[v4,3/3] phy: mediatek: tphy: add debugfs files
Commit Message
These debugfs files are mainly used to make eye diagram test easier,
especially helpful to do HQA test for a new IC without efuse enabled.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4: fix build warning of sometimes uninitialized variable
v3: fix typo of "debugfs" suggested by AngeloGioacchino
v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
---
drivers/phy/mediatek/Kconfig | 5 +
drivers/phy/mediatek/phy-mtk-tphy.c | 405 +++++++++++++++++++++++++++-
2 files changed, 409 insertions(+), 1 deletion(-)
Comments
On 10-11-22, 21:27, Chunfeng Yun wrote:
> These debugfs files are mainly used to make eye diagram test easier,
> especially helpful to do HQA test for a new IC without efuse enabled.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v4: fix build warning of sometimes uninitialized variable
>
> v3: fix typo of "debugfs" suggested by AngeloGioacchino
>
> v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
> ---
> drivers/phy/mediatek/Kconfig | 5 +
> drivers/phy/mediatek/phy-mtk-tphy.c | 405 +++++++++++++++++++++++++++-
> 2 files changed, 409 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
> index 3125ecb5d119..e9fdfe9f519f 100644
> --- a/drivers/phy/mediatek/Kconfig
> +++ b/drivers/phy/mediatek/Kconfig
> @@ -27,6 +27,11 @@ config PHY_MTK_TPHY
> multi-ports is first version, otherwise is second version,
> so you can easily distinguish them by banks layout.
>
> +config PHY_MTK_TPHY_DEBUGFS
> + bool "Add T-PHY Debugfs Files"
> + help
> + Say Y here to add debugfs files mainly for T-PHY HQA test.
Why do we need a config option for this, is debugfs config option not
sufficient?
> +
> config PHY_MTK_UFS
> tristate "MediaTek UFS M-PHY driver"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> index e906a82791bd..f220a9a409bf 100644
> --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> @@ -7,6 +7,7 @@
>
> #include <dt-bindings/phy/phy.h>
> #include <linux/clk.h>
> +#include <linux/debugfs.h>
> #include <linux/delay.h>
> #include <linux/iopoll.h>
> #include <linux/mfd/syscon.h>
> @@ -264,6 +265,8 @@
>
> #define TPHY_CLKS_CNT 2
>
> +#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
> +
> enum mtk_phy_version {
> MTK_PHY_V1 = 1,
> MTK_PHY_V2,
> @@ -310,6 +313,7 @@ struct mtk_phy_instance {
> struct clk_bulk_data clks[TPHY_CLKS_CNT];
> u32 index;
> u32 type;
> + struct dentry *dbgfs;
> struct regmap *type_sw;
> u32 type_sw_reg;
> u32 type_sw_index;
> @@ -332,10 +336,391 @@ struct mtk_tphy {
> const struct mtk_phy_pdata *pdata;
> struct mtk_phy_instance **phys;
> int nphys;
> + struct dentry *dbgfs_root;
> int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
> int src_coef; /* coefficient for slew rate calibrate */
> };
>
> +#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
> +
> +enum u2_phy_params {
> + U2P_EYE_VRT = 0,
> + U2P_EYE_TERM,
> + U2P_EFUSE_EN,
> + U2P_EFUSE_INTR,
> + U2P_DISCTH,
> + U2P_PRE_EMPHASIS,
> +};
> +
> +enum u3_phy_params {
> + U3P_EFUSE_EN = 0,
> + U3P_EFUSE_INTR,
> + U3P_EFUSE_TX_IMP,
> + U3P_EFUSE_RX_IMP,
> +};
> +
> +static const char *const u2_phy_files[] = {
> + [U2P_EYE_VRT] = "vrt",
> + [U2P_EYE_TERM] = "term",
> + [U2P_EFUSE_EN] = "efuse",
> + [U2P_EFUSE_INTR] = "intr",
> + [U2P_DISCTH] = "discth",
> + [U2P_PRE_EMPHASIS] = "preemph",
> +};
> +
> +static const char *const u3_phy_files[] = {
> + [U3P_EFUSE_EN] = "efuse",
> + [U3P_EFUSE_INTR] = "intr",
> + [U3P_EFUSE_TX_IMP] = "tx-imp",
> + [U3P_EFUSE_RX_IMP] = "rx-imp",
> +};
> +
> +static int u2_phy_params_show(struct seq_file *sf, void *unused)
> +{
> + struct mtk_phy_instance *inst = sf->private;
> + const char *fname = file_dentry(sf->file)->d_iname;
> + struct u2phy_banks *u2_banks = &inst->u2_banks;
> + void __iomem *com = u2_banks->com;
> + u32 max = 0;
> + u32 tmp = 0;
> + u32 val = 0;
> + int ret;
> +
> + ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
> + if (ret < 0)
> + return ret;
> +
> + switch (ret) {
> + case U2P_EYE_VRT:
> + tmp = readl(com + U3P_USBPHYACR1);
> + val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
> + max = FIELD_MAX(PA1_RG_VRT_SEL);
> + break;
> +
> + case U2P_EYE_TERM:
> + tmp = readl(com + U3P_USBPHYACR1);
> + val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
> + max = FIELD_MAX(PA1_RG_TERM_SEL);
> + break;
> +
> + case U2P_EFUSE_EN:
> + if (u2_banks->misc) {
> + tmp = readl(u2_banks->misc + U3P_MISC_REG1);
> + max = 1;
> + }
> +
> + val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
> + break;
> +
> + case U2P_EFUSE_INTR:
> + tmp = readl(com + U3P_USBPHYACR1);
> + val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
> + max = FIELD_MAX(PA1_RG_INTR_CAL);
> + break;
> +
> + case U2P_DISCTH:
> + tmp = readl(com + U3P_USBPHYACR6);
> + val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
> + max = FIELD_MAX(PA6_RG_U2_DISCTH);
> + break;
> +
> + case U2P_PRE_EMPHASIS:
> + tmp = readl(com + U3P_USBPHYACR6);
> + val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
> + max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
> + break;
> +
> + default:
> + seq_printf(sf, "invalid, %d\n", ret);
> + break;
> + }
> +
> + seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
> +
> + return 0;
> +}
> +
> +static int u2_phy_params_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, u2_phy_params_show, inode->i_private);
> +}
> +
> +static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
> + size_t count, loff_t *ppos)
so are we writing to phy registers from userspace, why?
