diff mbox series

[v2,1/2] regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550

Message ID 20221123153638.721254-2-abel.vesa@linaro.org
State New
Headers
Series regulator: qcom-rpmh: Add support for PM8550 |

Commit Message

Abel Vesa Nov. 23, 2022, 3:36 p.m. UTC 
  Add compatible string for PM8550 used in SM8550 boards.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

Changes since v1:
 * changed subject line according to Krzysztof's suggestion
 * dropped unrelated changes reported by Krzysztof

 .../regulator/qcom,rpmh-regulator.yaml        | 26 +++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Nov. 24, 2022, 9:55 a.m. UTC | #1 
On 23/11/2022 16:36, Abel Vesa wrote:
> Add compatible string for PM8550 used in SM8550 boards.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 7ff51b558702..297a75069f60 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -47,6 +47,7 @@  description: |
       For PM8350, smps1 - smps12, ldo1 - ldo10
       For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
       For PM8450, smps1 - smps6, ldo1 - ldo4
+      For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2
       For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
       For PMI8998, bob
       For PMR735A, smps1 - smps3, ldo1 - ldo7
@@ -70,6 +71,9 @@  properties:
       - qcom,pm8350-rpmh-regulators
       - qcom,pm8350c-rpmh-regulators
       - qcom,pm8450-rpmh-regulators
+      - qcom,pm8550-rpmh-regulators
+      - qcom,pm8550ve-rpmh-regulators
+      - qcom,pm8550vs-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
       - qcom,pmg1110-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
@@ -83,7 +87,7 @@  properties:
         RPMh resource name suffix used for the regulators found
         on this PMIC.
     $ref: /schemas/types.yaml#/definitions/string
-    enum: [a, b, c, d, e, f, h, k]
+    enum: [a, b, c, d, e, f, g, h, k]
 
   qcom,always-wait-for-ack:
     description: |
@@ -107,7 +111,7 @@  properties:
       regulator-allow-set-load: ["regulator-allowed-modes"]
 
 patternProperties:
-  "^(smps|ldo|lvs)[0-9]+$":
+  "^(smps|ldo|lvs|bob)[0-9]+$":
     type: object
     $ref: "regulator.yaml#"
     description: smps/ldo regulator nodes(s).
@@ -299,6 +303,24 @@  allOf:
         "^vdd-l[1-4]-supply$": true
         "^vdd-s[1-6]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8550-rpmh-regulators
+            - qcom,pm8550ve-rpmh-regulators
+            - qcom,pm8550vs-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l13-l14-supply: true
+        vdd-l5-l16-supply: true
+        vdd-l6-l7-supply: true
+        vdd-l8-l9-supply: true
+      patternProperties:
+        "^vdd-l([1-4]|1[0-7])-supply$": true
+        "^vdd-s[1-6]-supply$": true
+        "^vdd-bob[1-2]-supply$": true
+
   - if:
       properties:
         compatible: