[v2] drm/panel: re-alphabetize the menu list

  A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Aradhya Bhatia <a-bhatia1@ti.com>
---
v2: rebase, move more driver entries around

Aradhya Bhatia <a-bhatia1@ti.com> had responded with Reviewed-by:
for v1, but I mode quite a few additions in v2 so I didn't include
that R-B: here.

 drivers/gpu/drm/panel/Kconfig |  202 ++++++++++++++++----------------
 1 file changed, 101 insertions(+), 101 deletions(-)
  

On 05/02/2024 07:27, Randy Dunlap wrote:
> A few of the DRM_PANEL entries have become out of alphabetical order,
> so move them around a bit to restore alpha order.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Aradhya Bhatia <a-bhatia1@ti.com>
> ---
> v2: rebase, move more driver entries around
> 
> Aradhya Bhatia <a-bhatia1@ti.com> had responded with Reviewed-by:
> for v1, but I mode quite a few additions in v2 so I didn't include
> that R-B: here.
> 
>   drivers/gpu/drm/panel/Kconfig |  202 ++++++++++++++++----------------
>   1 file changed, 101 insertions(+), 101 deletions(-)
> 
> diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -76,53 +76,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6
>   	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
>   	  45NA WUXGA PANEL DSI Video Mode panel
>   
> -config DRM_PANEL_DSI_CM
> -	tristate "Generic DSI command mode panels"
> -	depends on OF
> -	depends on DRM_MIPI_DSI
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	help
> -	  DRM panel driver for DSI command mode panels with support for
> -	  embedded and external backlights.
> -
> -config DRM_PANEL_LVDS
> -	tristate "Generic LVDS panel driver"
> -	depends on OF
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	select VIDEOMODE_HELPERS
> -	help
> -	  This driver supports LVDS panels that don't require device-specific
> -	  handling of power supplies or control signals. It implements automatic
> -	  backlight handling if the panel is attached to a backlight controller.
> -
> -config DRM_PANEL_SIMPLE
> -	tristate "support for simple panels (other than eDP ones)"
> -	depends on OF
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	depends on PM
> -	select VIDEOMODE_HELPERS
> -	help
> -	  DRM panel driver for dumb non-eDP panels that need at most a regulator
> -	  and a GPIO to be powered up. Optionally a backlight can be attached so
> -	  that it can be automatically turned off when the panel goes into a
> -	  low power state.
> -
> -config DRM_PANEL_EDP
> -	tristate "support for simple Embedded DisplayPort panels"
> -	depends on OF
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	depends on PM
> -	select VIDEOMODE_HELPERS
> -	select DRM_DISPLAY_DP_HELPER
> -	select DRM_DISPLAY_HELPER
> -	select DRM_DP_AUX_BUS
> -	select DRM_KMS_HELPER
> -	help
> -	  DRM panel driver for dumb eDP panels that need at most a regulator and
> -	  a GPIO to be powered up. Optionally a backlight can be attached so
> -	  that it can be automatically turned off when the panel goes into a
> -	  low power state.
> -
>   config DRM_PANEL_EBBG_FT8719
>   	tristate "EBBG FT8719 panel driver"
>   	depends on OF
> @@ -162,6 +115,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
>   	  Say Y if you want to enable support for panels based on the
>   	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
>   
> +config DRM_PANEL_DSI_CM
> +	tristate "Generic DSI command mode panels"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  DRM panel driver for DSI command mode panels with support for
> +	  embedded and external backlights.
> +
> +config DRM_PANEL_LVDS
> +	tristate "Generic LVDS panel driver"
> +	depends on OF
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	select VIDEOMODE_HELPERS
> +	help
> +	  This driver supports LVDS panels that don't require device-specific
> +	  handling of power supplies or control signals. It implements automatic
> +	  backlight handling if the panel is attached to a backlight controller.
> +
>   config DRM_PANEL_HIMAX_HX8394
>   	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
>   	depends on OF