> +{
> + const char *fname = file_dentry(file)->d_iname;
> + struct seq_file *sf = file->private_data;
> + struct mtk_phy_instance *inst = sf->private;
> + struct u2phy_banks *u2_banks = &inst->u2_banks;
> + void __iomem *com = u2_banks->com;
> + ssize_t rc;
> + u32 val;
> + int ret;
> +
> + rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
> + if (rc)
> + return rc;
> +
> + ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
> + if (ret < 0)
> + return (ssize_t)ret;
> +
> + switch (ret) {
> + case U2P_EYE_VRT:
> + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
> + break;
> +
> + case U2P_EYE_TERM:
> + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
> + break;
> +
> + case U2P_EFUSE_EN:
> + if (u2_banks->misc)
> + mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
> + MR1_EFUSE_AUTO_LOAD_DIS, !!val);
> + break;
> +
> + case U2P_EFUSE_INTR:
> + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
> + break;
> +
> + case U2P_DISCTH:
> + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
> + break;
> +
> + case U2P_PRE_EMPHASIS:
> + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
> + break;
> +
> + default:
> + break;
> + }
> +
> + return count;
> +}
> +
> +static const struct file_operations u2_phy_fops = {
> + .open = u2_phy_params_open,
> + .write = u2_phy_params_write,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> +static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
> +{
> + u32 count = ARRAY_SIZE(u2_phy_files);
> + int i;
> +
> + for (i = 0; i < count; i++)
> + debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs, inst, &u2_phy_fops);
pls use
> +}
> +
> +static int u3_phy_params_show(struct seq_file *sf, void *unused)
> +{
> + struct mtk_phy_instance *inst = sf->private;
> + const char *fname = file_dentry(sf->file)->d_iname;
> + struct u3phy_banks *u3_banks = &inst->u3_banks;
> + u32 val = 0;
> + u32 max = 0;
> + u32 tmp;
> + int ret;
> +
> + ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
> + if (ret < 0)
> + return ret;
> +
> + switch (ret) {
> + case U3P_EFUSE_EN:
> + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
> + val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
> + max = 1;
> + break;
> +
> + case U3P_EFUSE_INTR:
> + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
> + val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
> + max = FIELD_MAX(P3A_RG_IEXT_INTR);
> + break;
> +
> + case U3P_EFUSE_TX_IMP:
> + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
> + val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
> + max = FIELD_MAX(P3D_RG_TX_IMPEL);
> + break;
> +
> + case U3P_EFUSE_RX_IMP:
> + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
> + val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
> + max = FIELD_MAX(P3D_RG_RX_IMPEL);
> + break;
> +
> + default:
> + seq_printf(sf, "invalid, %d\n", ret);
> + break;
> + }
> +
> + seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
> +
> + return 0;
> +}
> +
> +static int u3_phy_params_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, u3_phy_params_show, inode->i_private);
> +}
> +
> +static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
> + size_t count, loff_t *ppos)
> +{
> + const char *fname = file_dentry(file)->d_iname;
> + struct seq_file *sf = file->private_data;
> + struct mtk_phy_instance *inst = sf->private;
> + struct u3phy_banks *u3_banks = &inst->u3_banks;
> + void __iomem *phyd = u3_banks->phyd;
> + ssize_t rc;
> + u32 val;
> + int ret;
> +
> + rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
> + if (rc)
> + return rc;
> +
> + ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
> + if (ret < 0)
> + return (ssize_t)ret;
> +
> + switch (ret) {
> + case U3P_EFUSE_EN:
> + mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
> + P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
> + break;
> +
> + case U3P_EFUSE_INTR:
> + mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, val);
> + break;
> +
> + case U3P_EFUSE_TX_IMP:
> + mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
> + mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
> + break;
> +
> + case U3P_EFUSE_RX_IMP:
> + mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
> + mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
> + break;
> +
> + default:
> + break;
> + }
> +
> + return count;
> +}
> +
> +static const struct file_operations u3_phy_fops = {
> + .open = u3_phy_params_open,
> + .write = u3_phy_params_write,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> +static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
> +{
> + u32 count = ARRAY_SIZE(u3_phy_files);
> + int i;
> +
