diff mbox series

[v2,2/2] arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number

Message ID 20240209171146.307465-2-romain.naour@smile.fr
State New
Headers
Series [v2,1/2] arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number |

Commit Message

Romain Naour Feb. 9, 2024, 5:11 p.m. UTC 
  The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
"interrupts" property.

Replace 9 by 7 for both tps659413 and tps659411 after checking in the
board schematic [1].

[1] https://www.ti.com/tool/SK-TDA4VM

Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
---
v2: update tps659411 interrupts parameter too.
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Neha Malcom Francis Feb. 14, 2024, 9:33 a.m. UTC | #1 
On 09/02/24 22:41, Romain Naour wrote:
> The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
> to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
> "interrupts" property.
> 
> Replace 9 by 7 for both tps659413 and tps659411 after checking in the
> board schematic [1].
> 
> [1] https://www.ti.com/tool/SK-TDA4VM
> 
> Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
> Cc: Neha Malcom Francis <n-francis@ti.com>
> Signed-off-by: Romain Naour <romain.naour@smile.fr>
> ---
> v2: update tps659411 interrupts parameter too.
> ---
>   arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> index 188dfe291a32..658764f7d544 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> @@ -574,7 +574,7 @@ tps659413: pmic@48 {
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&pmic_irq_pins_default>;
>   		interrupt-parent = <&wkup_gpio0>;
> -		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
>   		gpio-controller;
>   		#gpio-cells = <2>;
>   		ti,primary-pmic;
> @@ -651,7 +651,7 @@ tps659411: pmic@4c {
>   		reg = <0x4c>;
>   		system-power-controller;
>   		interrupt-parent = <&wkup_gpio0>;
> -		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
>   		gpio-controller;
>   		#gpio-cells = <2>;
>   		buck1234-supply = <&vsys_3v3>;


Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 188dfe291a32..658764f7d544 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -574,7 +574,7 @@  tps659413: pmic@48 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ti,primary-pmic;
@@ -651,7 +651,7 @@  tps659411: pmic@4c {
 		reg = <0x4c>;
 		system-power-controller;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		buck1234-supply = <&vsys_3v3>;