> @@ -251,17 +223,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3
>   	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
>   	  800RGBx1280 dots at maximum.
>   
> -config DRM_PANEL_JDI_LT070ME05000
> -	tristate "JDI LT070ME05000 WUXGA DSI panel"
> -	depends on OF
> -	depends on DRM_MIPI_DSI
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	help
> -	  Say Y here if you want to enable support for JDI DSI video mode
> -	  panel as found in Google Nexus 7 (2013) devices.
> -	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
> -	  24 bit per pixel.
> -
>   config DRM_PANEL_JDI_LPM102A188A
>   	tristate "JDI LPM102A188A DSI panel"
>   	depends on OF && GPIOLIB
> @@ -273,6 +234,17 @@ config DRM_PANEL_JDI_LPM102A188A
>   	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
>   	  to the host.
>   
> +config DRM_PANEL_JDI_LT070ME05000
> +	tristate "JDI LT070ME05000 WUXGA DSI panel"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y here if you want to enable support for JDI DSI video mode
> +	  panel as found in Google Nexus 7 (2013) devices.
> +	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
> +	  24 bit per pixel.
> +
>   config DRM_PANEL_JDI_R63452
>   	tristate "JDI R63452 Full HD DSI panel"
>   	depends on OF
> @@ -326,12 +298,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
>   	  24 bit RGB per pixel. It provides a MIPI DSI interface to
>   	  the host and has a built-in LED backlight.
>   
> -config DRM_PANEL_SAMSUNG_LD9040
> -	tristate "Samsung LD9040 RGB/SPI panel"
> -	depends on OF && SPI
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	select VIDEOMODE_HELPERS
> -
>   config DRM_PANEL_LG_LB035Q02
>   	tristate "LG LB035Q024573 RGB panel"
>   	depends on GPIOLIB && OF && SPI
> @@ -359,6 +325,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
>   	  with the Magnachip D53E6EA8966 panel IC. This panel receives
>   	  video data via DSI but commands via 9-bit SPI using DBI.
>   
> +config DRM_PANEL_MANTIX_MLAF057WE51
> +	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y here if you want to enable support for the Mantix
> +	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
> +	  has a resolution of 720x1440 pixels, a built in backlight and touch
> +	  controller.
> +
>   config DRM_PANEL_NEC_NL8048HL11
>   	tristate "NEC NL8048HL11 RGB panel"
>   	depends on GPIOLIB && OF && SPI
> @@ -447,17 +424,6 @@ config DRM_PANEL_NOVATEK_NT39016
>   	  Say Y here if you want to enable support for the panels built
>   	  around the Novatek NT39016 display controller.
>   
> -config DRM_PANEL_MANTIX_MLAF057WE51
> -	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
> -	depends on OF
> -	depends on DRM_MIPI_DSI
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	help
> -	  Say Y here if you want to enable support for the Mantix
> -	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
> -	  has a resolution of 720x1440 pixels, a built in backlight and touch
> -	  controller.
> -
>   config DRM_PANEL_OLIMEX_LCD_OLINUXINO
>   	tristate "Olimex LCD-OLinuXino panel"
>   	depends on OF
> @@ -554,6 +520,12 @@ config DRM_PANEL_RONBO_RB070D30
>   	  Say Y here if you want to enable support for Ronbo Electronics
>   	  RB070D30 1024x600 DSI panel.
>   
> +config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
> +	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
> +	depends on OF
> +	select DRM_MIPI_DSI
> +	select VIDEOMODE_HELPERS
> +
>   config DRM_PANEL_SAMSUNG_ATNA33XC20
>   	tristate "Samsung ATNA33XC20 eDP panel"
>   	depends on OF
> @@ -577,6 +549,12 @@ config DRM_PANEL_SAMSUNG_DB7430
>   	  DB7430 DPI display controller used in such devices as the
>   	  LMS397KF04 480x800 DPI panel.
>   
> +config DRM_PANEL_SAMSUNG_LD9040
> +	tristate "Samsung LD9040 RGB/SPI panel"
> +	depends on OF && SPI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	select VIDEOMODE_HELPERS
> +
>   config DRM_PANEL_SAMSUNG_S6D16D0
>   	tristate "Samsung S6D16D0 DSI video mode panel"
>   	depends on OF
> @@ -642,12 +620,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI
>   	  Say Y here if you want to be able to access the Samsung
>   	  S6E63M0 panel using DSI.
>   
> -config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
> -	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
> -	depends on OF
> -	select DRM_MIPI_DSI
> -	select VIDEOMODE_HELPERS
> -
>   config DRM_PANEL_SAMSUNG_S6E8AA0
>   	tristate "Samsung S6E8AA0 DSI video mode panel"
>   	depends on OF
> @@ -746,15 +718,6 @@ config DRM_PANEL_SITRONIX_ST7789V
>   	  Say Y here if you want to enable support for the Sitronix
>   	  ST7789V controller for 240x320 LCD panels
>   
> -config DRM_PANEL_SYNAPTICS_R63353
> -	tristate "Synaptics R63353-based panels"
> -	depends on OF
> -	depends on DRM_MIPI_DSI
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	help
> -	  Say Y if you want to enable support for panels based on the
> -	  Synaptics R63353 controller.
> -
>   config DRM_PANEL_SONY_ACX565AKM
>   	tristate "Sony ACX565AKM panel"
>   	depends on GPIOLIB && OF && SPI
> @@ -794,6 +757,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015
>   	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
>   	  the host, a built-in LED backlight and touch controller.
>   
> +config DRM_PANEL_EDP
> +	tristate "support for simple Embedded DisplayPort panels"
> +	depends on OF
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	depends on PM
> +	select VIDEOMODE_HELPERS
> +	select DRM_DISPLAY_DP_HELPER
> +	select DRM_DISPLAY_HELPER
> +	select DRM_DP_AUX_BUS
> +	select DRM_KMS_HELPER
> +	help
> +	  DRM panel driver for dumb eDP panels that need at most a regulator and
> +	  a GPIO to be powered up. Optionally a backlight can be attached so
> +	  that it can be automatically turned off when the panel goes into a
> +	  low power state.
> +
> +config DRM_PANEL_SIMPLE
> +	tristate "support for simple panels (other than eDP ones)"
> +	depends on OF
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	depends on PM
> +	select VIDEOMODE_HELPERS
> +	help
> +	  DRM panel driver for dumb non-eDP panels that need at most a regulator
> +	  and a GPIO to be powered up. Optionally a backlight can be attached so
> +	  that it can be automatically turned off when the panel goes into a
> +	  low power state.
> +
> +config DRM_PANEL_SYNAPTICS_R63353
> +	tristate "Synaptics R63353-based panels"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y if you want to enable support for panels based on the
> +	  Synaptics R63353 controller.
> +
>   config DRM_PANEL_TDO_TL070WSH30
>   	tristate "TDO TL070WSH30 DSI panel"
>   	depends on OF
> @@ -837,6 +837,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
>   	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
>   	  Video Mode panel
>   
> +config DRM_PANEL_VISIONOX_R66451
> +	tristate "Visionox R66451"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	select DRM_DISPLAY_DP_HELPER
> +	select DRM_DISPLAY_HELPER
> +	help
> +	  Say Y here if you want to enable support for Visionox
> +	  R66451 1080x2340 AMOLED DSI panel.
> +
>   config DRM_PANEL_VISIONOX_RM69299
>   	tristate "Visionox RM69299"
>   	depends on OF
> @@ -854,17 +865,6 @@ config DRM_PANEL_VISIONOX_VTDR6130
>   	  Say Y here if you want to enable support for Visionox
>   	  VTDR6130 1080x2400 AMOLED DSI panel.
>   
> -config DRM_PANEL_VISIONOX_R66451
> -	tristate "Visionox R66451"
> -	depends on OF
> -	depends on DRM_MIPI_DSI
> -	depends on BACKLIGHT_CLASS_DEVICE
> -	select DRM_DISPLAY_DP_HELPER
> -	select DRM_DISPLAY_HELPER
> -	help
> -	  Say Y here if you want to enable support for Visionox
> -	  R66451 1080x2340 AMOLED DSI panel.
> -
>   config DRM_PANEL_WIDECHIPS_WS2401
>   	tristate "Widechips WS2401 DPI panel driver"
>   	depends on SPI && GPIOLIB

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
  

Hi,

On Sun, 04 Feb 2024 22:27:08 -0800, Randy Dunlap wrote:
> A few of the DRM_PANEL entries have become out of alphabetical order,
> so move them around a bit to restore alpha order.
> 
> 

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[1/1] drm/panel: re-alphabetize the menu list
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=aaf7f80996834ae5e2fd46d03f6fdb852cfa9911