[v2,1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
Commit Message
It adds QoS support for QNOC device and includes support for
configuring priority, priority forward disable, urgency forwarding.
This helps in priortizing the traffic originating from different
interconnect masters at NoC(Network On Chip).
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
---
drivers/interconnect/qcom/icc-rpmh.c | 161 ++++++++++++++++++++++++++-
drivers/interconnect/qcom/icc-rpmh.h | 32 ++++++
2 files changed, 189 insertions(+), 4 deletions(-)
Comments
On Mon, 5 Feb 2024 at 16:57, Odelu Kukatla <quic_okukatla@quicinc.com> wrote:
>
> It adds QoS support for QNOC device and includes support for
> configuring priority, priority forward disable, urgency forwarding.
> This helps in priortizing the traffic originating from different
> interconnect masters at NoC(Network On Chip).
>
> Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
> ---
> drivers/interconnect/qcom/icc-rpmh.c | 161 ++++++++++++++++++++++++++-
> drivers/interconnect/qcom/icc-rpmh.h | 32 ++++++
> 2 files changed, 189 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
> index c1aa265c1f4e..67e600f1191d 100644
> --- a/drivers/interconnect/qcom/icc-rpmh.c
> +++ b/drivers/interconnect/qcom/icc-rpmh.c
> @@ -1,28 +1,69 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> +#include <linux/clk.h>
> #include <linux/interconnect.h>
> #include <linux/interconnect-provider.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/slab.h>
> +#include <linux/bits.h>
>
> #include "bcm-voter.h"
> #include "icc-common.h"
> #include "icc-rpmh.h"
>
> +/* QNOC QoS */
> +#define QOSGEN_MAINCTL_LO(p, qp) (0x8 + (p->port_offsets[qp]))
> +#define QOS_SLV_URG_MSG_EN_MASK BIT_MASK(3)
> +#define QOS_DFLT_PRIO_MASK GENMASK(6, 4)
> +#define QOS_DISABLE_MASK BIT_MASK(24)
> +
> +/**
> + * qcom_icc_set_qos - initialize static QoS configurations
> + * @qp: qcom icc provider to which @node belongs
> + * @node: qcom icc node to operate on
> + */
> +static void qcom_icc_set_qos(struct qcom_icc_provider *qp,
> + struct qcom_icc_node *node)
> +{
> + const struct qcom_icc_qosbox *qos = node->qosbox;
> + int port;
> +
> + if (!qp->regmap)
> + return;
> +
> + if (!qos)
> + return;
> +
> + for (port = 0; port < qos->num_ports; port++) {
> + regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
> + QOS_DISABLE_MASK,
> + FIELD_PREP(QOS_DISABLE_MASK, qos->prio_fwd_disable));
> +
> + regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
> + QOS_DFLT_PRIO_MASK,
> + FIELD_PREP(QOS_DFLT_PRIO_MASK, qos->prio));
> +
> + regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
> + QOS_SLV_URG_MSG_EN_MASK,
> + FIELD_PREP(QOS_SLV_URG_MSG_EN_MASK, qos->urg_fwd));
> + }
> +}
> +
> /**
> * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set
> * @node: icc node to operate on
> */
> void qcom_icc_pre_aggregate(struct icc_node *node)
> {
> - size_t i;
> - struct qcom_icc_node *qn;
> struct qcom_icc_provider *qp;
> + struct qcom_icc_node *qn;
> + size_t i;
>
> qn = node->data;
> qp = to_qcom_provider(node->provider);
> @@ -49,8 +90,8 @@ EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
> int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
> u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
> {
> - size_t i;
> struct qcom_icc_node *qn;
> + size_t i;
Please abstain from making the cleanup changes in the same patch as
the functional changes. These changes either should be dropped or
moved to a separate patch.
>
> qn = node->data;
>
> @@ -159,13 +200,96 @@ int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
> }
> EXPORT_SYMBOL_GPL(qcom_icc_bcm_init);
>
> +static bool bcm_needs_qos_proxy(struct qcom_icc_bcm *bcm)
Although this part is not exported to the modules, I think it deserves
some documentation. Either in the commit message or in the source
file.
