[v13,08/13] irqchip/riscv-imsic: Add device MSI domain support for PCI devices
Commit Message
The Linux PCI framework supports per-device MSI domains for PCI devices
so let us extend the IMSIC driver to allow per-device MSI domains for
PCI devices.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
drivers/irqchip/Kconfig | 7 +++++
drivers/irqchip/irq-riscv-imsic-platform.c | 36 ++++++++++++++++++++--
2 files changed, 41 insertions(+), 2 deletions(-)
Comments
On Tue, Feb 20 2024 at 11:37, Anup Patel wrote:
> static bool imsic_init_dev_msi_info(struct device *dev,
> struct irq_domain *domain,
> struct irq_domain *real_parent,
> @@ -218,6 +241,7 @@ static bool imsic_init_dev_msi_info(struct device *dev,
>
> /* MSI parent domain specific settings */
> switch (real_parent->bus_token) {
> + case DOMAIN_BUS_PCI_MSI:
case DOMAIN_BUS_PCI_DEVICE_MSIX:
?
Thanks,
tglx
On Tue, Feb 20, 2024 at 7:05 PM Thomas Gleixner <tglx@linutronix.de> wrote:
>
> On Tue, Feb 20 2024 at 11:37, Anup Patel wrote:
> > static bool imsic_init_dev_msi_info(struct device *dev,
> > struct irq_domain *domain,
> > struct irq_domain *real_parent,
> > @@ -218,6 +241,7 @@ static bool imsic_init_dev_msi_info(struct device *dev,
> >
> > /* MSI parent domain specific settings */
> > switch (real_parent->bus_token) {
> > + case DOMAIN_BUS_PCI_MSI:
>
> case DOMAIN_BUS_PCI_DEVICE_MSIX:
>
> ?
Actually, the DOMAIN_BUS_PCI_MSI is not needed because
the real parent domain is always the IMSIC base irq_domain
so DOMAIN_BUS_NEXUS is sufficient.
Better to just drop DOMAIN_BUS_PCI_MSI from this switch case ?
Regards,
Anup
On Tue, Feb 20 2024 at 22:51, Anup Patel wrote:
> On Tue, Feb 20, 2024 at 7:05 PM Thomas Gleixner <tglx@linutronix.de> wrote:
>>
>> On Tue, Feb 20 2024 at 11:37, Anup Patel wrote:
>> > static bool imsic_init_dev_msi_info(struct device *dev,
>> > struct irq_domain *domain,
>> > struct irq_domain *real_parent,
>> > @@ -218,6 +241,7 @@ static bool imsic_init_dev_msi_info(struct device *dev,
>> >
>> > /* MSI parent domain specific settings */
>> > switch (real_parent->bus_token) {
>> > + case DOMAIN_BUS_PCI_MSI:
>>
>> case DOMAIN_BUS_PCI_DEVICE_MSIX:
>>
>> ?
>
> Actually, the DOMAIN_BUS_PCI_MSI is not needed because
> the real parent domain is always the IMSIC base irq_domain
> so DOMAIN_BUS_NEXUS is sufficient.
Indeed. Obviously I can't read.
> Better to just drop DOMAIN_BUS_PCI_MSI from this switch case ?
Yes. I actually would be a bug if that ends up as the real parent
domain.
Thanks,
tglx
@@ -553,6 +553,13 @@ config RISCV_IMSIC
select GENERIC_IRQ_MATRIX_ALLOCATOR
select GENERIC_MSI_IRQ
+config RISCV_IMSIC_PCI
+ bool
+ depends on RISCV_IMSIC
+ depends on PCI
+ depends on PCI_MSI
+ default RISCV_IMSIC
+
config EXYNOS_IRQ_COMBINER
bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
@@ -14,6 +14,7 @@
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/msi.h>
+#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
@@ -209,6 +210,28 @@ static const struct irq_domain_ops imsic_base_domain_ops = {
#endif
};
+#ifdef CONFIG_RISCV_IMSIC_PCI
+
+static void imsic_pci_mask_irq(struct irq_data *d)
+{
+ pci_msi_mask_irq(d);
+ irq_chip_mask_parent(d);
+}
+
+static void imsic_pci_unmask_irq(struct irq_data *d)
+{
+ irq_chip_unmask_parent(d);
+ pci_msi_unmask_irq(d);
+}
+
+#define MATCH_PCI_MSI BIT(DOMAIN_BUS_PCI_MSI)
+
+#else
+
+#define MATCH_PCI_MSI 0
+
+#endif
+
static bool imsic_init_dev_msi_info(struct device *dev,
struct irq_domain *domain,
struct irq_domain *real_parent,
@@ -218,6 +241,7 @@ static bool imsic_init_dev_msi_info(struct device *dev,
/* MSI parent domain specific settings */
switch (real_parent->bus_token) {
+ case DOMAIN_BUS_PCI_MSI:
case DOMAIN_BUS_NEXUS:
if (WARN_ON_ONCE(domain != real_parent))
return false;
@@ -232,6 +256,13 @@ static bool imsic_init_dev_msi_info(struct device *dev,
/* Is the target supported? */
switch (info->bus_token) {
+#ifdef CONFIG_RISCV_IMSIC_PCI
+ case DOMAIN_BUS_PCI_DEVICE_MSI:
+ case DOMAIN_BUS_PCI_DEVICE_MSIX:
+ info->chip->irq_mask = imsic_pci_mask_irq;
+ info->chip->irq_unmask = imsic_pci_unmask_irq;
+ break;
+#endif
case DOMAIN_BUS_DEVICE_MSI:
/*
* Per-device MSI should never have any MSI feature bits
@@ -271,11 +302,12 @@ static bool imsic_init_dev_msi_info(struct device *dev,
#define MATCH_PLATFORM_MSI BIT(DOMAIN_BUS_PLATFORM_MSI)
static const struct msi_parent_ops imsic_msi_parent_ops = {
- .supported_flags = MSI_GENERIC_FLAGS_MASK,
+ .supported_flags = MSI_GENERIC_FLAGS_MASK |
+ MSI_FLAG_PCI_MSIX,
.required_flags = MSI_FLAG_USE_DEF_DOM_OPS |
MSI_FLAG_USE_DEF_CHIP_OPS,
.bus_select_token = DOMAIN_BUS_NEXUS,
- .bus_select_mask = MATCH_PLATFORM_MSI,
+ .bus_select_mask = MATCH_PCI_MSI | MATCH_PLATFORM_MSI,
.init_dev_msi_info = imsic_init_dev_msi_info,
};