[v2,15/20] media: i2c: ov4689: Move pixel array size out of struct ov4689_mode

Message ID 20231218174042.794012-16-mike.rudenko@gmail.com
State New
Headers
Series Omnivision OV4689 refactoring and improvements |

Commit Message

Mikhail Rudenko Dec. 18, 2023, 5:40 p.m. UTC
  Pixel array dimensions and default crop size do not belong to the
ov4689_mode structure, since they are mode independent. Make them
defines instead.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
---
 drivers/media/i2c/ov4689.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)
  

Comments

Laurent Pinchart Feb. 23, 2024, 11:33 a.m. UTC | #1
Hi Mikhail,

Thank you for the patch.

On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote:
> Pixel array dimensions and default crop size do not belong to the
> ov4689_mode structure, since they are mode independent. Make them
> defines instead.
> 
> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
> ---
>  drivers/media/i2c/ov4689.c | 29 +++++++++++++----------------
>  1 file changed, 13 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
> index b43fb1d7b15f..475508559e3e 100644
> --- a/drivers/media/i2c/ov4689.c
> +++ b/drivers/media/i2c/ov4689.c
> @@ -70,6 +70,11 @@
>  #define OV4689_LANES			4
>  #define OV4689_XVCLK_FREQ		24000000
>  
> +#define OV4689_PIXEL_ARRAY_WIDTH	2720
> +#define OV4689_PIXEL_ARRAY_HEIGHT	1536
> +#define OV4689_DUMMY_ROWS		8
> +#define OV4689_DUMMY_COLUMNS		16

Adding a comment here to indicate that there are dummy columns in each
side would be useful:

#define OV4689_DUMMY_ROWS		8	/* 8 dummy rows on each side */
#define OV4689_DUMMY_COLUMNS		16	/* 16 dummy columns on each side */

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
>  static const char *const ov4689_supply_names[] = {
>  	"avdd", /* Analog power */
>  	"dovdd", /* Digital I/O power */
> @@ -90,10 +95,6 @@ struct ov4689_mode {
>  	u32 vts_def;
>  	u32 exp_def;
>  	u32 pixel_rate;
> -	u32 sensor_width;
> -	u32 sensor_height;
> -	u32 crop_top;
> -	u32 crop_left;
>  	const struct cci_reg_sequence *reg_list;
>  	unsigned int num_regs;
>  };
> @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = {
>  		.id = OV4689_MODE_2688_1520,
>  		.width = 2688,
>  		.height = 1520,
> -		.sensor_width = 2720,
> -		.sensor_height = 1536,
> -		.crop_top = 8,
> -		.crop_left = 16,
>  		.exp_def = 1536,
>  		.hts_def = 10296,
>  		.hts_min = 3432,
> @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
>  				struct v4l2_subdev_state *state,
>  				struct v4l2_subdev_selection *sel)
>  {
> -	const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode;
> -
>  	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>  		return -EINVAL;
>  
> @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
>  	case V4L2_SEL_TGT_CROP_BOUNDS:
>  		sel->r.top = 0;
>  		sel->r.left = 0;
> -		sel->r.width = mode->sensor_width;
> -		sel->r.height = mode->sensor_height;
> +		sel->r.width = OV4689_PIXEL_ARRAY_WIDTH;
> +		sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT;
>  		return 0;
>  	case V4L2_SEL_TGT_CROP:
>  	case V4L2_SEL_TGT_CROP_DEFAULT:
> -		sel->r.top = mode->crop_top;
> -		sel->r.left = mode->crop_left;
> -		sel->r.width = mode->width;
> -		sel->r.height = mode->height;
> +		sel->r.top = OV4689_DUMMY_ROWS;
> +		sel->r.left = OV4689_DUMMY_COLUMNS;
> +		sel->r.width =
> +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS;
> +		sel->r.height =
> +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS;
>  		return 0;
>  	}
>
  