> +{
> + int i;
> +
> + for (i = 0; i < bcm->num_nodes; i++)
> + if (bcm->nodes[i]->qosbox)
> + return true;
> +
> + return false;
> +}
> +
> +static int enable_qos_deps(struct qcom_icc_provider *qp)
> +{
> + struct qcom_icc_bcm *bcm;
> + bool keepalive;
> + int ret, i;
> +
> + for (i = 0; i < qp->num_bcms; i++) {
> + bcm = qp->bcms[i];
> + if (bcm_needs_qos_proxy(bcm)) {
> + keepalive = bcm->keepalive;
> + bcm->keepalive = true;
> +
> + qcom_icc_bcm_voter_add(qp->voter, bcm);
> + ret = qcom_icc_bcm_voter_commit(qp->voter);
> +
> + bcm->keepalive = keepalive;
> +
> + if (ret) {
> + dev_err(qp->dev, "failed to vote BW to %s for QoS\n",
> + bcm->name);
> + return ret;
> + }
> + }
> + }
> +
> + ret = clk_bulk_prepare_enable(qp->num_clks, qp->clks);
> + if (ret)
> + dev_err(qp->dev, "failed to enable clocks for QoS\n");
> +
> + return ret;
> +}
> +
> +static void disable_qos_deps(struct qcom_icc_provider *qp)
> +{
> + struct qcom_icc_bcm *bcm;
> + int i;
> +
> + clk_bulk_disable_unprepare(qp->num_clks, qp->clks);
> +
> + for (i = 0; i < qp->num_bcms; i++) {
> + bcm = qp->bcms[i];
> + if (bcm_needs_qos_proxy(bcm)) {
> + qcom_icc_bcm_voter_add(qp->voter, bcm);
> + qcom_icc_bcm_voter_commit(qp->voter);
> + }
> + }
> +}
> +
> +static int qcom_icc_rpmh_configure_qos(struct qcom_icc_provider *qp)
> +{
> + struct qcom_icc_node *qnode;
> + size_t i;
> + int ret;
> +
> + ret = enable_qos_deps(qp);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < qp->num_nodes; i++) {
> + qnode = qp->nodes[i];
> + if (!qnode)
> + continue;
> +
> + if (qnode->qosbox)
> + qcom_icc_set_qos(qp, qnode);
> + }
> +
> + disable_qos_deps(qp);
> +
> + return ret;
> +}
> +
> int qcom_icc_rpmh_probe(struct platform_device *pdev)
> {
> + struct qcom_icc_node * const *qnodes, *qn;
> const struct qcom_icc_desc *desc;
> struct device *dev = &pdev->dev;
> struct icc_onecell_data *data;
> struct icc_provider *provider;
> - struct qcom_icc_node * const *qnodes, *qn;
> struct qcom_icc_provider *qp;
> struct icc_node *node;
> size_t num_nodes, i, j;
> @@ -199,12 +323,35 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
>
> qp->dev = dev;
> qp->bcms = desc->bcms;
> + qp->nodes = desc->nodes;
> qp->num_bcms = desc->num_bcms;
> + qp->num_nodes = desc->num_nodes;
>
> qp->voter = of_bcm_voter_get(qp->dev, NULL);
> if (IS_ERR(qp->voter))
> return PTR_ERR(qp->voter);
>
> + if (desc->config) {
> + struct resource *res;
> + void __iomem *base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -ENODEV;
Having a working ICC even without QoS changes is still important. I'd
suggest to warn the user here and continue probe, skipping QoS
settings.
> +
> + base = devm_ioremap(dev, res->start, resource_size(res));
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + qp->regmap = devm_regmap_init_mmio(dev, base, desc->config);
> + if (IS_ERR(qp->regmap))
> + return PTR_ERR(qp->regmap);
> + }
> +
> + qp->num_clks = devm_clk_bulk_get_all(qp->dev, &qp->clks);
> + if (qp->num_clks < 0)
> + return qp->num_clks;
> +
> for (i = 0; i < qp->num_bcms; i++)
> qcom_icc_bcm_init(qp->bcms[i], dev);
>
> @@ -229,6 +376,10 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
> data->nodes[i] = node;
> }
>
> + ret = qcom_icc_rpmh_configure_qos(qp);
> + if (ret)
> + goto err_remove_nodes;
> +
> ret = icc_provider_register(provider);
> if (ret)
> goto err_remove_nodes;
> @@ -247,6 +398,7 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
> err_deregister_provider:
> icc_provider_deregister(provider);
> err_remove_nodes:
> + clk_bulk_put_all(qp->num_clks, qp->clks);
No!!! You should never manually free the resources that are handled by
the devm_ functions. In rare cases it is really necessary for some
reason, there exists a counterpart devm_free_something funciton.
> icc_nodes_remove(provider);
>
> return ret;
> @@ -258,6 +410,7 @@ void qcom_icc_rpmh_remove(struct platform_device *pdev)
> struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
>
> icc_provider_deregister(&qp->provider);
> + clk_bulk_put_all(qp->num_clks, qp->clks);
And here again.
