[v3] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
Commit Message
The SC8280XP contains two additional tsens instances, providing among
other things thermal measurements for the GPU.
Add these and a GPU thermal-zone.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes in v3:
- Sorted tsens nodes by address.
- Link to v2: https://lore.kernel.org/r/20240126-sc8280xp-tsens2_3-v2-1-8504d18828de@quicinc.com
Changes in v2:
- Drop TM/SROT comments
- Remove polling delays, rely on interrupts
- Link to v1: https://lore.kernel.org/r/20240118-sc8280xp-tsens2_3-v1-1-e86bce14f6bf@quicinc.com
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 37 ++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
---
base-commit: 943b9f0ab2cfbaea148dd6ac279957eb08b96904
change-id: 20240118-sc8280xp-tsens2_3-a5fd9a48d655
Best regards,
Comments
On 7.02.2024 00:51, Bjorn Andersson wrote:
> The SC8280XP contains two additional tsens instances, providing among
> other things thermal measurements for the GPU.
>
> Add these and a GPU thermal-zone.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
[...]
>
> + gpu-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 2>;
> +
> + trips {
> + cpu-crit {
I assume you'll fix that up when applying!
Konrad
On Tue, 06 Feb 2024 15:51:11 -0800, Bjorn Andersson wrote:
> The SC8280XP contains two additional tsens instances, providing among
> other things thermal measurements for the GPU.
>
> Add these and a GPU thermal-zone.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
commit: 014bbc990e27043e2d0c152bf63f8918b9c347c2
Best regards,
@@ -4011,6 +4011,28 @@ pdc: interrupt-controller@b220000 {
interrupt-controller;
};
+ tsens2: thermal-sensor@c251000 {
+ compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c251000 0 0x1ff>,
+ <0 0x0c224000 0 0x8>;
+ #qcom,sensors = <11>;
+ interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@c252000 {
+ compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c252000 0 0x1ff>,
+ <0 0x0c225000 0 0x8>;
+ #qcom,sensors = <5>;
+ interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
@@ -5212,6 +5234,21 @@ cpu-crit {
};
};
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
mem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;