diff mbox series

[v2,1/5] PCI: dwc: Refactor dw_pcie_edma_find_chip() API

Message ID 20240216-dw-hdma-v2-1-b42329003f43@linaro.org
State New
Headers
Series PCI: dwc: Add support for integrating HDMA with DWC EP driver |

Commit Message

Manivannan Sadhasivam Feb. 16, 2024, 5:34 p.m. UTC 
  In order to add support for Hyper DMA (HDMA), let's refactor the existing
dw_pcie_edma_find_chip() API by moving the common code to separate
functions.

No functional change.

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 40 +++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 7 deletions(-)

Comments

Siddharth Vadapalli Feb. 20, 2024, 12:11 p.m. UTC | #1 
On 24/02/16 11:04PM, Manivannan Sadhasivam wrote:
> In order to add support for Hyper DMA (HDMA), let's refactor the existing
> dw_pcie_edma_find_chip() API by moving the common code to separate
> functions.
> 
> No functional change.
> 
> Suggested-by: Serge Semin <fancer.lancer@gmail.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 40 +++++++++++++++++++++++-----
>  1 file changed, 33 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 250cf7f40b85..3a26dfc5368f 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -880,7 +880,17 @@ static struct dw_edma_plat_ops dw_pcie_edma_ops = {
>  	.irq_vector = dw_pcie_edma_irq_vector,
>  };
>  
> -static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
> +static void dw_pcie_edma_init_data(struct dw_pcie *pci)
> +{
> +	pci->edma.dev = pci->dev;
> +
> +	if (!pci->edma.ops)
> +		pci->edma.ops = &dw_pcie_edma_ops;
> +
> +	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
> +}
> +
> +static int dw_pcie_edma_find_mf(struct dw_pcie *pci)
>  {
>  	u32 val;
>  
> @@ -902,8 +912,6 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
>  
>  	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
>  		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
> -
> -		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
>  	} else if (val != 0xFFFFFFFF) {
>  		pci->edma.mf = EDMA_MF_EDMA_LEGACY;

Minor suggestion:

The above section prior to this patch was:
	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
		pci->edma.mf = EDMA_MF_EDMA_UNROLL;

		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
	} else if (val != 0xFFFFFFFF) {
		pci->edma.mf = EDMA_MF_EDMA_LEGACY;

		pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE;
	} else {
		return -ENODEV;
	}

And this patch is removing the call to dw_pcie_readl_dma() in the "if"
condition above. So the curly braces after this patch will only be
present because of the "else if" statement. So is the following change a
good idea?

	/* Assume it is EDMA_LEGACY by default but update it later if needed */
	pci->edma.mf = EDMA_MF_EDMA_LEGACY;

	if (val == 0xFFFFFFFF && pci->edma.reg_base)
		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
	else if (val != 0xFFFFFFFF)
		pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE;
	else
		return -ENODEV;


Regards,
Siddharth.
Manivannan Sadhasivam Feb. 21, 2024, 5:34 a.m. UTC | #2 
On Tue, Feb 20, 2024 at 05:41:41PM +0530, Siddharth Vadapalli wrote:
> On 24/02/16 11:04PM, Manivannan Sadhasivam wrote:
> > In order to add support for Hyper DMA (HDMA), let's refactor the existing
> > dw_pcie_edma_find_chip() API by moving the common code to separate
> > functions.
> > 
> > No functional change.
> > 
> > Suggested-by: Serge Semin <fancer.lancer@gmail.com>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/pci/controller/dwc/pcie-designware.c | 40 +++++++++++++++++++++++-----
> >  1 file changed, 33 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index 250cf7f40b85..3a26dfc5368f 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -880,7 +880,17 @@ static struct dw_edma_plat_ops dw_pcie_edma_ops = {
> >  	.irq_vector = dw_pcie_edma_irq_vector,
> >  };
> >  
> > -static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
> > +static void dw_pcie_edma_init_data(struct dw_pcie *pci)
> > +{
> > +	pci->edma.dev = pci->dev;
> > +
> > +	if (!pci->edma.ops)
> > +		pci->edma.ops = &dw_pcie_edma_ops;
> > +
> > +	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
> > +}
> > +
> > +static int dw_pcie_edma_find_mf(struct dw_pcie *pci)
> >  {
> >  	u32 val;
> >  
> > @@ -902,8 +912,6 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
> >  
> >  	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
> >  		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
> > -
> > -		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
> >  	} else if (val != 0xFFFFFFFF) {
> >  		pci->edma.mf = EDMA_MF_EDMA_LEGACY;
> 
> Minor suggestion:
> 
> The above section prior to this patch was:
> 	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
> 		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
> 
> 		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
> 	} else if (val != 0xFFFFFFFF) {
> 		pci->edma.mf = EDMA_MF_EDMA_LEGACY;
> 
> 		pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE;
> 	} else {
> 		return -ENODEV;
> 	}
> 
> And this patch is removing the call to dw_pcie_readl_dma() in the "if"
> condition above. So the curly braces after this patch will only be
> present because of the "else if" statement. So is the following change a
> good idea?
> 

Yes indeed. Actually, EDMA_MF_EDMA_LEGACY is the default mapping format (because
its value is 0x0), but setting it explicitly would also make sense.

- Mani
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 250cf7f40b85..3a26dfc5368f 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -880,7 +880,17 @@  static struct dw_edma_plat_ops dw_pcie_edma_ops = {
 	.irq_vector = dw_pcie_edma_irq_vector,
 };
 
-static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
+static void dw_pcie_edma_init_data(struct dw_pcie *pci)
+{
+	pci->edma.dev = pci->dev;
+
+	if (!pci->edma.ops)
+		pci->edma.ops = &dw_pcie_edma_ops;
+
+	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
+}
+
+static int dw_pcie_edma_find_mf(struct dw_pcie *pci)
 {
 	u32 val;
 
@@ -902,8 +912,6 @@  static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 
 	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
 		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
-
-		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
 	} else if (val != 0xFFFFFFFF) {
 		pci->edma.mf = EDMA_MF_EDMA_LEGACY;
 
@@ -912,12 +920,17 @@  static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 		return -ENODEV;
 	}
 
-	pci->edma.dev = pci->dev;
+	return 0;
+}
 
-	if (!pci->edma.ops)
-		pci->edma.ops = &dw_pcie_edma_ops;
+static int dw_pcie_edma_find_channels(struct dw_pcie *pci)
+{
+	u32 val;
 
-	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
+	if (pci->edma.mf == EDMA_MF_EDMA_LEGACY)
+		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
+	else
+		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
 
 	pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
 	pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
@@ -930,6 +943,19 @@  static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 	return 0;
 }
 
+static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
+{
+	int ret;
+
+	dw_pcie_edma_init_data(pci);
+
+	ret = dw_pcie_edma_find_mf(pci);
+	if (ret)
+		return ret;
+
+	return dw_pcie_edma_find_channels(pci);
+}
+
 static int dw_pcie_edma_irq_verify(struct dw_pcie *pci)
 {
 	struct platform_device *pdev = to_platform_device(pci->dev);