> icc_nodes_remove(&qp->provider);
> }
> EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove);
> diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
> index 2de29460e808..65cef156f212 100644
> --- a/drivers/interconnect/qcom/icc-rpmh.h
> +++ b/drivers/interconnect/qcom/icc-rpmh.h
> @@ -1,12 +1,14 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> /*
> * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
> #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
>
> #include <dt-bindings/interconnect/qcom,icc.h>
> +#include <linux/regmap.h>
>
> #define to_qcom_provider(_provider) \
> container_of(_provider, struct qcom_icc_provider, provider)
> @@ -18,6 +20,11 @@
> * @bcms: list of bcms that maps to the provider
> * @num_bcms: number of @bcms
> * @voter: bcm voter targeted by this provider
> + * @nodes: list of icc nodes that maps to the provider
> + * @num_nodes: number of @nodes
> + * @regmap: used for QoS, register access
> + * @clks : clks required for register access
> + * @num_clks: number of @clks
> */
> struct qcom_icc_provider {
> struct icc_provider provider;
> @@ -25,6 +32,11 @@ struct qcom_icc_provider {
> struct qcom_icc_bcm * const *bcms;
> size_t num_bcms;
> struct bcm_voter *voter;
> + struct qcom_icc_node * const *nodes;
> + size_t num_nodes;
> + struct regmap *regmap;
> + struct clk_bulk_data *clks;
> + int num_clks;
Is it really necessary to store this in the global data? If I
understand correctly, QoS is only programmed during the boot and is
not to be reprogrammed later. Is my understanding correct?
> };
>
> /**
> @@ -41,6 +53,23 @@ struct bcm_db {
> u8 reserved;
> };
>
> +/**
> + * struct qcom_icc_qosbox - Qualcomm specific QoS config
Why is it qosbox?
> + * @prio: priority value assigned to requests on the node
> + * @urg_fwd: if set, master priority is used for requests.
> + * @prio_fwd_disable: if set, master priority is ignored and NoC's default priority is used.
> + * @num_ports: number of @ports
> + * @port_offsets: qos register offsets
> + */
> +
> +struct qcom_icc_qosbox {
> + const u32 prio;
> + const bool urg_fwd;
> + const bool prio_fwd_disable;
> + const u32 num_ports;
> + const u32 port_offsets[] __counted_by(num_ports);
> +};
> +
> #define MAX_LINKS 128
> #define MAX_BCMS 64
> #define MAX_BCM_PER_NODE 3
> @@ -58,6 +87,7 @@ struct bcm_db {
> * @max_peak: current max aggregate value of all peak bw requests
> * @bcms: list of bcms associated with this logical node
> * @num_bcms: num of @bcms
> + * @qosbox: qos config data associated with node
> */
> struct qcom_icc_node {
> const char *name;
> @@ -70,6 +100,7 @@ struct qcom_icc_node {
> u64 max_peak[QCOM_ICC_NUM_BUCKETS];
> struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE];
> size_t num_bcms;
> + const struct qcom_icc_qosbox *qosbox;
> };
>
> /**
> @@ -114,6 +145,7 @@ struct qcom_icc_fabric {
> };
>
> struct qcom_icc_desc {
> + const struct regmap_config *config;
> struct qcom_icc_node * const *nodes;
> size_t num_nodes;
> struct qcom_icc_bcm * const *bcms;
> --
> 2.17.1
>
>
Hi Odelu,
kernel test robot noticed the following build errors:
[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.8-rc3 next-20240205]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Odelu-Kukatla/interconnect-qcom-icc-rpmh-Add-QoS-configuration-support/20240205-230208
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link: https://lore.kernel.org/r/20240205145606.16936-2-quic_okukatla%40quicinc.com
patch subject: [PATCH v2 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
config: arm-allmodconfig (https://download.01.org/0day-ci/archive/20240206/202402061541.oNi4V6C6-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240206/202402061541.oNi4V6C6-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202402061541.oNi4V6C6-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/interconnect/qcom/icc-rpmh.c: In function 'qcom_icc_set_qos':
>> drivers/interconnect/qcom/icc-rpmh.c:46:36: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
46 | FIELD_PREP(QOS_DISABLE_MASK, qos->prio_fwd_disable));
| ^~~~~~~~~~
cc1: some warnings being treated as errors
vim +/FIELD_PREP +46 drivers/interconnect/qcom/icc-rpmh.c
25
26 /**
27 * qcom_icc_set_qos - initialize static QoS configurations
28 * @qp: qcom icc provider to which @node belongs
29 * @node: qcom icc node to operate on
30 */
31 static void qcom_icc_set_qos(struct qcom_icc_provider *qp,
32 struct qcom_icc_node *node)
33 {
34 const struct qcom_icc_qosbox *qos = node->qosbox;
35 int port;
36
37 if (!qp->regmap)
38 return;
39
40 if (!qos)
41 return;
42
43 for (port = 0; port < qos->num_ports; port++) {
44 regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
45 QOS_DISABLE_MASK,
> 46 FIELD_PREP(QOS_DISABLE_MASK, qos->prio_fwd_disable));
47
48 regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
49 QOS_DFLT_PRIO_MASK,
50 FIELD_PREP(QOS_DFLT_PRIO_MASK, qos->prio));
51
52 regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
53 QOS_SLV_URG_MSG_EN_MASK,
54 FIELD_PREP(QOS_SLV_URG_MSG_EN_MASK, qos->urg_fwd));
55 }
56 }
57
On 2/5/2024 8:38 PM, Dmitry Baryshkov wrote:
> On Mon, 5 Feb 2024 at 16:57, Odelu Kukatla <quic_okukatla@quicinc.com> wrote:
>>
>> It adds QoS support for QNOC device and includes support for
>> configuring priority, priority forward disable, urgency forwarding.
