[v5,5/5] selftests/resctrl: Add non-contiguous CBMs CAT test
Commit Message
Add tests for both L2 and L3 CAT to verify the return values
generated by writing non-contiguous CBMs don't contradict the
reported non-contiguous support information.
Use a logical XOR to confirm return value of write_schemata() and
non-contiguous CBMs support information match.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
---
Changelog v5:
- Add Reinette's reviewed-by tag.
- Make 0xf UL in case the CBMs get bigger in the future. (Ilpo)
Changelog v4:
- Return failure instead of error on check of cpuid against sparse_masks
and on contiguous write_schemata fail. (Reinette)
Changelog v3:
- Roll back __cpuid_count part. (Reinette)
- Update function name to read sparse_masks file.
- Roll back get_cache_level() changes.
- Add ksft_print_msg() to contiguous schemata write error handling
(Reinette).
Changelog v2:
- Redo the patch message. (Ilpo)
- Tidy up __cpuid_count calls. (Ilpo)
- Remove redundant AND in noncont_mask calculations (Ilpo)
- Fix bit_center offset.
- Add newline before function return. (Ilpo)
- Group non-contiguous tests with CAT tests. (Ilpo)
- Use a helper for reading sparse_masks file. (Ilpo)
- Make get_cache_level() available in other source files. (Ilpo)
tools/testing/selftests/resctrl/cat_test.c | 81 +++++++++++++++++++
tools/testing/selftests/resctrl/resctrl.h | 2 +
.../testing/selftests/resctrl/resctrl_tests.c | 2 +
3 files changed, 85 insertions(+)
Comments
On Fri, 9 Feb 2024, Maciej Wieczor-Retman wrote:
> Add tests for both L2 and L3 CAT to verify the return values
> generated by writing non-contiguous CBMs don't contradict the
> reported non-contiguous support information.
>
> Use a logical XOR to confirm return value of write_schemata() and
> non-contiguous CBMs support information match.
>
> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Hi Maciej,
On 2/9/2024 6:02 AM, Maciej Wieczor-Retman wrote:
..
> diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
> index 39fc9303b8e8..d4b7bf8a6780 100644
> --- a/tools/testing/selftests/resctrl/cat_test.c
> +++ b/tools/testing/selftests/resctrl/cat_test.c
> @@ -294,6 +294,71 @@ static int cat_run_test(const struct resctrl_test *test, const struct user_param
> return ret;
> }
>
> +static int noncont_cat_run_test(const struct resctrl_test *test,
> + const struct user_params *uparams)
> +{
> + unsigned long full_cache_mask, cont_mask, noncont_mask;
> + unsigned int eax, ebx, ecx, edx, ret, sparse_masks;
I missed that "ret" is "unsigned int" while the test expects it to
be signed ("if (ret < 0)") and it is used to have return value of functions
that return < 0 on error.
> + char schemata[64];
> + int bit_center;
> +
> + /* Check to compare sparse_masks content to CPUID output. */
> + ret = resource_info_unsigned_get(test->resource, "sparse_masks", &sparse_masks);
> + if (ret)
> + return ret;
> +
> + if (!strcmp(test->resource, "L3"))
> + __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
> + else if (!strcmp(test->resource, "L2"))
> + __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
> + else
> + return -EINVAL;
> +
> + if (sparse_masks != ((ecx >> 3) & 1)) {
> + ksft_print_msg("CPUID output doesn't match 'sparse_masks' file content!\n");
> + return 1;
> + }
> +
> + /* Write checks initialization. */
> + ret = get_full_cbm(test->resource, &full_cache_mask);
> + if (ret < 0)
> + return ret;
> + bit_center = count_bits(full_cache_mask) / 2;
It would be nice if no new static check issues are introduced into the
resctrl selftests. I did a quick check and this is a problematic portion.