Laurent Pinchart Feb. 23, 2024, 11:36 a.m. UTC | #2
On Fri, Feb 23, 2024 at 01:33:01PM +0200, Laurent Pinchart wrote:
> Hi Mikhail,
> 
> Thank you for the patch.
> 
> On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote:
> > Pixel array dimensions and default crop size do not belong to the
> > ov4689_mode structure, since they are mode independent. Make them
> > defines instead.
> > 
> > Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
> > ---
> >  drivers/media/i2c/ov4689.c | 29 +++++++++++++----------------
> >  1 file changed, 13 insertions(+), 16 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
> > index b43fb1d7b15f..475508559e3e 100644
> > --- a/drivers/media/i2c/ov4689.c
> > +++ b/drivers/media/i2c/ov4689.c
> > @@ -70,6 +70,11 @@
> >  #define OV4689_LANES			4
> >  #define OV4689_XVCLK_FREQ		24000000
> >  
> > +#define OV4689_PIXEL_ARRAY_WIDTH	2720
> > +#define OV4689_PIXEL_ARRAY_HEIGHT	1536
> > +#define OV4689_DUMMY_ROWS		8
> > +#define OV4689_DUMMY_COLUMNS		16
> 
> Adding a comment here to indicate that there are dummy columns in each
> side would be useful:
> 
> #define OV4689_DUMMY_ROWS		8	/* 8 dummy rows on each side */
> #define OV4689_DUMMY_COLUMNS		16	/* 16 dummy columns on each side */
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> > +
> >  static const char *const ov4689_supply_names[] = {
> >  	"avdd", /* Analog power */
> >  	"dovdd", /* Digital I/O power */
> > @@ -90,10 +95,6 @@ struct ov4689_mode {
> >  	u32 vts_def;
> >  	u32 exp_def;
> >  	u32 pixel_rate;
> > -	u32 sensor_width;
> > -	u32 sensor_height;
> > -	u32 crop_top;
> > -	u32 crop_left;
> >  	const struct cci_reg_sequence *reg_list;
> >  	unsigned int num_regs;
> >  };
> > @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = {
> >  		.id = OV4689_MODE_2688_1520,
> >  		.width = 2688,
> >  		.height = 1520,
> > -		.sensor_width = 2720,
> > -		.sensor_height = 1536,
> > -		.crop_top = 8,
> > -		.crop_left = 16,
> >  		.exp_def = 1536,
> >  		.hts_def = 10296,
> >  		.hts_min = 3432,
> > @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
> >  				struct v4l2_subdev_state *state,
> >  				struct v4l2_subdev_selection *sel)
> >  {
> > -	const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode;
> > -
> >  	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> >  		return -EINVAL;
> >  
> > @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
> >  	case V4L2_SEL_TGT_CROP_BOUNDS:
> >  		sel->r.top = 0;
> >  		sel->r.left = 0;
> > -		sel->r.width = mode->sensor_width;
> > -		sel->r.height = mode->sensor_height;
> > +		sel->r.width = OV4689_PIXEL_ARRAY_WIDTH;
> > +		sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT;
> >  		return 0;
> >  	case V4L2_SEL_TGT_CROP:
> >  	case V4L2_SEL_TGT_CROP_DEFAULT:
> > -		sel->r.top = mode->crop_top;
> > -		sel->r.left = mode->crop_left;
> > -		sel->r.width = mode->width;
> > -		sel->r.height = mode->height;
> > +		sel->r.top = OV4689_DUMMY_ROWS;
> > +		sel->r.left = OV4689_DUMMY_COLUMNS;
> > +		sel->r.width =
> > +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS;
> > +		sel->r.height =
> > +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS;

I spoke too fast: this should be OV4689_PIXEL_ARRAY_HEIGHT, not
OV4689_PIXEL_ARRAY_WIDTH.

> >  		return 0;
> >  	}
> >
  
Mikhail Rudenko Feb. 23, 2024, 4:29 p.m. UTC | #3
Hi Laurent,

and thanks for the review!

On 2024-02-23 at 13:33 +02, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote:

> Hi Mikhail,
>
> Thank you for the patch.
>
> On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote:
>> Pixel array dimensions and default crop size do not belong to the
>> ov4689_mode structure, since they are mode independent. Make them
>> defines instead.
>>
>> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
>> ---
>>  drivers/media/i2c/ov4689.c | 29 +++++++++++++----------------
>>  1 file changed, 13 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
>> index b43fb1d7b15f..475508559e3e 100644
>> --- a/drivers/media/i2c/ov4689.c
>> +++ b/drivers/media/i2c/ov4689.c
>> @@ -70,6 +70,11 @@
>>  #define OV4689_LANES			4
>>  #define OV4689_XVCLK_FREQ		24000000
>>
>> +#define OV4689_PIXEL_ARRAY_WIDTH	2720
>> +#define OV4689_PIXEL_ARRAY_HEIGHT	1536
>> +#define OV4689_DUMMY_ROWS		8
>> +#define OV4689_DUMMY_COLUMNS		16
>
> Adding a comment here to indicate that there are dummy columns in each
> side would be useful:
>
> #define OV4689_DUMMY_ROWS		8	/* 8 dummy rows on each side */
> #define OV4689_DUMMY_COLUMNS		16	/* 16 dummy columns on each side */

Will add the comments in v3.