>> This helps in priortizing the traffic originating from different
>> interconnect masters at NoC(Network On Chip).
>>
>> Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
>> ---
>> drivers/interconnect/qcom/icc-rpmh.c | 161 ++++++++++++++++++++++++++-
>> drivers/interconnect/qcom/icc-rpmh.h | 32 ++++++
>> 2 files changed, 189 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
>> index c1aa265c1f4e..67e600f1191d 100644
>> --- a/drivers/interconnect/qcom/icc-rpmh.c
>> +++ b/drivers/interconnect/qcom/icc-rpmh.c
>> @@ -1,28 +1,69 @@
>> // SPDX-License-Identifier: GPL-2.0
>> /*
>> * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> */
>>
>> +#include <linux/clk.h>
>> #include <linux/interconnect.h>
>> #include <linux/interconnect-provider.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> #include <linux/of_platform.h>
>> #include <linux/slab.h>
>> +#include <linux/bits.h>
>>
>> #include "bcm-voter.h"
>> #include "icc-common.h"
>> #include "icc-rpmh.h"
>>
>> +/* QNOC QoS */
>> +#define QOSGEN_MAINCTL_LO(p, qp) (0x8 + (p->port_offsets[qp]))
>> +#define QOS_SLV_URG_MSG_EN_MASK BIT_MASK(3)
>> +#define QOS_DFLT_PRIO_MASK GENMASK(6, 4)
>> +#define QOS_DISABLE_MASK BIT_MASK(24)
>> +
>> +/**
>> + * qcom_icc_set_qos - initialize static QoS configurations
>> + * @qp: qcom icc provider to which @node belongs
>> + * @node: qcom icc node to operate on
>> + */
>> +static void qcom_icc_set_qos(struct qcom_icc_provider *qp,
>> + struct qcom_icc_node *node)
>> +{
>> + const struct qcom_icc_qosbox *qos = node->qosbox;
>> + int port;
>> +
>> + if (!qp->regmap)
>> + return;
>> +
>> + if (!qos)
>> + return;
>> +
>> + for (port = 0; port < qos->num_ports; port++) {
>> + regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
>> + QOS_DISABLE_MASK,
>> + FIELD_PREP(QOS_DISABLE_MASK, qos->prio_fwd_disable));
>> +
>> + regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
>> + QOS_DFLT_PRIO_MASK,
>> + FIELD_PREP(QOS_DFLT_PRIO_MASK, qos->prio));
>> +
>> + regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
>> + QOS_SLV_URG_MSG_EN_MASK,
>> + FIELD_PREP(QOS_SLV_URG_MSG_EN_MASK, qos->urg_fwd));
>> + }
>> +}
>> +
>> /**
>> * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set
>> * @node: icc node to operate on
>> */
>> void qcom_icc_pre_aggregate(struct icc_node *node)
>> {
>> - size_t i;
>> - struct qcom_icc_node *qn;
>> struct qcom_icc_provider *qp;
>> + struct qcom_icc_node *qn;
>> + size_t i;
>>
>> qn = node->data;
>> qp = to_qcom_provider(node->provider);
>> @@ -49,8 +90,8 @@ EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
>> int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
>> u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
>> {
>> - size_t i;
>> struct qcom_icc_node *qn;
>> + size_t i;
>
> Please abstain from making the cleanup changes in the same patch as
> the functional changes. These changes either should be dropped or
> moved to a separate patch.
>
Sure, i will take care of it in next revision.
>>
>> qn = node->data;
>>
>> @@ -159,13 +200,96 @@ int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
>> }
>> EXPORT_SYMBOL_GPL(qcom_icc_bcm_init);
>>
>> +static bool bcm_needs_qos_proxy(struct qcom_icc_bcm *bcm)
>
> Although this part is not exported to the modules, I think it deserves
> some documentation. Either in the commit message or in the source
> file.
>
I am going to address this in V3.
