diff mbox series

[3/3] arm64: dts: intel: agilex5: drop "master" I3C node name suffix

Message ID 20240117075618.81932-3-krzysztof.kozlowski@linaro.org
State New
Headers
Series [1/3] dt-bindings: i3c: drop "master" node name suffix |

Commit Message

Krzysztof Kozlowski Jan. 17, 2024, 7:56 a.m. UTC 
  Following change in the I3C bindings, the "master" suffix in I3C
controller node name is discouraged (it is "controller" now) and not
accurate (if device supports also target mode).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

The change can be applied through independent trees, if the I3C bindings
change is applied.  Therefore please take it once I3C bindings is
applied.
---
 arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Dinh Nguyen Feb. 6, 2024, 3:11 a.m. UTC | #1 
On 1/17/24 01:56, Krzysztof Kozlowski wrote:
> Following change in the I3C bindings, the "master" suffix in I3C
> controller node name is discouraged (it is "controller" now) and not
> accurate (if device supports also target mode).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> The change can be applied through independent trees, if the I3C bindings
> change is applied.  Therefore please take it once I3C bindings is
> applied.
> ---
>   arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 

Applied.

Thanks,
Dinh
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index d66d425e45b7..1162978329c1 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -202,7 +202,7 @@  i2c4: i2c@10c02c00 {
 			status = "disabled";
 		};
 
-		i3c0: i3c-master@10da0000 {
+		i3c0: i3c@10da0000 {
 			compatible = "snps,dw-i3c-master-1.00a";
 			reg = <0x10da0000 0x1000>;
 			#address-cells = <3>;
@@ -212,7 +212,7 @@  i3c0: i3c-master@10da0000 {
 			status = "disabled";
 		};
 
-		i3c1: i3c-master@10da1000 {
+		i3c1: i3c@10da1000 {
 			compatible = "snps,dw-i3c-master-1.00a";
 			reg = <0x10da1000 0x1000>;
 			#address-cells = <3>;