> + for (i = 0; i < count; i++)
> + debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs, inst, &u3_phy_fops);
> +}
> +
> +static int tphy_type_show(struct seq_file *sf, void *unused)
> +{
> + struct mtk_phy_instance *inst = sf->private;
> + const char *type;
> +
> + switch (inst->type) {
> + case PHY_TYPE_USB2:
> + type = "USB2";
> + break;
> + case PHY_TYPE_USB3:
> + type = "USB3";
> + break;
> + case PHY_TYPE_PCIE:
> + type = "PCIe";
> + break;
> + case PHY_TYPE_SGMII:
> + type = "SGMII";
> + break;
> + case PHY_TYPE_SATA:
> + type = "SATA";
> + break;
> + default:
> + type = "";
> + }
> +
> + seq_printf(sf, "%s\n", type);
> +
> + return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(tphy_type);
> +
> +static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
> +{
> + char name[16];
> +
> + snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
> + inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
> +
> + debugfs_create_file("type", 0444, inst->dbgfs, inst, &tphy_type_fops);
> +
> + switch (inst->type) {
> + case PHY_TYPE_USB2:
> + u2_phy_dbgfs_files_create(inst);
> + break;
> + case PHY_TYPE_USB3:
> + case PHY_TYPE_PCIE:
> + u3_phy_dbgfs_files_create(inst);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
> +{
> + debugfs_remove_recursive(inst->dbgfs);
> + inst->dbgfs = NULL;
> +}
> +
> +static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
> +{
> + tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev), phy_debug_root);
> +}
> +
> +static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
> +{
> + debugfs_remove_recursive(tphy->dbgfs_root);
> + tphy->dbgfs_root = NULL;
> +}
> +
> +#else
> +
> +static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
> +{}
> +
> +static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
> +{}
> +
> +static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
> +{}
> +
> +static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
> +{}
> +
> +#endif
> +
> static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
> struct mtk_phy_instance *instance)
> {
> @@ -1032,6 +1417,8 @@ static int mtk_phy_init(struct phy *phy)
> return -EINVAL;
> }
>
> + tphy_debugfs_init(tphy, instance);
> +
> return 0;
> }
>
> @@ -1068,6 +1455,8 @@ static int mtk_phy_exit(struct phy *phy)
> struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
>
> + tphy_debugfs_exit(instance);
> +
> if (instance->type == PHY_TYPE_USB2)
> u2_phy_instance_exit(tphy, instance);
>
> @@ -1295,15 +1684,29 @@ static int mtk_tphy_probe(struct platform_device *pdev)
> }
>
> provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
> + if (IS_ERR(provider))
> + return dev_err_probe(dev, PTR_ERR(provider), "probe failed\n");
> +
> + tphy_debugfs_root_create(tphy);
> + return 0;
>
> - return PTR_ERR_OR_ZERO(provider);
> put_child:
> of_node_put(child_np);
> return retval;
> }
>
> +static int mtk_tphy_remove(struct platform_device *pdev)
> +{
> + struct mtk_tphy *tphy;
> +
> + tphy = platform_get_drvdata(pdev);
> + tphy_debugfs_root_remove(tphy);
> + return 0;
> +}
> +
> static struct platform_driver mtk_tphy_driver = {
> .probe = mtk_tphy_probe,
> + .remove = mtk_tphy_remove,
> .driver = {
> .name = "mtk-tphy",
> .of_match_table = mtk_tphy_id_table,
> --
> 2.18.0
On Thu, 2022-11-24 at 23:17 +0530, Vinod Koul wrote:
> On 10-11-22, 21:27, Chunfeng Yun wrote:
> > These debugfs files are mainly used to make eye diagram test
> > easier,
> > especially helpful to do HQA test for a new IC without efuse
> > enabled.
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v4: fix build warning of sometimes uninitialized variable
> >
> > v3: fix typo of "debugfs" suggested by AngeloGioacchino
> >
> > v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
> > ---
> > drivers/phy/mediatek/Kconfig | 5 +
> > drivers/phy/mediatek/phy-mtk-tphy.c | 405
> > +++++++++++++++++++++++++++-
> > 2 files changed, 409 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/phy/mediatek/Kconfig
> > b/drivers/phy/mediatek/Kconfig
> > index 3125ecb5d119..e9fdfe9f519f 100644
> > --- a/drivers/phy/mediatek/Kconfig
> > +++ b/drivers/phy/mediatek/Kconfig
> > @@ -27,6 +27,11 @@ config PHY_MTK_TPHY
> > multi-ports is first version, otherwise is second version,
> > so you can easily distinguish them by banks layout.
> >
> > +config PHY_MTK_TPHY_DEBUGFS
> > + bool "Add T-PHY Debugfs Files"
> > + help
> > + Say Y here to add debugfs files mainly for T-PHY HQA test.
>
> Why do we need a config option for this, is debugfs config option not
> sufficient?
We may want to disable these files even debugfs config is enabled in
release image, and prefer to use them only when bring up new IC.
>
> > +
> > config PHY_MTK_UFS
> > tristate "MediaTek UFS M-PHY driver"
> > depends on ARCH_MEDIATEK || COMPILE_TEST
> > diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c
> > b/drivers/phy/mediatek/phy-mtk-tphy.c
> > index e906a82791bd..f220a9a409bf 100644
> > --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> > +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> > @@ -7,6 +7,7 @@
> >
> > #include <dt-bindings/phy/phy.h>
> > #include <linux/clk.h>
> > +#include <linux/debugfs.h>
> > #include <linux/delay.h>
> > #include <linux/iopoll.h>
> > #include <linux/mfd/syscon.h>
> > @@ -264,6 +265,8 @@
> >
> > #define TPHY_CLKS_CNT 2
> >
> > +#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
> > +
> > enum mtk_phy_version {
> > MTK_PHY_V1 = 1,
> > MTK_PHY_V2,
> > @@ -310,6 +313,7 @@ struct mtk_phy_instance {
> > struct clk_bulk_data clks[TPHY_CLKS_CNT];
> > u32 index;
> > u32 type;
> > + struct dentry *dbgfs;
> > struct regmap *type_sw;
> > u32 type_sw_reg;
> > u32 type_sw_index;
> > @@ -332,10 +336,391 @@ struct mtk_tphy {
> > const struct mtk_phy_pdata *pdata;
> > struct mtk_phy_instance **phys;
> > int nphys;
> > + struct dentry *dbgfs_root;
> > int src_ref_clk; /* MHZ, reference clock for slew rate
> > calibrate */
> > int src_coef; /* coefficient for slew rate calibrate */
> > };
> >
> > +#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
> > +
> > +enum u2_phy_params {
> > + U2P_EYE_VRT = 0,
> > + U2P_EYE_TERM,
> > + U2P_EFUSE_EN,
> > + U2P_EFUSE_INTR,
> > + U2P_DISCTH,
> > + U2P_PRE_EMPHASIS,
> > +};
> > +
> > +enum u3_phy_params {
> > + U3P_EFUSE_EN = 0,
> > + U3P_EFUSE_INTR,
> > + U3P_EFUSE_TX_IMP,
> > + U3P_EFUSE_RX_IMP,
> > +};
> > +
> > +static const char *const u2_phy_files[] = {
> > + [U2P_EYE_VRT] = "vrt",
> > + [U2P_EYE_TERM] = "term",
> > + [U2P_EFUSE_EN] = "efuse",
> > + [U2P_EFUSE_INTR] = "intr",
> > + [U2P_DISCTH] = "discth",
> > + [U2P_PRE_EMPHASIS] = "preemph",
> > +};
> > +
> > +static const char *const u3_phy_files[] = {
> > + [U3P_EFUSE_EN] = "efuse",
> > + [U3P_EFUSE_INTR] = "intr",
> > + [U3P_EFUSE_TX_IMP] = "tx-imp",
> > + [U3P_EFUSE_RX_IMP] = "rx-imp",
> > +};
> > +
> > +static int u2_phy_params_show(struct seq_file *sf, void *unused)
> > +{
> > + struct mtk_phy_instance *inst = sf->private;
> > + const char *fname = file_dentry(sf->file)->d_iname;
> > + struct u2phy_banks *u2_banks = &inst->u2_banks;
> > + void __iomem *com = u2_banks->com;
> > + u32 max = 0;
> > + u32 tmp = 0;
> > + u32 val = 0;
> > + int ret;
> > +
> > + ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files),
> > fname);
> > + if (ret < 0)
> > + return ret;
> > +
> > + switch (ret) {
> > + case U2P_EYE_VRT:
> > + tmp = readl(com + U3P_USBPHYACR1);
> > + val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
> > + max = FIELD_MAX(PA1_RG_VRT_SEL);
> > + break;
> > +
> > + case U2P_EYE_TERM:
> > + tmp = readl(com + U3P_USBPHYACR1);
> > + val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
> > + max = FIELD_MAX(PA1_RG_TERM_SEL);
> > + break;
> > +
> > + case U2P_EFUSE_EN:
> > + if (u2_banks->misc) {
> > + tmp = readl(u2_banks->misc + U3P_MISC_REG1);
> > + max = 1;
> > + }
> > +
> > + val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
> > + break;
> > +
> > + case U2P_EFUSE_INTR:
> > + tmp = readl(com + U3P_USBPHYACR1);
> > + val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
> > + max = FIELD_MAX(PA1_RG_INTR_CAL);
> > + break;
> > +
> > + case U2P_DISCTH:
> > + tmp = readl(com + U3P_USBPHYACR6);
> > + val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
> > + max = FIELD_MAX(PA6_RG_U2_DISCTH);
> > + break;
> > +
> > + case U2P_PRE_EMPHASIS:
> > + tmp = readl(com + U3P_USBPHYACR6);
> > + val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
> > + max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
> > + break;
> > +
> > + default:
> > + seq_printf(sf, "invalid, %d\n", ret);
> > + break;
> > + }
> > +
> > + seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
> > +
> > + return 0;
> > +}
> > +
> > +static int u2_phy_params_open(struct inode *inode, struct file
> > *file)
> > +{
> > + return single_open(file, u2_phy_params_show, inode->i_private);
> > +}
> > +
> > +static ssize_t u2_phy_params_write(struct file *file, const char
> > __user *ubuf,
> > + size_t count, loff_t *ppos)
>
> so are we writing to phy registers from userspace, why?
Mainly because when bring up a new ic which efuse is not set, we need
to tune some parameters many times for eye diagram test, using debugfs
files will make it easier at runtime.
