arm64: dts: qcom: minor whitespace cleanup
Commit Message
The DTS code coding style expects exactly one space before '{' and
around '=' characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm4450.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8650.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
Comments
On Thu, 8 Feb 2024 at 12:54, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The DTS code coding style expects exactly one space before '{' and
> around '=' characters.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm4450.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sm8650.dtsi | 4 ++--
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 4 ++--
> 3 files changed, 5 insertions(+), 5 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On Thu, 08 Feb 2024 11:52:08 +0100, Krzysztof Kozlowski wrote:
> The DTS code coding style expects exactly one space before '{' and
> around '=' characters.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: minor whitespace cleanup
commit: 77e7257a601743a1cd67fa474288389fffa8839e
Best regards,
@@ -17,7 +17,7 @@ / {
chosen { };
- clocks{
+ clocks {
xo_board: xo-board {
compatible = "fixed-clock";
clock-frequency = <76800000>;
@@ -1233,7 +1233,7 @@ uart14: serial@898000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
clock-names = "se";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -1255,7 +1255,7 @@ uart15: serial@89c000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
clock-names = "se";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -1216,7 +1216,7 @@ uart21: serial@894000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
- interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -4793,7 +4793,7 @@ qup_uart21_default: qup-uart21-default-state {
/* TX, RX */
pins = "gpio86", "gpio87";
function = "qup2_se5";
- drive-strength= <2>;
+ drive-strength = <2>;
bias-disable;
};
};