[v3,2/5] dt-bindings: rtc: abx80x: convert to yaml
Commit Message
Convert the abracon abx80x rtc text bindings to dt-schema format.
In addition to the text description reference generic interrupts
properties and add an example.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
.../devicetree/bindings/rtc/abracon,abx80x.txt | 31 ----------
.../devicetree/bindings/rtc/abracon,abx80x.yaml | 72 ++++++++++++++++++++++
2 files changed, 72 insertions(+), 31 deletions(-)
Comments
On Fri, 02 Feb 2024 15:22:18 +0100, Josua Mayer wrote:
> Convert the abracon abx80x rtc text bindings to dt-schema format.
>
> In addition to the text description reference generic interrupts
> properties and add an example.
>
> Signed-off-by: Josua Mayer <josua@solid-run.com>
> ---
> .../devicetree/bindings/rtc/abracon,abx80x.txt | 31 ----------
> .../devicetree/bindings/rtc/abracon,abx80x.yaml | 72 ++++++++++++++++++++++
> 2 files changed, 72 insertions(+), 31 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dts:30.30-31 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1428: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240202-add-am64-som-v3-2-2f44023d50e9@solid-run.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Am 02.02.24 um 16:34 schrieb Rob Herring:
> On Fri, 02 Feb 2024 15:22:18 +0100, Josua Mayer wrote:
>> Convert the abracon abx80x rtc text bindings to dt-schema format.
>>
>> In addition to the text description reference generic interrupts
>> properties and add an example.
>>
>> Signed-off-by: Josua Mayer <josua@solid-run.com>
>> ---
>> .../devicetree/bindings/rtc/abracon,abx80x.txt | 31 ----------
>> .../devicetree/bindings/rtc/abracon,abx80x.yaml | 72 ++++++++++++++++++++++
>> 2 files changed, 72 insertions(+), 31 deletions(-)
>>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Error: Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dts:30.30-31 syntax error
Fixed in v4 by referencing "real" fake_intc0 rather than fictitious gpio0
> FATAL ERROR: Unable to parse input tree
> make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1428: dt_binding_check] Error 2
> make: *** [Makefile:240: __sub-make] Error 2
deleted file mode 100644
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
- "abracon,abx80x"
- "abracon,ab0801"
- "abracon,ab0803"
- "abracon,ab0804"
- "abracon,ab0805"
- "abracon,ab1801"
- "abracon,ab1803"
- "abracon,ab1804"
- "abracon,ab1805"
- "microcrystal,rv1805"
- Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
- resistor, the other values are in kOhm.
new file mode 100644
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers:
+ - devicetree@vger.kernel.org
+
+allOf:
+ - $ref: rtc.yaml#
+ - $ref: /schemas/interrupts.yaml#
+
+properties:
+ compatible:
+ description:
+ Select a specific compatible chip.
+
+ 'abracon,abx80x' has special meaning,
+ it provides auto-dection based on ID register.
+ enum:
+ - abracon,abx80x
+ - abracon,ab0801
+ - abracon,ab0803
+ - abracon,ab0804
+ - abracon,ab0805
+ - abracon,ab1801
+ - abracon,ab1803
+ - abracon,ab1804
+ - abracon,ab1805
+ - microcrystal,rv1805
+
+ reg:
+ maxItems: 1
+
+ abracon,tc-diode:
+ description:
+ Trickle-charge diode type.
+ Required to enable charging backup battery.
+
+ Supported are 'standard' diodes with a 0.6V drop
+ and 'schottky' diodes with a 0.3V drop.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - standard
+ - schottky
+
+ abracon,tc-resistor:
+ description:
+ Trickle-charge resistor value in kOhm.
+ Required to enable charging backup battery.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 3, 6, 11]
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ rtc: rtc@69 {
+ compatible = "abracon,abx80x";
+ reg = <0x69>;
+ abracon,tc-diode = "schottky";
+ abracon,tc-resistor = <3>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+ };