>> +{
>> + int i;
>> +
>> + for (i = 0; i < bcm->num_nodes; i++)
>> + if (bcm->nodes[i]->qosbox)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +static int enable_qos_deps(struct qcom_icc_provider *qp)
>> +{
>> + struct qcom_icc_bcm *bcm;
>> + bool keepalive;
>> + int ret, i;
>> +
>> + for (i = 0; i < qp->num_bcms; i++) {
>> + bcm = qp->bcms[i];
>> + if (bcm_needs_qos_proxy(bcm)) {
>> + keepalive = bcm->keepalive;
>> + bcm->keepalive = true;
>> +
>> + qcom_icc_bcm_voter_add(qp->voter, bcm);
>> + ret = qcom_icc_bcm_voter_commit(qp->voter);
>> +
>> + bcm->keepalive = keepalive;
>> +
>> + if (ret) {
>> + dev_err(qp->dev, "failed to vote BW to %s for QoS\n",
>> + bcm->name);
>> + return ret;
>> + }
>> + }
>> + }
>> +
>> + ret = clk_bulk_prepare_enable(qp->num_clks, qp->clks);
>> + if (ret)
>> + dev_err(qp->dev, "failed to enable clocks for QoS\n");
>> +
>> + return ret;
>> +}
>> +
>> +static void disable_qos_deps(struct qcom_icc_provider *qp)
>> +{
>> + struct qcom_icc_bcm *bcm;
>> + int i;
>> +
>> + clk_bulk_disable_unprepare(qp->num_clks, qp->clks);
>> +
>> + for (i = 0; i < qp->num_bcms; i++) {
>> + bcm = qp->bcms[i];
>> + if (bcm_needs_qos_proxy(bcm)) {
>> + qcom_icc_bcm_voter_add(qp->voter, bcm);
>> + qcom_icc_bcm_voter_commit(qp->voter);
>> + }
>> + }
>> +}
>> +
>> +static int qcom_icc_rpmh_configure_qos(struct qcom_icc_provider *qp)
>> +{
>> + struct qcom_icc_node *qnode;
>> + size_t i;
>> + int ret;
>> +
>> + ret = enable_qos_deps(qp);
>> + if (ret)
>> + return ret;
>> +
>> + for (i = 0; i < qp->num_nodes; i++) {
>> + qnode = qp->nodes[i];
>> + if (!qnode)
>> + continue;
>> +
>> + if (qnode->qosbox)
>> + qcom_icc_set_qos(qp, qnode);
>> + }
>> +
>> + disable_qos_deps(qp);
>> +
>> + return ret;
>> +}
>> +
>> int qcom_icc_rpmh_probe(struct platform_device *pdev)
>> {
>> + struct qcom_icc_node * const *qnodes, *qn;
>> const struct qcom_icc_desc *desc;
>> struct device *dev = &pdev->dev;
>> struct icc_onecell_data *data;
>> struct icc_provider *provider;
>> - struct qcom_icc_node * const *qnodes, *qn;
>> struct qcom_icc_provider *qp;
>> struct icc_node *node;
>> size_t num_nodes, i, j;
>> @@ -199,12 +323,35 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
>>
>> qp->dev = dev;
>> qp->bcms = desc->bcms;
>> + qp->nodes = desc->nodes;
>> qp->num_bcms = desc->num_bcms;
>> + qp->num_nodes = desc->num_nodes;
>>
>> qp->voter = of_bcm_voter_get(qp->dev, NULL);
>> if (IS_ERR(qp->voter))
>> return PTR_ERR(qp->voter);
>>
>> + if (desc->config) {
>> + struct resource *res;
>> + void __iomem *base;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res)
>> + return -ENODEV;
>
> Having a working ICC even without QoS changes is still important. I'd
> suggest to warn the user here and continue probe, skipping QoS
> settings.
>
I am going to address this in V3.
>> +
>> + base = devm_ioremap(dev, res->start, resource_size(res));
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> +
>> + qp->regmap = devm_regmap_init_mmio(dev, base, desc->config);
>> + if (IS_ERR(qp->regmap))
>> + return PTR_ERR(qp->regmap);
>> + }
>> +
>> + qp->num_clks = devm_clk_bulk_get_all(qp->dev, &qp->clks);
>> + if (qp->num_clks < 0)
>> + return qp->num_clks;
>> +
>> for (i = 0; i < qp->num_bcms; i++)
>> qcom_icc_bcm_init(qp->bcms[i], dev);
>>
>> @@ -229,6 +376,10 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
>> data->nodes[i] = node;
>> }
>>
>> + ret = qcom_icc_rpmh_configure_qos(qp);
>> + if (ret)
>> + goto err_remove_nodes;
>> +
>> ret = icc_provider_register(provider);
>> if (ret)
>> goto err_remove_nodes;
>> @@ -247,6 +398,7 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
>> err_deregister_provider:
>> icc_provider_deregister(provider);
>> err_remove_nodes:
>> + clk_bulk_put_all(qp->num_clks, qp->clks);
>
> No!!! You should never manually free the resources that are handled by
> the devm_ functions. In rare cases it is really necessary for some
> reason, there exists a counterpart devm_free_something funciton.
