@@ -6,6 +6,18 @@
menu "Magnetometer sensors"
+config AF8133J
+ tristate "Voltafield AF8133J 3-Axis Magnetometer"
+ depends on I2C
+ depends on OF
+ select REGMAP_I2C
+ help
+ Say yes here to build support for Voltafield AF8133J I2C-based
+ 3-axis magnetometer chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called af8133j.
+
config AK8974
tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
depends on I2C
@@ -4,6 +4,7 @@
#
# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AF8133J) += af8133j.o
obj-$(CONFIG_AK8974) += ak8974.o
obj-$(CONFIG_AK8975) += ak8975.o
obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
new file mode 100644
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * af8133j.c - Voltafield AF8133J magnetometer driver
+ *
+ * Copyright 2021 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2024 Ondřej Jirman <megi@xff.cz>
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define AF8133J_DRV_NAME "af8133j"
+
+#define AF8133J_REG_OUT 0x03
+#define AF8133J_REG_PCODE 0x00
+#define AF8133J_REG_PCODE_VAL 0x5e
+#define AF8133J_REG_STATUS 0x02
+#define AF8133J_REG_STATUS_ACQ BIT(0)
+#define AF8133J_REG_STATE 0x0a
+#define AF8133J_REG_STATE_STBY 0x00
+#define AF8133J_REG_STATE_WORK 0x01
+#define AF8133J_REG_RANGE 0x0b
+#define AF8133J_REG_RANGE_22G 0x12
+#define AF8133J_REG_RANGE_12G 0x34
+#define AF8133J_REG_SWR 0x11
+#define AF8133J_REG_SWR_PERFORM 0x81
+
+static const char * const af8133j_supply_names[] = {
+ "avdd",
+ "dvdd",
+};
+
+#define AF8133J_NUM_SUPPLIES ARRAY_SIZE(af8133j_supply_names)
+
+struct af8133j_data {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct mutex mutex;
+ struct iio_mount_matrix orientation;
+
+ struct gpio_desc *reset_gpiod;
+ struct regulator_bulk_data supplies[AF8133J_NUM_SUPPLIES];
+
+ bool powered;
+ u8 range;
+};
+
+enum af8133j_axis {
+ AXIS_X = 0,
+ AXIS_Y,
+ AXIS_Z,
+};
+
+static struct iio_mount_matrix *
+af8133j_get_mount_matrix(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct af8133j_data *data = iio_priv(indio_dev);
+
+ return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info af8133j_ext_info[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, af8133j_get_mount_matrix),
+ { }
+};
+
+#define AF8133J_CHANNEL(_si, _axis) { \
+ .type = IIO_MAGN, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_ ## _axis, \
+ .address = AXIS_ ## _axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \
+ .ext_info = af8133j_ext_info, \
+ .scan_index = _si, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+static const struct iio_chan_spec af8133j_channels[] = {
+ AF8133J_CHANNEL(0, X),
+ AF8133J_CHANNEL(1, Y),
+ AF8133J_CHANNEL(2, Z),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static int af8133j_product_check(struct af8133j_data *data)
+{
+ struct device *dev = &data->client->dev;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(data->regmap, AF8133J_REG_PCODE, &val);
+ if (ret < 0) {
+ dev_err(dev, "Error reading product code (%d)\n", ret);
+ return ret;
+ }
+
+ if (val != AF8133J_REG_PCODE_VAL) {
+ dev_err(dev, "Invalid product code (0x%02x)\n", val);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int af8133j_reset(struct af8133j_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int ret;
+
+ if (data->reset_gpiod) {
+ /* If we have GPIO reset line, use it */
+ gpiod_set_value_cansleep(data->reset_gpiod, 1);
+ udelay(10);
+ gpiod_set_value_cansleep(data->reset_gpiod, 0);
+ } else {
+ /* Otherwise use software reset */
+ ret = regmap_write(data->regmap, AF8133J_REG_SWR,
+ AF8133J_REG_SWR_PERFORM);
+ if (ret < 0) {
+ dev_err(dev, "Failed to reset the chip\n");
+ return ret;
+ }
+ }
+
+ /* Wait for reset to finish */
+ usleep_range(1000, 1100);
+
+ /* Restore range setting */
+ if (data->range == AF8133J_REG_RANGE_22G) {
+ ret = regmap_write(data->regmap, AF8133J_REG_RANGE, data->range);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int af8133j_power_up(struct af8133j_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int ret;
+
+ if (data->powered)
+ return 0;
+
+ ret = regulator_bulk_enable(AF8133J_NUM_SUPPLIES, data->supplies);
+ if (ret) {
+ dev_err(dev, "Could not enable regulators\n");
+ return ret;
+ }
+
+ gpiod_set_value_cansleep(data->reset_gpiod, 0);
+
+ /* Wait for power on reset */
+ usleep_range(15000, 16000);
+
+ data->powered = true;
+ return 0;
+}
+
+static void af8133j_power_down(struct af8133j_data *data)
+{
+ if (!data->powered)
+ return;
+
+ gpiod_set_value_cansleep(data->reset_gpiod, 1);
+ regulator_bulk_disable(AF8133J_NUM_SUPPLIES, data->supplies);
+ data->powered = false;
+}
+
+static int af8133j_take_measurement(struct af8133j_data *data)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_write(data->regmap,
+ AF8133J_REG_STATE, AF8133J_REG_STATE_WORK);
+ if (ret < 0)
+ return ret;
+
+ /* The datasheet says "Mesaure Time <1.5ms" */
+ ret = regmap_read_poll_timeout(data->regmap, AF8133J_REG_STATUS, val,
+ val & AF8133J_REG_STATUS_ACQ,
+ 500, 1500);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(data->regmap,
+ AF8133J_REG_STATE, AF8133J_REG_STATE_STBY);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int af8133j_read_measurement(struct af8133j_data *data, __le16 buf[3])
+{
+ struct device *dev = &data->client->dev;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret) {
+ dev_err(dev, "failed to power on\n");
+ return ret;
+ }
+
+ mutex_lock(&data->mutex);
+
+ ret = af8133j_take_measurement(data);
+ if (ret == 0)
+ ret = regmap_bulk_read(data->regmap, AF8133J_REG_OUT,
+ buf, sizeof(__le16) * 3);
+
+ mutex_unlock(&data->mutex);
+
+ pm_runtime_mark_last_busy(dev);
+ if (pm_runtime_put_autosuspend(dev))
+ dev_err(dev, "failed to power off\n");
+
+ return ret;
+}
+
+static const int af8133j_scales[][2] = {
+ [0] = { 0, 366210 }, // 12 gauss
+ [1] = { 0, 671386 }, // 22 gauss
+};
+
+static int af8133j_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct af8133j_data *data = iio_priv(indio_dev);
+ __le16 buf[3];
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = af8133j_read_measurement(data, buf);
+ if (ret < 0)
+ return ret;
+
+ *val = sign_extend32(le16_to_cpu(buf[chan->address]),
+ chan->scan_type.realbits - 1);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = af8133j_scales[data->range == AF8133J_REG_RANGE_12G ? 0 : 1][1];
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int af8133j_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (const int *)af8133j_scales;
+ *length = ARRAY_SIZE(af8133j_scales) * 2;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int af8133j_set_scale(struct af8133j_data *data,
+ unsigned int val, unsigned int val2)
+{
+ u8 range;
+ int ret;
+
+ if (af8133j_scales[0][0] == val && af8133j_scales[0][1] == val2)
+ range = AF8133J_REG_RANGE_12G;
+ else if (af8133j_scales[1][0] == val && af8133j_scales[1][1] == val2)
+ range = AF8133J_REG_RANGE_22G;
+ else
+ return -EINVAL;
+
+ ret = regmap_write(data->regmap, AF8133J_REG_RANGE, range);
+ if (ret == 0)
+ data->range = range;
+
+ return ret;
+}
+
+static int af8133j_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct af8133j_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&data->mutex);
+ ret = af8133j_set_scale(data, val, val2);
+ mutex_unlock(&data->mutex);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int af8133j_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+static const struct iio_info af8133j_info = {
+ .read_raw = af8133j_read_raw,
+ .read_avail = af8133j_read_avail,
+ .write_raw = af8133j_write_raw,
+ .write_raw_get_fmt = af8133j_write_raw_get_fmt,
+};
+
+static irqreturn_t af8133j_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct af8133j_data *data = iio_priv(indio_dev);
+ s64 timestamp = iio_get_time_ns(indio_dev);
+ struct {
+ __le16 values[3];
+ s64 timestamp __aligned(8);
+ } sample;
+ int ret;
+
+ memset(&sample, 0, sizeof(sample));
+
+ ret = af8133j_read_measurement(data, sample.values);
+ if (ret == 0)
+ iio_push_to_buffers_with_timestamp(indio_dev, &sample, timestamp);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static const struct regmap_config af8133j_regmap_config = {
+ .name = "af8133j_regmap",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = AF8133J_REG_SWR,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int af8133j_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct af8133j_data *data;
+ struct iio_dev *indio_dev;
+ struct regmap *regmap;
+ int ret, i;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ regmap = devm_regmap_init_i2c(client, &af8133j_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "regmap initialization failed\n");
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+ data->regmap = regmap;
+ data->range = AF8133J_REG_RANGE_12G;
+ mutex_init(&data->mutex);
+
+ data->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(data->reset_gpiod))
+ return dev_err_probe(dev, PTR_ERR(data->reset_gpiod),
+ "Failed to get reset gpio\n");
+
+ for (i = 0; i < AF8133J_NUM_SUPPLIES; i++)
+ data->supplies[i].supply = af8133j_supply_names[i];
+ ret = devm_regulator_bulk_get(dev, AF8133J_NUM_SUPPLIES, data->supplies);
+ if (ret)
+ return ret;
+
+ ret = iio_read_mount_matrix(dev, &data->orientation);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read mount matrix\n");
+
+ ret = af8133j_power_up(data);
+ if (ret)
+ return ret;
+
+ ret = af8133j_reset(data);
+ if (ret) {
+ af8133j_power_down(data);
+ return ret;
+ }
+
+ ret = af8133j_product_check(data);
+ if (ret) {
+ af8133j_power_down(data);
+ return ret;
+ }
+
+ af8133j_power_down(data);
+
+ indio_dev->info = &af8133j_info;
+ indio_dev->name = AF8133J_DRV_NAME;
+ indio_dev->channels = af8133j_channels;
+ indio_dev->num_channels = ARRAY_SIZE(af8133j_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+ &af8133j_trigger_handler, NULL);
+ if (ret < 0)
+ return dev_err_probe(&client->dev, ret,
+ "failed to setup iio triggered buffer\n");
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to register iio device");
+
+ pm_runtime_set_autosuspend_delay(dev, 500);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static void af8133j_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct af8133j_data *data = iio_priv(indio_dev);
+ struct device *dev = &data->client->dev;
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+
+ af8133j_power_down(data);
+}
+
+static int __maybe_unused af8133j_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct af8133j_data *data = iio_priv(indio_dev);
+
+ af8133j_power_down(data);
+
+ return 0;
+}
+
+static int __maybe_unused af8133j_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct af8133j_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = af8133j_power_up(data);
+ if (ret)
+ return ret;
+
+ ret = af8133j_reset(data);
+ if (ret) {
+ af8133j_power_down(data);
+ return ret;
+ }
+
+ return 0;
+}
+
+const struct dev_pm_ops af8133j_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(af8133j_runtime_suspend, af8133j_runtime_resume, NULL)
+};
+
+static const struct of_device_id af8133j_of_match[] = {
+ { .compatible = "voltafield,af8133j", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, af8133j_of_match);
+
+static const struct i2c_device_id af8133j_id[] = {
+ { "af8133j", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, af8133j_id);
+
+static struct i2c_driver af8133j_driver = {
+ .driver = {
+ .name = AF8133J_DRV_NAME,
+ .of_match_table = af8133j_of_match,
+ .pm = &af8133j_pm_ops,
+ },
+ .probe = af8133j_probe,
+ .remove = af8133j_remove,
+ .id_table = af8133j_id,
+};
+
+module_i2c_driver(af8133j_driver);
+
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_AUTHOR("Ondřej Jirman <megi@xff.cz>");
+MODULE_DESCRIPTION("Voltafield AF8133J magnetic sensor driver");
+MODULE_LICENSE("GPL");