 9:33 a.m. UTC | #6
On Mon, Feb 26, 2024 at 10:53:34AM +0200, Tudor Ambarus wrote:
> 
> 
> On 26.02.2024 10:51, Michael Walle wrote:
> > Hi,
> > 
> > On Sat Feb 24, 2024 at 12:18 PM CET, Christian Marangi wrote:
> >> The user just tested this and It seems there is a problem in JEDEC id?
> >>
> >> [    0.726451] spi spi0.0: setup: ignoring unsupported mode bits a00
> > 
> > What SPI controller is used in this case?
> > 
> >> [    0.732850] spi-nor spi0.0: unrecognized JEDEC id bytes: 68 40 18 68 40 18
> >> [    0.739725] spi-nor: probe of spi0.0 failed with error -2
> > 
> > And what kernel version is this? This should only happen if the SFDP
> > header is wrong, but according to your dump, it is correct.
> > 
> 
> I assume the test was done on an older kernel, where the identification
> of the flash based on SFDP is not yet available.

The test has been done on 5.15 and 6.1. The support for this was
introduced later? Can you point me to the commits so I can backport
them?
  
Tudor Ambarus Feb. 27, 2024, 10:08 a.m. UTC | #7
On 2/27/24 09:33, Christian Marangi wrote:
> On Mon, Feb 26, 2024 at 10:53:34AM +0200, Tudor Ambarus wrote:
>>
>>
>> On 26.02.2024 10:51, Michael Walle wrote:
>>> Hi,
>>>
>>> On Sat Feb 24, 2024 at 12:18 PM CET, Christian Marangi wrote:
>>>> The user just tested this and It seems there is a problem in JEDEC id?
>>>>
>>>> [    0.726451] spi spi0.0: setup: ignoring unsupported mode bits a00
>>>
>>> What SPI controller is used in this case?
>>>
>>>> [    0.732850] spi-nor spi0.0: unrecognized JEDEC id bytes: 68 40 18 68 40 18
>>>> [    0.739725] spi-nor: probe of spi0.0 failed with error -2
>>>
>>> And what kernel version is this? This should only happen if the SFDP
>>> header is wrong, but according to your dump, it is correct.
>>>
>>
>> I assume the test was done on an older kernel, where the identification
>> of the flash based on SFDP is not yet available.
> 
> The test has been done on 5.15 and 6.1. The support for this was
> introduced later? Can you point me to the commits so I can backport
> them?
> 

Use git blame.

773bbe104497 ("mtd: spi-nor: add generic flash driver")
  

Patch

diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 5e68468b72fc..c8849cf5124f 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -2,6 +2,7 @@ 
 
 spi-nor-objs			:= core.o sfdp.o swp.o otp.o sysfs.o
 spi-nor-objs			+= atmel.o
+spi-nor-objs			+= bohong.o
 spi-nor-objs			+= eon.o
 spi-nor-objs			+= esmt.o
 spi-nor-objs			+= everspin.o
diff --git a/drivers/mtd/spi-nor/bohong.c b/drivers/mtd/spi-nor/bohong.c
new file mode 100644
index 000000000000..8ba4f3a32040
--- /dev/null
+++ b/drivers/mtd/spi-nor/bohong.c
@@ -0,0 +1,18 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info bohong_parts[] = {
+	{
+		.id = SNOR_ID(0x68, 0x40, 0x18),
+		.size = SZ_16M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	},
+};
+
+const struct spi_nor_manufacturer spi_nor_bohong = {
+	.parts = bohong_parts,
+	.nparts = ARRAY_SIZE(bohong_parts),
+};
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 4129764fad8c..29c28ee683a1 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2037,6 +2037,7 @@  int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
 
 static const struct spi_nor_manufacturer *manufacturers[] = {
 	&spi_nor_atmel,
+	&spi_nor_bohong,
 	&spi_nor_eon,
 	&spi_nor_esmt,
 	&spi_nor_everspin,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index d36c0e072954..c293568ae827 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -601,6 +601,7 @@  struct sfdp {
 
 /* Manufacturer drivers. */
 extern const struct spi_nor_manufacturer spi_nor_atmel;
+extern const struct spi_nor_manufacturer spi_nor_bohong;
 extern const struct spi_nor_manufacturer spi_nor_eon;
 extern const struct spi_nor_manufacturer spi_nor_esmt;
 extern const struct spi_nor_manufacturer spi_nor_everspin;