>
Yeah, i will remove it in next revision.
>> icc_nodes_remove(provider);
>>
>> return ret;
>> @@ -258,6 +410,7 @@ void qcom_icc_rpmh_remove(struct platform_device *pdev)
>> struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
>>
>> icc_provider_deregister(&qp->provider);
>> + clk_bulk_put_all(qp->num_clks, qp->clks);
>
> And here again.
>
Yeah, i will remove it in next revision.
>> icc_nodes_remove(&qp->provider);
>> }
>> EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove);
>> diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
>> index 2de29460e808..65cef156f212 100644
>> --- a/drivers/interconnect/qcom/icc-rpmh.h
>> +++ b/drivers/interconnect/qcom/icc-rpmh.h
>> @@ -1,12 +1,14 @@
>> /* SPDX-License-Identifier: GPL-2.0 */
>> /*
>> * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> */
>>
>> #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
>> #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
>>
>> #include <dt-bindings/interconnect/qcom,icc.h>
>> +#include <linux/regmap.h>
>>
>> #define to_qcom_provider(_provider) \
>> container_of(_provider, struct qcom_icc_provider, provider)
>> @@ -18,6 +20,11 @@
>> * @bcms: list of bcms that maps to the provider
>> * @num_bcms: number of @bcms
>> * @voter: bcm voter targeted by this provider
>> + * @nodes: list of icc nodes that maps to the provider
>> + * @num_nodes: number of @nodes
>> + * @regmap: used for QoS, register access
>> + * @clks : clks required for register access
>> + * @num_clks: number of @clks
>> */
>> struct qcom_icc_provider {
>> struct icc_provider provider;
>> @@ -25,6 +32,11 @@ struct qcom_icc_provider {
>> struct qcom_icc_bcm * const *bcms;
>> size_t num_bcms;
>> struct bcm_voter *voter;
>> + struct qcom_icc_node * const *nodes;
>> + size_t num_nodes;
>> + struct regmap *regmap;
>> + struct clk_bulk_data *clks;
>> + int num_clks;
>
> Is it really necessary to store this in the global data? If I
> understand correctly, QoS is only programmed during the boot and is
> not to be reprogrammed later. Is my understanding correct?
>
qcom_icc_rpmh_configure_qos() can be invoked from outside of qcom_icc_rpmh_probe() in QuickBoot mode where *_probe does not happen.
so it will be easier to access this data if we keep it in global data when invoked outside of *_probe().
>> };
>>
>> /**
>> @@ -41,6 +53,23 @@ struct bcm_db {
>> u8 reserved;
>> };
>>
>> +/**
>> + * struct qcom_icc_qosbox - Qualcomm specific QoS config
>
> Why is it qosbox?
>
QOS box is the name used to describe the QOS policy override part of NIU HW in NOC.
>> + * @prio: priority value assigned to requests on the node
>> + * @urg_fwd: if set, master priority is used for requests.
>> + * @prio_fwd_disable: if set, master priority is ignored and NoC's default priority is used.
>> + * @num_ports: number of @ports
>> + * @port_offsets: qos register offsets
>> + */
>> +
>> +struct qcom_icc_qosbox {
>> + const u32 prio;
>> + const bool urg_fwd;
>> + const bool prio_fwd_disable;
>> + const u32 num_ports;
>> + const u32 port_offsets[] __counted_by(num_ports);
>> +};
>> +
>> #define MAX_LINKS 128
>> #define MAX_BCMS 64
>> #define MAX_BCM_PER_NODE 3
>> @@ -58,6 +87,7 @@ struct bcm_db {
>> * @max_peak: current max aggregate value of all peak bw requests
>> * @bcms: list of bcms associated with this logical node
>> * @num_bcms: num of @bcms
>> + * @qosbox: qos config data associated with node
>> */
>> struct qcom_icc_node {
>> const char *name;
>> @@ -70,6 +100,7 @@ struct qcom_icc_node {
>> u64 max_peak[QCOM_ICC_NUM_BUCKETS];
>> struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE];
>> size_t num_bcms;
>> + const struct qcom_icc_qosbox *qosbox;
>> };
>>
>> /**
>> @@ -114,6 +145,7 @@ struct qcom_icc_fabric {
>> };
>>
>> struct qcom_icc_desc {
>> + const struct regmap_config *config;
>> struct qcom_icc_node * const *nodes;
>> size_t num_nodes;
>> struct qcom_icc_bcm * const *bcms;
