diff mbox series

[v3,1/4] dt-bindings: usb: typec-tcpci: add tcpci fallback binding

Message ID 20240222210903.208901-2-m.felsch@pengutronix.de
State New
Headers
Series USB-C TCPM Orientation Support |

Commit Message

Marco Felsch Feb. 22, 2024, 9:09 p.m. UTC 
  The NXP PTN5110 [1] is an TCPCI [2] compatible chip, so add the fallback
binding.

[1] https://www.nxp.com/docs/en/data-sheet/PTN5110.pdf
[2] https://www.usb.org/sites/default/files/documents/usb-port_controller_specification_rev2.0_v1.0_0.pdf

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
v3:
- use items
- adapt example

v2:
- rephrase commit message

 Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Feb. 26, 2024, 8:56 a.m. UTC | #1 
On 22/02/2024 22:09, Marco Felsch wrote:
> The NXP PTN5110 [1] is an TCPCI [2] compatible chip, so add the fallback
> binding.
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
index eaedb4cc6b6c..65a8632b4d9e 100644
--- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -11,7 +11,9 @@  maintainers:
 
 properties:
   compatible:
-    const: nxp,ptn5110
+    items:
+      - const: nxp,ptn5110
+      - const: tcpci
 
   reg:
     maxItems: 1
@@ -41,7 +43,7 @@  examples:
         #size-cells = <0>;
 
         tcpci@50 {
-            compatible = "nxp,ptn5110";
+            compatible = "nxp,ptn5110", "tcpci";
             reg = <0x50>;
             interrupt-parent = <&gpio3>;
             interrupts = <3 IRQ_TYPE_LEVEL_LOW>;