Thanks a lot
>
> > +{
> > + const char *fname = file_dentry(file)->d_iname;
> > + struct seq_file *sf = file->private_data;
> > + struct mtk_phy_instance *inst = sf->private;
> > + struct u2phy_banks *u2_banks = &inst->u2_banks;
> > + void __iomem *com = u2_banks->com;
> > + ssize_t rc;
> > + u32 val;
> > + int ret;
> > +
> > + rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
> > + if (rc)
> > + return rc;
> > +
> > + ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files),
> > fname);
> > + if (ret < 0)
> > + return (ssize_t)ret;
> > +
> > + switch (ret) {
> > + case U2P_EYE_VRT:
> > + mtk_phy_update_field(com + U3P_USBPHYACR1,
> > PA1_RG_VRT_SEL, val);
> > + break;
> > +
> > + case U2P_EYE_TERM:
> > + mtk_phy_update_field(com + U3P_USBPHYACR1,
> > PA1_RG_TERM_SEL, val);
> > + break;
> > +
> > + case U2P_EFUSE_EN:
> > + if (u2_banks->misc)
> > + mtk_phy_update_field(u2_banks->misc +
> > U3P_MISC_REG1,
> > + MR1_EFUSE_AUTO_LOAD_DIS,
> > !!val);
> > + break;
> > +
> > + case U2P_EFUSE_INTR:
> > + mtk_phy_update_field(com + U3P_USBPHYACR1,
> > PA1_RG_INTR_CAL, val);
> > + break;
> > +
> > + case U2P_DISCTH:
> > + mtk_phy_update_field(com + U3P_USBPHYACR6,
> > PA6_RG_U2_DISCTH, val);
> > + break;
> > +
> > + case U2P_PRE_EMPHASIS:
> > + mtk_phy_update_field(com + U3P_USBPHYACR6,
> > PA6_RG_U2_PRE_EMP, val);
> > + break;
> > +
> > + default:
> > + break;
> > + }
> > +
> > + return count;
> > +}
> > +
> > +static const struct file_operations u2_phy_fops = {
> > + .open = u2_phy_params_open,
> > + .write = u2_phy_params_write,
> > + .read = seq_read,
> > + .llseek = seq_lseek,
> > + .release = single_release,
> > +};
> > +
> > +static void u2_phy_dbgfs_files_create(struct mtk_phy_instance
> > *inst)
> > +{
> > + u32 count = ARRAY_SIZE(u2_phy_files);
> > + int i;
> > +
> > + for (i = 0; i < count; i++)
> > + debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs,
> > inst, &u2_phy_fops);
>
> pls use
> > +}
> > +
> > +static int u3_phy_params_show(struct seq_file *sf, void *unused)
> > +{
> > + struct mtk_phy_instance *inst = sf->private;
> > + const char *fname = file_dentry(sf->file)->d_iname;
> > + struct u3phy_banks *u3_banks = &inst->u3_banks;
> > + u32 val = 0;
> > + u32 max = 0;
> > + u32 tmp;
> > + int ret;
> > +
> > + ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files),
> > fname);
> > + if (ret < 0)
> > + return ret;
> > +
> > + switch (ret) {
> > + case U3P_EFUSE_EN:
> > + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
> > + val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
> > + max = 1;
> > + break;
> > +
> > + case U3P_EFUSE_INTR:
> > + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
> > + val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
> > + max = FIELD_MAX(P3A_RG_IEXT_INTR);
> > + break;
> > +
> > + case U3P_EFUSE_TX_IMP:
> > + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
> > + val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
> > + max = FIELD_MAX(P3D_RG_TX_IMPEL);
> > + break;
> > +
> > + case U3P_EFUSE_RX_IMP:
> > + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
> > + val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
> > + max = FIELD_MAX(P3D_RG_RX_IMPEL);
> > + break;
> > +
> > + default:
> > + seq_printf(sf, "invalid, %d\n", ret);
> > + break;
> > + }
> > +
> > + seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
> > +
> > + return 0;
> > +}
> > +
> > +static int u3_phy_params_open(struct inode *inode, struct file
> > *file)
> > +{
> > + return single_open(file, u3_phy_params_show, inode->i_private);
> > +}
> > +
> > +static ssize_t u3_phy_params_write(struct file *file, const char
> > __user *ubuf,
> > + size_t count, loff_t *ppos)
> > +{
> > + const char *fname = file_dentry(file)->d_iname;
> > + struct seq_file *sf = file->private_data;
> > + struct mtk_phy_instance *inst = sf->private;
> > + struct u3phy_banks *u3_banks = &inst->u3_banks;
> > + void __iomem *phyd = u3_banks->phyd;
> > + ssize_t rc;
> > + u32 val;
> > + int ret;
> > +
> > + rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
> > + if (rc)
> > + return rc;
> > +
> > + ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files),
> > fname);
> > + if (ret < 0)
> > + return (ssize_t)ret;
> > +
> > + switch (ret) {
> > + case U3P_EFUSE_EN:
> > + mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
> > + P3D_RG_EFUSE_AUTO_LOAD_DIS,
> > !!val);
> > + break;
> > +
> > + case U3P_EFUSE_INTR:
> > + mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0,
> > P3A_RG_IEXT_INTR, val);
> > + break;
> > +
> > + case U3P_EFUSE_TX_IMP:
> > + mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0,
> > P3D_RG_TX_IMPEL, val);
> > + mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0,
> > P3D_RG_FORCE_TX_IMPEL);
> > + break;
> > +
> > + case U3P_EFUSE_RX_IMP:
> > + mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1,
> > P3D_RG_RX_IMPEL, val);
> > + mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1,
> > P3D_RG_FORCE_RX_IMPEL);
> > + break;
> > +
> > + default:
> > + break;
> > + }
> > +
> > + return count;
> > +}
> > +
> > +static const struct file_operations u3_phy_fops = {
> > + .open = u3_phy_params_open,
> > + .write = u3_phy_params_write,
> > + .read = seq_read,