>> --
>> 2.17.1
>>
>>
>
>
Thanks,
Odelu
@@ -1,28 +1,69 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <linux/clk.h>
#include <linux/interconnect.h>
#include <linux/interconnect-provider.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include <linux/bits.h>
#include "bcm-voter.h"
#include "icc-common.h"
#include "icc-rpmh.h"
+/* QNOC QoS */
+#define QOSGEN_MAINCTL_LO(p, qp) (0x8 + (p->port_offsets[qp]))
+#define QOS_SLV_URG_MSG_EN_MASK BIT_MASK(3)
+#define QOS_DFLT_PRIO_MASK GENMASK(6, 4)
+#define QOS_DISABLE_MASK BIT_MASK(24)
+
+/**
+ * qcom_icc_set_qos - initialize static QoS configurations
+ * @qp: qcom icc provider to which @node belongs
+ * @node: qcom icc node to operate on
+ */
+static void qcom_icc_set_qos(struct qcom_icc_provider *qp,
+ struct qcom_icc_node *node)
+{
+ const struct qcom_icc_qosbox *qos = node->qosbox;
+ int port;
+
+ if (!qp->regmap)
+ return;
+
+ if (!qos)
+ return;
+
+ for (port = 0; port < qos->num_ports; port++) {
+ regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
+ QOS_DISABLE_MASK,
+ FIELD_PREP(QOS_DISABLE_MASK, qos->prio_fwd_disable));
+
+ regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
+ QOS_DFLT_PRIO_MASK,
+ FIELD_PREP(QOS_DFLT_PRIO_MASK, qos->prio));
+
+ regmap_update_bits(qp->regmap, QOSGEN_MAINCTL_LO(qos, port),
+ QOS_SLV_URG_MSG_EN_MASK,
+ FIELD_PREP(QOS_SLV_URG_MSG_EN_MASK, qos->urg_fwd));
+ }
+}
+
/**
* qcom_icc_pre_aggregate - cleans up stale values from prior icc_set
* @node: icc node to operate on
*/
void qcom_icc_pre_aggregate(struct icc_node *node)
{
- size_t i;
- struct qcom_icc_node *qn;
struct qcom_icc_provider *qp;
+ struct qcom_icc_node *qn;
+ size_t i;
qn = node->data;
qp = to_qcom_provider(node->provider);
@@ -49,8 +90,8 @@ EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
{
- size_t i;
struct qcom_icc_node *qn;
+ size_t i;
qn = node->data;
@@ -159,13 +200,96 @@ int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
}
EXPORT_SYMBOL_GPL(qcom_icc_bcm_init);
+static bool bcm_needs_qos_proxy(struct qcom_icc_bcm *bcm)
+{
+ int i;
+
+ for (i = 0; i < bcm->num_nodes; i++)
+ if (bcm->nodes[i]->qosbox)
+ return true;
+
+ return false;
+}
+
+static int enable_qos_deps(struct qcom_icc_provider *qp)
+{
+ struct qcom_icc_bcm *bcm;
+ bool keepalive;
+ int ret, i;
+
+ for (i = 0; i < qp->num_bcms; i++) {
+ bcm = qp->bcms[i];
+ if (bcm_needs_qos_proxy(bcm)) {
+ keepalive = bcm->keepalive;
+ bcm->keepalive = true;
+
+ qcom_icc_bcm_voter_add(qp->voter, bcm);
+ ret = qcom_icc_bcm_voter_commit(qp->voter);
+
+ bcm->keepalive = keepalive;
+
+ if (ret) {
+ dev_err(qp->dev, "failed to vote BW to %s for QoS\n",
+ bcm->name);
+ return ret;
+ }
+ }
+ }
+
+ ret = clk_bulk_prepare_enable(qp->num_clks, qp->clks);
+ if (ret)
+ dev_err(qp->dev, "failed to enable clocks for QoS\n");
+
+ return ret;
+}
+
+static void disable_qos_deps(struct qcom_icc_provider *qp)
+{
+ struct qcom_icc_bcm *bcm;
+ int i;
+
+ clk_bulk_disable_unprepare(qp->num_clks, qp->clks);
+
+ for (i = 0; i < qp->num_bcms; i++) {
+ bcm = qp->bcms[i];
+ if (bcm_needs_qos_proxy(bcm)) {
+ qcom_icc_bcm_voter_add(qp->voter, bcm);
+ qcom_icc_bcm_voter_commit(qp->voter);
+ }
+ }
+}
+
+static int qcom_icc_rpmh_configure_qos(struct qcom_icc_provider *qp)
+{
+ struct qcom_icc_node *qnode;
+ size_t i;
+ int ret;
+
+ ret = enable_qos_deps(qp);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < qp->num_nodes; i++) {
+ qnode = qp->nodes[i];
+ if (!qnode)
+ continue;
+
+ if (qnode->qosbox)
+ qcom_icc_set_qos(qp, qnode);
+ }
+
+ disable_qos_deps(qp);
+
+ return ret;
+}
+
int qcom_icc_rpmh_probe(struct platform_device *pdev)
{
+ struct qcom_icc_node * const *qnodes, *qn;
const struct qcom_icc_desc *desc;
struct device *dev = &pdev->dev;
struct icc_onecell_data *data;
struct icc_provider *provider;
- struct qcom_icc_node * const *qnodes, *qn;
struct qcom_icc_provider *qp;
struct icc_node *node;
