diff mbox series

[v2] RDMA/device: Fix a race between mad_client and cm_client init

Message ID 20240203035313.98991-1-lishifeng@sangfor.com.cn
State New
Headers
Series [v2] RDMA/device: Fix a race between mad_client and cm_client init |

Commit Message

Shifeng Li Feb. 3, 2024, 3:53 a.m. UTC 
  The mad_client will be initialized in enable_device_and_get(), while the
devices_rwsem will be downgraded to a read semaphore. There is a window
that leads to the failed initialization for cm_client, since it can not
get matched mad port from ib_mad_port_list, and the matched mad port will
be added to the list after that.

    mad_client    |                       cm_client
------------------|--------------------------------------------------------
ib_register_device|
enable_device_and_get
down_write(&devices_rwsem)
xa_set_mark(&devices, DEVICE_REGISTERED)
downgrade_write(&devices_rwsem)
                  |
                  |ib_cm_init
                  |ib_register_client(&cm_client)
                  |down_read(&devices_rwsem)
                  |xa_for_each_marked (&devices, DEVICE_REGISTERED)
                  |add_client_context
                  |cm_add_one
                  |ib_register_mad_agent
                  |ib_get_mad_port
                  |__ib_get_mad_port
                  |list_for_each_entry(entry, &ib_mad_port_list, port_list)
                  |return NULL
                  |up_read(&devices_rwsem)
                  |
add_client_context|
ib_mad_init_device|
ib_mad_port_open  |
list_add_tail(&port_priv->port_list, &ib_mad_port_list)
up_read(&devices_rwsem)
                  |

Fix it by using down_write(&devices_rwsem) in ib_register_client().

Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Ding Hui <dinghui@sangfor.com.cn>
Cc: Shifeng Li <lishifeng1992@126.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
---
 drivers/infiniband/core/device.c | 33 +++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

---
v1->v2: Use down_write(&devices_rwsem) in ib_register_client().

Comments

Jason Gunthorpe Feb. 21, 2024, 5:17 p.m. UTC | #1 
On Fri, Feb 02, 2024 at 07:53:13PM -0800, Shifeng Li wrote:
> The mad_client will be initialized in enable_device_and_get(), while the
> devices_rwsem will be downgraded to a read semaphore. There is a window
> that leads to the failed initialization for cm_client, since it can not
> get matched mad port from ib_mad_port_list, and the matched mad port will
> be added to the list after that.
> 
>     mad_client    |                       cm_client
> ------------------|--------------------------------------------------------
> ib_register_device|
> enable_device_and_get
> down_write(&devices_rwsem)
> xa_set_mark(&devices, DEVICE_REGISTERED)
> downgrade_write(&devices_rwsem)
>                   |
>                   |ib_cm_init
>                   |ib_register_client(&cm_client)
>                   |down_read(&devices_rwsem)
>                   |xa_for_each_marked (&devices, DEVICE_REGISTERED)
>                   |add_client_context
>                   |cm_add_one
>                   |ib_register_mad_agent
>                   |ib_get_mad_port
>                   |__ib_get_mad_port
>                   |list_for_each_entry(entry, &ib_mad_port_list, port_list)
>                   |return NULL
>                   |up_read(&devices_rwsem)
>                   |
> add_client_context|
> ib_mad_init_device|
> ib_mad_port_open  |
> list_add_tail(&port_priv->port_list, &ib_mad_port_list)
> up_read(&devices_rwsem)
>                   |
> 
> Fix it by using down_write(&devices_rwsem) in ib_register_client().
> 
> Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
> Cc: Ding Hui <dinghui@sangfor.com.cn>
> Cc: Shifeng Li <lishifeng1992@126.com>
> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
> ---
>  drivers/infiniband/core/device.c | 33 +++++++++++++++++---------------
>  1 file changed, 18 insertions(+), 15 deletions(-)

Applied to for-next, thanks

Jason
diff mbox series

Patch

diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 67bcea7a153c..ff08a665524a 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1730,7 +1730,7 @@  static int assign_client_id(struct ib_client *client)
 {
 	int ret;
 
-	down_write(&clients_rwsem);
+	lockdep_assert_held(&clients_rwsem);
 	/*
 	 * The add/remove callbacks must be called in FIFO/LIFO order. To
 	 * achieve this we assign client_ids so they are sorted in
@@ -1739,14 +1739,11 @@  static int assign_client_id(struct ib_client *client)
 	client->client_id = highest_client_id;
 	ret = xa_insert(&clients, client->client_id, client, GFP_KERNEL);
 	if (ret)
-		goto out;
+		return ret;
 
 	highest_client_id++;
 	xa_set_mark(&clients, client->client_id, CLIENT_REGISTERED);
-
-out:
-	up_write(&clients_rwsem);
-	return ret;
+	return 0;
 }
 
 static void remove_client_id(struct ib_client *client)
@@ -1776,25 +1773,31 @@  int ib_register_client(struct ib_client *client)
 {
 	struct ib_device *device;
 	unsigned long index;
+	bool need_unreg = false;
 	int ret;
 
 	refcount_set(&client->uses, 1);
 	init_completion(&client->uses_zero);
+
+	down_write(&devices_rwsem);
+	down_write(&clients_rwsem);
 	ret = assign_client_id(client);
 	if (ret)
-		return ret;
+		goto out;
 
-	down_read(&devices_rwsem);
+	need_unreg = true;
 	xa_for_each_marked (&devices, index, device, DEVICE_REGISTERED) {
 		ret = add_client_context(device, client);
-		if (ret) {
-			up_read(&devices_rwsem);
-			ib_unregister_client(client);
-			return ret;
-		}
+		if (ret)
+			goto out;
 	}
-	up_read(&devices_rwsem);
-	return 0;
+	ret = 0;
+out:
+	up_write(&clients_rwsem);
+	up_write(&devices_rwsem);
+	if (need_unreg && ret)
+		ib_unregister_client(client);
+	return ret;
 }
 EXPORT_SYMBOL(ib_register_client);