> > + .llseek = seq_lseek,
> > + .release = single_release,
> > +};
> > +
> > +static void u3_phy_dbgfs_files_create(struct mtk_phy_instance
> > *inst)
> > +{
> > + u32 count = ARRAY_SIZE(u3_phy_files);
> > + int i;
> > +
> > + for (i = 0; i < count; i++)
> > + debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs,
> > inst, &u3_phy_fops);
> > +}
> > +
> > +static int tphy_type_show(struct seq_file *sf, void *unused)
> > +{
> > + struct mtk_phy_instance *inst = sf->private;
> > + const char *type;
> > +
> > + switch (inst->type) {
> > + case PHY_TYPE_USB2:
> > + type = "USB2";
> > + break;
> > + case PHY_TYPE_USB3:
> > + type = "USB3";
> > + break;
> > + case PHY_TYPE_PCIE:
> > + type = "PCIe";
> > + break;
> > + case PHY_TYPE_SGMII:
> > + type = "SGMII";
> > + break;
> > + case PHY_TYPE_SATA:
> > + type = "SATA";
> > + break;
> > + default:
> > + type = "";
> > + }
> > +
> > + seq_printf(sf, "%s\n", type);
> > +
> > + return 0;
> > +}
> > +
> > +DEFINE_SHOW_ATTRIBUTE(tphy_type);
> > +
> > +static void tphy_debugfs_init(struct mtk_tphy *tphy, struct
> > mtk_phy_instance *inst)
> > +{
> > + char name[16];
> > +
> > + snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
> > + inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
> > +
> > + debugfs_create_file("type", 0444, inst->dbgfs, inst,
> > &tphy_type_fops);
> > +
> > + switch (inst->type) {
> > + case PHY_TYPE_USB2:
> > + u2_phy_dbgfs_files_create(inst);
> > + break;
> > + case PHY_TYPE_USB3:
> > + case PHY_TYPE_PCIE:
> > + u3_phy_dbgfs_files_create(inst);
> > + break;
> > + default:
> > + break;
> > + }
> > +}
> > +
> > +static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
> > +{
> > + debugfs_remove_recursive(inst->dbgfs);
> > + inst->dbgfs = NULL;
> > +}
> > +
> > +static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
> > +{
> > + tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev),
> > phy_debug_root);
> > +}
> > +
> > +static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
> > +{
> > + debugfs_remove_recursive(tphy->dbgfs_root);
> > + tphy->dbgfs_root = NULL;
> > +}
> > +
> > +#else
> > +
> > +static void tphy_debugfs_init(struct mtk_tphy *tphy, struct
> > mtk_phy_instance *inst)
> > +{}
> > +
> > +static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
> > +{}
> > +
> > +static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
> > +{}
> > +
> > +static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
> > +{}
> > +
> > +#endif
> > +
> > static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
> > struct mtk_phy_instance *instance)
> > {
> > @@ -1032,6 +1417,8 @@ static int mtk_phy_init(struct phy *phy)
> > return -EINVAL;
> > }
> >
> > + tphy_debugfs_init(tphy, instance);
> > +
> > return 0;
> > }
> >
> > @@ -1068,6 +1455,8 @@ static int mtk_phy_exit(struct phy *phy)
> > struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> > struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
> >
> > + tphy_debugfs_exit(instance);
> > +
> > if (instance->type == PHY_TYPE_USB2)
> > u2_phy_instance_exit(tphy, instance);
> >
> > @@ -1295,15 +1684,29 @@ static int mtk_tphy_probe(struct
> > platform_device *pdev)
> > }
> >
> > provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
> > + if (IS_ERR(provider))
> > + return dev_err_probe(dev, PTR_ERR(provider), "probe
> > failed\n");
> > +
> > + tphy_debugfs_root_create(tphy);
> > + return 0;
> >
> > - return PTR_ERR_OR_ZERO(provider);
> > put_child:
> > of_node_put(child_np);
> > return retval;
> > }
> >
> > +static int mtk_tphy_remove(struct platform_device *pdev)
> > +{
> > + struct mtk_tphy *tphy;
> > +
> > + tphy = platform_get_drvdata(pdev);
> > + tphy_debugfs_root_remove(tphy);
> > + return 0;
> > +}
> > +
> > static struct platform_driver mtk_tphy_driver = {
> > .probe = mtk_tphy_probe,
> > + .remove = mtk_tphy_remove,
> > .driver = {
> > .name = "mtk-tphy",
> > .of_match_table = mtk_tphy_id_table,
> > --
> > 2.18.0
>
>
On Mon, Nov 28, 2022 at 07:26:02AM +0000, Chunfeng Yun (云春峰) wrote:
> On Thu, 2022-11-24 at 23:17 +0530, Vinod Koul wrote:
> > On 10-11-22, 21:27, Chunfeng Yun wrote:
> > > These debugfs files are mainly used to make eye diagram test
> > > easier,
> > > especially helpful to do HQA test for a new IC without efuse
> > > enabled.
Exporting data for eye diagrams seems like something many PHYs could
use. Please consider adding an official uniform API which any PHY
could use, so we don't end up with lots of incompatible formats in
debugfs.
Andrew
On Mon, 2022-11-28 at 15:00 +0100, Andrew Lunn wrote:
> On Mon, Nov 28, 2022 at 07:26:02AM +0000, Chunfeng Yun (云春峰) wrote:
> > On Thu, 2022-11-24 at 23:17 +0530, Vinod Koul wrote:
> > > On 10-11-22, 21:27, Chunfeng Yun wrote:
> > > > These debugfs files are mainly used to make eye diagram test
> > > > easier,
> > > > especially helpful to do HQA test for a new IC without efuse
> > > > enabled.
>
> Exporting data for eye diagrams seems like something many PHYs could
> use. Please consider adding an official uniform API which any PHY
> could use, so we don't end up with lots of incompatible formats in
> debugfs.
Good idea, but it seems difficult to do it due to the settings of phy
controllers are not common.
>
> Andrew
On Sat, Dec 03, 2022 at 02:53:19PM +0000, Chunfeng Yun (云春峰) wrote:
> On Mon, 2022-11-28 at 15:00 +0100, Andrew Lunn wrote:
> > On Mon, Nov 28, 2022 at 07:26:02AM +0000, Chunfeng Yun (云春峰) wrote:
> > > On Thu, 2022-11-24 at 23:17 +0530, Vinod Koul wrote:
> > > > On 10-11-22, 21:27, Chunfeng Yun wrote:
> > > > > These debugfs files are mainly used to make eye diagram test
> > > > > easier,
> > > > > especially helpful to do HQA test for a new IC without efuse
> > > > > enabled.
> >
> > Exporting data for eye diagrams seems like something many PHYs could
> > use. Please consider adding an official uniform API which any PHY
> > could use, so we don't end up with lots of incompatible formats in
> > debugfs.
> Good idea, but it seems difficult to do it due to the settings of phy
> controllers are not common.
Do you have clear documentation about the values are exporting? Do you
have a documented procedure for the tests?
We need to collect together documentation from multiple vendors and
see what is common. Maybe nothing is common, maybe a lot is in common.
We won't know until we actually compare them.
I implemented cable testing for Ethernet PHYs. They are all different,
but actual give very similar results, so can have one common
description. How many different ways is there to make eye diagram
tests?
Andrew
@@ -27,6 +27,11 @@ config PHY_MTK_TPHY
multi-ports is first version, otherwise is second version,
so you can easily distinguish them by banks layout.
+config PHY_MTK_TPHY_DEBUGFS
+ bool "Add T-PHY Debugfs Files"
+ help
+ Say Y here to add debugfs files mainly for T-PHY HQA test.
+
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
@@ -7,6 +7,7 @@
#include <dt-bindings/phy/phy.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
@@ -264,6 +265,8 @@
#define TPHY_CLKS_CNT 2
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
enum mtk_phy_version {
MTK_PHY_V1 = 1,
MTK_PHY_V2,
@@ -310,6 +313,7 @@ struct mtk_phy_instance {
struct clk_bulk_data clks[TPHY_CLKS_CNT];
u32 index;
u32 type;
+ struct dentry *dbgfs;
struct regmap *type_sw;
u32 type_sw_reg;
u32 type_sw_index;
@@ -332,10 +336,391 @@ struct mtk_tphy {
const struct mtk_phy_pdata *pdata;
struct mtk_phy_instance **phys;
int nphys;
+ struct dentry *dbgfs_root;
int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
int src_coef; /* coefficient for slew rate calibrate */
};
+#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
+
+enum u2_phy_params {
+ U2P_EYE_VRT = 0,
+ U2P_EYE_TERM,
+ U2P_EFUSE_EN,
+ U2P_EFUSE_INTR,
+ U2P_DISCTH,
+ U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+ U3P_EFUSE_EN = 0,
+ U3P_EFUSE_INTR,
+ U3P_EFUSE_TX_IMP,
+ U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+ [U2P_EYE_VRT] = "vrt",
+ [U2P_EYE_TERM] = "term",
+ [U2P_EFUSE_EN] = "efuse",
+ [U2P_EFUSE_INTR] = "intr",
+ [U2P_DISCTH] = "discth",
+ [U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+ [U3P_EFUSE_EN] = "efuse",
+ [U3P_EFUSE_INTR] = "intr",
+ [U3P_EFUSE_TX_IMP] = "tx-imp",
+ [U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+ struct mtk_phy_instance *inst = sf->private;
+ const char *fname = file_dentry(sf->file)->d_iname;
+ struct u2phy_banks *u2_banks = &inst->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 max = 0;
+ u32 tmp = 0;
+ u32 val = 0;
+ int ret;
+
+ ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+ if (ret < 0)
+ return ret;
+
+ switch (ret) {
+ case U2P_EYE_VRT:
+ tmp = readl(com + U3P_USBPHYACR1);
+ val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+ max = FIELD_MAX(PA1_RG_VRT_SEL);
+ break;
+
+ case U2P_EYE_TERM:
+ tmp = readl(com + U3P_USBPHYACR1);
+ val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+ max = FIELD_MAX(PA1_RG_TERM_SEL);
+ break;
+
+ case U2P_EFUSE_EN:
+ if (u2_banks->misc) {
+ tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+ max = 1;
+ }
+
+ val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+ break;
+
+ case U2P_EFUSE_INTR:
+ tmp = readl(com + U3P_USBPHYACR1);
+ val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+ max = FIELD_MAX(PA1_RG_INTR_CAL);
+ break;
+
+ case U2P_DISCTH:
+ tmp = readl(com + U3P_USBPHYACR6);
+ val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+ max = FIELD_MAX(PA6_RG_U2_DISCTH);
+ break;
+
+ case U2P_PRE_EMPHASIS:
+ tmp = readl(com + U3P_USBPHYACR6);
+ val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+ max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+ break;
+
+ default:
+ seq_printf(sf, "invalid, %d\n", ret);
+ break;
+ }
+
+ seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+ return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ const char *fname = file_dentry(file)->d_iname;
+ struct seq_file *sf = file->private_data;
+ struct mtk_phy_instance *inst = sf->private;
+ struct u2phy_banks *u2_banks = &inst->u2_banks;
+ void __iomem *com = u2_banks->com;
+ ssize_t rc;
+ u32 val;
+ int ret;
+
+ rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+ if (rc)
+ return rc;
+
+ ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+ if (ret < 0)
+ return (ssize_t)ret;
+
+ switch (ret) {
+ case U2P_EYE_VRT:
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+ break;
+
+ case U2P_EYE_TERM:
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+ break;
+
+ case U2P_EFUSE_EN:
+ if (u2_banks->misc)
+ mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+ MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+ break;
+
+ case U2P_EFUSE_INTR:
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+ break;
+
+ case U2P_DISCTH:
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+ break;
+
+ case U2P_PRE_EMPHASIS:
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+ break;
+
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+ .open = u2_phy_params_open,
+ .write = u2_phy_params_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+ u32 count = ARRAY_SIZE(u2_phy_files);
+ int i;
+
+ for (i = 0; i < count; i++)
+ debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs, inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+ struct mtk_phy_instance *inst = sf->private;
+ const char *fname = file_dentry(sf->file)->d_iname;
+ struct u3phy_banks *u3_banks = &inst->u3_banks;
+ u32 val = 0;
+ u32 max = 0;
+ u32 tmp;
+ int ret;
+
+ ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+ if (ret < 0)
+ return ret;
+
+ switch (ret) {
+ case U3P_EFUSE_EN:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+ val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+ max = 1;
+ break;
+
+ case U3P_EFUSE_INTR:
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+ max = FIELD_MAX(P3A_RG_IEXT_INTR);
+ break;
+
+ case U3P_EFUSE_TX_IMP:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+ val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+ max = FIELD_MAX(P3D_RG_TX_IMPEL);
+ break;
+
+ case U3P_EFUSE_RX_IMP:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+ val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+ max = FIELD_MAX(P3D_RG_RX_IMPEL);
+ break;
+
+ default:
+ seq_printf(sf, "invalid, %d\n", ret);
+ break;
+ }
+
+ seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+ return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ const char *fname = file_dentry(file)->d_iname;
+ struct seq_file *sf = file->private_data;
+ struct mtk_phy_instance *inst = sf->private;
+ struct u3phy_banks *u3_banks = &inst->u3_banks;
+ void __iomem *phyd = u3_banks->phyd;
+ ssize_t rc;
+ u32 val;
+ int ret;
+
+ rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+ if (rc)
+ return rc;
+
+ ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+ if (ret < 0)
+ return (ssize_t)ret;
+
+ switch (ret) {
+ case U3P_EFUSE_EN:
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+ P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+ break;
+
+ case U3P_EFUSE_INTR:
+ mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, val);
+ break;
+
+ case U3P_EFUSE_TX_IMP:
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+ mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+ break;
+
+ case U3P_EFUSE_RX_IMP:
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+ mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+ break;
+
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+ .open = u3_phy_params_open,
+ .write = u3_phy_params_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+ u32 count = ARRAY_SIZE(u3_phy_files);
+ int i;
+
+ for (i = 0; i < count; i++)
+ debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs, inst, &u3_phy_fops);
+}
+
+static int tphy_type_show(struct seq_file *sf, void *unused)
+{
+ struct mtk_phy_instance *inst = sf->private;
+ const char *type;
+
+ switch (inst->type) {
+ case PHY_TYPE_USB2:
+ type = "USB2";
+ break;
+ case PHY_TYPE_USB3:
+ type = "USB3";
+ break;
+ case PHY_TYPE_PCIE:
+ type = "PCIe";
+ break;
+ case PHY_TYPE_SGMII:
+ type = "SGMII";
+ break;
+ case PHY_TYPE_SATA:
+ type = "SATA";
+ break;
+ default:
+ type = "";
+ }
+
+ seq_printf(sf, "%s\n", type);
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tphy_type);
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{
+ char name[16];
+
+ snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
+ inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
+
+ debugfs_create_file("type", 0444, inst->dbgfs, inst, &tphy_type_fops);
+
+ switch (inst->type) {
+ case PHY_TYPE_USB2:
+ u2_phy_dbgfs_files_create(inst);
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_phy_dbgfs_files_create(inst);
+ break;
+ default:
+ break;
+ }
+}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{
+ debugfs_remove_recursive(inst->dbgfs);
+ inst->dbgfs = NULL;
+}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{
+ tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev), phy_debug_root);
+}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{
+ debugfs_remove_recursive(tphy->dbgfs_root);
+ tphy->dbgfs_root = NULL;
+}
+
+#else
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{}
+
+#endif
+
static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
@@ -1032,6 +1417,8 @@ static int mtk_phy_init(struct phy *phy)
return -EINVAL;
}
+ tphy_debugfs_init(tphy, instance);
+
return 0;
}
@@ -1068,6 +1455,8 @@ static int mtk_phy_exit(struct phy *phy)
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+ tphy_debugfs_exit(instance);
+
if (instance->type == PHY_TYPE_USB2)
u2_phy_instance_exit(tphy, instance);
@@ -1295,15 +1684,29 @@ static int mtk_tphy_probe(struct platform_device *pdev)
}
provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+ if (IS_ERR(provider))
+ return dev_err_probe(dev, PTR_ERR(provider), "probe failed\n");
+
+ tphy_debugfs_root_create(tphy);
+ return 0;
- return PTR_ERR_OR_ZERO(provider);
put_child:
of_node_put(child_np);
return retval;
}
+static int mtk_tphy_remove(struct platform_device *pdev)
+{
+ struct mtk_tphy *tphy;
+
+ tphy = platform_get_drvdata(pdev);
+ tphy_debugfs_root_remove(tphy);
+ return 0;
+}
+
static struct platform_driver mtk_tphy_driver = {
.probe = mtk_tphy_probe,
+ .remove = mtk_tphy_remove,
.driver = {
.name = "mtk-tphy",
.of_match_table = mtk_tphy_id_table,