diff mbox series

[net-next,v5] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

Message ID 20240220050735.29507-1-quic_snehshah@quicinc.com
State New
Headers
Series [net-next,v5] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII |

Commit Message

Sneh Shah Feb. 20, 2024, 5:07 a.m. UTC 
  Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.
Changing serdes phy speed involves multiple register writes for
serdes block. To avoid redundant write operations only update serdes
phy when new speed is different.
For 2500 speed MAC PCS autoneg needs to disabled. Added changes to
disable MAC PCS autoneg if ANE parameter is not set.

Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
---
v5 changelog:
- Updated commit message with more details on MAC PCS autoneg disable
v4 changelog:
- Made cosmetic changes
v3 changelog:
- updated commit message
---
v2 changelog:
- updated stmmac_pcs_ane to support autoneg disable
- Update serdes speed to 1000 for 100M and 10M also---
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 26 +++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_pcs.h  |  2 ++
 2 files changed, 28 insertions(+)

Comments

Abhishek Chauhan Feb. 20, 2024, 9:22 p.m. UTC | #1 
On 2/19/2024 9:07 PM, Sneh Shah wrote:
> Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
> mode for 1G/100M/10M speed.
> Added changes to configure serdes phy and mac based on link speed.
> Changing serdes phy speed involves multiple register writes for
> serdes block. To avoid redundant write operations only update serdes
> phy when new speed is different.
> For 2500 speed MAC PCS autoneg needs to disabled. Added changes to
> disable MAC PCS autoneg if ANE parameter is not set.
> 
> Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Tested-by: Abhishek Chauhan <quic_abchauha@quicinc.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
> ---
> v5 changelog:
> - Updated commit message with more details on MAC PCS autoneg disable
> v4 changelog:
> - Made cosmetic changes
> v3 changelog:
> - updated commit message
> ---
> v2 changelog:
> - updated stmmac_pcs_ane to support autoneg disable
> - Update serdes speed to 1000 for 100M and 10M also---
> ---
>  .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 26 +++++++++++++++++++
>  .../net/ethernet/stmicro/stmmac/stmmac_pcs.h  |  2 ++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index 31631e3f89d0..6bbdbb7bef44 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -106,6 +106,7 @@ struct qcom_ethqos {
>  	struct clk *link_clk;
>  	struct phy *serdes_phy;
>  	unsigned int speed;
> +	int serdes_speed;
>  	phy_interface_t phy_mode;
>  
>  	const struct ethqos_emac_por *por;
> @@ -606,19 +607,39 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
>   */
>  static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
>  {
> +	struct net_device *dev = platform_get_drvdata(ethqos->pdev);
> +	struct stmmac_priv *priv = netdev_priv(dev);
>  	int val;
>  
>  	val = readl(ethqos->mac_base + MAC_CTRL_REG);
>  
>  	switch (ethqos->speed) {
> +	case SPEED_2500:
> +		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
> +		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
> +			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
> +			      RGMII_IO_MACRO_CONFIG2);
> +		if (ethqos->serdes_speed != SPEED_2500)
> +			phy_set_speed(ethqos->serdes_phy, SPEED_2500);
> +		ethqos->serdes_speed = SPEED_2500;
> +		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 0, 0, 0);
> +		break;
>  	case SPEED_1000:
>  		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
>  		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
>  			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
>  			      RGMII_IO_MACRO_CONFIG2);
> +		if (ethqos->serdes_speed != SPEED_1000)
> +			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
> +		ethqos->serdes_speed = SPEED_1000;
> +		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
>  		break;
>  	case SPEED_100:
>  		val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
> +		if (ethqos->serdes_speed != SPEED_1000)
> +			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
> +		ethqos->serdes_speed = SPEED_1000;
> +		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
>  		break;
>  	case SPEED_10:
>  		val |= ETHQOS_MAC_CTRL_PORT_SEL;
> @@ -627,6 +648,10 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
>  			      FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR,
>  					 SGMII_10M_RX_CLK_DVDR),
>  			      RGMII_IO_MACRO_CONFIG);
> +		if (ethqos->serdes_speed != SPEED_1000)
> +			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
> +		ethqos->serdes_speed = SPEED_1000;
> +		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
>  		break;
>  	}
>  
> @@ -799,6 +824,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
>  				     "Failed to get serdes phy\n");
>  
>  	ethqos->speed = SPEED_1000;
> +	ethqos->serdes_speed = SPEED_1000;
>  	ethqos_update_link_clk(ethqos, SPEED_1000);
>  	ethqos_set_func_clk_en(ethqos);
>  
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
> index aefc121464b5..13a30e6df4c1 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
> @@ -110,6 +110,8 @@ static inline void dwmac_ctrl_ane(void __iomem *ioaddr, u32 reg, bool ane,
>  	/* Enable and restart the Auto-Negotiation */
>  	if (ane)
>  		value |= GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_RAN;
> +	else
> +		value &= ~GMAC_AN_CTRL_ANE;
>  
>  	/* In case of MAC-2-MAC connection, block is configured to operate
>  	 * according to MAC conf register.
patchwork-bot+netdevbpf@kernel.org Feb. 23, 2024, 11 a.m. UTC | #2 
Hello:

This patch was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Tue, 20 Feb 2024 10:37:35 +0530 you wrote:
> Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
> mode for 1G/100M/10M speed.
> Added changes to configure serdes phy and mac based on link speed.
> Changing serdes phy speed involves multiple register writes for
> serdes block. To avoid redundant write operations only update serdes
> phy when new speed is different.
> For 2500 speed MAC PCS autoneg needs to disabled. Added changes to
> disable MAC PCS autoneg if ANE parameter is not set.
> 
> [...]

Here is the summary with links:
  - [net-next,v5] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII
    https://git.kernel.org/netdev/net-next/c/a818bd12538c

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 31631e3f89d0..6bbdbb7bef44 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -106,6 +106,7 @@  struct qcom_ethqos {
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	unsigned int speed;
+	int serdes_speed;
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *por;
@@ -606,19 +607,39 @@  static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
  */
 static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 {
+	struct net_device *dev = platform_get_drvdata(ethqos->pdev);
+	struct stmmac_priv *priv = netdev_priv(dev);
 	int val;
 
 	val = readl(ethqos->mac_base + MAC_CTRL_REG);
 
 	switch (ethqos->speed) {
+	case SPEED_2500:
+		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
+		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+			      RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->serdes_speed != SPEED_2500)
+			phy_set_speed(ethqos->serdes_phy, SPEED_2500);
+		ethqos->serdes_speed = SPEED_2500;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 0, 0, 0);
+		break;
 	case SPEED_1000:
 		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
+		ethqos->serdes_speed = SPEED_1000;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	case SPEED_100:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
+		ethqos->serdes_speed = SPEED_1000;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	case SPEED_10:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL;
@@ -627,6 +648,10 @@  static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 			      FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR,
 					 SGMII_10M_RX_CLK_DVDR),
 			      RGMII_IO_MACRO_CONFIG);
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+		ethqos->serdes_speed = SPEED_1000;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	}
 
@@ -799,6 +824,7 @@  static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "Failed to get serdes phy\n");
 
 	ethqos->speed = SPEED_1000;
+	ethqos->serdes_speed = SPEED_1000;
 	ethqos_update_link_clk(ethqos, SPEED_1000);
 	ethqos_set_func_clk_en(ethqos);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index aefc121464b5..13a30e6df4c1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -110,6 +110,8 @@  static inline void dwmac_ctrl_ane(void __iomem *ioaddr, u32 reg, bool ane,
 	/* Enable and restart the Auto-Negotiation */
 	if (ane)
 		value |= GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_RAN;
+	else
+		value &= ~GMAC_AN_CTRL_ANE;
 
 	/* In case of MAC-2-MAC connection, block is configured to operate
 	 * according to MAC conf register.