diff mbox series

[12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor

Message ID 20240215-mbly-i2c-v1-12-19a336e91dca@bootlin.com
State New
Headers
Series Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts |

Commit Message

Théo Lebrun Feb. 15, 2024, 4:52 p.m. UTC 
  Declare the temperature sensor on I2C bus 2. Its label is the schematics
identifier.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski Feb. 16, 2024, 7:59 a.m. UTC | #1 
On 15/02/2024 17:52, Théo Lebrun wrote:
> Declare the temperature sensor on I2C bus 2. Its label is the schematics
> identifier.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> index 6898b2d8267d..1f8549acd40d 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> @@ -21,3 +21,11 @@ memory@0 {
>  		      <0x8 0x02000000 0x0 0x7E000000>;
>  	};
>  };
> +
> +&i2c2 {
> +	tmp112@48 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


temperature-sensor, power-sensor etc.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 6898b2d8267d..1f8549acd40d 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -21,3 +21,11 @@  memory@0 {
 		      <0x8 0x02000000 0x0 0x7E000000>;
 	};
 };
+
+&i2c2 {
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "U60";
+	};
+};