[v2] arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface
Commit Message
From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Add support for Verdin USB1 interface, implements role switch
functionality using "gpio-usb-b-connector", VBUS is also now
controlled with "regulator-fixed" using a standard GPIO.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
v1:
- https://lore.kernel.org/all/20240209110500.22193-1-andrejs.cainikovs@gmail.com/
v2:
- fix GPIO naming as per rest of the file
---
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 55 +++++++++++++++++-----
1 file changed, 44 insertions(+), 11 deletions(-)
Comments
Hi Andrejs Cainikovs,
On Fri, 09 Feb 2024 14:01:06 +0100, Andrejs Cainikovs wrote:
> Add support for Verdin USB1 interface, implements role switch
> functionality using "gpio-usb-b-connector", VBUS is also now
> controlled with "regulator-fixed" using a standard GPIO.
>
>
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface
commit: 5125c19d75d8d9609dbcca1201f393fcb3b41c1d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
@@ -42,6 +42,22 @@ aliases {
usb1 = &usb1;
};
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_id>;
+ id-gpios = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+ label = "USB_1";
+ self-powered;
+ vbus-supply = <®_usb0_vbus>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb0_ep>;
+ };
+ };
+ };
+
verdin_gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -151,6 +167,18 @@ reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
vin-supply = <®_sd_3v3_1v8>;
};
+ reg_usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_en>;
+ enable-active-high;
+ /* Verdin USB_1_EN (SODIMM 155) */
+ gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "USB_1_EN";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -436,6 +464,13 @@ AM62X_IOPAD(0x0244, PIN_INPUT_PULLUP, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ /* SODIM
>;
};
+ /* Verdin USB_1_EN */
+ pinctrl_usb0_en: main-gpio1-50-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0254, PIN_INPUT, 7) /* (C20) USB0_DRVVBUS.GPIO1_50 */ /* SODIMM 155 */
+ >;
+ };
+
/* On-module I2C - PMIC_I2C */
pinctrl_i2c0: main-i2c0-default-pins {
pinctrl-single,pins = <
@@ -660,13 +695,6 @@ AM62X_IOPAD(0x0038, PIN_OUTPUT, 5) /* (E24) OSPI0_CSn3.UART5_TXD */ /*
>;
};
- /* Verdin USB_1 */
- pinctrl_usb0: main-usb0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */
- >;
- };
-
/* Verdin USB_2 */
pinctrl_usb1: main-usb1-default-pins {
pinctrl-single,pins = <
@@ -1013,7 +1041,7 @@ &main_gpio1 {
"",
"",
"SODIMM_17",
- "", /* 50 */
+ "SODIMM_155", /* 50 */
"",
"",
"",
@@ -1428,11 +1456,16 @@ &usbss0 {
status = "disabled";
};
-/* TODO: role swich using ID pin */
&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>;
+ adp-disable;
+ usb-role-switch;
status = "disabled";
+
+ port {
+ usb0_ep: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
+ };
};
/* Verdin USB_2 */