We know that the full_cache_mask cannot have zero bits but it is not
obvious to the checkers, thus thinking that bit_center may be zero
resulting in a bit shift of "-2" bits attempt later on. Could you please
add some error checking to ensure expected values to avoid extra noise from
checkers when this code lands upstream?
Thank you
Reinette
Hello!
On 2024-02-09 at 09:21:16 -0800, Reinette Chatre wrote:
>Hi Maciej,
>
>On 2/9/2024 6:02 AM, Maciej Wieczor-Retman wrote:
>
>...
>
>> diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
>> index 39fc9303b8e8..d4b7bf8a6780 100644
>> --- a/tools/testing/selftests/resctrl/cat_test.c
>> +++ b/tools/testing/selftests/resctrl/cat_test.c
>> @@ -294,6 +294,71 @@ static int cat_run_test(const struct resctrl_test *test, const struct user_param
>> return ret;
>> }
>>
>> +static int noncont_cat_run_test(const struct resctrl_test *test,
>> + const struct user_params *uparams)
>> +{
>> + unsigned long full_cache_mask, cont_mask, noncont_mask;
>> + unsigned int eax, ebx, ecx, edx, ret, sparse_masks;
>
>I missed that "ret" is "unsigned int" while the test expects it to
>be signed ("if (ret < 0)") and it is used to have return value of functions
>that return < 0 on error.
>
Oh, sorry, I'll fix that.
>
>> + char schemata[64];
>> + int bit_center;
>> +
>> + /* Check to compare sparse_masks content to CPUID output. */
>> + ret = resource_info_unsigned_get(test->resource, "sparse_masks", &sparse_masks);
>> + if (ret)
>> + return ret;
>> +
>> + if (!strcmp(test->resource, "L3"))
>> + __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
>> + else if (!strcmp(test->resource, "L2"))
>> + __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
>> + else
>> + return -EINVAL;
>> +
>> + if (sparse_masks != ((ecx >> 3) & 1)) {
>> + ksft_print_msg("CPUID output doesn't match 'sparse_masks' file content!\n");
>> + return 1;
>> + }
>> +
>> + /* Write checks initialization. */
>> + ret = get_full_cbm(test->resource, &full_cache_mask);
>> + if (ret < 0)
>> + return ret;
>> + bit_center = count_bits(full_cache_mask) / 2;
>
>It would be nice if no new static check issues are introduced into the
>resctrl selftests. I did a quick check and this is a problematic portion.
>We know that the full_cache_mask cannot have zero bits but it is not
>obvious to the checkers, thus thinking that bit_center may be zero
>resulting in a bit shift of "-2" bits attempt later on. Could you please
>add some error checking to ensure expected values to avoid extra noise from
>checkers when this code lands upstream?
>
>Thank you
Sure, I guess I could make the check 'if (bit_center < 3)' to also check if the
full_cache_mask isn't too short for some reason (since later 2 is substracted
from bit_center for the 'hole' bit shift).
Or would this need some comment as well (why exactly the '3' is there, maybe
write something about about the minimal full_cache_mask length for this test)?
>
>Reinette
>
Hi Maciej,
On 2/11/2024 11:38 PM, Maciej Wieczor-Retman wrote:
> Sure, I guess I could make the check 'if (bit_center < 3)' to also check if the
> full_cache_mask isn't too short for some reason (since later 2 is substracted
> from bit_center for the 'hole' bit shift).
Thank you.
> Or would this need some comment as well (why exactly the '3' is there, maybe
> write something about about the minimal full_cache_mask length for this test)?
The use of "Or" and "as well" makes it unclear what you propose. I do
think the check in addition to a comment will be helpful.
Thank you.
Reinette
@@ -294,6 +294,71 @@ static int cat_run_test(const struct resctrl_test *test, const struct user_param
return ret;
}
+static int noncont_cat_run_test(const struct resctrl_test *test,
+ const struct user_params *uparams)
+{
+ unsigned long full_cache_mask, cont_mask, noncont_mask;
+ unsigned int eax, ebx, ecx, edx, ret, sparse_masks;
+ char schemata[64];
+ int bit_center;
+
+ /* Check to compare sparse_masks content to CPUID output. */
+ ret = resource_info_unsigned_get(test->resource, "sparse_masks", &sparse_masks);
+ if (ret)
+ return ret;
+
+ if (!strcmp(test->resource, "L3"))
+ __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
+ else if (!strcmp(test->resource, "L2"))
+ __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
+ else
+ return -EINVAL;
+
+ if (sparse_masks != ((ecx >> 3) & 1)) {
+ ksft_print_msg("CPUID output doesn't match 'sparse_masks' file content!\n");
+ return 1;
+ }
+
+ /* Write checks initialization. */
+ ret = get_full_cbm(test->resource, &full_cache_mask);
+ if (ret < 0)
+ return ret;
+ bit_center = count_bits(full_cache_mask) / 2;
+ cont_mask = full_cache_mask >> bit_center;
+
+ /* Contiguous mask write check. */
+ snprintf(schemata, sizeof(schemata), "%lx", cont_mask);
+ ret = write_schemata("", schemata, uparams->cpu, test->resource);
+ if (ret) {
+ ksft_print_msg("Write of contiguous CBM failed\n");
+ return 1;
+ }
+
+ /*
+ * Non-contiguous mask write check. CBM has a 0xf hole approximately in the middle.
+ * Output is compared with support information to catch any edge case errors.
+ */
+ noncont_mask = ~(0xfUL << (bit_center - 2)) & full_cache_mask;
+ snprintf(schemata, sizeof(schemata), "%lx", noncont_mask);
+ ret = write_schemata("", schemata, uparams->cpu, test->resource);
+ if (ret && sparse_masks)
+ ksft_print_msg("Non-contiguous CBMs supported but write of non-contiguous CBM failed\n");
+ else if (ret && !sparse_masks)
+ ksft_print_msg("Non-contiguous CBMs not supported and write of non-contiguous CBM failed as expected\n");
+ else if (!ret && !sparse_masks)
+ ksft_print_msg("Non-contiguous CBMs not supported but write of non-contiguous CBM succeeded\n");
+
+ return !ret == !sparse_masks;
+}
+
+static bool noncont_cat_feature_check(const struct resctrl_test *test)
+{
+ if (!resctrl_resource_exists(test->resource))
+ return false;
+
+ return resource_info_file_exists(test->resource, "sparse_masks");
+}
+
struct resctrl_test l3_cat_test = {
.name = "L3_CAT",
.group = "CAT",
@@ -301,3 +366,19 @@ struct resctrl_test l3_cat_test = {
.feature_check = test_resource_feature_check,
.run_test = cat_run_test,
};
+
+struct resctrl_test l3_noncont_cat_test = {
+ .name = "L3_NONCONT_CAT",
+ .group = "CAT",
+ .resource = "L3",
+ .feature_check = noncont_cat_feature_check,
+ .run_test = noncont_cat_run_test,
+};
+
+struct resctrl_test l2_noncont_cat_test = {
+ .name = "L2_NONCONT_CAT",
+ .group = "CAT",
+ .resource = "L2",
+ .feature_check = noncont_cat_feature_check,
+ .run_test = noncont_cat_run_test,
+};
@@ -209,5 +209,7 @@ extern struct resctrl_test mbm_test;
extern struct resctrl_test mba_test;
extern struct resctrl_test cmt_test;
extern struct resctrl_test l3_cat_test;
+extern struct resctrl_test l3_noncont_cat_test;
+extern struct resctrl_test l2_noncont_cat_test;
#endif /* RESCTRL_H */
@@ -19,6 +19,8 @@ static struct resctrl_test *resctrl_tests[] = {
&mba_test,
&cmt_test,
&l3_cat_test,
+ &l3_noncont_cat_test,
+ &l2_noncont_cat_test,
};
static int detect_vendor(void)