diff mbox series

[v2,12/17] ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios

Message ID 20240213010347.1075251-13-sre@kernel.org
State New
Headers
Series UNI-T UTi260B support |

Commit Message

Sebastian Reichel Feb. 13, 2024, 1:01 a.m. UTC 
  Replace all "xnur-gpio" with "xnur-gpios" in the
i.MX6UL(L) Touchscreen node.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi          | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts                | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

Comments

Fabio Estevam Feb. 13, 2024, 1:53 p.m. UTC | #1 
On Mon, Feb 12, 2024 at 10:03 PM Sebastian Reichel <sre@kernel.org> wrote:
>
> Replace all "xnur-gpio" with "xnur-gpios" in the
> i.MX6UL(L) Touchscreen node.

Please explain the reason for doing this.
Sebastian Reichel Feb. 13, 2024, 11:48 p.m. UTC | #2 
Hi,

On Tue, Feb 13, 2024 at 10:53:05AM -0300, Fabio Estevam wrote:
> On Mon, Feb 12, 2024 at 10:03 PM Sebastian Reichel <sre@kernel.org> wrote:
> > Replace all "xnur-gpio" with "xnur-gpios" in the
> > i.MX6UL(L) Touchscreen node.
> 
> Please explain the reason for doing this.

DT binding maintainers asked to use xnur-gpios instead of xnur-gpio
in the DT binding when converting to YAML (the -gpio suffix is
deprecated in favour of -gpios). This updates the DT files to become
compliant. The Linux kernel driver has already been using gpiod API
when it was added to the kernel, so this change is backwards compatible.

I will extend the description from this patch in v3.

-- Sebastian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 2ac40d69425b..f10f0525490b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -321,7 +321,7 @@  &snvs_pwrkey {
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xfff>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index 875ae699c5cb..2ca18f3dad0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -203,7 +203,7 @@  &pwm8 {
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 &sai2 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9b0..af337f18a266 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -156,7 +156,7 @@  &snvs_pwrkey {
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xffff>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
index 830b5a5064f2..6d2163250b5d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -273,7 +273,7 @@  &tsc {
 	pinctrl-names = "default";
 	pre-charge-time = <0xfff>;
 	touchscreen-average-samples = <32>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 /* DHCOM UART1 */