[v2,2/2] dt-bindings: mmp-dma: convert to YAML
Commit Message
Convert the Marvell MMP DMA binding to YAML.
The TXT binding mentions that the controller may have one IRQ per DMA
channel. Examples of this were dropped in the YAML binding because of
dt_binding_check complaints (either too many interrupt cells or
interrupts) and the fact that this is not used in any of the in-tree
device trees.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
.../devicetree/bindings/dma/marvell,mmp-dma.yaml | 72 +++++++++++++++++++
Documentation/devicetree/bindings/dma/mmp-dma.txt | 81 ----------------------
2 files changed, 72 insertions(+), 81 deletions(-)
Comments
On Wed, 31 Jan 2024 22:26:03 +0100, Duje Mihanović wrote:
> Convert the Marvell MMP DMA binding to YAML.
>
> The TXT binding mentions that the controller may have one IRQ per DMA
> channel. Examples of this were dropped in the YAML binding because of
> dt_binding_check complaints (either too many interrupt cells or
> interrupts) and the fact that this is not used in any of the in-tree
> device trees.
>
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> ---
> .../devicetree/bindings/dma/marvell,mmp-dma.yaml | 72 +++++++++++++++++++
> Documentation/devicetree/bindings/dma/mmp-dma.txt | 81 ----------------------
> 2 files changed, 72 insertions(+), 81 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
new file mode 100644
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP DMA controller
+
+maintainers:
+ - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description:
+ Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio.
+
+properties:
+ compatible:
+ enum:
+ - marvell,pdma-1.0
+ - marvell,adma-1.0
+ - marvell,pxa910-squ
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt lines for the controller, may be shared or one per DMA channel
+ minItems: 1
+
+ asram:
+ description:
+ A phandle to the SRAM pool
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ '#dma-channels':
+ deprecated: true
+
+ '#dma-requests':
+ deprecated: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#dma-cells'
+
+allOf:
+ - $ref: dma-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,pdma-1.0
+ then:
+ properties:
+ asram: false
+ else:
+ required:
+ - asram
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <47>;
+ #dma-cells = <2>;
+ dma-channels = <16>;
+ };
deleted file mode 100644
@@ -1,81 +0,0 @@
-* MARVELL MMP DMA controller
-
-Marvell Peripheral DMA Controller
-Used platforms: pxa688, pxa910, pxa3xx, etc
-
-Required properties:
-- compatible: Should be "marvell,pdma-1.0"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
- or one irq for pdma device
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller (defaults
- to 32 when not specified)
-- #dma-channels: deprecated
-- dma-requests: Number of DMA requestor lines supported by the controller
- (defaults to 32 when not specified)
-- #dma-requests: deprecated
-
-"marvell,pdma-1.0"
-Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-
-Examples:
-
-/*
- * Each channel has specific irq
- * ICU parse out irq channel from ICU register,
- * while DMA controller may not able to distinguish the irq channel
- * Using this method, interrupt-parent is required as demuxer
- * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
- * 18~21 is ADMA irq
- */
-pdma: dma-controller@d4000000 {
- compatible = "marvell,pdma-1.0";
- reg = <0xd4000000 0x10000>;
- interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
- interrupt-parent = <&intcmux32>;
- dma-channels = <16>;
- };
-
-/*
- * One irq for all channels
- * Dmaengine driver (DMA controller) distinguish irq channel via
- * parsing internal register
- */
-pdma: dma-controller@d4000000 {
- compatible = "marvell,pdma-1.0";
- reg = <0xd4000000 0x10000>;
- interrupts = <47>;
- dma-channels = <16>;
- };
-
-
-Marvell Two Channel DMA Controller used specifically for audio
-Used platforms: pxa688, pxa910
-
-Required properties:
-- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
- or one irq for dma device
-
-"marvell,adma-1.0" used on pxa688
-"marvell,pxa910-squ" used on pxa910
-
-Examples:
-
-/* each channel has specific irq */
-adma0: dma-controller@d42a0800 {
- compatible = "marvell,adma-1.0";
- reg = <0xd42a0800 0x100>;
- interrupts = <18 19>;
- interrupt-parent = <&intcmux32>;
- };
-
-/* One irq for all channels */
-squ: dma-controller@d42a0800 {
- compatible = "marvell,pxa910-squ";
- reg = <0xd42a0800 0x100>;
- interrupts = <46>;
- };