size_t num_nodes, i, j;
@@ -199,12 +323,35 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
qp->dev = dev;
qp->bcms = desc->bcms;
+ qp->nodes = desc->nodes;
qp->num_bcms = desc->num_bcms;
+ qp->num_nodes = desc->num_nodes;
qp->voter = of_bcm_voter_get(qp->dev, NULL);
if (IS_ERR(qp->voter))
return PTR_ERR(qp->voter);
+ if (desc->config) {
+ struct resource *res;
+ void __iomem *base;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ base = devm_ioremap(dev, res->start, resource_size(res));
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ qp->regmap = devm_regmap_init_mmio(dev, base, desc->config);
+ if (IS_ERR(qp->regmap))
+ return PTR_ERR(qp->regmap);
+ }
+
+ qp->num_clks = devm_clk_bulk_get_all(qp->dev, &qp->clks);
+ if (qp->num_clks < 0)
+ return qp->num_clks;
+
for (i = 0; i < qp->num_bcms; i++)
qcom_icc_bcm_init(qp->bcms[i], dev);
@@ -229,6 +376,10 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
data->nodes[i] = node;
}
+ ret = qcom_icc_rpmh_configure_qos(qp);
+ if (ret)
+ goto err_remove_nodes;
+
ret = icc_provider_register(provider);
if (ret)
goto err_remove_nodes;
@@ -247,6 +398,7 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
err_deregister_provider:
icc_provider_deregister(provider);
err_remove_nodes:
+ clk_bulk_put_all(qp->num_clks, qp->clks);
icc_nodes_remove(provider);
return ret;
@@ -258,6 +410,7 @@ void qcom_icc_rpmh_remove(struct platform_device *pdev)
struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
icc_provider_deregister(&qp->provider);
+ clk_bulk_put_all(qp->num_clks, qp->clks);
icc_nodes_remove(&qp->provider);
}
EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove);
@@ -1,12 +1,14 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
#include <dt-bindings/interconnect/qcom,icc.h>
+#include <linux/regmap.h>
#define to_qcom_provider(_provider) \
container_of(_provider, struct qcom_icc_provider, provider)
@@ -18,6 +20,11 @@
* @bcms: list of bcms that maps to the provider
* @num_bcms: number of @bcms
* @voter: bcm voter targeted by this provider
+ * @nodes: list of icc nodes that maps to the provider
+ * @num_nodes: number of @nodes
+ * @regmap: used for QoS, register access
+ * @clks : clks required for register access
+ * @num_clks: number of @clks
*/
struct qcom_icc_provider {
struct icc_provider provider;
@@ -25,6 +32,11 @@ struct qcom_icc_provider {
struct qcom_icc_bcm * const *bcms;
size_t num_bcms;
struct bcm_voter *voter;
+ struct qcom_icc_node * const *nodes;
+ size_t num_nodes;
+ struct regmap *regmap;
+ struct clk_bulk_data *clks;
+ int num_clks;
};
/**
@@ -41,6 +53,23 @@ struct bcm_db {
u8 reserved;
};
+/**
+ * struct qcom_icc_qosbox - Qualcomm specific QoS config
+ * @prio: priority value assigned to requests on the node
+ * @urg_fwd: if set, master priority is used for requests.
+ * @prio_fwd_disable: if set, master priority is ignored and NoC's default priority is used.
+ * @num_ports: number of @ports
+ * @port_offsets: qos register offsets
+ */
+
+struct qcom_icc_qosbox {
+ const u32 prio;
+ const bool urg_fwd;
+ const bool prio_fwd_disable;
+ const u32 num_ports;
+ const u32 port_offsets[] __counted_by(num_ports);
+};
+
#define MAX_LINKS 128
#define MAX_BCMS 64
#define MAX_BCM_PER_NODE 3
@@ -58,6 +87,7 @@ struct bcm_db {
* @max_peak: current max aggregate value of all peak bw requests
* @bcms: list of bcms associated with this logical node
* @num_bcms: num of @bcms
+ * @qosbox: qos config data associated with node
*/
struct qcom_icc_node {
const char *name;
@@ -70,6 +100,7 @@ struct qcom_icc_node {
u64 max_peak[QCOM_ICC_NUM_BUCKETS];
struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE];
size_t num_bcms;
+ const struct qcom_icc_qosbox *qosbox;
};
/**
@@ -114,6 +145,7 @@ struct qcom_icc_fabric {
};
struct qcom_icc_desc {
+ const struct regmap_config *config;
struct qcom_icc_node * const *nodes;
size_t num_nodes;
struct qcom_icc_bcm * const *bcms;