>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
>> +
>>  static const char *const ov4689_supply_names[] = {
>>  	"avdd", /* Analog power */
>>  	"dovdd", /* Digital I/O power */
>> @@ -90,10 +95,6 @@ struct ov4689_mode {
>>  	u32 vts_def;
>>  	u32 exp_def;
>>  	u32 pixel_rate;
>> -	u32 sensor_width;
>> -	u32 sensor_height;
>> -	u32 crop_top;
>> -	u32 crop_left;
>>  	const struct cci_reg_sequence *reg_list;
>>  	unsigned int num_regs;
>>  };
>> @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = {
>>  		.id = OV4689_MODE_2688_1520,
>>  		.width = 2688,
>>  		.height = 1520,
>> -		.sensor_width = 2720,
>> -		.sensor_height = 1536,
>> -		.crop_top = 8,
>> -		.crop_left = 16,
>>  		.exp_def = 1536,
>>  		.hts_def = 10296,
>>  		.hts_min = 3432,
>> @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
>>  				struct v4l2_subdev_state *state,
>>  				struct v4l2_subdev_selection *sel)
>>  {
>> -	const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode;
>> -
>>  	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>>  		return -EINVAL;
>>
>> @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
>>  	case V4L2_SEL_TGT_CROP_BOUNDS:
>>  		sel->r.top = 0;
>>  		sel->r.left = 0;
>> -		sel->r.width = mode->sensor_width;
>> -		sel->r.height = mode->sensor_height;
>> +		sel->r.width = OV4689_PIXEL_ARRAY_WIDTH;
>> +		sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT;
>>  		return 0;
>>  	case V4L2_SEL_TGT_CROP:
>>  	case V4L2_SEL_TGT_CROP_DEFAULT:
>> -		sel->r.top = mode->crop_top;
>> -		sel->r.left = mode->crop_left;
>> -		sel->r.width = mode->width;
>> -		sel->r.height = mode->height;
>> +		sel->r.top = OV4689_DUMMY_ROWS;
>> +		sel->r.left = OV4689_DUMMY_COLUMNS;
>> +		sel->r.width =
>> +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS;
>> +		sel->r.height =
>> +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS;
>>  		return 0;
>>  	}
>>


--
Best regards,
Mikhail Rudenko
  
Mikhail Rudenko Feb. 23, 2024, 4:31 p.m. UTC | #4
Hi Laurent,

and thanks for the review!

On 2024-02-23 at 13:36 +02, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote:

> On Fri, Feb 23, 2024 at 01:33:01PM +0200, Laurent Pinchart wrote:
>> Hi Mikhail,
>>
>> Thank you for the patch.
>>
>> On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote:
>> > Pixel array dimensions and default crop size do not belong to the
>> > ov4689_mode structure, since they are mode independent. Make them
>> > defines instead.
>> >
>> > Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
>> > ---
>> >  drivers/media/i2c/ov4689.c | 29 +++++++++++++----------------
>> >  1 file changed, 13 insertions(+), 16 deletions(-)
>> >
>> > diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
>> > index b43fb1d7b15f..475508559e3e 100644
>> > --- a/drivers/media/i2c/ov4689.c
>> > +++ b/drivers/media/i2c/ov4689.c
>> > @@ -70,6 +70,11 @@
>> >  #define OV4689_LANES			4
>> >  #define OV4689_XVCLK_FREQ		24000000
>> >
>> > +#define OV4689_PIXEL_ARRAY_WIDTH	2720
>> > +#define OV4689_PIXEL_ARRAY_HEIGHT	1536
>> > +#define OV4689_DUMMY_ROWS		8
>> > +#define OV4689_DUMMY_COLUMNS		16
>>
>> Adding a comment here to indicate that there are dummy columns in each
>> side would be useful:
>>
>> #define OV4689_DUMMY_ROWS		8	/* 8 dummy rows on each side */
>> #define OV4689_DUMMY_COLUMNS		16	/* 16 dummy columns on each side */
>>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>>
>> > +
>> >  static const char *const ov4689_supply_names[] = {
>> >  	"avdd", /* Analog power */
>> >  	"dovdd", /* Digital I/O power */
>> > @@ -90,10 +95,6 @@ struct ov4689_mode {
>> >  	u32 vts_def;
>> >  	u32 exp_def;
>> >  	u32 pixel_rate;
>> > -	u32 sensor_width;
>> > -	u32 sensor_height;
>> > -	u32 crop_top;
>> > -	u32 crop_left;
>> >  	const struct cci_reg_sequence *reg_list;
>> >  	unsigned int num_regs;
>> >  };
>> > @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = {
>> >  		.id = OV4689_MODE_2688_1520,
>> >  		.width = 2688,
>> >  		.height = 1520,
>> > -		.sensor_width = 2720,
>> > -		.sensor_height = 1536,
>> > -		.crop_top = 8,
>> > -		.crop_left = 16,
>> >  		.exp_def = 1536,
>> >  		.hts_def = 10296,
>> >  		.hts_min = 3432,
>> > @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
>> >  				struct v4l2_subdev_state *state,
>> >  				struct v4l2_subdev_selection *sel)
>> >  {
>> > -	const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode;
>> > -
>> >  	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>> >  		return -EINVAL;
>> >
>> > @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd,
>> >  	case V4L2_SEL_TGT_CROP_BOUNDS:
>> >  		sel->r.top = 0;
>> >  		sel->r.left = 0;
>> > -		sel->r.width = mode->sensor_width;
>> > -		sel->r.height = mode->sensor_height;
>> > +		sel->r.width = OV4689_PIXEL_ARRAY_WIDTH;
>> > +		sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT;
>> >  		return 0;
>> >  	case V4L2_SEL_TGT_CROP:
>> >  	case V4L2_SEL_TGT_CROP_DEFAULT:
>> > -		sel->r.top = mode->crop_top;
>> > -		sel->r.left = mode->crop_left;
>> > -		sel->r.width = mode->width;
>> > -		sel->r.height = mode->height;
>> > +		sel->r.top = OV4689_DUMMY_ROWS;
>> > +		sel->r.left = OV4689_DUMMY_COLUMNS;
>> > +		sel->r.width =
>> > +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS;
>> > +		sel->r.height =
>> > +			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS;
>
> I spoke too fast: this should be OV4689_PIXEL_ARRAY_HEIGHT, not
> OV4689_PIXEL_ARRAY_WIDTH.

Good catch, will fix in v3.

>> >  		return 0;
>> >  	}
>> >


--
Best regards,
Mikhail Rudenko
  

Patch

diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
index b43fb1d7b15f..475508559e3e 100644
--- a/drivers/media/i2c/ov4689.c
+++ b/drivers/media/i2c/ov4689.c
@@ -70,6 +70,11 @@ 
 #define OV4689_LANES			4
 #define OV4689_XVCLK_FREQ		24000000
 
+#define OV4689_PIXEL_ARRAY_WIDTH	2720
+#define OV4689_PIXEL_ARRAY_HEIGHT	1536
+#define OV4689_DUMMY_ROWS		8
+#define OV4689_DUMMY_COLUMNS		16
+
 static const char *const ov4689_supply_names[] = {
 	"avdd", /* Analog power */
 	"dovdd", /* Digital I/O power */
@@ -90,10 +95,6 @@  struct ov4689_mode {
 	u32 vts_def;
 	u32 exp_def;
 	u32 pixel_rate;
-	u32 sensor_width;
-	u32 sensor_height;
-	u32 crop_top;
-	u32 crop_left;
 	const struct cci_reg_sequence *reg_list;
 	unsigned int num_regs;
 };
@@ -254,10 +255,6 @@  static const struct ov4689_mode supported_modes[] = {
 		.id = OV4689_MODE_2688_1520,
 		.width = 2688,
 		.height = 1520,
-		.sensor_width = 2720,
-		.sensor_height = 1536,
-		.crop_top = 8,
-		.crop_left = 16,
 		.exp_def = 1536,
 		.hts_def = 10296,
 		.hts_min = 3432,
@@ -385,8 +382,6 @@  static int ov4689_get_selection(struct v4l2_subdev *sd,
 				struct v4l2_subdev_state *state,
 				struct v4l2_subdev_selection *sel)
 {
-	const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode;
-
 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
 		return -EINVAL;
 
@@ -394,15 +389,17 @@  static int ov4689_get_selection(struct v4l2_subdev *sd,
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 		sel->r.top = 0;
 		sel->r.left = 0;
-		sel->r.width = mode->sensor_width;
-		sel->r.height = mode->sensor_height;
+		sel->r.width = OV4689_PIXEL_ARRAY_WIDTH;
+		sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT;
 		return 0;
 	case V4L2_SEL_TGT_CROP:
 	case V4L2_SEL_TGT_CROP_DEFAULT:
-		sel->r.top = mode->crop_top;
-		sel->r.left = mode->crop_left;
-		sel->r.width = mode->width;
-		sel->r.height = mode->height;
+		sel->r.top = OV4689_DUMMY_ROWS;
+		sel->r.left = OV4689_DUMMY_COLUMNS;
+		sel->r.width =
+			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS;
+		sel->r.height =
+			OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS;
 		return 0;
 	}